vibrate turns off w/out reason? - Tilt, TyTN II, MDA Vario III General

the only change i've made to my tilt as of recent was that i added kaiser tweak. however, i've looked thru the xml & cant find anything that'd warrant my profile changing from vibrate to ring w/out myself doing so. I've been watching it for about 2 weeks now trying to discern the action i am taking to cause the change but can't put my finger on it.
so i apologize i'd liked to have known the origin for the change to give you more info. but this is basically all i know.
i typically keep my ringer on vibrate. for some reason it changes to the ring profile automatically and periodically throughout the day. the only change i've made prior to this issue is adding kaiser tweak and a trial for contra, however that has since been removed. oh, sorry, i did add phm regedit to the phone also, the only registry i changed was the PTT registry fix to add button 6, i changed them to voice dial and voice recorder for long & short push respectively.
pls help. thanks. stan

I never had this problem before I upgraded to AT&T's 6.1 ROM. They added the PTT button to be remapped, but single push only. I did the registry change to remap a push and hold to Vibra Switch.
The problem I have is my phone keeps going to silent. I have to tap the volume control on the top of the screen to change it back. I can't confirm this, but it seems to happen when use SPB Shell's Now Screen phone profile to change to vibrate, but does not happen if I push and hold the PTT button and use Vibra Switch.

KCMatt said:
I never had this problem before I upgraded to AT&T's 6.1 ROM. They added the PTT button to be remapped, but single push only. I did the registry change to remap a push and hold to Vibra Switch.
The problem I have is my phone keeps going to silent. I have to tap the volume control on the top of the screen to change it back. I can't confirm this, but it seems to happen when use SPB Shell's Now Screen phone profile to change to vibrate, but does not happen if I push and hold the PTT button and use Vibra Switch.
Click to expand...
Click to collapse
Do you use a Bluetooth headset?

KCMatt said:
I never had this problem before I upgraded to AT&T's 6.1 ROM. They added the PTT button to be remapped, but single push only. I did the registry change to remap a push and hold to Vibra Switch.
The problem I have is my phone keeps going to silent. I have to tap the volume control on the top of the screen to change it back. I can't confirm this, but it seems to happen when use SPB Shell's Now Screen phone profile to change to vibrate, but does not happen if I push and hold the PTT button and use Vibra Switch.
Click to expand...
Click to collapse
then it's prolly by my having done the reg edit to add the ptt button for long & short press...makes sense...but i wonder why? i cant say that it has to do w/ when i push it either, bcuz by doing it it doesnt force it to change to ring from vibrate. but i dont use spb tho either.
edit: oh yeah...i do use a BT headset, but its sporadically used & not correlated to the automatic volume changes.

same issues
I am having problems as well with my sound options after i upgraded to 6.1. I have not made any modifications to the phone except for the 6.1 upgrade. It is also having the problem with the backlight turning on for a second every now and again.....

I have the same problem after using my bt headset. It goes to silent.

Any update on this issue? I just upgraded my Tilt to 6.1 and I notice that it will automatically turn the ringer off and I have to manually select the automatic ring profile again

Related

Volume Change Beep Tweeks

I know there is a tweek to disable the beeps for in-call volume changes, but is there a tweek to disable the beeps for all volume changes? I do not want to disable all sounds, just the volume change beeps? I have searched through the threads and if I missed it I am sorry...please point me to it if I have.
Rudix
Hey Rudix,
Check this thread out: http://forum.xda-developers.com/showthread.php?t=317784&highlight=in+call+volume+beep
Gavin.
You can also try using Advance Config v2.0 which has two options to change the volume beep. When using cooked ROMs the there is another place in the registry that requires changing.
Hi
I tried advanced config, but had no luck in turning of the volume change beep (the "in call") beeps are off. Any ideas?
I am having this same issue. Any idea to stop the volume change sound? I want the volume buttons to be always silent.
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP and on also on my Wizard (running WM6.1) so I assume it'll work on a Tilt/Kaiser too.
Cheers,
/Cacti

Alarm volume doesn't work

my alarm volume doesn't seem to work, i have the volume turned on, i have the volume cheked in sounds and notifications. I worked before, the only thing i do is turn the phone on vibrate when i go to work and turn the volume back on when i get off, i've been doing this every since i got the phone in november, now all of the sudden the volume doesn't want to work on teh alarm when i have the volume on, when i go to the alarm i get the popup that says make sure the volume is turned on in the sounds and notifications settings, which it is. i did a soft reset that didn't work, i then took out the battery and sim and put them back in thinking the phone just needed to clear itself or what ever kind of like shutting down a pc completely, and that didn't work either, any ideas on this? also every since taking out the battery and sim card, i now i have a blue circle in the top bar next the atenna were if i push it, it brings up the option to ativate PTT anyone know how to get rid of this?
brianlb said:
my alarm volume doesn't seem to work, i have the volume turned on, i have the volume cheked in sounds and notifications. I worked before, the only thing i do is turn the phone on vibrate when i go to work and turn the volume back on when i get off, i've been doing this every since i got the phone in november, now all of the sudden the volume doesn't want to work on teh alarm when i have the volume on, when i go to the alarm i get the popup that says make sure the volume is turned on in the sounds and notifications settings, which it is. i did a soft reset that didn't work, i then took out the battery and sim and put them back in thinking the phone just needed to clear itself or what ever kind of like shutting down a pc completely, and that didn't work either, any ideas on this? also every since taking out the battery and sim card, i now i have a blue circle in the top bar next the atenna were if i push it, it brings up the option to ativate PTT anyone know how to get rid of this?
Click to expand...
Click to collapse
anyone? i managed to get teh second part were i get the blue icon on the top bar to go away, but the alarm part i can not figure out.
Perhaps you should try custom alarm applications like Pocket WakeUp or Mortplayer or something the like.
Most of them can override volume control to a fixed point (even if you put your Kaiser on vibrate, the alarm app starts itself and sets the volume to a chosen strength, like 50%)
Stay0Puft said:
Perhaps you should try custom alarm applications like Pocket WakeUp or Mortplayer or something the like.
Most of them can override volume control to a fixed point (even if you put your Kaiser on vibrate, the alarm app starts itself and sets the volume to a chosen strength, like 50%)
Click to expand...
Click to collapse
i'm not really looking to get a new program, what i had did work fine for me, i just can't figure out what is making it not work, the alarm vibrates, just no sound.
brianlb said:
i'm not really looking to get a new program, what i had did work fine for me, i just can't figure out what is making it not work, the alarm vibrates, just no sound.
Click to expand...
Click to collapse
I had sound problems once. It happened when I set a music program to associate with mp3's (default is Windows Madia Player), once I removed the association, all played normal again.
I think I changed it with the back Advanced Configuration Tool.
Or try your alarm with a wav or mwa file, perhaps you'll get sound then.
No sound
I've had my Tilt for 2 days, and since I flashed the latest Dutty 6.1 ROM I have no sound from alarms, music, sliding keyboard, phone ringer...nothing. I can hear the other caller talking and they can hear me. My phone vibrates but does not ring, even though I have it set for vibrate and ring. Can anyone help?

Volume Control

I have tried to find a thread on this issue, but to no avail.
I use HTC Home with the new ATT 6.1ROM.
With Bluetooth activated I will often use HTC Home to change ringer settings. When I have the phone on Ring & Bluetooth and all volume up everything works fine.
After I switch to Vibrate or Off then back to Ring I find that the Phone Volume is not off. It shows as Ring enabled but the volume is turned off.
Is this due to Bluetooth? Is there any way to stop this from occuring as I dont always have my bluetooth in and the phone wont ring even though i put the Ring option on because the volume is turned off and I keep missing calls.
My work around so far has been that instead of just hitting the HTC Home Ring button, I have to do that and check the volume control. I would like to cut out that last step.
Thanks

Phone volume turns off w/ vibraswitch - any alternatives?

I've searched around and haven't had much luck. I use vibraswitch mapped to my PTT button to switch between vibrate and sound, but sometimes (especially when I'm on the phone and use it), the phone will volume will turn off (speaker w/ x, not on and not vibrate) instead of either switching the volume on or to vibrate. I've missed some calls because of this.
Somebody in a post here said that if you hold down the button u mapped it to for a second it will do this, but this doesn't seem to be the case. If this has been answered before I'm sorry, hopefully somebody can point me in the right direction!
Try this app:
http://forum.xda-developers.com/showthread.php?t=279228
whatabambam said:
Try this app:
http://forum.xda-developers.com/showthread.php?t=279228
Click to expand...
Click to collapse
The only thing about this program is that the phone doesn't vibrate when you toggle between the settings. I change the volume in my pocket a lot so I rely on the vibrates to let me know when I switch.

prevent diamond from waking up when pressing button on bluetooth headset?

When I press pause/play on my headset the device wake's up and I'm able to press all sorts of things on the screen I don't want
does anybody know how to fix this (without installing a screenlock app)?
I don't know what you mean by installing (installing another program or using any lock?) but the inbuilt windows lock seems to protect from such situations. Just tested it with my bt headphones and seems they can wake up, but can;t unlock my diamond.
I had touchlockpro installed before I upgraded to ROM 2.03, because I would accidentally press on buttuns when listening to music and miss calls/ aswer calls in my pocket... so I installed touchlockpro to block everything on wake up...
but now one of the two problems is solved by the ROM upgrade (slide to answer).
So only one (but annoying) problem remains.
I don't want to unlock my phone everytime I take it out of my pocket, especially as this seems to be something that is easily fixed by a registry edit (don't wake up on button press) or something.
so that's the problem, and I can't find a solution
any help would be greatly appreciated

Categories

Resources