Hi there,
I just picket up the code of butlef app made by siggie1970
Butler - Using capacitive area as stroke launcher and many more features
Original thread: http://forum.xda-developers.com/showthread.php?t=464611
I decide to put some new features like layout change on keyboard slide out. It is useful for stoping SIP poping out. You can point to nullkb or any other layout.
Setings available in registry by any registry editor or by AdvancedConfig (configuration file and only Butler section for config file below)
New features added:
1. Feature lets you to set keyboard layout on keyboard slide in/out.
defautl values for IN - Full Qwerty, for OUT - nullKB. Configurable via registry keys:
EnableSIPChangerKbd
KbdInSIP
KbdOutSIP
2. (Butler1.2) After slide in (in my Rom) some services or apps ?? sets back the Compact layout. So double check added to butler - if after slide in 2sec keyboard was changed to something else but not the KbdInSIP, butler sets it again, otherwise no action performed.
that's more like it! I'll check it out after my ROM release, I'm currently building it right now
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
le_cactus said:
Thanks linuxis,
I'll test the new slide function. Wondering what wil happen happen when the keyboard is slid out and I pull my stylus out
I'll also let you know if the errors are still there if there is no HKCU\ControlPanel\Profiles key and value like Noonski pointed out. Might wanna include the settings in the cab.
Cheers,
/Cacti
Click to expand...
Click to collapse
Good idea about "HKCU\ControlPanel\Profiles" Next release...
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
lbhocky19 said:
i have the old one
does this one let you use both sip change from stylus and keyboard? cause that was pretty much the one missing feature or is it just keyboard now?
and if i install this cab will i gotta redo all the links and such. aaand is there any settings or same reg edits only?
Click to expand...
Click to collapse
Yes, it lets you to change both. Separate registry keys for configuration.
No setings - you can use AdvancedConfig or registry editor. I thing that setings
is not used often and application would be bigger and more complex. So no plans for setings.
After install it will overwrite registry setings. If you want to keep old ones - save.
i had added the settings into advanced config for the old version
are you able to see the new feature of keyboard out sip setting in there? i only see the old settings so far
(and what is the number letter code for nullkb? thanks) im an idiot i searched around the interweb finally got the code then went to edit the setting and realized it was arleady set to nullkb blah but great job with the update coudlnt be happier
I had tried to use Butler with NATF ver 4.1 and it frooze the phone at the reboot screen. I had to do a hard reset, do you know if this version has the same issue?
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
le_cactus said:
Yup it does on certain roms. I have bo idea why some roms do and some roms dont have the problem.
Advice would still be to always make a full backup of your rom before installing this program!
Cheers,
Cacti
Click to expand...
Click to collapse
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
linuxis said:
No idea also. Mine device with ROMeOS 1.51 works fine.
One slite issue - if butler was initialised in portrait mode after slide out/int keyboar changes to one you've configured, but after few seconds it changes to compact qwerty .... if you initialize with keyboard slide out/in keyboard changes to what you've configured and stays (as it should be).
I've investigated that issue shortly, so no idea where is the issue. But I will.
It seems that not the butler changes to the compact kdb.
Does anyone has the same ??
Click to expand...
Click to collapse
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
pfcsabre said:
linuxis, I was checking the code before maybe you could disable setting of SIP on initialization? On the old code, I think it's on Butlerlib.cpp line 862 to 878.
Click to expand...
Click to collapse
Good idea, thanks. I'll try that also
linuxis said:
Good idea, thanks. I'll try that also
Click to expand...
Click to collapse
Let me know if that works because I don't see the point of having the SIP initialized on startup in the code-- Butler will be detecting the change of stylus in/out (or in your case slide-in/slide-out) anyway when the main thread starts (correct me if I'm wrong about this )
Which ROMs work
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
PDAVIET V12 - Freezes on boot up with keyboard showing
PDAVIET V13 - Freezes on boot up with keyboard showing
DA_G Kitchen ROMS - Freezes on boot up with keyboard showing (at least the ones I cooked)
Off topic, with a combination of SlideActions & KforTouchPro (and butler for the null keyboard) I now have my SIP's and keyboard working like the should. XT9 when needed, and MS$ driver when the keyboard is slide out. So now I can actualy use the keyboard in iGO8 en Ctrix clients!
Thanks!
Cheers
Cacti
Confused Stu said:
Firstly - loving Butler, it's an excellent addition to the phone and if HTC have half a brain it'll be in the next standard ROM released!
Is there any chance we could post up which ROMs work with Butler and which don't? Just thinking it'll save people some time hard resetting and setting up their phones again if they're on a non-working ROM.
Qsqa's PROven ROM 2.1 - Working fine
At0mAng V4.0 - Shows keyboard during boot up, but works fine after that
Qsqa's PROven ROM 2.2 - Freezes on boot up with keyboard showing
Elite RC3 - Freezes on boot up with keyboard showing
Anyone care to chip in their experiences?
Click to expand...
Click to collapse
RREv4 freezes as well
Alternativly, although not quite as developed as butler, TouchLockPro now allows for the launching of programs/command parameters for capacitive swipes and actually adds four more capacitive swipes than what butler does. Likewise it does NOT freeze upon start up for whatever reason on any rom I've tried.
proven works
[BUG] Problem with Manilla.
It has problem with manilla. After launching app its a must to change active tab if you want launch this or another app again.
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
whiteblazer01 said:
Does Butler still allow you to scroll zoom messages and zoom in/out in Opera?
Click to expand...
Click to collapse
Yes, Butler doesn't impact on the touch sensitive circle area at all, it only notices and interprets light swipes over the call/home/back buttons.
Related
Tired of your keyboard givingy ous entencesl iket his? Well here's the cure. This cab is a simple registry edit which will speed up the typing on your hardware keyboard.
1) Download attached file
2) Install the cab
3) Soft reset
4) Enjoy
Credit goes to JohnJonsten for the fix, as all i did was create a cab.
Here is the registry entry:
HKEY_CURRENT_USER\ControlPanel\Keybd
"InitialDelay"=dword: dec 775
"RepeatRate"=dword: dec 23
Other Fixes (By Request):
1) Use the Disable xt9 cab
2) Set suggested words to a lower number (personally I set it to 0)
3) Disable auto-correction of words.
Thanks to ATW for the sticky
Thanx for the fix, I'll try and report my feelings...
very usefull patch. amazing work.
Orange PL Stock Rome WM 6.0 Default settings are
Initial... 395
Repeat... 8
all dec
Wish I had this when Dutty's ROM used to have that problem! Thanks for putting it together!
Wow looking forward to trying it...does this do anything other than speeding up the kboard? (i.e. disabling T9?)
Worth mentioning too that turning off all the Word Completion options in the "Input" preference will also help some as well. I think all of the above is necessary for things to flow smoothly. I'm trying this right now myself, I am constantly typing crazy stuff on the keyboard for seemingly no reason.
FYI, my Tilt with ROMeOS 4.6 defaulted to 250 and 18, respectively.
Works quite well. No more typing sentence stha tend upl ookingli ke this. Easy installation and microscopic size. Excellent fix. Thank you!
Very nice! Works well.
Good call! Works great.
Thanks i'll check it out.
Thanks
This really seems to work well. I'd tried the adjustments to the sliders before, but I still had missing letters at times. I think this has done the trick.
made mines slower ...
ekw said:
made mines slower ...
Click to expand...
Click to collapse
Did your keyboard have lag to begin with? What rom are you usuing? Why would you install a fix for keyboard lag if you're not suffering from it?
thanks it works
but Can you make it faster twice???
Do you have another numerical keyboard software such as miokeyboard or htc keyboard??
becauce my miokeyboard interface is bad
thanks it works
but Can you make it faster twice???
Do you have another numerical keyboard software such as miokeyboard or htc keyboard??
becauce my miokeyboard interface is bad
can this be dled an then uninstalled if it doesnt work to what ones expectations are??? an will it make the keyboard go back to its previous function before this cab dl???
MRFERRARI23 said:
can this be dled an then uninstalled if it doesnt work to what ones expectations are??? an will it make the keyboard go back to its previous function before this cab dl???
Click to expand...
Click to collapse
It's just registry edits, so you can go back to your setting anytime you want by just changing the registry values to their original settings, without uninstalling the cab. The cab is just for those who don't like to play with the registry.
scotchua said:
It's just registry edits, so you can go back to your setting anytime you want by just changing the registry values to their original settings, without uninstalling the cab. The cab is just for those who don't like to play with the registry.
Click to expand...
Click to collapse
thanx for the reply but just wondering if i unistall it would everything go back to the way it was before installing??
Great patch, i hope someone would built one on Hermes
Or maybe, can i use reg parameter directly to my Hermes?
o.k. There seems to be two ways to solve this.
If you want to keep the software keyboard do this:
go here: http://forum.xda-developers.com/show...2&postcount=36
1. Download & install the KforTouchPro app.
2. Launch KforTouchPro (It is installed into the Games folder)
3. Click the Switch to M$ IME button.
4. Click Minimize in the lower right corner
5. Launch Logmein using PIE
6. Type away using your hardware keyboard.
If you only use the Hardware Keyboard and do not want to use KforTouchPro:
This is a simple Regedit.
[HKLM\System\CurrentControlSet\Control\Layouts\e001 0409]
(MS IME mode)
Ime File = \windows\compime.dll
Layout Text = COMP IME
-or-
(HTC T9 mode)
Ime File = \windows\eT9ime.dll
Layout Text = eT9 IME
WOO HOO!!!!!!!! Thank you very much to KevinGibert, fhsieh, and Colorado_al
ricrellim said:
I am using pie on an at&t Fuze. The keyboard does not respond? I have seen several folks on here that say they use logmein.
Is this a fuze issue or a logmein issue?
Click to expand...
Click to collapse
Same issue, on my TouchPro, with stock ROM and now with Elite ROM, same issue.
Anyone got any work around?
Same problem. Since my previous device was a Touch, I never missed/used a slide out keyboard. The keyboard works just fine on the Kaiser. I'm going to question Logmein on this issue.
glad to see i am not alone! I have been having the same problem
Yeah, one thing I dont understand is that the virtual keyboard from the apps doesnt work either...?
Also what Cab are you guys using for the remote client?
RACtrlCE?
I'm having the same issue, I think it would help if we all submitted a support ticket.
Ah, crap. Me too.
There is a workaround:
If you change your input method to the default WM keyboard by pressing to the right of the keyboard icon and choosing "Keyboard" before you start the session, you will be able to use the soft-keyboard. Still no hardware keyboard.
It sucks, but at least it works. If I can't have a fully functional LMI setup on my FUZE, I'm returning it.
colorado_al said:
Ah, crap. Me too.
There is a workaround:
If you change your input method to the default WM keyboard by pressing to the right of the keyboard icon and choosing "Keyboard" before you start the session, you will be able to use the soft-keyboard. Still no hardware keyboard.
It sucks, but at least it works. If I can't have a fully functional LMI setup on my FUZE, I'm returning it.
Click to expand...
Click to collapse
No go... that didn't work for me. I submitted a ticket and the tech did not understand what the problem was, I resubmitted. this is going to have to get resolved soon.
Nice, keep us posted, thanks for taking the time to make a ticket =)
labbbby said:
Nice, keep us posted, thanks for taking the time to make a ticket =)
Click to expand...
Click to collapse
No prob, will do.
Fix
Here's an app someone made in another thread. Basically the reason the hardware keyboard won't work with some legacy apps is because of the way the touch pro's auto completion system works. This app lets you switch it off.
http://forum.xda-developers.com/showpost.php?p=2791652&postcount=36
Has anyone had the opportunity to test this app yet? I dont have my fuze with me today because I was kind enough to swap phones with my wife today to see if she wants to upgrade from her BB Pearl.
I would love to know if this works so I can update the first post with the info.
gatordent said:
No go... that didn't work for me. I submitted a ticket and the tech did not understand what the problem was, I resubmitted. this is going to have to get resolved soon.
Click to expand...
Click to collapse
Make sure you're not using T9. On the QWERTY KBD, there is a switch for ABC - T9. Make sure it says ABC, then switch keyboards, and try it again.
Not sure, but worth a try.
I just tried the above posted CAB and it still does not work. The only keys that work... and they worked prior to the CAB were the arrow keys and the Del key.
Al,
Which ROM are you using?
I tried with this CAB in the past, didnt help.
T9 is one of the first thing I disable as well...
I just tryed again with Elite ROM, no changes. I can use shift/tab/del/enter/arrows, but no letters/numers/special characters =(
Just spoke to Support, they know about the issue, it has been escalated but there is no fix at this time nor is there a timeframe for an update.
Just wait till more people get there hands on FUZEs from AT&T, then they will blow their FUSEs!
So right now the best thing I can think of is to enable the onscreen keyboard (OSK.EXE) in windows and place a shortcut on ur quick lauch. What a shame... that we have this nice slideout keyboard and no use for it!
I feel bad for the people who pay for logmein pro, although I am sure they have more influence than I do as a free user.
ricrellim said:
I feel bad for the people who pay for logmein pro, although I am sure they have more influence than I do as a free user.
Click to expand...
Click to collapse
That would me me... Unfortunately, I don't think I influenced anyone during that call. Not to say that 200 - 300 support tickets for the same issue wouldn't either. IMO I think anyone having problems with the TP keyboard and logmein should report it to Logmein whether they pay or not, it might get them to move on it a bit faster.
https://secure.logmein.com/products/pro/supportcs.asp
I just submitted this just now...
Hello, I am currently unable to use the built-in keyboard of my new phone in Windows Mobile 6.1.
My phone is a HTC Touch Pro also known as the ATT Fuze, I and other user of the same phone all have the same issue.
I am told it`s a known Issue, can I expect a patch/workaround or a newer CAB to address this issue?
Thanks
Nicolas
Click to expand...
Click to collapse
You might try the software found in this post:
http://www.forum.xda-developers.com/showpost.php?p=2791652&postcount=36
It changes the weird raphael IME to a default one. Works for me in PocketGBA and even DOSBox and TomTom.
If it works, maybe you encourage the author to open a thread especially for this software as I searched quite a while to find a workin solution for the strange keyboard behaviour.
This is a cab that i used to ALWAYS use on my Kaiser to speed up the keyboard response of the device. Just tried it on my Fuze running ROMEOS and it definitely showed signs of improvement.
Install the CAB and soft-reset. Post your findings to this thread.
Makes this change:
Code:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
Hi, I've tried this registry hack on TouchHD with production firmware, and it certainly does disable XT9 and re-enable the native WM predictive text, *BUT* it makes my TouchHD slow to a crawl. The phone still works but extremely slow (like 2-3 second reponse delay) and also gets extremely hot behind the CPU. It's as though there is still some process in the background desperately making unanswered function calls to XT9. I've had to re-enable XT9 just to make my TouchHD responsive.
Can anyone point me to a CPU/process tool so I could see what it is taking up all those CPU cycles and generating all that heat when XT9 is disabled?
You tried that hack on the Touch HD? Does that even have a hardware keyboard? I don't think that it was supposed to work with that phone. (Maybe?)
yeah.. this would have no effect on sip inputs...
Well there is one problem i got is that when i install this tweak i cant type æøå on the hw keyboard:/ (norwegian keyboard) so is there away to use this tweak with norwegian keyboard support?
Still searching as well
I am also still searching for a way to get rid of the whole friggin' black et9 input bar, but keep my hardware keyboard to be responsive to the sym key, and the function key for typing euro sign and pound sign.
I hate the black input bar, especially since after you type first name in a text message address bar, and press space for a second name, it fills ion a name that's highlighted at the moment.
That's just so annoying...
Anyone any clue on how to deactivate et9, but keep the hardware keyboard fully functional?
Is it working for Raphael??
chetstriker said:
Is it working for Raphael??
Click to expand...
Click to collapse
it is posted in the Raphael Software section. do you now think it's working?
I think it wirked.
I have jsut installed it on my kaiser and it seems to work very well, But i am also old school and running solace v1, works great thank you! no more.. t hanky ou...lol
just pade the registry change...
seems to be working well... barely any lag at all...
i've made this change VVV as well in hopes to fix this problem... it also helped a little
Code:
HKEY_CURRENT_USER\ControlPanel\Keybd
“InitialDelay”=dword: dec 775
“RepeatRate”=dword: dec 23
with this one tho seems a lot better.
After i uninstalled this "disable xT9" my manilla sms meny dissapeared... Anyone knows how to restore it?
this actually got my sip full qwerty keyboard stuck in number mode...
i just changed it back to et9ime.dll and it's back to normal...
too bad... seemed to work well for the hard keyboard.
Works well for me on my HTC Touch Pro.
Thanks heaps ... it's been bugging me for a while.
are u able to uninstall this if dont like?
are u able to uninstall this?
frankjr927 said:
are u able to uninstall this?
Click to expand...
Click to collapse
When I uninstalled this my sms meny in manilla disapeared :S
Works great for me, I've been looking for something like this! Thank you very much!
just a lil warning...
Be careful installing this on touch pros/fuzes. It has been known to get the on screen keyboard stuck on numeric mode. Some ppl have gone upto a week or two without the problem showing up. Just a heads up.
just a lil warning...
Unfortunatley, I did not read this post prior to installing the xt9 disable software on my Fuze. I really enjoyed everything, such as the older style auto correct, and the list of suggested words. Now that juicy "Full QWERTY" is stuck in number mode. Is there a fix for this? Any help will be much appreciated.
Cheers,
Rick
I did the reg change to get the win mob predictive text... which worked until I did a soft reset. After that, my FULL QWERTY is also stuck in number mode.
Changed the reg back to original, and I got back my FULL QWERTY. No need to soft reset.
this helped me! HTC messaging with hardware keyboard on xperia is much faster now... but not windows messaging...
but I found this, which helped out with that too...
http://forum.xda-developers.com/showthread.php?p=4195099#post4195099
great!
XIP 31193
SYS 31193
hello im working on new version and now it is stable and working
here is link
all buttons working (red button .......)
http://www.sendspace.com/file/8ger2y
and here is video of rom
http://www.youtube.com/watch?v=ozY9aKAMy58
scroll down for screenshots
My observations:
+ damn fast
- red/power button doesn't wors as power-down button and phone toggle
- no wireless/comm manager
- some bitmaps doesn't look very well (not a big problem)
- strange names in Buttons settings
- no palm messaging (but maybe it's jus me)
At the moment I'm going back to 6.1 with palm oems, but I do really cross fingers for you and your rom. If you'll put new version soon, I'm getting it! Great work!
miloszz said:
My observations:
+ damn fast
- red/power button doesn't wors as power-down button and phone toggle
- no wireless/comm manager
- some bitmaps doesn't look very well (not a big problem)
- strange names in Buttons settings
- no palm messaging (but maybe it's jus me)
At the moment I'm going back to 6.1 with palm oems, but I do really cross fingers for you and your rom. If you'll put new version soon, I'm getting it! Great work!
Click to expand...
Click to collapse
thx to u next version will be faster then this (i belive)
i need port original applications form palm wm5 to more usable on this palm
1-2 days for it
i dont like palm messaging
original is better for me
I used default messaging for a long time (so called "lite" version of 6.1)
The biggest problem for me is comm manager and power button. Accidentialy I flashed again to your rom so I'll stick with this one now, try to configure it for my needs (it's just question of few apps to cure most of "problems").
Can't wait to see next version.
Best regards.
veisen said:
thx to u next version will be faster then this (i belive)
i need port original applications form palm wm5 to more usable on this palm
1-2 days for it
i dont like palm messaging
original is better for me
Click to expand...
Click to collapse
I would suggest using the Palm WM6 as a base for those apps, not wm5.
Merlyn_3D said:
I would suggest using the Palm WM6 as a base for those apps, not wm5.
Click to expand...
Click to collapse
5 is better because vodafone version is bigger and slower
miloszz said:
I used default messaging for a long time (so called "lite" version of 6.1)
The biggest problem for me is comm manager and power button. Accidentialy I flashed again to your rom so I'll stick with this one now, try to configure it for my needs (it's just question of few apps to cure most of "problems").
Can't wait to see next version.
Best regards.
Click to expand...
Click to collapse
uploaded version wm6.5 with palm oem programs and commmanager and some small fixes
veisen said:
uploaded version wm6.5 with palm oem programs and commmanager and some small fixes
Click to expand...
Click to collapse
haven't tried the clean version, but on the new palm version, the soft menu is the old version and links like phone settings or today settings dont work. *have to use start menu*
also not able to connect to an exchange server. link to set it up in activesync seems to be dead.
red button, and wireless manager seem to work.
will check out the clean version as well.
edit: reset the phone. activesync, email, and exchange all work.
soft key bar still isn't like your first update *i assume it changed in 6.5, and this is the old version* and phone and today settings links in soft menu are still broken.
edit#2: seems the email account isn't listed in the accounts settings window. also at least one keyboard shortcut didn't work (whitebutton + P for brightness settings) i assume this has to do with the "weird" names programs have listed under buttons.
i want to update to 6.5 but is it possible to go back to orignal at&t oem rom afterward to will there be some problem....???????
help......??????????????
hartleyshc said:
haven't tried the clean version, but on the new palm version, the soft menu is the old version and links like phone settings or today settings dont work. *have to use start menu*
also not able to connect to an exchange server. link to set it up in activesync seems to be dead.
red button, and wireless manager seem to work.
will check out the clean version as well.
edit: reset the phone. activesync, email, and exchange all work.
soft key bar still isn't like your first update *i assume it changed in 6.5, and this is the old version* and phone and today settings links in soft menu are still broken.
edit#2: seems the email account isn't listed in the accounts settings window. also at least one keyboard shortcut didn't work (whitebutton + P for brightness settings) i assume this has to do with the "weird" names programs have listed under buttons.
Click to expand...
Click to collapse
thx for test i repair it today
Just downloaded your rom, will let you know the details soon
Ok here is the review of this rom, the one with palm oem applications and commmanager,
Pros:
Fast and stable
Volume is better compare to 6.1
It has inbuilt mass storage driver which 6.1 lack
Shortcut are sorted in appropriate folders in start menu
Black Theme is default, which is very good
Display is better compare to 6.1
There are 2 flavour of Wmplayer
Comm Manager is now full functional
And More............
Cons:
Instead of green light to show the network now its showing orange,
Vibrate is not working
There is slight jerk in display while changing screen from one program to another
There is no Call screen, Mean when you are answering a call or had dialed a call you want be able to see the duration of the call.
Hi there, thank you very much for your great work. I have a quick question: My Treo has a German (QWERTZ) keyboard, will it be detected somehow?, or the ROM will asume its a QWERTY keyboard. I don't mind the OS being in English, that would even be better, is there a quick way to patch the ROM to make it work with the QWERTZ keyboard?
Thank you so much in advance.
About in call screen. It's all around ActiveCall and DialLookup plugins. Maybe changing some registry values will fix it (I had similar situations once and editing some registry solved my problems). Tomorrow I'll compare some of my keyes with working wm6.
-If your syncing to an Exchange server, the Manage Folders function does not work to be able to select addition folders.
-blank HTCSETTINGS icon under System.. appears to do nothing
- 2 PHONE apps under Personal settings. Different functions, but named the same
- There is something off with trying to go into Messages from the Today screen. Takes a few clicks to actually make it work. It doesn't do it everytime.
That's all I found for the moment.. obviously WLAN option does nothing on mine
I've noticed one more thing: there's no "white dot" indicating text input with active function key. It's a bit tricky when you try to type password and you don't see what you write...
But in general it works very well. But installing "hidelogo" caused reset loop and I had to hard-reset.
Great work!
EDIT:
Change HKLM/Software/Microsoft/Today/Items/"Dial Lookup"/Type from 4 to 6 <- it will fix active-call-screen-problem Works for me.
i build new version today with all palm applications and battery test show me 14days
it is quickly then last version i upload it soon
it need some small fixes
UPLOADED 1st link
miloszz said:
I've noticed one more thing: there's no "white dot" indicating text input with active function key. It's a bit tricky when you try to type password and you don't see what you write...
But in general it works very well. But installing "hidelogo" caused reset loop and I had to hard-reset.
Great work!
EDIT:
Change HKLM/Software/Microsoft/Today/Items/"Dial Lookup"/Type from 4 to 6 <- it will fix active-call-screen-problem Works for me.
Click to expand...
Click to collapse
white dot not working on 6.5 i must copy some from 6.1 to make it works
czech version
To Veisen:
Will you make the czech WM 6.5 clear version?
Can you describe differencies between clear and palm version and between 6.1 and 6.5 version?
Thanks.
endymion said:
To Veisen:
Will you make the czech WM 6.5 clear version?
Can you describe differencies between clear and palm version and between 6.1 and 6.5 version?
Thanks.
Click to expand...
Click to collapse
clear is without palm applications and wm6.5 is fastest and stable
czech localization on wm6.5 i make soon
i can make other localized roms as deu ita spa pol .........
1st all try this english
i make localization on bug free version of 6.5
It seems that the awesome keyboard app called Swype has been ripped off the Samsung Omnia II and a CAB has been created to install on winmo WVGA devices.
Info on Swype can be found here: http://www.swypeinc.com/
CAB located here: http://www.mediafire.com/file/ungnttnzmwa/Swype.cab
I installed it on my Imagio and let's just say that I am NOT going back to the regular keyboard anytime soon!!!!!
Enjoy and let me know if anyone finds any issues. I've only used it for about 10 minutes and haven't found anything thus far.
Looks pretty interesting I will have to give it a try later.
That does look pretty freakin' cool.
Just installed it on my Imagio...
WOW loving it thus far...
Top notch works great!
this is really awesome. very impressed with the accuracy so far.
can we make it so the keys pop up like the oem keyboard?
Thanks so much for sharing, this is awesome!
WM noob here -- installed fine but no change. What do i need to do to enable?
had same problem
Did you do a soft-reset?
enabling
No soft reset required. At the bottom of the screen, there's usually that keyboard icon. Just to the right of it is a small arrow. Using the stylus helps for those of is big fingered folks.
Click that arrow and up will pop a menu. Select "Other Input Methods" and then select Swype.
You won't need to do that again, unless you do a soft-reset of the phone at any time.
Ahhh there it is; thx buddy.
Former BB users have stylus "lapses" from time to time....
No problemo.....
us newbies have to stick together.
Best Keyboard I have ever used!
Awesome working great easy to use
I have the vzw tp2. this thread should be in something else since it works on other devices.
also why won't the keyboard stay on swype when you turn off the phone?
thanks its working perfect
Might just be the best app for WM yet!
I was skeptical . . . but now I am hooked! It takes a bit of getting used to, but it REALLY does make typing on a soft-keyboard easy. I don't need no STINKING slideout keyboard!
You can use SIPChange to make Swype be the default keyboard when you do a power off/power on.
This keyboard is ****ing psychic
rjygraham said:
You can use SIPChange to make Swype be the default keyboard when you do a power off/power on.
Click to expand...
Click to collapse
i also had the default keyboard problem and used SIPChange...
"Apparently this is a bug with WM 6.5. Use the cab SIPChanger to set swype as the default keyboard, this setting will even survive a soft reset ( thank god )
Make sure to set the startup delay thingy to 40 seconds or the program will crash on startup." (quote from Survivalism over at PPC).
He also posted the SIPChange cab on his thread...
http://forum.ppcgeeks.com/showthread.php?t=100973&page=3
I thanked him there and thank everyone here for all the help.