Database Develop

hw6515 DEAD help need

i'v boght this device from afrend how dont have no idee abut it its dead one but i can go in to the bootloader mod where it show serial on top and down on the screen v0.17 when i connect it to the pc its give USB on top and v0.17 so according to me bootloader is ok now i try to flash the rom with defrent version its stopt on 62.7% and on the screen of the device shown 50%. is there any way to reflash my device and get it back working.

You can try to load the flash from SD card.

How to update using memory card ?
Thanx !

HELP!!My Xperia flash get problem!

I been study whole day in the forum also didnt found anyone fail in flashing Xperia X1.
I got a Xperia X1 accidentally flash rom without flash to HardSPL.
Now the phone is power on just will goto the BootLoader mode (TriColour Screen),
But if i plug in the USB cable connect to PC then it will goto normal.Must every time need to do that way only i can use Xperia X1.And the bigger problem is when i plug in the USB cable the X1 and PC wont be connect and even i can't charge battery also.Because of the failure connection by USB i totally can't flash X1 by USB.
I really need help in this problem,hope anyone or any ROM maker help me this problem.
THX....

Try to flash your phone again with a stock rom (you can find it in the rom section) using the SDcard method

I been try to flash the stock rom UK R1AA0017 and UK R2AA010 the problem still remain.Any other idea?Anyway thank you Mopral helping me.

hao_nam1 said:
I been try to flash the stock rom UK R1AA0017 and UK R2AA010 the problem still remain.Any other idea?Anyway thank you Mopral helping me.
Click to expand...
Click to collapse
try and use the sd card method to flash a stock rom..since your phone is booting the bootloader it shld be able to pick up the rom, hope u get it fixed

While in the boot loader (tricolour screen)
- Copy your RUU_Signed.nbh ROM file to the CustomRUU folder (where you have ROMUpdateUtility)
- Run "ROMUpdateUtility.exe"
- Connect your phone to the PC, text at bottom in tricolour screen will change from Serial to USB
- Follow on-screen instructions, loading bar shows on PC & phone

lakeside00
I been try to flash the stock rom by sd-card,problem remain only.
Musse_1
Friend my problem is i totally can't connect my phone in pc.No connection between them.That why i only can use sd-card to flash.
Guys i been flash R1AA0017 and R2AA010 rom in my phone by sd-card also can't work,problem remain.

No PPL willing to help me about my problem?

Can i asking a stupid and crazy question?
Can i flash Hard-SPL by SD-Card?
Will any things happen if i use this way to flash Hard_SPL?
Plz get someone give me a idea about my case.....

you can try but as your own risk.
extract the kovsimg.nbh to sd card root directory
HSL_SD_download

SOLVED! Bootloaders as far as it goes...Will not load any flash with SSPL or HSPL.

About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!

Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!

looks pretty much the same like my trinity right now...
help would be very appreciated

Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.

steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry

Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::

Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)

I think i've bricked my htc after flashing :( HELP plzzz

Hi guys
Originally i had a HTC touch pro 2 from Vodaphone with win6.1 i tried to put the new energy rom on by following the guide here:
(flashing via activesync)
http://forum.xda-developers.com/showthread.php?t=550540
with this
ROM:
EnergyROM_21876_RHOD500_24.Nov.2009_Standard
it goes past the start up screen "Touch pro 2" and then it stops on with a white background, at the bottom of there screen it displays
B 80
R 4.49.25.17
P 61.44tc.25.32U
D Energy ROM
the multi colour screen info shows
RHOD100 32M ss-BC
SPL -0.85.0liNex
MicroP(LED 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
508,533 800,851
800,208 209,208
217,852 CALIBRATED
can someone help me recover this plz its a new phone
Thanks in advance

once at that final screen,
plug in usb
once your computer has installed drivers, it will say usb instead of serial at the bottom of the phones screen.
try flashing again,if that fails try a different rom or redownload, its not bricked your at bootloader
if you still struggle use the search feature of this site, you will find everything you need
cheers steve

rosebud said:
once at that final screen,
plug in usb
once your computer has installed drivers, it will say usb instead of serial at the bottom of the phones screen.
try flashing again,if that fails try a different rom or redownload, its not bricked your at bootloader
if you still struggle use the search feature of this site, you will find everything you need
cheers steve
Click to expand...
Click to collapse
or try flash using SD card
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
cheers
indra9110

Pheeew thats a relief panic mode off now
Thanks rosebud and indra9110 for your fast replies, I got it working rosebud's way.
I downloaded the rom again and it works perfect now,
I've also got iskoot working (which was NOT working on the vodaphone 6.1 rom)
Thanks again guys

Glad to hear your phone has come back to life

[Q] Possibly bricked Trinity, help please!!!

Hello!
I have this problem:
I've installed WM6.5 on my Trinity, and it worked well, but today I wanted to try WM6.1 (0.4.9.0 digital) also. The following happened:
Everything worked fine, but at 54% flashing my brother lifted the phone, possibly it lost the USB-contact, because the flasing stopped with an error message (unfortunately can't remember the error number). Since then if I try to flash it with WM6.1 or WM6.5, after 1% the phone resets itself, and the RUU gives a 270 error.
I have the original WM5 ROM also, but if I try installing it, after "Verifying information on your PDA Phone" screen I get a connection error 260.
What can I do???

After the phone resets itself, I can see the HTC logo, and the red letters and numbers, but that's all.

If I try HardSPL, I also get a 260 error.

Can you enter bootloader manualy?
If you can than see SERIAL change to USB when connected to PC it should be OK.

if you have a SD card, you can also try to flash "manualy".
- put your RUU... NBH at the root of the card,
- rename it trinimg.nbh,
- reinsert the card in the phone,
- enter in bootloader (power+cam+reset)
you will have a grey screen asking to push "power", do it and that's it.
if USB is well working, maybe you just need to reflash the hardspooler.

Thank you for your replies.
Fortunately I solved the problem.
I did the following:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/atta...0&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/atta...8&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection

I m glad you solved this. Every day another new way of solving the flash problems.

Hi to All guys
i've got a trinity from my work and it has a custom rom.
I wanted to changed the rom so i download a wm 6.5 and erase the trinity with mtty. After that i try to install the rom with he RUUUupdate, but it get error 270.
Only in that moment i read on the bootloader and see that it haven't olipro or another HARDSPL installed.
So i looked for a solution and i try the unbrick with the splxploit. I did it and i get olipro on the bootloader, but i don't know how go on with install, if i use the exe i get 260 connection error.
Can you help me?