touch driver to accurate touch - Tilt, TyTN II, MDA Vario III Themes and Apps

Hi all, i have the Duttys Diamond rom on my Tilt, but the touch is not very good, some times doesn't respond at the first press, or when i press one spot it runs another.
With the original att rom runs just perfect.
i have also a htc wizard and with some diamond rom , and the touch works fine and very accurate.
What can i do to fix or upgrade the touch driver on my tilt?
(I don't have touchflo) But i would like to....

Disable TouchFlo and go to Settings > System > Screen - and realign your screen.
Also use KaiserTweak (I think that one) and adjust the sensitivity of your screen.
I think you lower the threshold to make it more sensitive. At least, that's what threshold should mean.

My tytn2 has the same problems sometime with HyperDragon IIIr most of the time its fine but every now and again i have to press harder than i should or tap the screen 2 or 3 times to make it respond. I have the pressure threshold set to 400 in Advanced config. Maybe its a bug with certain cooked roms.

As for the pressure threshhold, theres a reg key HKLM/Drivers/TouchPanel/ I think and you should raise that.
another problem could be that atleast in my experience, I have seen this happen when I didn't have the correct SPL and didn't hardreset after flashing a rom.

wow i just disabled touchflow and my screen is super accurate.
hmm... that is a horrible thing to find out.
well. maybe somebody can make a hack to enable touchflow only when using certain apps. Like file explorer, and contact, and IE.
Kuz I have been having a hard time dialing. It touchflo was disabled, it would be much better.

yay adarsh said:
As for the pressure threshhold, theres a reg key HKLM/Drivers/TouchPanel/ I think and you should raise that.
another problem could be that atleast in my experience, I have seen this happen when I didn't have the correct SPL and didn't hardreset after flashing a rom.
Click to expand...
Click to collapse
changed it from 400 to 600 and its like flying!
i am running DK FINAL ROM
go to regedit._ HKEY_LOCAL_MACHINE-->HIT THE + --> DRIVER-->TOUCHPANNEL-->400 DEFAULT CHANGE TO 600

jraborg86 said:
changed it from 400 to 600 and its like flying!
i am running DK FINAL ROM
go to regedit._ HKEY_LOCAL_MACHINE-->HIT THE + --> DRIVER-->TOUCHPANNEL-->400 DEFAULT CHANGE TO 600
Click to expand...
Click to collapse
I think it worked for me, (i dont know how to disable touchflo with Duttys rom).
will update later.
thanks for the help.
Paulo.

Related

HTC Scrolling from ASerg

More shortly, has bothered me touch a cube, and here scrolling worthy alternative I have not found it. Here has decided to leave only scrolling.
It is simple HTC Scrolling (the library is taken from the latest insertion Elf).
Only for WM6.
Now also with a sound.
Can anyone report that this cab works?
I checked, works as in HTC Touch.
well...it crashed my Hermes and i need to hard reset it....=_=
berwick said:
well...it crashed my Hermes and i need to hard reset it....=_=
Click to expand...
Click to collapse
I tested on Herald
Aserg it works with wizard thanks. But the touch scroll feeling is not as good as it is in touch enabled rom.
Thanks, i made thread for you in the wizard forum do check HERE
How to increase sensitivity of the screen? It is possible to try to change value in the register, for example, up to 3000:
HKEY_LOCAL_MACHINE \Drivers \TouchPanel \ PressureThreshold = 9812
If you will pick up correct value, it is possible to make separate cab for wizard
For wizard try with such value if sensitivity will be good I shall make separate cab.
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:2dc1
Can someone describe what exacly it does?? Is this app work like efrost's FTouchFlo???
It is taken from HTC TouchFlo.
Works on HTC Artemis (o2 Orbit)
Increase in sensitivity TouchPanel (It would be good to pick up for each device):
thanks very much now where can i find a rom without touch setting? seems all of th eroms that have been release is touch based
i crossed my fingers and try'it on my HTC Titan. And it did not work. touch screen stop working, so i remove the app and all was normal after. well was nice to try ;-)
Now also with a sound.
Thank you so much for this. Seems to work perfectly on my wing.
It would be good to leave here the responses. The information would be very useful to others.
ASerg, with sound it is working much better.Thanks Again.
ASerg said:
It would be good to leave here the responses. The information would be very useful to others.
Click to expand...
Click to collapse
Well... Tried it on my Herald (the last version with the sound). Didn`t like it - it`s too slow, i mean the reaction of the prog for the finger scrolling. Also, sometimes, it confuses scrolling directions and starts up really late (like 2-3 sec after opening and start scrolling Contacts, i.e.). But I liked the sound, it`s very useful for blind scrolling - in car, i.e..
Deleted, and went back to FtouchFlo.
How to uninstall it
Hello,
I'm using SPB Pocket Plus for scrolling and it does not work very well with your "HTC Scrolling" application.
It is possible to uninstall it ? If so - how ?

? about dutty's wm6.1

i just installed dutys wm6.1 release, and is there a way to fix it so i dont have to tap the screen so hard to select something?
You can install KaiserTweak to increase the screen sensitivity to a more desirable level.
Dramacydle said:
You can install KaiserTweak to increase the screen sensitivity to a more desirable level.
Click to expand...
Click to collapse
ah thats right, i had it instaleld before i instlaled the new rom i forgot. thanks.
Time and Date issues...
Hi..
Just installed this excellent rom but the Time and Date format are wrong.
Even when set to thecorrect one (English British) it still does dates wrong (mm/dd/year) - and thats after a reset.
Strangely, the pages in the place where u can manually set them show them as being right...!
Any ideas?
Andrew

New HTC Rom, Display slower than before?

I just installed the new HTC Rom on my TyTN II. At first, it seemed snappy. Once I installed some Today plugins, switching from landscape to portrait and back still took about 2 seconds, but it didn't redraw the screen as in the past, the new layout (after 2 seconds) just appeard all intact. Seems they are building the screen in memory before displaying double buffering) it. This made it appear "snappier".
I installed PocketCM v1.5, which was always very fast for me. With the updated ROM the contact list still scrolled vertically just fine, but the side to side transitions tear and stutter.
Is anyone else noticing this behavior?
lol thats why I have stayed away from official releases untill I hear a forum full of happy XDA-ers
Well, some of us have to be the first to try these things out for the rest of you.
hahaha i used to be like that. I remember the flash happu days lol, but recently ive seen nothing but problems with official releases so have given up FTM
I currently use Duttys WM 6.1 WWe dated 04/16/08 and its the fastest release ive used so far
Hi,
try to change registry value on in touch flow settings - to value more then 200.
I am using value 900 - and machine is pretty quick even in the newest WM6.1
I also think this is a lot slower. Especially when opening programs and such wish I'd stayed with custom rom from sleuth. In fact might flash back.
pkoubek said:
Hi,
try to change registry value on in touch flow settings - to value more then 200.
I am using value 900 - and machine is pretty quick even in the newest WM6.1
Click to expand...
Click to collapse
It's already set to 400. The horizontal transitions in PocketCM are not based on a finger swipe, but by tapping an icon...so the Touchflo settings for that aren't the issue. The transitions stutter and tear without touchflo.

Butler - new features

Hi there,
I just picket up the code of butlef app made by siggie1970
Butler - Using capacitive area as stroke launcher and many more features
Original thread: http://forum.xda-developers.com/showthread.php?t=464611
I decide to put some new features like layout change on keyboard slide out. It is useful for stoping SIP poping out. You can point to nullkb or any other layout.
Setings available in registry by any registry editor or by AdvancedConfig (configuration file and only Butler section for config file below)
New features added:
1. Feature lets you to set keyboard layout on keyboard slide in/out.
defautl values for IN - Full Qwerty, for OUT - nullKB. Configurable via registry keys:
EnableSIPChangerKbd
KbdInSIP
KbdOutSIP
2. (Butler1.2) After slide in (in my Rom) some services or apps ?? sets back the Compact layout. So double check added to butler - if after slide in 2sec keyboard was changed to something else but not the KbdInSIP, butler sets it again, otherwise no action performed.
that's more like it! I'll check it out after my ROM release, I'm currently building it right now
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
le_cactus said:
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
Click to expand...
Click to collapse
Good idea about "HKCU\ControlPanel\Profiles" Next release...
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
lbhocky19 said:
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
Click to expand...
Click to collapse
Yes, it lets you to change both. Separate registry keys for configuration.
No setings - you can use AdvancedConfig or registry editor. I thing that setings
is not used often and application would be bigger and more complex. So no plans for setings.
After install it will overwrite registry setings. If you want to keep old ones - save.
i had added the settings into advanced config for the old version
are you able to see the new feature of keyboard out sip setting in there? i only see the old settings so far
(and what is the number letter code for nullkb? thanks) im an idiot i searched around the interweb finally got the code then went to edit the setting and realized it was arleady set to nullkb blah but great job with the update coudlnt be happier
I had tried to use Butler with NATF ver 4.1 and it frooze the phone at the reboot screen. I had to do a hard reset, do you know if this version has the same issue?
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
le_cactus said:
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
Click to expand...
Click to collapse
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
linuxis said:
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
Click to expand...
Click to collapse
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
pfcsabre said:
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
Click to expand...
Click to collapse
Good idea, thanks. I'll try that also
linuxis said:
Good idea, thanks. I'll try that also
Click to expand...
Click to collapse
Let me know if that works because I don't see the point of having the SIP initialized on startup in the code-- Butler will be detecting the change of stylus in/out (or in your case slide-in/slide-out) anyway when the main thread starts (correct me if I'm wrong about this )
Which ROMs work
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
PDAVIET V12 - Freezes on boot up with keyboard showing
PDAVIET V13 - Freezes on boot up with keyboard showing
DA_G Kitchen ROMS - Freezes on boot up with keyboard showing (at least the ones I cooked)
Off topic, with a combination of SlideActions & KforTouchPro (and butler for the null keyboard) I now have my SIP's and keyboard working like the should. XT9 when needed, and MS$ driver when the keyboard is slide out. So now I can actualy use the keyboard in iGO8 en Ctrix clients!
Thanks!
Cheers
Cacti
Confused Stu said:
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
Click to expand...
Click to collapse
RREv4 freezes as well
Alternativly, although not quite as developed as butler, TouchLockPro now allows for the launching of programs/command parameters for capacitive swipes and actually adds four more capacitive swipes than what butler does. Likewise it does NOT freeze upon start up for whatever reason on any rom I've tried.
proven works
[BUG] Problem with Manilla.
It has problem with manilla. After launching app its a must to change active tab if you want launch this or another app again.
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
whiteblazer01 said:
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
Click to expand...
Click to collapse
Yes, Butler doesn't impact on the touch sensitive circle area at all, it only notices and interprets light swipes over the call/home/back buttons.

[ROM] WM6.5.3 28205 with Palm OEM

like in thread. I cooked WM6.5.3, build 28205 with Palm OEM. All works: sleep with red button, messaging etc. Without CHome etc (lockscreen too).
Known bug is not opening Start after tapping icon on the screen. You must open Start with hardbutton.
Please test, I try to fix any bugs you find
Download: CLICK
phone need to be hard spl unlocked?
nice work!
but :
1. when you push the phone buttom there is a white sqare that stay for ever...
2. you can choose ringtone only from the phone itself and not from the card.
libal said:
1. when you push the phone buttom there is a white sqare that stay for ever...
Click to expand...
Click to collapse
oh, really ? I fix this when I could.
Thanks for your efforts! The WM6.5 work for the Treo has slowed to a crawl. Nice to see there are a few of us that still like the Treo's form-factor.
Wow, I really like this ROM. I thought nav's was cool, this is even better! As with nav's ROM, I'll pitch in with some bug reporting.
-Palm's messaging app cannot be closed. It can't be exited, apparently, when I tap the close button on the bottom right it won't close the program. I used Wakutask to minimize it but that's the closest way to minimizing it on one tap (another way to minimize it it to open Start ->Show Today and it should go to the RAM.) Unfortunately, I am unable to use the Task Manager to close it as well. Only a Reboot will clear it away.
-Where is the "Keyguard" control panel applet? I want to turn off keyguard but cannot find the option.
Some other none-Palm related issues:
-When I install FileExplorer Ext, it freezes the phone randomly. Could be a probem with it, so I use Resco explorer for installing cabs :/
-HTC Task Manager doesn't work. Does anyone know which task managing progam is good for the new close button position?
-The aforementioned Waku Task works as designed, but as I mentioned earlier the close button no longer works at the top right (it would if you enable X-button skinning), but having active tasks still on the top bar is great
So, seeing how good this ROM is, minus the above issues, I'm wondering what should we call this ROM? Mietas edition?
Thanks again fo keeping the Treo alive!
more bugs
1.it did not let me to install new programs. I did an hard reset and then i succeed to install softwares.
2.i installed spb keyboard, and when i entered to menu in this software it freez and i needed to do a reset.
Oh this is issue is tottaly awesome. I didnt hope, that someone make new stable rom, with palm oem things. how much free ram is after installation? Want you fix the remaining bugs shortly? I didnt already install it, but i'm going to try it tomorrow.
Many thanks from treo user from czech.
I fix bugs as soon I get a Treo. Probably this week.
Thanks for reporting bugs so much
What about stability, RAM etc?
Finally had the chance to install it. Nice work!
1) I have to admit that I do miss the 'Zune' look of the earlier version's homescreen, but will gladly give it up for the stability and features of this ROM.
2) I had an issue trying to select a ringtone on the Phone Settings Screen. It looks like there is an extra dropdown menu covering up the one where you actually select the ringtone. Once you managed to select the proper dropdown, you could change the ringtone, it just took a little fiddling.
3) When I tried changing themes for the today screen, once switching off the AT&T screen, I couldn't get it back the way it was before the switch. Some of the menus, fonts, and graphics had changed (for example the lower menu bar on the home screen), and the only way I could find to restore it was a hard reset.
4) As others have said, clicking on the Windows logo on the home screen doesn't do anything. You have to use the Windows button on the keyboard.
5) I didn't have the issue reported by mangatron regarding the Messaging app. Mine seems to work fine.
6) The Phone button issue reported by libal is present for me too. It appears to be the menu box that popped up when pressing the phone button, only it goes blank, and as reported it does not go away by leaving that screen. Soft reset does clear it.
Any chance you could share your kitchen with us? This would allow us to make a few of these fixes and will allow us to port to other versions.
Also - When using any mail program it will not allow any reply to an email.
Hmm, Messaging app works fine now. Maybe I had to receive a few sms first, or I suspect my sim card wasn't playing nice with the ROM.
I also use AE Button Plus to map the OK button to actually close programs. That does wonders.
The old battery indicator that used to be in WM6 is half in the top bar. Well, I say half because I can see a part of the lightning icon (when you charge your phone), and a bit of the left shows up. Any way to clear that? Or a bug maybe...
I would like to note people using this ROM for the first time:
-It's always best to clear data after flashing ROM's. Hold Power button and press the Reset button underneath the MiniSD cover. That should clear the old installation setup you had previously, which should fix installation errors.
-The phone may seem sluggish at first setup, just wait for it to load what needs to load, and after you soft reset, everything should be smooth.
-For those that wonder about program compatibility, I tested a WM2003 era program (MADE Text Editor), and it simply overwrites the bottom bar with it's WM2003 style icon style bar. Works fine
As for stability, RAM, the phone operates a bit slower than WM6.1. SKTools benchmarks puts the graphics rendering nearly 100 points lower than WM6.1, and almost 200 points lower than nav's WM6.5 ROM. Maybe if we use his specialized ATI dll it might be faster? Because the CPU is also a bit slow, but only by 1 point, although RAM access time and Main Storage Read/Write is the same as WM6/6.1. I don't really want to tax the RAM, I tested Opera Mobile 10 Beta 2u and it operates the same way as on WM6/6.1. I don't want to test Beta 3 because that uses up twice the RAM than Beta 2u.
So far so good though, with a little bit of fixing this ROM can be a winner
Can this be used on Treo 700WX?
or is there WM6.5 ROM for Treo 700WX?
mangatron said:
As for stability, RAM, the phone operates a bit slower than WM6.1. SKTools benchmarks puts the graphics rendering nearly 100 points lower than WM6.1, and almost 200 points lower than nav's WM6.5 ROM. Maybe if we use his specialized ATI dll it might be faster? Because the CPU is also a bit slow, but only by 1 point, although RAM access time and Main Storage Read/Write is the same as WM6/6.1. I don't really want to tax the RAM, I tested Opera Mobile 10 Beta 2u and it operates the same way as on WM6/6.1. I don't want to test Beta 3 because that uses up twice the RAM than Beta 2u.
So far so good though, with a little bit of fixing this ROM can be a winner
Click to expand...
Click to collapse
I can't readily compare to 6.1 because I haven't used it in a long time, but this ROM is definitely snappier than nav's 6.5 version. It loads faster, locks onto AT&T much faster, and web pages seem to load faster too. I'm just using it stock, I haven't added any additional software to it. I had nav's ROM on my Treo for several months, and would not go back from a performance perspective.
Having said that, I can confirm Z3rx's report of not being able to reply to emails. It just returns you to the Inbox when selecting reply either through the menu, or using the left action key. That's a big problem for me as I use e-mail quite a bit on my phone. Hope the OP doesn't disappear, as so many of the Treo 750 cookers seem to do after an initial release.
just wanted to say thanks! i also lost confidence in new wm6.5 roms for our old but good treo 750!
keep up the good work man!
startngate said:
I can't readily compare to 6.1 because I haven't used it in a long time, but this ROM is definitely snappier than nav's 6.5 version. It loads faster, locks onto AT&T much faster, and web pages seem to load faster too. I'm just using it stock, I haven't added any additional software to it. I had nav's ROM on my Treo for several months, and would not go back from a performance perspective.
Click to expand...
Click to collapse
Hmm, I can only imagine with nav's ATI driver this Mietas ROM would be a whole lot better, nav's was good basically for font rendering (pretty much every program launched) and Camera quality. The rest, was like you mentioned, it wasn't optimized in a lot of places, most notably for it's RAM management and I would suspect CHome/Titanium existing in his ROM further slowed it down.
Other than that, isn't signal clarity/reception dependant on the Radio Firmware version? Although I wouldn't be surprised because Nav's ROM does not pull both CAP_package and the Carrier database from EXT Rom like Mietas' ROM [probably] does (which would explain it being able to lock on faster, a similar experience I had with Tacoman's WM6.1 and the Chinese WM6.1, with Taco's pulling from EXT Rom while the CHS one didn't)
I would like to add that I currently am using the Database from what was most likely the final Official ENG ROM released by Palm, Vodafone Version 2.30 which according to my digging contains the most up to date Carrier Database (that's where all the world's wireless carrier information is kept). I could imagine if you had this you'd have even better results with your wireless carrier.
mangatron said:
Other than that, isn't signal clarity/reception dependant on the Radio Firmware version? Although I wouldn't be surprised because Nav's ROM does not pull both CAP_package and the Carrier database from EXT Rom like Mietas' ROM [probably] does (which would explain it being able to lock on faster, a similar experience I had with Tacoman's WM6.1 and the Chinese WM6.1, with Taco's pulling from EXT Rom while the CHS one didn't)
I would like to add that I currently am using the Database from what was most likely the final Official ENG ROM released by Palm, Vodafone Version 2.30 which according to my digging contains the most up to date Carrier Database (that's where all the world's wireless carrier information is kept). I could imagine if you had this you'd have even better results with your wireless carrier.
Click to expand...
Click to collapse
I'm on AT&T, and did not change the radio firmware when I flashed this ROM. On Nav's ROM I manually set up the AT&T config, but did not have to here. Could be the difference I suppose.
startngate said:
I can't readily compare to 6.1 because I haven't used it in a long time, but this ROM is definitely snappier than nav's 6.5 version. It loads faster, locks onto AT&T much faster, and web pages seem to load faster too. I'm just using it stock, I haven't added any additional software to it. I had nav's ROM on my Treo for several months, and would not go back from a performance perspective.
Having said that, I can confirm Z3rx's report of not being able to reply to emails. It just returns you to the Inbox when selecting reply either through the menu, or using the left action key. That's a big problem for me as I use e-mail quite a bit on my phone. Hope the OP doesn't disappear, as so many of the Treo 750 cookers seem to do after an initial release.
Click to expand...
Click to collapse
I agree that I hope the cook does not disappear, which is why I have asked for his cooked kitchen so I can make further improvements or port other version (23541)... however I have not heard anything back.
The email issue is a big problem as many times I can not even start a new email.
Please share your work so we can make a great rom!
Thank you, i was specting for something like this for about a year, anyone has some pictures of this new ROM working???
how the radio works how can i change the radio to get a better signal? here we have 850 umts and gsm 1800

Categories

Resources