I've have two different issues with Outlook mobile on my Tilt. I hope you guys can provide me with hints and workarounds.
Problem 1:
Outlook Mobile will not download Internet pictures. I don't want to keep telling Outlook to "Download Internet Pictures" because they were blocked. -Is there a way to permanently allow all pictures to download, so I don't have to click [2x] (i.e. Internet Pictures Blocked, Download Internet Pictures)?
Problem 2:
None of my html links are working. I keep getting an OperaLaunch.exe error "The file 'OperaLaunch' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.' Subsequently I am unable to click on any links whether they are embedded within a picture or textual.
There must be some tweaks for this, perhaps a reg edit or something... please help
THANKS!
Opera 8.65
Hi,
Answer to question 2: Opera 8.65 gets around this problem, i was getting the same message, upgraded to 8.65 and that sorted it.
RavenY2K3 said:
Hi,
Answer to question 2: Opera 8.65 gets around this problem, i was getting the same message, upgraded to 8.65 and that sorted it.
Click to expand...
Click to collapse
Raven,I appreciate the input but unfortunately that doesn't solve my problem. I have Opera 8.65 and been using it for a while to no avail with respect to this issue. [responding from my Tilt in Opera Mobile]-prealphageek
I was getting that same error and to fix it I searched the registry for operalaunch and changed it to opera.exe
Sorry I don't have the exact key that needs to be changed but that's how to fix it.
itguy said:
I was getting that same error and to fix it I searched the registry for operalaunch and changed it to opera.exe
Sorry I don't have the exact key that needs to be changed but that's how to fix it.
Click to expand...
Click to collapse
There are 14 different keys using operalaunch.exe keys; Do I change all of them? This still doesn't answer problem 1.
that happens when you install opera on the storagee card....
install it to your memory, or copy the opera launch to the windows folder
the_ape said:
that happens when you install opera on the storagee card....
install it to your memory, or copy the opera launch to the windows folder
Click to expand...
Click to collapse
It's funny, as I was reading your post, it sounded like really logical thinking and you know it was. It works! THANKS the_ape!!!
Now how to get Outlook Mobile to automatically download all html pictures...
thanks again!!!
prealphageek
can anyone help with the html download?
Just getting this back on the radar. I'd like to get Pocket Outlook to automatically download images without me having to manually do it for every email. i.e. html emails...
That question has been asked many, many times and as far as I know, it has yet to be answered.
I think every newbie that comes here asks that question...
Chuck Pocket Outlook AND Flexmail.
Install ProfiMail from lonelycatgames.com - onto the storage card. It is great at HTML email! I think it is a much more efficient email app for a small screen. It also eliminates that frustrating BS of selecting the messages you want to download, then downloading them in a separate step.
dgduris said:
Chuck Pocket Outlook AND Flexmail.
Install ProfiMail from lonelycatgames.com - onto the storage card. It is great at HTML email! I think it is a much more efficient email app for a small screen. It also eliminates that frustrating BS of selecting the messages you want to download, then downloading them in a separate step.
Click to expand...
Click to collapse
Thanks for the tip.. I tried it out.. not exactly my cup of tea. It seemed a little clunky for me, plus I like using touchflo while reading mail. I can live with pocket outlook until there is a better fix. I prefer a real fix rather than a installing (masking the problem) new software to replace existing tools. that's just my 2 cents.
Related
Using the Tilt's Internet Explorer, I can not access a particular website. The problem is that the developer of the website has a script to detect the browser and if it is not IE 6+ or above, you only get an error stating that you need to use IE and not Opera, Firefox, etc... But the Tilt is running IE, correct?
Anyway, is there a better version of IE that can be used on the Tilt? I have Opera installed and use that mainly but as I said, the site blocks Opera as well.
Help?
grizzley said:
The problem is that the developer of the website has a script to detect the browser and if it is not IE 6+ or above, you only get an error stating that you need to use IE and not Opera, Firefox, etc...
Click to expand...
Click to collapse
Send a nasty email to the developer telling him he's a f*cking idiot and it's people like him that break the internet.
Try PIEPlus by Reensoft,
It Adds Many Much Needed Improvements To PIE.
It Also Allows You To Change The User-Agent That The Browser Reports To The Server. (Essentialy Identifying Itself As IE6 For Example)
Regards,
OllieD
OllieD said:
Try PIEPlus by Reensoft,
It Adds Many Much Needed Improvements To PIE.
It Also Allows You To Change The User-Agent That The Browser Reports To The Server. (Essentialy Identifying Itself As IE6 For Example)
Regards,
OllieD
Click to expand...
Click to collapse
I second that on PIEPlus. It is a must have if you plan on using PIE.
PIE Plus is pretty cool! I like it.
Unfortunately, it dosent seem to fix the problem. I changed the User Agent to:
Mozilla/4.0
compatible
MSIE 7.0
Windows NT 6.0
PPC; 240x320
Did I miss something or do I need to keep on digging for a solutions?
The Picsel browser also allows you to define the User Agent string to IE6 etc.
It is a nice browser, but not as nice as OperaMini IMHO, but it will also view *.pdf *.doc files and text and images. There are cabs for it floating around here somewhere.
Thanks everyone. I found a browser.
Picsel (wizzzard!!!) works great! WOW, super fast also with easy to use navigation.
Thanks everyone!
this may sounds dumb, what does the P stand for in PIE? PDA?
jallenclark said:
this may sounds dumb, what does the P stand for in PIE? PDA?
Click to expand...
Click to collapse
Pocket
Mike
The P Stands For Pocket.
Sorry To Hear That PIEPlus Does Not Solve Your Issue.
Might Have To Take A Lookie At Picsel.
Try Jataayu browser, Here http://forum.xda-developers.com/showthread.php?t=335625
OK, tried Jataayu as well. Pretty nice. Tried it for about 2 minutes and every page that has a login screen, after entering my user/pass it wont let me click the "Login" button. Tried it on 3 different web pages and the same result each time.
Still looking for an alternative though.
I am almost done with the Tilt. I am giving it 1 more week and then it is going back to ATT.
Hi Team,
Opera mini 4 has made my mobile surfing heaven. Good bye PIE! Thank god.
However. I have two queries.
1. Anyone know how to get shot of the annoying "Allo Net Access" Prompt every time i run the midlet? In my Java prog under security I only get "Ask" and "Never Allow". Need an "Always Allow" option, but it's just not there.
2. How the hell do i directly link to a java program, without having to first boot up java, then choose the app? I know this will be possible, but haven't fathomed it yet. I'm wanting to stuff the link under the internet button so I can be rid of PIE for ever.
Any advice greatly appreciated.
Many thanks,
Matt
OM4 is a java midlet - you must access it through Java. You can make shortcut on Today screen.
As to the "allowing network access", after you have opened program, go to Bookmarks and then Opera Mini - you will find options there. But basically, you will always have to check allow access to network.
Both can be done.
http://pdaphonehome.com/forums/ppc-...ed-includes-info-new-java-midlet-manager.html
EDIT: I attached the files discussed in case you don't want to register.
Yes, both can be done. Here are the simplest instructions I put together a while back.
http://howardforums.com/showthread.php?t=1270419
And yes, grab the fix.zip in the last post above and you can skip step 1 in my instructions in the linked thread...
The issue with the direct link works fine. But I have already tried to modifiy the selector.utf in both ways, by the fix and by using an hex editor.
But I still get this damn access questions.
I use a TyTNII with shipped HTC Rom with Opera Mini 4 final installed.
The description in your posted link is for OM beta2. May it be that modifications
are not suitable anymore for version 4 final?
A solution would be great.
Hans Olo
Edit: Ok, seen in the link of the last post from jomo25 that the version of jbed is the cause. Thanx for the info.
Icon
This is all perrrrfect. Is there a way to change the Icon?
if you want to make a shortcut to launch Opera Mini directly:
Use a Notepad on your PC to create simple text file. And it should only contain the following text:
28#"\windows\jbed.exe" -run s1_
BUT you may need to edit it and replace the S1_ with something else. if this is the only Java app you have installed and used, then most likely you want to use S0_ in place of S1_.
Name it Opera.lnk (or whatever you want it to say).
And then copy it to your "\Windows\Start Menu\Programs" folder.
Click to expand...
Click to collapse
I can launch Opera Mini in Esmertec Jbed with no problem.
I can see the Opera Mini with the same logo as Esmertec Jbed in Programs (I change the name to Opera Mini.lnk),
but I just can't launch Opera Mini by tapping it.
I tried both s0_ and s1_ but get the same result, it says:
Could not find suite s1_
Click to expand...
Click to collapse
or
Could not find suite s0_
Click to expand...
Click to collapse
It might be s2, s3 or more - the s# changes based on how many other java apps you previously installed. Even if you had one and deleted it, it still counts as one. So try some more numbers.
Also Hans- make sure you are using JBED and it should work.
xTyTN said:
I can launch Opera Mini in Esmertec Jbed with no problem.
I can see the Opera Mini with the same logo as Esmertec Jbed in Programs (I change the name to Opera Mini.lnk),
but I just can't launch Opera Mini by tapping it.
I tried both s0_ and s1_ but get the same result, it says:
or
Click to expand...
Click to collapse
I had that same problem yesterday. I tried putting the s1_ in double quotes.
28#"\windows\jbed.exe" -run "s1_"
Once I did that it finally worked for me.
enigmaneo said:
I had that same problem yesterday. I tried putting the s1_ in double quotes.
28#"\windows\jbed.exe" -run "s1_"
Once I did that it finally worked for me.
Click to expand...
Click to collapse
Thanks enigmaneo, it works for me, too
Also make sure you ALWAYS check out the Wiki - I've explained all these questions in my Opera Mini- and MIDlet-related tutorials & articles (see for example http://wiki.xda-developers.com/index.php?pagename=The (Java) MIDlet Bible and http://wiki.xda-developers.com/inde...n use Opera Mini as the system-level browser! - make sure you follow the links from the latter)
Thanks for this info... took me to "s7" until it worked. Thought I was doing something wrong...
UPDATE (11/30/2007): The link association problem has been fixed for WM6 in the meantime (see my last article on the association). This means you can already have the system invoke Opera Mini when you click a link in an e-mail / in any document.
Note that there are still newer and newer versions and optimizations (even faster and faster versions of the invoker script to minimize waiting for Opera Mini to be invoked) published in the Comments section of my related blog post; that is, make sure you also follow it.
And, again, now that you can easily invoke it from any other application (including the most important Messaging) by just clicking any link, Opera Mini HAS become a REAL alternative to all the other, mostly commercial alternatives on Windows Mobile. Make sure you give Opera Mini a try: you may fall in love with it. It’s really powerful. It’s plain great –(most of the times) much faster and cleaner than anything else.
Menneisyys said:
And, again, now that you can easily invoke it from any other application (including the most important Messaging) by just clicking any link, Opera Mini HAS become a REAL alternative to all the other, mostly commercial alternatives on Windows Mobile. Make sure you give Opera Mini a try: you may fall in love with it. It’s really powerful. It’s plain great –(most of the times) much faster and cleaner than anything else.
Click to expand...
Click to collapse
I couldn't agree more. This little fix with turning off the notification to accept the session has made it a lot more usable to me. The browser is awesome and while it can be slow sometimes due to formatting the page, etc., I wouldn't use anything else. PIE simply falls flat in comparison.
I just really dig the screen scrolling with my fingernail (screen protector on there of course).
I did managed to get the shortcut to work but for some reason i just can't get the notification removed. I've downloaded the fix, patched the "Selector" file, replaced it in the phone but it still won't work & yes i did download the JBED from the link given...still no luck. Anything i may have missed out?
Scann69 said:
I did managed to get the shortcut to work but for some reason i just can't get the notification removed. I've downloaded the fix, patched the "Selector" file, replaced it in the phone but it still won't work & yes i did download the JBED from the link given...still no luck. Anything i may have missed out?
Click to expand...
Click to collapse
You, then, can just use the hack described at http://forum.xda-developers.com/showpost.php?p=1666254&postcount=6 - it'll work. Also make sure you read the entire thread.
I don't know what I am doing wrong. I even copied the text from the post and I have gone through 0-8. When I tap the opera icon it opens the text file. I have even tried it with and without the extra quotation marks.
What am I doing wrong?
drcompton said:
I don't know what I am doing wrong. I even copied the text from the post and I have gone through 0-8. When I tap the opera icon it opens the text file. I have even tried it with and without the extra quotation marks.
What am I doing wrong?
Click to expand...
Click to collapse
Did you also try the hacked JAR file I linked to? It WILL work if you deploy it locally and manually set the Blanket model.
Jar file
Can you post the link? I can't seem to find it
drcompton said:
Can you post the link? I can't seem to find it
Click to expand...
Click to collapse
http://www.winmobiletech.com/sekalaiset/opera-mini-4.0.9751-advanced-int-SIGNED.jar
I am having a problem with logmein from my phone.
a bit of a background.
I'm loggin into a Windows XP machine.
I have the logmein free account.
I can use a PC and it logs me in just fine.
It works on my account from my friends Sprint Mogul PPC just fine with WM6 and ractre cab
No matter what ROM on my Kaiser, it gets the same error
No matter what browser I use on my Kaiser, it gets the same error.
The problem. I have the cab installed already that I DLd from logmein.com. I go to logmein.com and type in my login info/pass. I click "logmein".
about 1 in (5-50) times it will then take me to the screen where I can select my computer. The other 4-49 times, it takes me back to the login screen where you enter your login info. There arent any error messages or anything. I then click "back" in PIE and hit the submit button again. repeat this a ton of times until it logs me in.
The next screen is where you select your computer. The same thing happens here, and it will bring me to the login screen. Click back and submit again and million times and eventually it will work.
Once I get to the screen where you can click "Remote control" this works fine.
I've asked on logmeins forums and no responses. I emailed their tech support and no responses.
I dont know what to do at this point except move to different software.
any ideas?
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
grizzley said:
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
Click to expand...
Click to collapse
Yes. and I assume you read the part where i've already installed that?
it works for me after....
running the disable cingular proxy cab.
I used to get the exact issue you have on my Tilt. Here's what I've found to work.
Run the disable Cingular Proxy cab (search around, its everywhere in these forums) PRIOR to entering your username/pass.
If i have done this, it will go the 1st and every time to the my computers list and then i can RC from there.
If i forget to run it and i hit "the loop", you can leave IE running and run the cab from a file explorer, then switch back to IE and try again.
Annoying, i know...this coupled with the need to use IE rather than Opera Mini are definite cons to using Logmein on WinMo, but I still need to almost everyday.
Let me know if you can't get this solution to work for you.
I tried that and it didnt work.
Downloaded disable cingular proxy cab.
rebooted.
ran disable cing proxy cab
ran PIE
went to logmein.com
logged in (that part went fine)
clicked on computer.
it took me to login page.
rebooted
ran pie
ran disable cing proxy cab
went to logmein
tried loggin in.
looped =/
Nobody has a good answer for this that I have been able to find. You can try loggin in on LogMeIn's PDA site, https://secure.logmein.com/pda That stopped the endless log in loop problem for me, and I can get to my computer groups. However, I can't remotely control anything. I click the computer I want, enter the password, and it brings up a screen with whatever options that computer has (just Remote Control for LogMeIn Free, Remote Control and File Manager for LogMeIn Pro.) You click Remote Control, and it doesn't do anything, just brings you right back to the same screen. File Manger DOES work on the computer I have LogMeIn Pro on, but I really need the Remote Control. It is maddening, nobody at LogMeIn or any other phone forums seems to know why this is happening. I never had the proxy setup to begin with, everybody keeps talking about proxies like that's the problem, but disabling the proxies doesn't solve the problem for a huge number of folks. I've been able to find solutions to all my other Tilt problems with a little diligent googling, but not this one. I'd love an answer myself!
sorry...
sorry guys..
I have tried almost every kaiser rom here, and at least half of the wizard ones when i had that and the logmein has been a thorn in my side as well, except for me the toggle of disable/enable proxies works every time.
I wish you both luck in your searches for a more universal answer to this problem.
the real key is a fully supported solution from logmein...
Are you using PIE Plus or another multi tab browsing utility? The happens to me with PIE Plus, but only if I select Pocket View in the view settings.
i gots it 2 work!
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Okay, I post a question in this thread & what happens????
Now everytime I log into Logmein.com I connect fine but about every five minutes I lose the connection & get an "Invalid IP Address" error. Anyone have this problem? I tried adding my own IP but then I can't connect period. Anyone know a fix?
isimme said:
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Click to expand...
Click to collapse
Followed these exact steps. still loops for me X 1000
I tried installing to device, then my storage card, repeating all steps.
The odd thing is that I downloaded minimozilla (mobile firefox) and it logs in JUST FINE) but of course stops at the point where it would show you the desktop. but has ZERO issues loggin in.
*SIGH*
Anyword on a fix for Mismatched IP Address error?
i dont have anything on the mismatched ip thing.
I did manage to solve my problem on my own.
So anyone else still having this problem:
start|settings|connections|connections|Advanced Tab|Select Networks
In the top drop down, select the tab for the internet that you use (Medianet, etc)
Click edit.
Bottom tab click proxy settings.
Uncheck "this network uses a proxy server to connect to the Internet"
Click ok.
The cab that is supposed to do this didnt work for me. but doing this manually works for me.
Working perfect on Blackstone with the cab downloaded from logmein.com with Internet explorer.Not working in Opera.
My steps:Opened https://secure.logmein.com/pda from IE, logged in to my account,then when i pressed connect logmein forced me download THEIR RACtrice .cab ,installed,restarted IE,and i'm in bussiness.
I just upgraded the ROM and after upgrade, I notice that the few websites (www.wf.com and beta.m.yahoo.com ) which previously used to work with 1.57.502.2 ROM, does not work anymore. When I try the first one, I get "Browser not Supported" and when I try the website I get "HTC Pilgrim not supported". Anybody else has this problem? Any clues? This problem I reported with these 2 websites occurs with both IE and Opera Mobile browsers. First I thought it was limited to IE, but verified Opera as well which has same problem. So, I am sure it has to do with this new ROM upgrade which changed some of the registry settings or device identifier. Anybody any clues ?
There are several ways to fix this problem, the easiest being,
use KaiserTweak that is stickied at the top of this forum, and change PIE User Agent CustomBase to HTC-8900(AT&T Tilt).
Or you can use a registry editor to do the same thing.
I prefer KaiserTweak, it's easier and lots of stuff you can tweak.
Alemaker
KaiserTweak worked for me. For some reason the 1.62 ROM I downloaded had defaulted to the stock TyTn II PIE Agent. I switched it to HTC-8900, soft reset, and bammo, back in business. From what i remember, the old rom was defaulted to HTC-8900 when i opened KaiserTweak the first time.
This problem still continues with Opera Mobile
Great, Thanks!! KaiserTweak help me fix the problem with IE.
But it still same issues visiting these websites from Opera Mobile, any other magic here?
try un-installing and re-installing Opera, and make sure to get rid of all it's folders on your phone before re-installing.
Still not working
I uninstalled Opera, then made sure that I removed all the folders/files it had created, then did a soft reset and then re-installed opera, still no luck. Continue to have issues with these 2 websites. Any other ideas ?
i just recently updated to the 1.62.xxxx rom... i dont have problems with opera though but i got these issues on my fone.. 1st off, when i take a picture, i cannot load the file.. i cant see what i took. it gives me an error saying that the file cannot be opened(this happens when the default storage is the storage card.) also, when i save something to the storage card, i get another error that says, a device attached to the system is not functioning. i already tried doing a hard reset and i still get errors... any clues??? thanks! im thnking of going bck to the old ATT rom... (sorry for any typos.. im using my phone to write this reply... )
i know this might be a stupid question for everyone that knows what their doing but i do have a registry editor but i cant find the place to change the pie agent.....where can i go to change that?
thanks in advance for your help
why not just use kaisertweak or search for the reg key, although i bet its easier to use kaisertweak
im really a noob so i dont know anything about kaiser tweaks but i have task manager that has reg edit on it...so id rather use that then just getting a new program. i hope someone can help me find that location to switch the user agent. but just wondering does changing it really make a major difference???
No HSDPA
With the previous ROM I was able to take advantage of the increased speed of "H" while on the internet after using the Kaiser Tweak. With the new 1.62 ROM my "H" seems to have dissapeared and I only see the 3G even after running the Kaiser Tweak again. Anyone else having this issue? Did our friends AT&T get greedy and lock us out of the high speed?
sunil28 said:
I uninstalled Opera, then made sure that I removed all the folders/files it had created, then did a soft reset and then re-installed opera, still no luck. Continue to have issues with these 2 websites. Any other ideas ?
Click to expand...
Click to collapse
I do not believe it will work with Opera. Opera routes you through a proxy which reformats content for your device. The websites my not recognize this or the device ID may get screwed up. I was trying to visit some music website that only allows visitors from the US, but was told I could not access bc I was browsing from outside the US - bc the Opera server is not located in the US.
Hi all,
I just upgraded my HD from Davideuck_6.5_V-3 to V-4, to solve the problem i had with ActiveSync and Exchange Server. (Error Code 0x80070057)
Still, I get the same error:
After the first sync, code 0x80070057 and no more synchronisation with the server. After I delete the setup or hard reset the device, it works again for one sync.
Could this happen to be a WM 6.5 problem?
Regards, Greg
Maybe you should post this in the thread for Davideuck's rom, instead of starting a new thread?
Google is your friend...
This error code has something to do with a large no. sub-folders (20 or more).
http://www.google.com/search?q=0x80070008
Out of Memory.
Sorry, had the wrong error code (copy-paste), but believe me, I googled it a lot...
does your exchange server use ssl?
rklosinski said:
does your exchange server use ssl?
Click to expand...
Click to collapse
Yes, it does.
Have gone back to a 6.1 Rom. Everything seems to work fine now.
greg2011 said:
Yes, it does.
Have gone back to a 6.1 Rom. Everything seems to work fine now.
Click to expand...
Click to collapse
I have 6.5 and i have the same problem. Deleting and creating again gives one Instance of Sync but then again the error appears from the 2nd time onwards.
i Like the 6.5 - can someone please help me with the error?
to all
salim1001 said:
I have 6.5 and i have the same problem. Deleting and creating again gives one Instance of Sync but then again the error appears from the 2nd time onwards.
i Like the 6.5 - can someone please help me with the error?
Click to expand...
Click to collapse
Hi all,
I posted some comments on this already in the WM6.5 thread of Davide.
I am on his ROM and everything works perfect. I can sync in an sort that is possible.
the errorcode is not unique und has several meanings
I think if it does not work over the air, it is an issu in the connection settings. Can you surf the web using only phon uplink ? If not, delet the proxysettings in the connection string.
If yes it seems you are having an issue with the certificate, this might be related to 6.5 but dont think so really. I have enrolled certificates to my device for WIFI Access and it works too. I can even sync using WiFi.
On last guess: change the local to German, test and change back. Please provide feedback to this last guess
drhoros said:
Hi all,
I posted some comments on this already in the WM6.5 thread of Davide.
I am on his ROM and everything works perfect. I can sync in an sort that is possible.
the errorcode is not unique und has several meanings
I think if it does not work over the air, it is an issu in the connection settings. Can you surf the web using only phon uplink ? If not, delet the proxysettings in the connection string.
If yes it seems you are having an issue with the certificate, this might be related to 6.5 but dont think so really. I have enrolled certificates to my device for WIFI Access and it works too. I can even sync using WiFi.
On last guess: change the local to German, test and change back. Please provide feedback to this last guess
Click to expand...
Click to collapse
Im sorry, but none of your guess helped me to fix the problem . I think, I'll downgrade to davideuck V3
hi,
I think we found a solution. on the 2k3 exchange server we configured only html-messages (not html or plain text). up to now, the second, third sync and the automatic direct push works fine with 2k3. to configure the exchange server:
Exchange System Manager -> „Internet-message-format“.
Attention! this is not the solution for everyone. In a heterogen mailenviroment with MACs und Unix this could produce some problems!
have fun
greg2011 said:
Hi all,
I just upgraded my HD from Davideuck_6.5_V-3 to V-4, to solve the problem i had with ActiveSync and Exchange Server. (Error Code 0x80070057)
Still, I get the same error:
After the first sync, code 0x80070057 and no more synchronisation with the server. After I delete the setup or hard reset the device, it works again for one sync.
Could this happen to be a WM 6.5 problem?
Regards, Greg
Click to expand...
Click to collapse
I have the same issue, i tested the Davideuck_6.5V4 and Miri 6.5 V1 & V3, synchronisation worker on the beginning now I have the same issue, may be link to 6.5 and Activesync4.5...
0x80070057 is related only to emails. if you uncheck email sync in active sync rest works ok.
chalx said:
0x80070057 is related only to emails. if you uncheck email sync in active sync rest works ok.
Click to expand...
Click to collapse
It's right, but it's better with emails...
Someone found a solution?
trappers said:
hi,
I think we found a solution. on the 2k3 exchange server we configured only html-messages (not html or plain text). up to now, the second, third sync and the automatic direct push works fine with 2k3. to configure the exchange server:
Exchange System Manager -> „Internet-message-format“.
Attention! this is not the solution for everyone. In a heterogen mailenviroment with MACs und Unix this could produce some problems!
have fun
Click to expand...
Click to collapse
I give up same problem again....and the message format is plain text again on my mobile. no chance to change.....
dam...back to wm6.1
direct push without mail is nothing
Hi All,
I am not sure if you already have an answer for this but this is what i did which resolved the similar problem for me.
Sounds Easy!!
1 - uncheck all (emails,contacts,calendar etc) from options
2- save the uncheck.
3 - go back and check back again but only your calendar and save it and hit sync. Once this is done, check another one and sync and then another and sync and Hopefully this should resolve the issue for everyone who is getting an error for 0x80070057.
Please Note : check one item and Sync. checking all and syncing would pop up an error again.
Enjoiiiiiiiii