Database Develop

Kaiser - TyTN II - GoodLink ver 5

I have not found any threads regarding this so I went ahead and bit the bullet and tried on my GoodLink server. Initially disappointed because my server was setup to send the last ver 4 GoodLink software to the Kaiser. After upgrading then to ver 5 the phone portion of the device would not work no matter what I did. GoodLink seemed to work but the phone wouldn't. I then uninstalled GoodLink via the remove programs (now GoodLink does not require hard reset to get rid of it).
I waited 24 hours (chicken). I then made sure that ver 5 was pushed to the device initially - viola - seems to work great now after 24 hours. No slowing of the device as was the case with other lesser devices (memory and processor speed!).
So far I believe that for those who want GoodLink and PPC the Kaiser may be the best device so far! I'll keep you updated as to any glitches that come up. I fully recognize that with some of the improvements to Pocket Outlook and with always on active sync GoodLink is not as needed as it was before but there are still some "closer to desktop Outlook" advantages for business users.

jcrompton said:
So far I believe that for those who want GoodLink and PPC the Kaiser may be the best device so far! I'll keep you updated as to any glitches that come up.
Click to expand...
Click to collapse
So - I binned Goodlink some time ago on the Co HP device and opted for a phone the performance was so bad. Based on your recommendation I might try it again. Where can I get the latest CAB? Will my old account registration work on the TyTN - or do I have to go back to the IS dept for another "key" to get setup?
Thx
Graham

The IT dept has to enable the version 5 for your device. In my case I have my own GoodLink server and I tried to install via a cab file and it didn't work for some reason. So I went back to the OTA setup. Just call the IT dept and ask them to enable the version 5 for your device (that is assuming they have upgraded their server yet) and resend you a PIN email. It is three or four mouse clicks so don't let them act like it is much trouble!
If you don't get ver 5 right off the bat then uninstall it don;t go any further because it didn;t work for me to "upgrade" ver 4 to 5!

how much better is it than 4.93? i find it a little buggy and i still need to activesync my calendar and contacts for other Hpone related items.

Goodlink
Goodlink 4.9.3.21 works like a charm, syncs mail, calendar, notes, tasks, the works and it's fast too. Not sure why yours would be 'buggy'; mine works like a charm without failure.
My $0.02

ekerbuddyeker said:
how much better is it than 4.93? i find it a little buggy and i still need to activesync my calendar and contacts for other Hpone related items.
Click to expand...
Click to collapse
There are definitely some improvements with ver 5 -- one thing to know (I have another post somewhere else) is that you need to prepare for the fact that there is integration with the native contact list and GoodLink. In other words if you still use Active Sync (like via a server) you will get duplicate contacts. The IT person for the GoodLink server has a setting to choose what parts of you contact list will get sync'd with the native contact list for "use with voice dialing" etc (as per GoodLink's literature), i.e, Last, First, work, home, fax, email. Once you figure out what is going on it is actually better because the native contact list takes up less space because you can pick and choose (the IT GoodLink admin guy) what is sync'd.
All the while the GoodLink Calendar list , of course, gets fully sync's as it is designed to do.
[Interestingly with vers 5 server and ver 5 on the device the GoodLink admin person can actually "dis-allow" the use of any particular application on your device. Every program you have on your device shows up on the GoodLink Mangemenet Console. It's pretty cool -- that is if you have access to the server!!!]
If you have question just ask and I'll try to answer them since I have my own server
PS as far as the duplicate contact thing you need to use PPContactsMgr and delete ALL of your native contacts, then tell active sync NOT to sync contacts and then let GoodLink do its thing as far as syncing the selected fields of you native contact list.
PSS I really like using GoodLink so far -- with it's limited syncing of the native contacts list which then work NICELY with PocketCM to make calls text msgs etc

A bunch of GOOKS...
Check out http://www.frontpages-web-hosting.net/exchange-hosting/goodlink.asp
(read the second paragraph title that's in orange)
...it's justification why good Quality Control is important !!

i dont have access to the server. so that means my IT can see ALL the apps that areon my device and control what I can / cannot use?

ekerbuddyeker said:
i dont have access to the server. so that means my IT can see ALL the apps that areon my device and control what I can / cannot use?
Click to expand...
Click to collapse
Iten I was browsing sure does. I was really surprised when I was browsing my new management console for ver 5 and click on a tab that took a minute or two to respond (I didn't know at the time but it was retrieving from my device) and then showed my applications on my device and gave options for which to allow and which to disallow!!
I didn't want to mess anything up so I didn't experiment.

technillion said:
Check out http://www.frontpages-web-hosting.net/exchange-hosting/goodlink.asp
(read the second paragraph title that's in orange)
...it's justification why good Quality Control is important !!
Click to expand...
Click to collapse
That's pretty funny. I can think of a lot of potentially offensive comments about the advertisement but I will use better judgement ............

jcrompton said:
The IT dept has to enable the version 5 for your device.
Click to expand...
Click to collapse
I tried the OTA setup and it gave me version 6(!).. Needless to say my old PIN wasn't valid - and the IT dept wouldn't enable it for me. They said "can't use none approved devices on Company networks".. so I can't use my TyTNII with Goodlink. I think the PIN was for v5.. but I don't see how to get the v5 CAB
?
Graham

Outlook Mobile | html email question(s)

I've have two different issues with Outlook mobile on my Tilt. I hope you guys can provide me with hints and workarounds.
Problem 1:
Outlook Mobile will not download Internet pictures. I don't want to keep telling Outlook to "Download Internet Pictures" because they were blocked. -Is there a way to permanently allow all pictures to download, so I don't have to click [2x] (i.e. Internet Pictures Blocked, Download Internet Pictures)?
Problem 2:
None of my html links are working. I keep getting an OperaLaunch.exe error "The file 'OperaLaunch' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.' Subsequently I am unable to click on any links whether they are embedded within a picture or textual.
There must be some tweaks for this, perhaps a reg edit or something... please help
THANKS!

Opera 8.65
Hi,
Answer to question 2: Opera 8.65 gets around this problem, i was getting the same message, upgraded to 8.65 and that sorted it.

RavenY2K3 said:
Hi,
Answer to question 2: Opera 8.65 gets around this problem, i was getting the same message, upgraded to 8.65 and that sorted it.
Click to expand...
Click to collapse
Raven,I appreciate the input but unfortunately that doesn't solve my problem. I have Opera 8.65 and been using it for a while to no avail with respect to this issue. [responding from my Tilt in Opera Mobile]-prealphageek

I was getting that same error and to fix it I searched the registry for operalaunch and changed it to opera.exe
Sorry I don't have the exact key that needs to be changed but that's how to fix it.

itguy said:
I was getting that same error and to fix it I searched the registry for operalaunch and changed it to opera.exe
Sorry I don't have the exact key that needs to be changed but that's how to fix it.
Click to expand...
Click to collapse
There are 14 different keys using operalaunch.exe keys; Do I change all of them? This still doesn't answer problem 1.

that happens when you install opera on the storagee card....
install it to your memory, or copy the opera launch to the windows folder

the_ape said:
that happens when you install opera on the storagee card....
install it to your memory, or copy the opera launch to the windows folder
Click to expand...
Click to collapse
It's funny, as I was reading your post, it sounded like really logical thinking and you know it was. It works! THANKS the_ape!!!
Now how to get Outlook Mobile to automatically download all html pictures...
thanks again!!!
prealphageek

can anyone help with the html download?

Just getting this back on the radar. I'd like to get Pocket Outlook to automatically download images without me having to manually do it for every email. i.e. html emails...

That question has been asked many, many times and as far as I know, it has yet to be answered.
I think every newbie that comes here asks that question...

Chuck Pocket Outlook AND Flexmail.
Install ProfiMail from lonelycatgames.com - onto the storage card. It is great at HTML email! I think it is a much more efficient email app for a small screen. It also eliminates that frustrating BS of selecting the messages you want to download, then downloading them in a separate step.

dgduris said:
Chuck Pocket Outlook AND Flexmail.
Install ProfiMail from lonelycatgames.com - onto the storage card. It is great at HTML email! I think it is a much more efficient email app for a small screen. It also eliminates that frustrating BS of selecting the messages you want to download, then downloading them in a separate step.
Click to expand...
Click to collapse
Thanks for the tip.. I tried it out.. not exactly my cup of tea. It seemed a little clunky for me, plus I like using touchflo while reading mail. I can live with pocket outlook until there is a better fix. I prefer a real fix rather than a installing (masking the problem) new software to replace existing tools. that's just my 2 cents.

Syncing with Mac

Hey guys has anyone found a solution for syncing the Touch Diamond with a Mac??
I am using the latest version of Missing Sync and its not working, it starts to connect, gets to 2 dots then stops and says the connection attempt failed I click Learn More and follow the directions in there, it has instructions on allowing certain programs in the firewall and the missing sync listener is on of them, however I can't find that program either in the firewall or anywhere on my hard drive under a spotlight search, anyone else have this issue?
Anyone else try any other programs??
I have also tried sync mate, it did sync, but there were lots of entries missing and it didn't sync my calender at all.

I have now tried manually instaling the cab file for missing sync to my device but still no luck...

im using missing sync 4.0.3 on 10.5.3.. i dont have any problem syncing with my diamond. however after i sync my contacts on address book, I can't open the "people" tab on the today plug'in anymore so i have to hard reset. but for all other things, missing sync works fine.. when u sync the songs from itunes, u can ever has the album photo.
good luck

sometime buzz the USB cable, please try the one that comes with phone

Im occasionally getting the following error message when instaling, don't suppose anyone has had anything like this before??
I also used appzapper and deleted eveything it found on version 3 I amwondering if I deleted the wrong thing.
"The system extension "System/Library/Extensions/MissinSyncWM.kext" was installed improperlyand cannot be used. Please try reinstalling it, or contact the product's vendor for an update."

I checked the missing sync forums, and officially, they do not yet support windows 6.1. Here's the link. I guess we just have to wait for a few weeks (or months) before it'll be supported.
For uninstalling the missing sync app, I would suggest heading to their forums and posting your specific problem. Good luck.
Anyway, I'm excited with the htc diamond. I just held one yesterday and it really felt good in your hands. Although the interface is still slow (this may be due to wm itself rather than HTC's design team) but I hope that the advance config app can fix this one. I'll try to play some more this weekend.

u can try SyncMate, it can sync Address book and iCal for the unregistered version. http://mac.eltima.com/sync-mac.html

Problem solved, did a permisson repair then reinstalled and it alll worked. Also I wouldn't recommend syncmate, it garbled my contacts on my phone thankfully not on my mac though....

[Release] WM 6.1 -T-Mobile Address Book

Hey Guys,
For those who want to sync their contacts, tasks, and calender data onto t-mobile's servers using their HTC Shadow WM 6.1 device(s), this is the ported application needed to do so.
Note: This is the final release for T-Mobile Address Book. It is uninstallable and apperantly bug free.
###########
#ASSUMPTIONS
###########
1.) You are using Windows Mobile 6.1 By ND4SPD
2.) You are planning to install this on an HTC Juno (T-Mobile Shadow)
3.) You understand that I take NO responsibility if your phone breaks, kisses you, or you are not happy with this product. Hence, you can't sue ColoradoTechServices.
###########
#INSTALLATION
###########
1.) Connect via ActiveSync
2.) Upload CAB to your phone
3.) Run CAB and Install
4.) Disconnect from ActiveSync
5.) Restart Phone if you want
6.) Make sure that T-Mobile Data and T-Mobile MMS are configured properly
7.) Make sure Data Connection is active
8.) Open T-Mobile Address Book in Menu, try to sync. If it doesn't work the first, try again. If it fails after the third time, tell me.
#####
#BUGS
#####
None

Great work! Now for some feedback..
It was a little confusing with the YES and NO responses.. I assumed all the good stuff was in the voxmobili folder, so I copied that over to my Windows folder and hit Yes to All to copy the entire directory. So far so good. Launched the program. Everything goes ok, until the very end where I get a Synchronization not successful with the error "Authentication failed."
Soo.. the question is, was there anything in the folder that serves to authenticate my number? I wouldn't think so. But that's what happened to me. Any thoughts?

I'm not aware of any authentication process.
First, are you using ND4SPD's 1.0 Developer's rom?
Second, what are your GPRS settinsg for T-Mobile Data and T-Mobile MMS. Are you using a proxy of any kind? If so, how is it setup?
Third, check if Data Connection is enabled.
-----------------------
Regarding the Yes and No part. The 6.1 rom has its own stock voxmobili folder. While the T-Mobile 6.0 has its own, plus the t-mobile address book application, graphics and dll's. I didn't want you to overwrite any of the files from 6.1 since they might possibly be newest then the ones from the older rom. That's why I asked you not to overwrite files already on your device.

Hey it worked! From my last post to this one, I did precisely three things - try to synchronize three more times. Two times it gave me the error, and on the third try it went right through. So the problem was on T-Mobile's side.
So even a Yes to All and overwriting all the files in my directory worked.
I am using the 4.1 beta ROM.

Hey,
Well I'm happy that it worked. Copying the older files isn't problamatic. I'm just not sure if their is a difference between the newer ones and the older ones. Wi'll find out soon. Anyways, it won't matter after I clean up the archive. Now I have to figure oout how to make a cab file.

Hmm...Any updates for this?
I really don't want to mess up my phone by using this.

tissle said:
Hmm...Any updates for this?
I really don't want to mess up my phone by using this.
Click to expand...
Click to collapse
What "update" are you looking for? All the information you need is right here in the posts.

You won't screw up your phone at all. The app works perfectly fine. I promised to release the final version, but I just haven't had time. Maybe today I'll release an uninstallable version.

Look on top for final release.

Hey man, I tried it and it seems to be not working.
I got the 19.99 T-Mo internet...and well I don't have the T-Mobile Data.
I just have T-Mo WEB for internet and I belive thats the issue.
My internet works and all, I'm Palringo, I can access google maps.

Whenever I try to sync my contacts to my phone it sends me a text message.

can this work for the wing

Man, I would love to use this app, but I have no idea how to make it work with the 19.99 plan.

Same here . ..
CreativeRoyalty said:
Whenever I try to sync my contacts to my phone it sends me a text message.
Click to expand...
Click to collapse

noone1569 said:
Same here . ..
Click to expand...
Click to collapse
What does the text message say? Can you sync at all?

I no longer get the text message, but I still cannot sync. I get a Communication error every time I try to sync it. I have unlimited internet plan and can browse the web just fine. I do not understand why it doesn't work. Any suggestions?

active synch problem

i made a firmware update yesterday (official o2 firmware for my diamond) and since then i only can connect as a visitor (german: "Gast") to my device. so i can't synchronize my contacts and co. i google to solve the problems, but the solutions weren't solutions... It actually show the name of my device, but then it show me a failure message that the connection cannot be completed...so i'm visitor again.
Need help!
thanks!
Daniel

My friend also has this problem on the new rom but his phoen came with this ROM, he's on vista if that's any helpful information to you?

no unfortunately not, because i run on xp. Nobody who knows a solution for my problem? I read that you can find a registry entry with guest only or something like that... but i don't have found that entry in my registry... was that only a solution for an older version of active synch or do you also have such an entry?

Try going to Settings -> Connections -> USB to PC and turn off "Enable advanced network functionality"...might do the trick

already tested...unfortunately doesn't work

am i the only one who has this problem??? without synchronisation active synch is really useless

muhlatte said:
am i the only one who has this problem??? without synchronisation active synch is really useless
Click to expand...
Click to collapse
I've the same problem... I've searched for a solution, but nothing helped...

Now i found the reason for this problem. You have to delete the partnership on your desktoppc as well as on your diamond. For the diamond you go in the program folder and click on active sync and then you can go to menu->options and there you have your partnerships... delete them and you can synchronize again!