HTC Scrolling from ASerg - Wing, P4350 Herald Upgrading

More shortly, has bothered me touch a cube, and here scrolling worthy alternative I have not found it. Here has decided to leave only scrolling.
It is simple HTC Scrolling (the library is taken from the latest insertion Elf).
Only for WM6.
Now also with a sound.

Can anyone report that this cab works?

I checked, works as in HTC Touch.

well...it crashed my Hermes and i need to hard reset it....=_=

berwick said:
well...it crashed my Hermes and i need to hard reset it....=_=
Click to expand...
Click to collapse
I tested on Herald

Aserg it works with wizard thanks. But the touch scroll feeling is not as good as it is in touch enabled rom.
Thanks, i made thread for you in the wizard forum do check HERE

How to increase sensitivity of the screen? It is possible to try to change value in the register, for example, up to 3000:
HKEY_LOCAL_MACHINE \Drivers \TouchPanel \ PressureThreshold = 9812
If you will pick up correct value, it is possible to make separate cab for wizard

For wizard try with such value if sensitivity will be good I shall make separate cab.
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:2dc1

Can someone describe what exacly it does?? Is this app work like efrost's FTouchFlo???

It is taken from HTC TouchFlo.

Works on HTC Artemis (o2 Orbit)

Increase in sensitivity TouchPanel (It would be good to pick up for each device):

thanks very much now where can i find a rom without touch setting? seems all of th eroms that have been release is touch based

i crossed my fingers and try'it on my HTC Titan. And it did not work. touch screen stop working, so i remove the app and all was normal after. well was nice to try ;-)

Now also with a sound.

Thank you so much for this. Seems to work perfectly on my wing.

It would be good to leave here the responses. The information would be very useful to others.

ASerg, with sound it is working much better.Thanks Again.

ASerg said:
It would be good to leave here the responses. The information would be very useful to others.
Click to expand...
Click to collapse
Well... Tried it on my Herald (the last version with the sound). Didn`t like it - it`s too slow, i mean the reaction of the prog for the finger scrolling. Also, sometimes, it confuses scrolling directions and starts up really late (like 2-3 sec after opening and start scrolling Contacts, i.e.). But I liked the sound, it`s very useful for blind scrolling - in car, i.e..
Deleted, and went back to FtouchFlo.

How to uninstall it
Hello,
I'm using SPB Pocket Plus for scrolling and it does not work very well with your "HTC Scrolling" application.
It is possible to uninstall it ? If so - how ?

Related

the cube

I cant find a rom that has a touch flow cube. I want the black diamond rom for my wizard to work with herald. I love that rom!!
There are many ROMs here. Usually the ones that aren't labeled "lite" "slim" or "clean" have the cube but the cube has to enabled.
cube
ive tried several roms and I got one that lete enable the cube, but I dont know how to invoke it. On my wizard i invoked it by setting it to a button. Im lost.
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
You have to set it up. You can set it to use a button or a gesture. I find it utterly useless, so I'm not the expert on it.
I didn't flash one yet... I was just assuming since the 3 here all said Touch Flo No Cube...hmm...maybe I won't miss the cube after all!!
I mostly use it for the photo dialer.. haha... i have like 18 "faves" now
Oh...ttran released Open Touch v3.0 Biggy has a cube..i think..
how interesting..........
Touch-It 4.41, which is better, has a Cube.
Worked for me and most everyone else whose tried it. Apparently the problem is his and not the software's.
aad4321 said:
thats strange, for my wing, when i go into the settings, it just has a half a box, and i cant click it.... i think it may have to do with that x button cab i had to install.
Click to expand...
Click to collapse
If you installed that X Button FIX then yeah it creates a useless Icon in the programs called TF Settings.
That IS THE SOLUTION! IF YOU DONT LIKE IT GET THE HELL RID OF IT!
This has been said several time now in the forums!
mv3 said:
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
Click to expand...
Click to collapse
Well you know the cube makes your Device SOOOOOO Sloww!!
And you allready have a applaucher in the HTC Home Plug so why cube ?
well... it doesnt seem to slow down my phone.. i also have the sprint home plug-in. i like having the 2nd app launcher and photodialer.. and sometimes way more faster than going back to the today screen and having to focus on which tab, then which shortcut to push. with the cube..i could be using whatever program i'm on..then with only 1 or 2 finger gestures, i'd be at the dialer or app launcher.windows mobile apps are known to run differently on same model phone and everybody has different tastes.. just cause i liked it doesnt mean you have to also.. and really, it didn't slow down performance for me... but activesync startig up in the background, hat slows mine down!

HTC diamond home plugin

Hi everyone,
i truely believe the new 3d Touchflo is a piece of art technology, however, could anyone here kindly to link me how to install the previous HTC home plugin ...coz i found it's more easy to use at this moment.
thks alot
search my friend
http://www.google.com/custom?num=10...:forum.xda-developers.com+htchomeplug&spell=1
Rory
chocodip said:
Hi everyone,
i truely believe the new 3d Touchflo is a piece of art technology, however, could anyone here kindly to link me how to install the previous HTC home plugin ...coz i found it's more easy to use at this moment.
thks alot
Click to expand...
Click to collapse
The HTC CIO may be curled up in a corner crying now...
crying?
i think he has tears in his eyes from laughing.
why do a lot of people always insist that older is better.
touchflo 3d has way more options and is much fingerfriendlier than the old version.
so just a tip: do not use your stylus, but use your fingers. you will find that using the touch flo 3d really is a lot easier
looks beautiful runs terrible
i gave up! touchflow 3D, simply too slow and couldnt catch up with my finger.
will leave it for showing off when demo to friends only...
Yeah, it's not easier at all. It's much more work to get to the media player now, where as I could assign it to a hardware key on the Kaiser. Navigating the Kaiser with keyboard mnemonics was definitely faster and easier. TouchFLO 3D requires so much more finger/hand/eye movement in order to access the same information that would have been already on your screen right away.
I also hate having to scroll through all of the Cities in the US in order to get to Yonkers, NY for the weather. It was way easier when I could just type the name of the City in the HTC Home plug in. These iPhone-style lists are horribly frustrating to use.
I, think the regular touchflo is simpler to use because it is exactly that (simple) & boring... a few tabs and thats it. However TouchFlo3D has much more options, looks sweet, touch friendly & interactive; the fact that it takes more time to getting use to or figuring out does not bother me at all.
With this new plugin I rarely see the windows UI and I think that makes a huge difference, at least for me it does.
Another point to consider is how you use the device or what for? I use it primarily for the web, weather, texting & GPS & all of these are extremely easy for me to get to. As far as the extra scrolling to choose a specific city under weather should not be in issue, I set my city & a couple others in no-time when I got my phone and that's it no more scrolling.
I remember some time ago nokia, samsung, SE, mortorola etc all the big names done some stuidies and figured out the max number of key presses it should take to get to ANY menu option. It seems with all this fancy scrolling lists and interfaces thats lost now.
Even in an iphone - which you may hate, but is probably the best touch interface - its not exactly fast to get to things.
someone1234 said:
I remember some time ago nokia, samsung, SE, mortorola etc all the big names done some stuidies and figured out the max number of key presses it should take to get to ANY menu option. It seems with all this fancy scrolling lists and interfaces thats lost now.
Even in an iphone - which you may hate, but is probably the best touch interface - its not exactly fast to get to things.
Click to expand...
Click to collapse
I've said this before - in experiments comparing the iPhone and the old TouchFLO, it was faster on average to get to things using TouchFLO.
adamz said:
Yeah, it's not easier at all. It's much more work to get to the media player now, where as I could assign it to a hardware key on the Kaiser. Navigating the Kaiser with keyboard mnemonics was definitely faster and easier. TouchFLO 3D requires so much more finger/hand/eye movement in order to access the same information that would have been already on your screen right away.
Click to expand...
Click to collapse
Well, the devices are aimed at completely different markets. HTC generally aim their devices with keyboards at business users, whereas the Touch Diamond is a high-end general consumer product.
slickvic said:
i gave up! touchflow 3D, simply too slow and couldnt catch up with my finger.
will leave it for showing off when demo to friends only...
Click to expand...
Click to collapse
There are now tweaks that will speed up TouchFLO 3D quite a lot. Search this forum.
so......
will the old type of htc home plug in work with diamond?
i too was happy using it (on my trinity)
would be nice to have the choice
with the tabs you had people..weather apps...and more
so does anyone know before i bugger my diamond up
I think TouchFlow 3D is great, easy to use and looks very nice.
The only thing I'm missing are my tasks on the Todayscreen. On my Touch I used them as a reminder for certain things, but when you don't see them right away when turning on the phone they're useless.
I installed a Version of HTC Home Plugin earlier today on my dad's diamond and well... i guess it just isn't fit for a VGA Display. It is very small and the porportions are messed up. Anyone already tried to get HTC Home to work or knows of any VGA Version maybe?
I used to use Touch Commander on my Asus P750, as far as I'm concerned it's an exact copy which will work in VGA mode, as the P750 also had a VGA screen.
http://www.touch-commander.com/
But then again, with Dutty's ROM and the registry tweaks, TF3D runs pretty smooth.
Htc home vga
Samson711 said:
I installed a Version of HTC Home Plugin earlier today on my dad's diamond and well... i guess it just isn't fit for a VGA Display. It is very small and the porportions are messed up. Anyone already tried to get HTC Home to work or knows of any VGA Version maybe?
Click to expand...
Click to collapse
Alright, I have had this issue too. Here is a cab for the Home Plugin for VGA devices (works on my TP).
I AM NOT TAKING CREDIT FOR THIS, JUST SHARING THE .CAB I FOUND SOMEWHERE ON THIS FORUM LOOKING FOR THIS. MADE BY PJC
Hope this helps out those who need it.
EDIT: For some reason could not upload file, nonetheless, I found the download, click on the link and download. http://rapidshare.com/files/128745613/PJC_HTCHome.cab
Also, for those that want the thread and updates from it: http://forum.xda-developers.com/showthread.php?t=406418

Adding HTC Cube to Diamond ?

I'm about fed up with TouchFlo 3D, nice but pretty useless and I REALLY miss the Cube from my Touch Dual, much more convenient and doens't waste CPU cycles, so...has anyone installed it on the Diamond ?
Found a few existing CUBE topics, but not sure if there might not be interference and if a VGA skin is needed.
Topics : http://forum.xda-developers.com/showthread.php?t=343583 and http://forum.xda-developers.com/showthread.php?t=348437
Ok had to hard reset...
Was hopeful after a post by SecureGSM :
"HKLM\Software\OEM\TFLOSettings:
also, there is one that is suppose to enable cube finctionality there:
EnableCube : default value (0) <--change that to (1)"
But not working for me.
Its not so simple as switching cube on. Cube is simply not there in our Diamond. If u try to install this Cube configurator from the Elf thread, u'll see a multitude of errors, missing files, etc. Cube may be functional here, but we'll be needing all those files
Yes, that sucks, the CUBE is x times more useful than TouchFlo 3D IMHO.
There must be a way though because it was added to non touch devices.
i dun think we'll have to descend to the non touch method, they use flash. i'm sure if we can get the Touch Cruise for example, and get their files, and put it in, it should work? i think
Catching up, I also thought this would do it http://forum.xda-developers.com/showthread.php?t=348437 but so far no luck either.
bump - hope someone can figure it out ;-)
Another bump, that would be such a useful addition, I'm sure the bright minds around here can figure how to add the Cube back ;-)
have u tried Touch Commander?
Not sure, got a link ? I tried the tools linked in the first message and no go, had to hard reset.
I know a guy who might be very good at this ... Duttie or something like that
Unfortunatly, he is not around (yet)
Sounds good, hope he joins us soon !
Have you considered something like this:
http://www.spbsoftwarehouse.com/products/mobileshell/?en
There are a couple of other similar GUIs out there and the good thing about them that they all VGA optimized.
to add one more
http://www.pointui.com/Home.aspx
and it's variation by GSmart
http://www.smartdevicefreeware.com/gsmart-windows-mobile-touch-gui/
Thanks, but what I like about the cube is up and down the gesture to bring the contact list and then left to right for the various tools. The Contact list would be enough actually.
bumping it up ;-)
obender said:
to add one more
http://www.pointui.com/Home.aspx
and it's variation by GSmart
http://www.smartdevicefreeware.com/gsmart-windows-mobile-touch-gui/
Click to expand...
Click to collapse
gsmart just buggerd up my diamond....
i won't be trying that again in a hurry
this looks good if they can get it to fit our screen
http://forum.xda-developers.com/showthread.php?t=417825
Any news guys ? I was so happy with my Touch Cruise but bought the Diamond for the 640x480 screen and faster video playback.
The TouchFlow 3D looks fine but it's very useless to me, The old TouchFlo Cube from the cruise could be swept away and you had your normal windows todayscreen.
I tried the Cube thing SPD Mobile Shell but the old originall CUBE is way better I think.
Any solutions ?
Bump!!! I Want The Cube!!!!!!
same here, in fact I want it so much I've stuck with the HTC Touch Dual, aka Nike !

touch driver to accurate touch

Hi all, i have the Duttys Diamond rom on my Tilt, but the touch is not very good, some times doesn't respond at the first press, or when i press one spot it runs another.
With the original att rom runs just perfect.
i have also a htc wizard and with some diamond rom , and the touch works fine and very accurate.
What can i do to fix or upgrade the touch driver on my tilt?
(I don't have touchflo) But i would like to....
Disable TouchFlo and go to Settings > System > Screen - and realign your screen.
Also use KaiserTweak (I think that one) and adjust the sensitivity of your screen.
I think you lower the threshold to make it more sensitive. At least, that's what threshold should mean.
My tytn2 has the same problems sometime with HyperDragon IIIr most of the time its fine but every now and again i have to press harder than i should or tap the screen 2 or 3 times to make it respond. I have the pressure threshold set to 400 in Advanced config. Maybe its a bug with certain cooked roms.
As for the pressure threshhold, theres a reg key HKLM/Drivers/TouchPanel/ I think and you should raise that.
another problem could be that atleast in my experience, I have seen this happen when I didn't have the correct SPL and didn't hardreset after flashing a rom.
wow i just disabled touchflow and my screen is super accurate.
hmm... that is a horrible thing to find out.
well. maybe somebody can make a hack to enable touchflow only when using certain apps. Like file explorer, and contact, and IE.
Kuz I have been having a hard time dialing. It touchflo was disabled, it would be much better.
yay adarsh said:
As for the pressure threshhold, theres a reg key HKLM/Drivers/TouchPanel/ I think and you should raise that.
another problem could be that atleast in my experience, I have seen this happen when I didn't have the correct SPL and didn't hardreset after flashing a rom.
Click to expand...
Click to collapse
changed it from 400 to 600 and its like flying!
i am running DK FINAL ROM
go to regedit._ HKEY_LOCAL_MACHINE-->HIT THE + --> DRIVER-->TOUCHPANNEL-->400 DEFAULT CHANGE TO 600
jraborg86 said:
changed it from 400 to 600 and its like flying!
i am running DK FINAL ROM
go to regedit._ HKEY_LOCAL_MACHINE-->HIT THE + --> DRIVER-->TOUCHPANNEL-->400 DEFAULT CHANGE TO 600
Click to expand...
Click to collapse
I think it worked for me, (i dont know how to disable touchflo with Duttys rom).
will update later.
thanks for the help.
Paulo.

New to Diamond2, just required some basic help.

Hi everybody, I recently got a Diamond2 and found that the enormous amount of expertise and help available at xda-developers have really helped me enjoy this phone. The phone is not locally supported by any carriers or retailers in Canada so the availability of these forums have been a real help. I've run through most of the issues I've had with the phone (really like the Pro2 Interface better but was way to bulky) but have a few remaining that I haven't been able to find satisfactory answers for, hope you guys will be able to help.
I've downloaded and played around with what seem to be most of the prerequisite softwares: Advanced Config Tool, Klaxon, Changescreen etc. and have also made a couple of registry modifications to enable TF3D rotation and things like that. Here is where I'm getting into a bit of trouble. Although changescreen is a great app I just don't like to install a lot of things on my device and decided to try the regedit. After a soft reset it seemed to work great but was quite slow in switching over to landscape and back. At first I though this was a problem with the g-sensor so I opened up Opera to try it out and found that it was much faster. Obviously it's a lot less graphically intense but I was playing around with a Touch Pro2 before I bought the Diamond2 and it is also significantly faster, with the same processor and everything. I've tried to reduce the sampling time for the g-sensor down from 200ms to 100ms in ACT but that didn't really seem to help. Also I get some really weird lines across the tops of TF3D pages in landscape; in the All Contacts page for example the bar that contains "Search Contacts" will have at least three sets of distorted lines across it at regular intervals across the page. The wallpaper also seems to malfunction as instead of staying as it was, it will stretch across the width of the screen and as a result become extremely distorted. The dialer doesn't go into landscape but that seems to be a common issue. I've downloaded the Rhodium Phone Dialer although I haven't had a chance to install it yet, maybe that will fix the dialer issue.
I do have some app installed that changes the background of all tabs to be the same and this seems to have messed with the transparency of the tab bar and, occasionally the phone will fail to respond to screen swipes that would usually cycle through the tabs without using the tab bar. Maybe this app is also causing the other problems.
The help on these forums has already been a great asset and I was just hoping that I would be able to get some simple fixes for the issues with the landscape thing without having to install more software. Thanks in advance for any help, its all appreciated. Cheers.
PS, rom is 1.39.421.0 (47382) WWE
what you can do to improve things:
1. ditch stock rom and use tess rom
2. install flipit for rotation software - its better than the rest IMO
Thanks for the quick reply
Thanks for the quick reply, sorry I wasn't able to reply right away, got a bit busy at uni.
I was a bit apprehensive about installing a new rom but the one you recommended is amazing. The speed increase alone is unbelievable, doesn't even feel like the same device.
Everything is working great and the rotation is really fast now on everything except TF3D. It almost looks like it attempts to rotate and then fails. The title bars rotate around and then rotate back. I've added the regedit, manually removed and added it back into flip_it, but nothing seems to be working. Aside from that everything else seems perfect. Hope you'll be able to help, and once again, thanks.
oh yeah.. forgot to mention about manila in landscape
go to search and look for At0mAng & Danny_and_2 TF3D2 Tweak cab for topaz
install, and in the list of programs, there is option called Manila Rotate ON.
and thats it, you are all set...
hope this helps
joseph.sapri said:
1. ditch stock rom and use tess rom
Click to expand...
Click to collapse
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks
Goondu said:
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks
Click to expand...
Click to collapse
tess = topaz essential
http://forum.xda-developers.com/showthread.php?t=529260
Almost there
Thanks for the tip about the tweak program, installed it and followed your directions, manila is now rotating. However, its still incredibly slow; in the range of 3-5 seconds for transition to landscape and then around 1-2 seconds back to portrait. Also, those distortive lines I described earlier are back.
I was hoping for the kind of speed seen here http://www.youtube.com/watch?v=MPVgN5QuzO4 but I do realize that its a different rom. I've disabled and enabled TF3D and also done a soft reset, but no speed increase. I was thinking it may be a hardware issue but everything else works fine. One thing I have noticed though is that since installing this rom some programs get stuck half rotated and the other half of the screen will display the TF3D home page. Once again, thanks for all the help so far.
P.S. If I disable TF3D the blank today screen will rotate at the same speed as in that video if not faster. Also before when the menus rotated but not TF3D they were rotating at the same fast speed.
yes, I know what you mean.. at this stage, manila rotates pretty slow for me too...
I guess at the moment, we have to live with it... the slow rotation only happens on tf3d2 rite? the rest is ok...
as with hardware issue, I am sure it is not, cause topaz is still relatively new...
btw, Manila 2.1 is around, and manila 2.5 is coming too... so, maybe they would give better performance .
btw, the youtube link is a rom made by Tom Condon, and as you probably know, he is very active in building rom for topaz too... why dont you give him a message, or try his rom...
Tha
sorry double post again..
Sounds good
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.
mukhan said:
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.
Click to expand...
Click to collapse
if you follow tess forum, then the next release would have manila 2.1
Thanks
Ye, sorry about that didn't quite follow the forum all the way, I guess I'll be waiting. Thanks man.

Categories

Resources