I am having a problem that when i connect my phone to my work PC my media net 3g quits working.
I have changed the option in advanced connections, server selection, to use media net on both options but i am still getting no 3g/edge etc. Everytime i sync my phone it tries to use my PC connection as the active internet source.
What i want is to have my phone synced but still use my phones 3g internet on the phone and my LAN for my PC.
Can anybody help me figure out why my phone's internet is replaced by my PC's?
Thanks!
Under "Connection Settings" do you have the box checked that says, "Allow wireless connetion on device when connected to the desktop"?
Yes i do. And when i partnered with active sync i selected the option to allow internet calling etc.
It has to be a background issue. Afaik all the options are correct.
After a little further reasearch it appears that when i connect my phone to the computer the proxy server is changed to my work proxy. If i over ride it to the correct cingular proxy it still does not work.
Any help on this? It's getting annoying. It worked fine for a week then just quit working.
Related
I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
m623d said:
I have the latest activesync but I cant connect to the internet through pie anymore. I heard there was a reg hack for this but cant find it.
Wifi works fine, but I want it to update my pocketweather whilst its sync'ing other stuff.
Click to expand...
Click to collapse
when i am at home i have to put my connections on My Isp.. when i am at work due to the firewall i have to use Work Network.. and i can surf just fine through activesync
Depending on what ROM you have, check if it has a proxy setting in your Connections tab.
latest tmobile rom.
has proxy settings, but not set, shouldn't need to.
so no one else has a problem with the latest activesync?
I'm on T-Mobile USA and i'm not having any problems with ActiveSync (Version 4.2) and T-Mobile's latest 2.26 ROM.
Can you post more information about your setup, both PC and MDA? As it could be a configuration issue.
Activesync works fine, syncs all my stuff no probs. Just cant use the internet.
I thought you could just open pie and it would automatically connect?
Can't get to internet using activesync
I can sync, but cannot update pocketweather. Any ideas?
Same problem, internet doesn't work for me at all.
Gosh dunno why I'm having such a hard time with the internet working. On my first 8125 everything went fine, internet work with activesync and wi-fi without setting anything. But now I can't seem to get them to work at all with 2 newer 8125. Try Mr. Clean rom, Molski, summitter, format my computer. None was able to get my internet back? Can anyone tell me what setting did they put inorder to get thier internet thur activiesync and wi-fi.....thou I thought it should just automatically be the same as my comp ADSL ....like before, plug and away I can update weathers and surf net?
Anyone out there, got there internet working smoothly like I had in the first time?
might have the answer, worked for me.
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
But what about eMail?
I have my TMO MDA set up for a Comcast eMail account. When I go GPRS, the eMail works fine.
But when I use Activesynch and my USB cable, I get "Cannot connect with current connection settings...."
Also, is there ANY way to have eMail give me the full message the first time, rather than requiring be me to click on the full message and reconnect?
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
I've been having the sync without passthrough for about 2 months now.
Great. When I try to go into "USB To PC" the application basically crashes. Does anyone know the registry edit that would be needed to disable advanced network functionality?
-AnarchE
thanks!
I've had a sync issue and the issue where passthrough internet didn't work for 2 months. This little change fixed both.
Thanks.
g0dblissyou said:
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Click to expand...
Click to collapse
Also check Active sync, File -> Connection settings -> this computer is connected to: -> The Internet.
This did the trick for me, now it's updating perfectly.
With my trusty old Ipaq 5550 i could, but for some reason i cant with my Kaiser.
I had a look in the manual but couldnt find this.
Any tips?
It should work automatically.
Perhaps in your comm manager, active sync is greyed out and needs to be enabled.
Or perhaps in your configuration screen: connections tab, usb on pc (or sometinglike that), you can (un)check a box about advanced network connectivity.
yes for me work You must change in Connections->Advanced->Select network first field where you have your ISP to My Work Network.
Stay0Puft said:
perhaps in your configuration screen: connections tab, usb on pc (or sometinglike that), you can (un)check a box about advanced network connectivity.
Click to expand...
Click to collapse
EXACTLY.
Mine was checked, once i UNchecked it. I had internet conectivity.
I have all default and CHECKED use advanced network functionality and it works fine, even when syncing over bluetooth I can get to the internet through ActiveSync
Thanks, been wanting to do this for ages.
Now I have got it working.
Okay, this is a long message but I have had a unique problem in which I had to fiddle with activesync and my PDA for several days to figure it out. So in case this is your problem look here.
Scenario:
At my work we have a proxy server. When i connect my phone to my computer, even though activesync and my PDA are set to connect properly neither my phone nor my computers internet works. I fooled with this, posted on the forums and finally found a way to fix it.
Steps:
1)Change your PDA's advanced network settings in the network management area to BOTH be "mywork network". Do this before plugging in to activesync.
2)load an internet page with streaming content, or constantly refresh a web page if your work blocks all sites!
3)Ensure that your activesync is set to connect to the "work network".
4)Plug in your phone (be sure that data is still streaming on your desktop, if an active connection isn't streaming on your desktop Windows uses logarithms to decide which connection to use as an internet source).
5)Let activesync load and syncronize. Once it is syncronized, go back to your pda's network management page and change the two options BACK to MEdia Net or whatever data service you use on your cell phone. NOTE: Be sure that media is streaming all the way until you change your PDA's options BACK to the proper internet source for your phone and test it by loading a web page. Once the phone is set as it's own internet source and the desktop still has it's active LAN connection you should be golden.
I know you shouldn't have to do this but at least with my works network and their proxy server if i don't do it this way i will NEVER be able to use the internet on either device.
The reason for this is because of Microsoft's crappy network capabilities. In activesync 4.0 + they made activesync use an actual network connection, you can view it via the network connection page. So with some networks (not all) it tries to use your phones connection as the active internet network and vice versa at times.
Hope this helps somebody out there as this drove me nuts!
So far i'm the only person that has had the problem (on this forum, at least that has responded to my threads). But i'm sure there are a couple other people that have annoying problems with their work and activesync.
Thanks,
Luke
Thanks a lot alaiwy, worked just fine for me!
For the AT&T Tilt & AT&T ROM's you also need to disable the Proxy.
_Dejan_ said:
yes for me work You must change in Connections->Advanced->Select network first field where you have your ISP to My Work Network.
Click to expand...
Click to collapse
TY I was looking for this finally becuase that was getting very annoying as hell to me.
I was wondering if there was a way to disable Media Net's automatic connecting whenever I open Internet explorer. I only use wifi for the internet. I disabled it using Kaiser tweak and that worked but then I cannot recieve MMS without MEdia Net enabled. I don't have a problem with it being enabled I just don't want it to automaticly start connecting. If it cant be disabled for everything but mms I would rather have a prompt.
Thanks.
MoDaCo NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
EDIT: I should have read before posting. I'm not sure about the MMS part as I don't use the NODATA program. I was just thinking on the disabling data what I did for my moms phone. Sorry.
I tried that program and it has made it easer to enable/disable MEdia Net, but If there is a way to just make it not automatically connect that would be better. I really hate being charged for the data connection when I don't want to
Has nobody else wanted to get rid of the automatic connecting?
This is the way I disabled the automatic connection on my tilt with stock at&t rom. I don't know if it will work on other kaiser models/ roms since I'm still new with windows mobile (only had the tilt for a couple of months).
go to start>settings> connections tab.
select connections, go to advanced tab.
go to select networks.
On "programs that automatically connect to the internet should connect using:"
I changed it from MEdia NET to My Work Network (since I don't use a work network it is not set up). I also switched the second option to my work network just in case.
Since "my work network" was not set up, whenever internet explorer or any other program tries to connect, it will show a "cannot connect" error unless wifi is already activated. however I can still send/recieve MMS since the MEdia net is not disabled.
If you need to use MEdia net on IE you can just switch the opiton back to media net.
I'm still fairly new to windows mobile and my tilt, and I couldn't find a way to do this after searching for days, so i just kept messing with the connections settings until i found this. This is the first time I got a chance to help someone here so I hope it's what you're looking for!
Thanks a lot, it works great!
So I thought this worked but I relized when I make Media Net not auto connect I cannot send or recieve MMS. Is there a way to only allow messaging to auto connect and then disconnect when done?
um why dont you just go to your connection settings and delete your "my connection" its not hard
If I were to do that then I cannot send/receive MMS. That is the dilemma.
go to connections and switch it to "My ISP" and delete the gprs setting from "My ISP"
Strange issue with my Tilt... when my apps try to connect to the internet using MEdiaNet they just close out... when I use them on a wifi connection they work with no issues.... Internet connection sharing also works fine when I tether to my laptop....
Currently using ROMeOS 3.5
Any ideas?
---UPDATE----------
After a hard reset this is the current status-
Apps are no longer closing out but some are getting a "cannot connect with current connection settings" message
PIE- connects with no issues
Google Maps- connects with no issues
Internet Connection Sharing- connects with no issues
Skyfire- Does not work... keeps on checking for flight mode
Email- Does not work- "cannot connect with current connection settings" message
is
settings->connections->connections->advanced->select network
set to my isp or whatever your device have named the gprs settings profile
if not change it so it is
Also if you have at&t go to start/settings/connections/connections. You should see MEdia Net with options underneath and My Work Network with options underneath it. Underneath MEdia Net, click the option set up my proxy server. Disable the option that says "This network uses a proxy server to connect to the internet." Hope this helps
I started having the same problem the other day. My pocket outlook will not connect using Media Net, I get the "Cannot connect with current settings" message. i didn't change anything before this started and I have tried all of the above suggestions. Does any one have any other suggestions? I will do a Hard reset only as a last resort. Thanx
For some reason I dont seem to be able to browse web via my mobile browser while device is connected to Activesync (USB cable)
I've checked Allow Wireless Connection and disabled high speed syncing in Conenctions USB>PC on my Xperia.
This affects email and internet data connections and apps. In internet explorer and IRIS I get a 403 error.
I have activesync as "Computer connects to Work Network"
When I disconnect from Activesync I can browse as normal.
Having gone through the usual suspects and done a search I can't seem to find anything that addresses this particular iteration of the 403 error so would gratefully accept any suggest
You don't need the "Allow Wireless Connection when connected to the desktop" ticked. (Unless you want to use WiFi on the X1 while plugged in via ActiveSync).
My ActiveSync "This computer connects to" is set to "The internet", not Work Internet.
Allow USB connections.
On the X1,
Got to Settings, Connections Tab, USB to PC.
Make sure ActiveSync (Sync with outlook) is selected, then make sure "Enable advanced network functionality" it ticked.
cheers for your reply Steve. (good collection of apps too)
These are all options I've tried already (think I've tried every combi) and I end up with the same result - as i get not data connection when i connect the USB. If I open IE or IRIS beforehand and then connect as soon as I browse a new page I get the 403.
I'm sure this didnt happen last time I tried to browse this way but have no idea what could have changed. I thought it could be a connection settings thing - IRIS has loads of options for connections and I've tried all of this, all unsuccessfully. IE doesn't appear to have any options.
Anyone know of any tweaks or reg fixes?
duplicate post
one other thing - if I go to conenction amanger and try to activate Data connection while conencted to activesync, I get sent to the Settings > Connections screen. Data connection will not activate.
I can't offer anymore help Don't know what's up with yours.
cheers anyway steve. gonna wager on a reinstall of activesync and also try on my home pc to see if this is any different.
I know GP can block using device as modem/internet sharing, but this would be different so who knows?
interestingly I've just discovered that I'm still receiving emails when this problem occurs. I wonder if something could be preventing http requests?
just to recap, this works when synced with my home PC, but when synced with my works PC I can't access http via 3g/hsdpa, nor through the PC. I can however receive emails.
As the attachment shows, the phone is connected to the HSDPA and Activesync via USB.
I've reinstalled Activesync on this PC, and experienced an intermittent connection following this - however following this short period of activity the connection halted again.