I know there is a tweek to disable the beeps for in-call volume changes, but is there a tweek to disable the beeps for all volume changes? I do not want to disable all sounds, just the volume change beeps? I have searched through the threads and if I missed it I am sorry...please point me to it if I have.
Rudix
Hey Rudix,
Check this thread out: http://forum.xda-developers.com/showthread.php?t=317784&highlight=in+call+volume+beep
Gavin.
You can also try using Advance Config v2.0 which has two options to change the volume beep. When using cooked ROMs the there is another place in the registry that requires changing.
Hi
I tried advanced config, but had no luck in turning of the volume change beep (the "in call") beeps are off. Any ideas?
I am having this same issue. Any idea to stop the volume change sound? I want the volume buttons to be always silent.
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP and on also on my Wizard (running WM6.1) so I assume it'll work on a Tilt/Kaiser too.
Cheers,
/Cacti
Related
I have tried to find a thread on this issue, but to no avail.
I use HTC Home with the new ATT 6.1ROM.
With Bluetooth activated I will often use HTC Home to change ringer settings. When I have the phone on Ring & Bluetooth and all volume up everything works fine.
After I switch to Vibrate or Off then back to Ring I find that the Phone Volume is not off. It shows as Ring enabled but the volume is turned off.
Is this due to Bluetooth? Is there any way to stop this from occuring as I dont always have my bluetooth in and the phone wont ring even though i put the Ring option on because the volume is turned off and I keep missing calls.
My work around so far has been that instead of just hitting the HTC Home Ring button, I have to do that and check the volume control. I would like to cut out that last step.
Thanks
the only change i've made to my tilt as of recent was that i added kaiser tweak. however, i've looked thru the xml & cant find anything that'd warrant my profile changing from vibrate to ring w/out myself doing so. I've been watching it for about 2 weeks now trying to discern the action i am taking to cause the change but can't put my finger on it.
so i apologize i'd liked to have known the origin for the change to give you more info. but this is basically all i know.
i typically keep my ringer on vibrate. for some reason it changes to the ring profile automatically and periodically throughout the day. the only change i've made prior to this issue is adding kaiser tweak and a trial for contra, however that has since been removed. oh, sorry, i did add phm regedit to the phone also, the only registry i changed was the PTT registry fix to add button 6, i changed them to voice dial and voice recorder for long & short push respectively.
pls help. thanks. stan
I never had this problem before I upgraded to AT&T's 6.1 ROM. They added the PTT button to be remapped, but single push only. I did the registry change to remap a push and hold to Vibra Switch.
The problem I have is my phone keeps going to silent. I have to tap the volume control on the top of the screen to change it back. I can't confirm this, but it seems to happen when use SPB Shell's Now Screen phone profile to change to vibrate, but does not happen if I push and hold the PTT button and use Vibra Switch.
KCMatt said:
I never had this problem before I upgraded to AT&T's 6.1 ROM. They added the PTT button to be remapped, but single push only. I did the registry change to remap a push and hold to Vibra Switch.
The problem I have is my phone keeps going to silent. I have to tap the volume control on the top of the screen to change it back. I can't confirm this, but it seems to happen when use SPB Shell's Now Screen phone profile to change to vibrate, but does not happen if I push and hold the PTT button and use Vibra Switch.
Click to expand...
Click to collapse
Do you use a Bluetooth headset?
KCMatt said:
I never had this problem before I upgraded to AT&T's 6.1 ROM. They added the PTT button to be remapped, but single push only. I did the registry change to remap a push and hold to Vibra Switch.
The problem I have is my phone keeps going to silent. I have to tap the volume control on the top of the screen to change it back. I can't confirm this, but it seems to happen when use SPB Shell's Now Screen phone profile to change to vibrate, but does not happen if I push and hold the PTT button and use Vibra Switch.
Click to expand...
Click to collapse
then it's prolly by my having done the reg edit to add the ptt button for long & short press...makes sense...but i wonder why? i cant say that it has to do w/ when i push it either, bcuz by doing it it doesnt force it to change to ring from vibrate. but i dont use spb tho either.
edit: oh yeah...i do use a BT headset, but its sporadically used & not correlated to the automatic volume changes.
same issues
I am having problems as well with my sound options after i upgraded to 6.1. I have not made any modifications to the phone except for the 6.1 upgrade. It is also having the problem with the backlight turning on for a second every now and again.....
I have the same problem after using my bt headset. It goes to silent.
Any update on this issue? I just upgraded my Tilt to 6.1 and I notice that it will automatically turn the ringer off and I have to manually select the automatic ring profile again
Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds¬ifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.
There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH
ringtone problem
yea all 3 volumes are set to the max level
ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way
Have you got any profile managers installed (G-profile, Phoneweaver etc)?
ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you
Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.
Does anyone know of a way to lock ringer volume at full volume? I have come to loathe the volume key placement on this phone as I am constantly turning the volume down or off unknowingly and at this point would like a way to just disable the keys entirely. I am constantly missing calls and notifications because of this. Maybe there is a app or a command that can be changed somewhere in like Mixer paths. Any ideas? Thanks all.
I'm running COS 6.1 A.10 on my unrooted/unlocked European X2 Pro.
When I press the physical volume buttons, I very often don't see the sound control popup. Sometimes it appears and I can change the volume, but in most cases it doesn't appear at all. It doesn't make a difference which app I'm using - YouTube, Prime Video. I don't have an active BT device linked or a headset plugged in either. Quiet Time is turned off, all volumes in Sound & Vibration are turned to medium, the default function for volume buttons is set to Media Volume although nothing changes if it's set to Media Volume.
I used to have MacroDroid to change sound settings based on time/location/events but that's uninstalled. I still have Do Not Disturb which mutes my phone during calendar events. Regardless of any such apps, I should still be able to use the volume buttons to adjust the volume but there are no popups most of the time.
I just restarted my phone and the volume popup is back. I know this happened before but after a while it's gone again without knowing why. Does anyone have an idea what could be the reason and how I can get my volume popup back permanently? Thanks for your help.