Related
I've been searching on every possible site I can find to no avail. help. So I wonder if anyones done this?
I run my Qtek 2020i with O2's firmware in Corp. mode now. But I miss the Today screen's Battery bar.
Does anyone know how to pull this though into the corp. mode? or install it from ripping file from the O2-Active side?
Any help or guides etc would be ever so useful.
Sym
I wanted just that bit too.
I spent a bit of time messing around with a Blue Angel Extended Rom and managed to find the o2Active installer CAB, Hacked it added the right DLL for the XDA2i and got it working, Unfortunately it does have the original setup DLL in there so asks for corporate or personal but it only adds the batteryinfo.dll and the today screen.
Well enough of that here it is enjoy
Riptos
Thanks riptos, your a star.
Thanks from me too.
Guys have you considered this little battery meter (single bar running across the top of the screen like Spb's version)... see attachment below...or one of its many variants (inc back up battery and/ or memory status) discussed under
Not as gucci graphics wise as the O2 one I grant you (see other attachment) but it takes up a lot less real estate for the same job.
The CAB download file is at:
http://forum.xda-developers.com/viewtopic.php?t=21699&postdays=0&postorder=asc&start=25
Cheers - Mallow1
riptos said:
I wanted just that bit too.
I spent a bit of time messing around with a Blue Angel Extended Rom and managed to find the o2Active installer CAB, Hacked it added the right DLL for the XDA2i and got it working, Unfortunately it does have the original setup DLL in there so asks for corporate or personal but it only adds the batteryinfo.dll and the today screen.
Well enough of that here it is enjoy
Riptos
Click to expand...
Click to collapse
Thanks riptos, I've been looking for this as well even though I have the T-Mobile MDA II. I don't know if it'll work or not, my original MDA II "Today" battery meter disappeared when I updated to ROM 1.72.00 GER.
Thanks here also Riptos,
I installed it in my XDA IIs and it is working just fine.
does this cabfile work for other countries apart yours?
in malta i use vodafone as service provider{ and also gomobile.......}
if i install this cab file will it then make the battery status appear on my today screen ?
or it has nothing to do with the service provider.............
You can install it no problem, it won't effect anything else, it will just put the battery bar on your today screen.
i've installed it and did the soft reset but i cannot see the bar!
i've got the spb pocket plus, would this cause some sort of clash?
UPDATE: i've uninstalled spb pocket plus and still no indicators on screen.
O2 Battery Bar
Try deselecting from today screen items and exit to today screen, then selecting from today screen items and exit. If it isnt in the list it wasn't installed properly.
Riptos
there is no batter bar in the today screen option... first thing i looked at!
got it to work... thanks alot buddy......
Regards
Many thanks for the OS Battery Plugin
Thanks riptos, your a star.
Webluxor.com web luxor (860)-865-0246
is anyoen else having issues with ultimatelaunch? i ahve to constantly soft reset. is it because i have a trial version as opposed to the paid for version?
closet410 said:
is anyoen else having issues with ultimatelaunch? i ahve to constantly soft reset. is it because i have a trial version as opposed to the paid for version?
Click to expand...
Click to collapse
I've been running Ultimatelaunch for about a month (unregistered) with no stability issues.
Try searching here. They have answered a lot of questions. If you don't find it then post. They are pretty good about getting you an answer.
no issue for me I use it with SPB mobile shell , pocket plus, pocket weather, rltoday
Do not put today plugins inside UL and on the today screen at the same time .... that causes me problems
starfish_001 said:
no issue for me I use it with SPB mobile shell , pocket plus, pocket weather, rltoday
Do not put today plugins inside UL and on the today screen at the same time .... that causes me problems
Click to expand...
Click to collapse
thanks! that is what i've been doing. so what do you do? i want teh htc home plugin to start up and incorporated in ultimatelaunch
Yeah, make sure all today plugins that you want INSIDE the Ultimate Launch are UNCHECKED to be on your Today Screen.
met3ora said:
Yeah, make sure all today plugins that you want INSIDE the Ultimate Launch are UNCHECKED to be on your Today Screen.
Click to expand...
Click to collapse
I am using PhoneAlarm on the Today Screen and the following inside of Ultimate Launch
Weather Panel
Battery Status
Today Agenda
Seems to work with one exception.
If I go to Mail, open the keyboard (Rotate Screen) then go to the today screen and close the keyboard, INSTANT LOCKUP. If I stay in mail, and go back to the closed position, I am fine.... Otherwise seems to be working.
i have been having problems too... since i installed UL my user interface has been extremely lagging. and i have tried all kinds of ways to get it working perfectly like how everyone says it works.
a lot of people says it works perfectly with out anything, but wheni have it installed it laggs up unbelievably...
i even have to put a back up until the latest time in order to get everything working.
hi,
i´m using ul for 2 month now and everything works fine! i use todayagenda and htc home inside ul and the wireless today plugin above and my mailprogram (tobit david) among ul.
cu
pomfiedel said:
hi,
wireless today plugin
cu
Click to expand...
Click to collapse
What program is this? Is this for WIFI?
i was forced to remove it and back up at the same time. i am very hesitant at trying it again.
but just a question, where did you guys install it in, device or storage card?
ChInEsE ChIcKeN said:
i was forced to remove it and back up at the same time. i am very hesitant at trying it again.
but just a question, where did you guys install it in, device or storage card?
Click to expand...
Click to collapse
To device memory of course!
Never install Today Plugins to your Storage Card, that can cause problems!
Hi there guys,
been searching if anybody had the following problem, then i stumbled on this thread, where somebody might be able to help me.
I had a qtek 9100 before with ultimatelaunch, with today plugins in ultimatelaunch. This worked perfectly, nothing wrong.
Recently, i purchased a Kaiser (to be precise, a T-mobile MDA Vario 3), on which i tried to run Ultimatelaunch. Everything works fine, except after i launched an application & go back to the today screen. When i run tomtom for example, and i go back to the today screen, the ultimatelaunch part is not automatically refreshed. If i just press in the area once, its redrawn. Does anybody have the same issue, or even better, a suggestion on how to solve it?
thnx in advance,
greetings hawkeye
out of curiosity what did you guys put in your UL, app wise?
My system backs up nightly and I soft reset after every backup. I believe this eliminates many issues with my system.
After 3 weeks of testing, I do not have lockups with this combination.
Icons: XP
Registration: Demo
Main Tab:
Device lock
Messaging plug In
Clock
Today
Tab 2:
Outlook / Word / Excel / PPoint
Contacts / Calendar / Checklist / Notes
Olivetree bible / Notepad (similar to desktop Notepad)
Tab 3:
Weather / Microsoft Live Search/ Garmin
Weather To Go
Tab 4:
PIE link to XM Radio
PIE link to Shoutcast
WMP
MobiTV
MobiReader
TCPMP
Photos
Camera
Playslist Manager
Voice Recorder
Adobe Reader
Paint
Tab 5
Outlook
PIE link to Google Reader
PIE
Skype
Comm Manager
Remote Desktop
Tab 6:
Total Commander
Ultimate Launch config
Calculator
File Explorer
SBP Backup
Activesynch
HTC Home Plug (9 Icon)
What program is this? Is this for WIFI?
Click to expand...
Click to collapse
this is a today plugin which is activated by the kaiser tweak and it shows if wifi and bt is dis-/enabled.
to switch wifi on, i have a button in ul.
cu
does anyone find that activating the htc home screen on start up cause problems? or better yet does anyone have any tabs that they activate on start up?
also having problems when using home customizer. it seems to freeze ultimatelaunch for some reason
HTC Home works fine for me.
All my tabs (just three), have activate on startup enabled.
Tab1
PocketBreeze
Tab2
PocketPlus
Tab3
HTC Home (only weather tab is shown)
closet410 said:
also having problems when using home customizer. it seems to freeze ultimatelaunch for some reason
Click to expand...
Click to collapse
Problem is that HHC check if HTC Home Plugin is enabled at startup.
Because it thinks it's not, it starts HHC. After making changes, it will try to copy changed file's to HTC Home directory. Because HTC Home is loaded into Ultimate Launch that will fail, and make Ultimate Launch crash!
Best for you to do is, disable Ultimate Launch on your today screen, start HHC and make changes to plugin, then after applying re-enable Ultimate Launch. (Uncheck HTC Home, it's auto enabled trough HHC.)
That should work for you.
johanromijn said:
Best for you to do is, disable Ultimate Launch on your today screen, start HHC and make changes to plugin, then after applying re-enable Ultimate Launch. (Uncheck HTC Home, it's auto enabled trough HHC.)
That should work for you.
Click to expand...
Click to collapse
When I was testing HTC Home with UL, that's the same thing I did.
anyone care to chime in on this??? Is it worth going to the spb? Can you install over top of latest Dutty? Looks pretty cool!
Dutty is a rom..... SPB MS 2.0 is a program. It'll run on any rom.
Yeah I know that it is... I guess I was meaning how does it compare to just running HTC home? Worth the buy?
airric00 said:
Yeah I know that it is... I guess I was meaning how does it compare to just running HTC home? Worth the buy?
Click to expand...
Click to collapse
You can download a trial for it. Mods please move this thread the Kaiser Software forum.
but this has nothing to do with dutty's rom..
for me its worth the buy...read more on the spb website
sorry..
Guess I should have posted over there sorry..
SBP products run great and are essential for any phone but I only use SBPdiary w/HTCH on my Today screen. Most of their products run great in the background, SBPTime for powerful alarm clock, stop watch, and world timer. SPB Phone Suite excellent calling features that can run in the background as well.
I typically enjoy HTCHC but from time to time I wish I had the artistic and technological skills to create something different
I have a Tilt, and I tried installing both SPB Shell 2.0 and SPB Pocket Plus 4 on Dutty's April 1st rom, and they worked but did one weird thing, when the phone would boot up the signal would go in and out, flashing there, then not there, then there etc., it would do this for almost a minute before finally locking on a signal.
airric00 said:
Yeah I know that it is... I guess I was meaning how does it compare to just running HTC home? Worth the buy?
Click to expand...
Click to collapse
I would say that the SPB Mobile Screen 2 program is awesome! I have been using it on top of Dutty's Light rom and it works great. Real smooth and responsive, lots of customization options as well as nice fit and finish which is hard to find on a WM6 product.
If you want a free version you can always check out .... to find all the crack codes for almost any software package out there.
As far as the downsides go, it eats battery faster than normal, it does not run on your today screen which bothers me and you can OK through it and go back to your today screen. That problem is slightly solved by SPB making it your default app when you start up the phone and bring it back from sleep which elevates most of the issues.
I just flashed my phone and am going to try giving HTC Home Live a chance, but if I do not think it is customizable enough I am going straight back to SPB... Before I forget to mention, SPB has one of the best opening screens I have seen so far, it has a email, missed calls and text messages right on the front, as well as weather, call options, clock, and the best part a calendar with dates and your schedule all in an easy to read form.
I hope this clears up something for you. Hopefully you wont have to pay for it, but if you do, I would actually say it is worth the 30 bucks.
brianlau said:
If you want a free version you can always check out removed by me to find all the crack codes for almost any software package out there.
Click to expand...
Click to collapse
Have you lost your mind man? Warez is strictly prohibited here. I suggest you edit it out. Please no warez, cracks, serials, keygens or anything of the sort.
P1Tater said:
Have you lost your mind man? Warez is strictly prohibited here. I suggest you edit it out. Please no warez, cracks, serials, keygens or anything of the sort.
Click to expand...
Click to collapse
Sorry my bad. Just trying to help people out. Will know now for next time.
I use spb mobile shell and love it. its very finger freindly and extremely useful.
californiarailroader said:
I have a Tilt, and I tried installing both SPB Shell 2.0 and SPB Pocket Plus 4 on Dutty's April 1st rom, and they worked but did one weird thing, when the phone would boot up the signal would go in and out, flashing there, then not there, then there etc., it would do this for almost a minute before finally locking on a signal.
Click to expand...
Click to collapse
That's because weather updates on bootup.
It sucks but does level off & then everything works.
Besides that, they both work excellent for me together
airric00 said:
Guess I should have posted over there sorry..
Click to expand...
Click to collapse
I tried the spb mobile shell trial and it's also nice.
Try Pointui as well, you might like it and not buy spb mobile shell at all. The last time I tried this was when it just came out in Alpha stage and it did quite well and was fast with the original, slow wm6 OS that came with my Tilt
dwny said:
That's because weather updates on bootup.
It sucks but does level off & then everything works.
Besides that, they both work excellent for me together
Click to expand...
Click to collapse
Ahh, so that's what's causing it, I was going nuts trying to figure out why that was happening with them, thanks dwny! It does level off after a minute or so like you said and then it's fine, I was thinking it was screwing with my signal or phone, but if it's normal and not a problem, I am putting them back on. I am so glad you posted this, I was missing my SPB stuff, HTC Home just isn't cutting it for me. I had hard reset the Tilt and reloaded Dutty's Rom, and left off those programs because, like I said, I thought it was an error.
Edit-If I shut off the weather, will it stop that behavior? I don't use the weather on SPB MS, It doesn't have the weather for my town of Redwood Valley, I use Weather Bug and Weather Watcher for that. It's weird, I didn't have this issue when running MS or PP on Laurentius's ROM's. I take it that the signal thing is only visual, ie.the signal is actually okay, but while it's updating at boot up it "shows" it as going in and out, no?
andrukit said:
I tried the spb mobile shell trial and it's also nice.
Try Pointui as well, you might like it and not buy spb mobile shell at all. The last time I tried this was when it just came out in Alpha stage and it did quite well and was fast with the original, slow wm6 OS that came with my Tilt
Click to expand...
Click to collapse
Be careful with Point UI, it's tricky to uninstall (there is no uninstall for it in the "remove programs" page), and it leaves pieces of itself of it allover. I tried it too, and it has a ton of potential, but they really need a way to get it off the phone, right now it's an exercise in frustation.
californiarailroader said:
Be careful with Point UI, it's tricky to uninstall (there is no uninstall for it in the "remove programs" page), and it leaves pieces of itself of it allover. I tried it too, and it has a ton of potential, but they really need a way to get it off the phone, right now it's an exercise in frustation.
Click to expand...
Click to collapse
Quick question, what did you think of Point UI? worth installing and flashing again? I am fumbling around with a lot of different UIs? I have tried Ultimate Launch (bit too complicated for me to setup the way I want, SPB Mobile Shell, (but it drains too much batt), HTC home (not customizable enough.) If you could let me know a little more about the POINT UI that would be awesome before I put it on my phone. Thanks buddy.
Brian
brianlau said:
Quick question, what did you think of Point UI? worth installing and flashing again? I am fumbling around with a lot of different UIs? I have tried Ultimate Launch (bit too complicated for me to setup the way I want, SPB Mobile Shell, (but it drains too much batt), HTC home (not customizable enough.) If you could let me know a little more about the POINT UI that would be awesome before I put it on my phone. Thanks buddy.
Brian
Click to expand...
Click to collapse
you tried htc home customizer w/ quick launcher?
There are many customized icons, clocks, backgrounds, and weather views. In addition w/ quick launcher you have an extra row of tabs, which you can change to go to any program (and icons of course).
I stuck with HTC embedded inside Ultimate Launcher.
Ultimate Laucher is not that complicated if you look carefully a little bit of patience and you'll get the hang of it, moreover you could just copy your Ultimatelauncher.ini file as backup to have the same setup each time in case you like flashing roms a lot.
For HTC Home there's HTC Home Customizer, lots of icons to download.
I've tried most of them, but i always end up with the simplest setup I guess I got tired of fancy sliding and multiple clicks, the fewer clicks to find what I need does it for me.
Btw, there's another nice today app I'd like you to see it's rlToday Check it out
brianlau said:
Quick question, what did you think of Point UI? worth installing and flashing again? I am fumbling around with a lot of different UIs? I have tried Ultimate Launch (bit too complicated for me to setup the way I want, SPB Mobile Shell, (but it drains too much batt), HTC home (not customizable enough.) If you could let me know a little more about the POINT UI that would be awesome before I put it on my phone. Thanks buddy.
Brian
Click to expand...
Click to collapse
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
I have the same question- does anyone have any answers to this ? For example , I want to have the RSS feeds in my home screen along with TFLO3D ? is it possible?
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
look here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_ext_cust_im_cs.htm
Puckmeister said:
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Click to expand...
Click to collapse
offtopic ...
you don't have to wait if you are o2 customer
johnkorver said:
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
Click to expand...
Click to collapse
just had the same idea, ul didn't work at all
hopefully there will be a new ul version with diamond support
tf3d is so nice, i wish i could remove the internet tab and replace it with batterystatus instead!
Guys try this program http://www.chi-tai.info/download/SecondToday.zip and do this:
Copy SecondToday.exe to your desired location, e.g. \Program Files\SecondTody\SecondToday.exe and start the application
and then just copy the program again to windows start menu, and then add it to program list in the htc touch flo. then when ever you want it just click it.
Until now this is the best way to fix it
I went to their site I didn't understand anything. What does SecondToday do? I can get something from its name, but how does it actually work?
Direct download is impossible: go here: http://www.chi-tai.info/cs_wm_tools_im_cs.htm
basically what it does is that it is a program that opens the today screen without touch flo
fataldeath44 said:
basically what it does is that it is a program that opens the today screen without touch flo
Click to expand...
Click to collapse
Thank you for making that clear. Can you return to TouchFlo afterwards?
is it possible to run this second today - thing in autostart without interfering with touch3d?sometimes it does not open when i execute it...
i need to keep an eye on my calltimes and umts-data because both is limited due my contract and the only tool that handles both is (as far as i know) battery status...correct me if i'm wrong. gprs counter is bundled with my diamond but it isn't able to count call times...
edit: just tested it and second today always gets closed (or crashes) when touchflo3d is enabled...i can add plugins to 2nd today but when i switch back to touchflo3d second today not listed in taskmanager anymore after a couple of seconds.
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
touch-it said:
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
Click to expand...
Click to collapse
I use a program called Ariel Battery and disabled the default battery icon. Put Ariel Battery in your startup folder, you can modify color schemes, it's small and even shows you the %.
amir77a said:
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
Click to expand...
Click to collapse
You will find the answer in that thread: http://forum.xda-developers.com/showthread.php?t=401907
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
sorry about the double post!
p.dixon0 said:
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
Click to expand...
Click to collapse
As far as the PocketPlus, I am using it and I haven't had a problem at all with the icons or anything else for that matter. I haven't had any problems with the txt msgs either. You may need to reset the mms server?? I don't know about that, I just remember reading about it in another thread somewhere... As for the backdrop change, that's not a pocket plus related conflict. I am not sure what else you have installed, but I have changed mine multiple times in the past 2 days and haven't had a single problem or anything that told me I had reset or that I needed to soft reset the phone. I would suggest unistalling the Pocket Plus and reinstalling it. I know that I have had to do that before because of one of the other SPB proggies i used had changed some values in the registry for it. Otherwise, I would contact SPB, they would know how to fix it. Unless you didn't purchase it...
Hi Killerbeans!
I'v tried uninstalling and re-installing a couple of times to no avail unfortunately
The only other things I have installed (all bought and paid for!) that startup with the phone are SKTools (set to performance optimisation) and Kasperski AntiVirus...
I might try uninstalling those and SPB and reinstalling them one by one...
Cheers for the response though!
I have been havng the spb problems since 6.1 installation as well (I am with AT&T in the US, original Kaiser).
Thanks for pointing out the "Refresh All Tabs" option...I have to stupidly admit that I was not aware of it and I have been fixing the icons one at at a time....very boring...However, I have no solution to offer to the problem, other than to verify that it is a real one.
Hmm running fine on my kaiser with the hyperdragon roms...
Are you using the "close button" plugin? if so, did you enter tmail.exe and poutlook.exe as exceptions? don;t doing this could lead to problems
for the icons, I have the same problems too sometimes, did you install it on main memory? are the missing icons from programs installed on storagecard?
there is an option under today plugins->advanced, "refresh icons in today plug-in when storage card is inserted." try enabling that and see if it helps
Bartus
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Go back to 4.0.1 it doesn't have the problem.
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
p.dixon0 said:
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
Click to expand...
Click to collapse
did it work
Today Plugin Problems
I also use pocket plus on my Tilt, and it is apparently version 4.0.2 build 6227. What really annoys me is that the today plugin worked perfectly on wm 6.0, but after that &[email protected]#! 6.1 upgrade, it works fine for a few hours after I installed a lot of programs and soft resetted a bunch, until I backed up my phone. After using sprite Backup 5 ONCE, it deletes all my tabs and icons in the plugin and doesn't remember them no matter what I do. It still is checked in the today plugins menu, but it isn't there as there is nothing for it to show. SPB's got some serious work to do.
Dave
p.dixon0 said:
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Click to expand...
Click to collapse
Today plug-ins shoud be installed to Main Memory.
Spb 4.01 works far better than 4.02 IMO.