i'v boght this device from afrend how dont have no idee abut it its dead one but i can go in to the bootloader mod where it show serial on top and down on the screen v0.17 when i connect it to the pc its give USB on top and v0.17 so according to me bootloader is ok now i try to flash the rom with defrent version its stopt on 62.7% and on the screen of the device shown 50%. is there any way to reflash my device and get it back working.
You can try to load the flash from SD card.
How to update using memory card ?
Thanx !
Related
Well my Trinity had today a "password" crash so have to put in the rom again.
So decided to also put in the new radio rom ( 1.56.70.11 ) and now i cannot upload the rom because on the three color screen only appears "Serial" and even with the USB cable connected it's not detected ( i have the Olipro 1.20 ).
Can anyone explain how can i upload the rom please?
Thank you
P.S. - Just hard reseted the device but still can't get acess through USB...
I think now you should try to flash your device with SD Card method:
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
I been study whole day in the forum also didnt found anyone fail in flashing Xperia X1.
I got a Xperia X1 accidentally flash rom without flash to HardSPL.
Now the phone is power on just will goto the BootLoader mode (TriColour Screen),
But if i plug in the USB cable connect to PC then it will goto normal.Must every time need to do that way only i can use Xperia X1.And the bigger problem is when i plug in the USB cable the X1 and PC wont be connect and even i can't charge battery also.Because of the failure connection by USB i totally can't flash X1 by USB.
I really need help in this problem,hope anyone or any ROM maker help me this problem.
THX....
Try to flash your phone again with a stock rom (you can find it in the rom section) using the SDcard method
I been try to flash the stock rom UK R1AA0017 and UK R2AA010 the problem still remain.Any other idea?Anyway thank you Mopral helping me.
hao_nam1 said:
I been try to flash the stock rom UK R1AA0017 and UK R2AA010 the problem still remain.Any other idea?Anyway thank you Mopral helping me.
Click to expand...
Click to collapse
try and use the sd card method to flash a stock rom..since your phone is booting the bootloader it shld be able to pick up the rom, hope u get it fixed
While in the boot loader (tricolour screen)
- Copy your RUU_Signed.nbh ROM file to the CustomRUU folder (where you have ROMUpdateUtility)
- Run "ROMUpdateUtility.exe"
- Connect your phone to the PC, text at bottom in tricolour screen will change from Serial to USB
- Follow on-screen instructions, loading bar shows on PC & phone
lakeside00
I been try to flash the stock rom by sd-card,problem remain only.
Musse_1
Friend my problem is i totally can't connect my phone in pc.No connection between them.That why i only can use sd-card to flash.
Guys i been flash R1AA0017 and R2AA010 rom in my phone by sd-card also can't work,problem remain.
No PPL willing to help me about my problem?
Can i asking a stupid and crazy question?
Can i flash Hard-SPL by SD-Card?
Will any things happen if i use this way to flash Hard_SPL?
Plz get someone give me a idea about my case.....
you can try but as your own risk.
extract the kovsimg.nbh to sd card root directory
HSL_SD_download
About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!
Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!
looks pretty much the same like my trinity right now...
help would be very appreciated
Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry
Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::
Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)
Hi guys
Originally i had a HTC touch pro 2 from Vodaphone with win6.1 i tried to put the new energy rom on by following the guide here:
(flashing via activesync)
http://forum.xda-developers.com/showthread.php?t=550540
with this
ROM:
EnergyROM_21876_RHOD500_24.Nov.2009_Standard
it goes past the start up screen "Touch pro 2" and then it stops on with a white background, at the bottom of there screen it displays
B 80
R 4.49.25.17
P 61.44tc.25.32U
D Energy ROM
the multi colour screen info shows
RHOD100 32M ss-BC
SPL -0.85.0liNex
MicroP(LED 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
508,533 800,851
800,208 209,208
217,852 CALIBRATED
can someone help me recover this plz its a new phone
Thanks in advance
once at that final screen,
plug in usb
once your computer has installed drivers, it will say usb instead of serial at the bottom of the phones screen.
try flashing again,if that fails try a different rom or redownload, its not bricked your at bootloader
if you still struggle use the search feature of this site, you will find everything you need
cheers steve
rosebud said:
once at that final screen,
plug in usb
once your computer has installed drivers, it will say usb instead of serial at the bottom of the phones screen.
try flashing again,if that fails try a different rom or redownload, its not bricked your at bootloader
if you still struggle use the search feature of this site, you will find everything you need
cheers steve
Click to expand...
Click to collapse
or try flash using SD card
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
cheers
indra9110
Pheeew thats a relief panic mode off now
Thanks rosebud and indra9110 for your fast replies, I got it working rosebud's way.
I downloaded the rom again and it works perfect now,
I've also got iskoot working (which was NOT working on the vodaphone 6.1 rom)
Thanks again guys
Glad to hear your phone has come back to life
everytime i try to upgrade my xda alpine which is connected to the computer thru usb craddle, it suddenly turn off n went to bootloader mode....what is the prob??? help pls pls...
now i think it goes into bootloader mode after autoconfig!!! when it ask for autoconfig, no matter i choose yes or no, it wil go into bootloader mode!! help!!!
ronan_chai said:
now i think it goes into bootloader mode after autoconfig!!! when it ask for autoconfig, no matter i choose yes or no, it wil go into bootloader mode!! help!!!
Click to expand...
Click to collapse
should have before you upgrade, remove the sim card first ...!!! you try to upgrade with an official ROM for your device for the ROM you can find it at -> http://www.shipped-roms.com/index.php?category=windows mobile&model = Alpine
No...i didnt have my sim card inside when i upgrade...and now it wil go into bootloader mode right after autoconfiguration...and it also go into bootloader mode halfway upgrading...and lost connection with the computer...so i cannot upgrade or flash it back to original rom...what sud i do??
ronan_chai said:
No...i didnt have my sim card inside when i upgrade...and now it wil go into bootloader mode right after autoconfiguration...and it also go into bootloader mode halfway upgrading...and lost connection with the computer...so i cannot upgrade or flash it back to original rom...what sud i do??
Click to expand...
Click to collapse
try to hard reset the device , this is her guide HTC Alpine hard reset
To perform a full reset
A full device reset clears memory, deletes all data, and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain. All data that you have created and programs you have installed are erased.
Press and hold the Power button, and then use your stylus to press the “soft reset button” at the same time, as shown below. Be sure you have backed up all your data on an SD card or on a desktop PC before performing a full reset. after you hard reset the device, connect to a USB sync and you Flash Room again All you have to remember, allow usb connection .... and not disabled its usb connection Okey if you still have problems you can contact me
Do i need to go into bootloader mode first before flashing?? Cause what i did was, connect it the comp, and while it is stil connected with windows mobile device centre and the phone is still in windows mobile desktop, then i run the MaUpgradeUt_noID.exe, and halfway upgrading, it just turn off n go back to bootloader mode...and then after that, it auto black out after each autoconfiguration.
And by Flash Rom, do you mean just run the MaUpgradeUt_noID.exe with all the files in it?? or there is something else i should do???
Sorry for my ignorance And ur guidance will be very much appreaciated!!!!
ronan_chai said:
Do i need to go into bootloader mode first before flashing?? Cause what i did was, connect it the comp, and while it is stil connected with windows mobile device centre and the phone is still in windows mobile desktop, then i run the MaUpgradeUt_noID.exe, and halfway upgrading, it just turn off n go back to bootloader mode...and then after that, it auto black out after each autoconfiguration.
And by Flash Rom, do you mean just run the MaUpgradeUt_noID.exe with all the files in it?? or there is something else i should do???
Sorry for my ignorance And ur guidance will be very much appreaciated!!!!
Click to expand...
Click to collapse
Windows mobile device centre?--Seems to be the Vista/Win7 driver problem. Search for it, using the Search button.
Flashing with Win7/32bit or Vista
muckelmaus said:
Windows mobile device centre?--Seems to be the Vista/Win7 driver problem. Search for it, using the Search button.
Flashing with Win7/32bit or Vista
Click to expand...
Click to collapse
EnterBL.exe should reboot the device into bootloader only, Activesync should disable then. You can access bootloader manually, it's more safe
Now i managed to get into bootloader mode and upgrade it.. but the upgrade hangs halfway, the progress stays at 0% and saying it's upgrading radio, but always failed. What's should i do pls?
ronan_chai said:
Now i managed to get into bootloader mode and upgrade it.. but the upgrade hangs halfway, the progress stays at 0% and saying it's upgrading radio, but always failed. What's should i do pls?
Click to expand...
Click to collapse
remove the battery from the device and wait until 10 minutes, then plug it in again and make sure your device go to the bootloader to reflash
next time before you perform the upgrade whether you've unlock device ??