Database Develop

how to to repartition the rom

Hi,
I'm trying to upgrade my radio rom. At first everything seems fine but after the upgrade process is at about 30%, I get error no. 114. I think that maybe a part of my rom is broken, so I'd like to change the allocation of my roms. I'd like to have the extented rom part as new radio rom and vice versa.
Is that possible? If yes, how is it done?
thx for your help
PECK

sorry to disappoint you, but no, that is not possible.
start the other way around, do not try to bypass a problem by creating a new one, try solving the problem first. why would the radio rom abort in the middle of the upgrade process?
- do you use the right upgrade tools?
- do you use the right radio rom?
- did you take care of everything else there is about upgrading a rom (bootloader, active sync kill...)?
- are you able to flash another os rom?
...whatever comes to mind when flashing roms, because this problem will not be any different after all.

@ chef_tony:
I've no problem with upgrading the OS or the extented rom! thats why i think that maybe the flash chip is broken!
I tried many different upgrading tools, even one of yours!
I don't know the current language id of my device! Originally it was a german XDA III! How can I check the current language id and how can I change it? is it possible that I have this problem because of a wrong language id?
thx in advance
PECK

i would guess it couldn't have anything to do with the country id, error 114 is radio rom update error.
btw, you get to see the inofficial country id everytime you soft reset the device, and in the bottom right corner it says something like WWE, or GER, for instance. or, when you connect the device and run getdevicedata.exe from the ruu folder, which is done before the upgrade, to show you the "from:" and "to:" numbers.
but: i just got another idea.
do you actually take out the sim card, before trying to upgrade the radio?
is your device sim unlocked?
have you played around with different bluetooth stacks?
have you performed a hard reset before trying to upgrade the radio?
have you tried upgrading the radio from the stock o2 rom wm2003?
ok, that was more than one idea, and downgrading seems like a lot of work, but it is worth a shot. if you spend days flashing (or trying to) over and over again anyways, you might as well try that, would mean 2 extra upgrading sessions, but what is that, like an hour?
oh, and what radio rom does the device have now, stock? or is it a newer one already?
and why do you think you need to upgrade the radio rom anyways? phone not working, maybe the problems lie deeper and that could be why the upgrade process can't work in the first place!
"don't confuse an original symptom with the sickness from the drugs we gave him" as dr. house, would say

hi,
the device is unlocked! there was no sim card inserted during the upgrade; i just tryed with one but I get the same error at 32% progress...
it doesn't work with the original rom, also!
it would be fine if the stock rom was installed, but unfortunately i don't have installed any radio rom whatsoever!
windows mobile device information says that i don't have a radio rom and no protocol installed!

oh, for pete's sake, i'm sorry.
when i asked you about the sim card being inserted, i thought of taking the card out, if you hadn't done before, should have written that. many people have problems when having a sim card or sd card inserted, i didn't want to suggest to put one in! that can never do good, either nothing happens or it gets worse, i really shouldn't have forgotten that.
it doesn't work with the original rom, also!
Click to expand...
Click to collapse
yeah, but does the stock rom itself work? i mean, the stock rom is a so called baked rom, meaning it contains a rom, an extrom and a radio rom, while the cooked roms here only contain the actual rom, so the os. i mean, you could try and extract the radio from the stock rom and try and flash that. it would give you a radio back! or if that doesn't work either, try flashing the entire stock rom, if that works without problems and then you'd have a radio, it means that your issue is too strange to think about, but still you can delete the extrom again and flash another rom without harming the original radio.
wouldn't that be a step forward?
btw. what radio rom are you trying to flash?
if it is just one, you try over and over, are you absolutely certain, this is for the BA? which version is it? what was the original file name of the exe? where did you get it? have you tried re-downloading it, maybe the file is really broken!

hi,
i tryed many different rom versions, and i'm pretty sure they are for the blueangel!
do you know, where i can get a cooked rom for my xda 3?

first, to be clear about that, as mentioned before, cooked roms consist only of the operating system itself and contain neither a radio rom nor an extrom. so about every rom offered here is a cooked rom. but that won't solve your problem, since, as mentioned, there is no radio included. that is why i suggested for you to try the original radio from the shipped rom, and then the entire shipped rom, to determine, whether the radio rom flashes, when it comes after an nk.nbf rom, which would mean, that from now on, you'd have to "bake" roms yourself, by taking cooked roms and adding the radio, so to not lose it. when you can actually flash wm2003 you can also try flashing other radios with the original BAupgradeut, because in contrast to os roms, there should be no limitations to the radio roms, as far as i know.

Change WM german to english or spanish
Hi! I´m new in the forum, please i need some help, i have a qtek 9090 bought in germany so it has a windows mobile in German. Can you help me to change the ROM to an english or spanish version.
The info is:
ROM version: 1.40.01 GER
ROM datum:03/10/05
Radio version: 1.12.00
Protocol version 1337.42
Extended ROM version: 1.40.750 GER
Model: PH20B
Platform: PocketPC
IMEI 353030001525302
Can you explain me step by step or suggest me a page wuere i could find some instructions, i have another problem too, I don´t have a usb cable for it, please help me

SE Updater failed to install new rom, what is the best thing to do now?

Hello,
I know you guys got some excellent walkthroughs, roms, programs and threads where you've helped a lot of people out but I could really use some personal feedback. I had hoped to fix my phone using one of the excisting threads but unfortunalty I can't get it to work with those.
My problem is one I've seen more of in here, I used the SE updater and it froze at 53%, I did what the program said, reconnected and it froze again at 12%, and again, again, etc. So I disconnected thinking it might be a bad USB port. But then the updater didn't recognise my phone at all. So I used the mtty program suggested in some of the threads and I got past the red/green/blue screen but now it's stuck at the Sony Ericson logo, as if WM6.1 is gone.
This is what the red/green/blue screen currently states:
KOV110
SPL-0.78.0000
MicroP1-787
MicroP2-707
From what I gather this means I can't flash roms, right? I tried making it a hard-spl but when I use the tool it says it can't connect.
So is there anyway to get a rom on it and bring it back to life?
Thanks inadvance!

Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards

meska said:
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
Click to expand...
Click to collapse
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.

Ronnet said:
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Click to expand...
Click to collapse
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.

original roms will still work with original spl... but nevermind =P

laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
My phone can still power on in the sense that it shows the Sony Ericson logo or that I can access the three collor screen. But it won't launch WM6.1. I also have a problem with updating to hard DSL. It does recognise my phone because without it connected the program finds nothing and with the phone connected it wants to start updating. It says ''updating from image version: (emply) to image version: 1.00.X1 Ipress next and it opens a progress bar on both my X1 and the PC. But it never goes beyond 0% and then gives me an connection error. I think it has something to do with not being able to get passed the Sony Ericson logo. I mean the hard-DSL program does recognise my mobile but activeSync is never active because my PC doesn't recognise a WinMobile phone (since it wont go past the Sony Ericson screen)

meska said:
original roms will still work with original spl... but nevermind =P
Click to expand...
Click to collapse
Really? That might fix my device then. Could you suggest a rom from the long list? Perhaps one that works on all versions? Because I'm dutch but my mobile has always been in english so I'm not sure what rom version I had. Except that it was identified as an R2 Rom by the Sony updater before it killed my X1...

Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that

Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
I'm now downloading the initial dutch R1 firmwire, could that one work?

Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
Alright so I got an R1 original rom (I now realize that the R3's were originals aswell) and it worked! I'm not sure if it was the different rom or the formatting with FAT32 that did but it works again. So I'd like to thank everyone who was kind enough to reply.
The device is incredibly slow now but now I can use the hard-DSL installer, right? DOes anyone have a suggestion for a good rom to use?

laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
DON'T hard-spl if you're going to flash a stock ROM. And especially if you're going to use SEUS.
Try flashing the R3A first. The R1s are way slow, as you've seen.

I think to i dead my blueangel Qtek 9090

Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(

now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...

ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony

thanks now everythink is write ..

now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.

for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question

tony i need your help

[Q] Cannot flash ROM anymore. Can you Help?

Hi guys,
I have a weird problem.
As of recently two days ago, my tilt won't take any flashes anymore. I believe with was caused by an action of mine which I tried flashing android from SD to NAND.
Here are the symptoms:
1) After a failed attempt at loading the Android Kernel, I installed the stock HTC ROM (Kaiser_HTC_ASIA_HK_WWE_3.34.721.2)
2) The stock rom flash worked, but any subsequent flash do not work
3) When trying to flash (either from Active Sync or SD Card) it gets stuck at 0%
Current state is as follows:
1) Phone boots up normally with stock rom
2) I can get into Bootloader mode no problem
3) When trying to flash it doesn't work
I have tried several steps in order to recover.
1) Tried to flash Stock rom again (Faillure)
2) Tried to flash HardSPL again (Faillure)
3) Tried MTTY 1.42 (Don't know if Success or Faillure) - I have attached the screenshot below
I have been successful in flashing multiple custom ROMs before, but idiot me wanted to try the android and now I messed my phone up. I guess it's true what they say: "If it ain't broke, don't fix it!"
Anyways...
So it seems to me, the connection is getting done but nothing wants to be pushed.
Here are my credentials:
PC:
XP Service Pack 2
Phone:
ROM Version: 3.34.721.2WWE
ROM Date: 09/30/08
Radio Version: 1.70.19.09
Protocol Version: 25.83.40.02H
HardSPL 3.34
So my question is, do you guys know how to get my Kaiser working again?
Do you recommend in attempting Android on Kaiser again or leave it be?
Any help is greatly appreciated in clarifying this out.
Dave.

Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?

tsiftis21 said:
Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?
Click to expand...
Click to collapse
You can just dont put http or wrap it in code and it's due to limitation on accounts to prohibit spam untill you reach a ceratain ammount of posts.

Screenshots
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]

tsiftis21 said:
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]
Click to expand...
Click to collapse
remember to take out your sim and sd card while flashing.

Mr. Clown said:
remember to take out your sim and sd card while flashing.
Click to expand...
Click to collapse
I had tried without the sd card, but I had forgotten to take out the sim card.
I tried without the SIM card and the same result is present. Won't go past 0%.
Any other ideas?

Does any one have any ideas how I can get my tilt up and running again? Any help would be greatly appreciated.
Thank you

I get the same issue...
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.

tstaddon said:
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.
Click to expand...
Click to collapse
I had this on my tp.
My usb was dying out, i ended up switching my tp with the one of my brother cuz my brother got a galaxy S.
Try if active sync works properly and keeps connected for 15 mins or more.
My connection kept getting lost untill eventually no pc would be able to reconize my phone.

Problem with HTC Kaiser Tytn II - please help...

So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...

To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.

hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.

Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!

Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel

hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.

Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.

Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel

cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?

-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...