hi i am looking to downgrade the rom of my wizard from 3.08 to 2.26 or 2.24
please help
this way i can upgrade my pda to wm6 and FLo.
Thank you
Just flash the t-mobile official ROM and you'll end up with your IPL/SPL being 2.26. WM6 works with 3.08 though so you shouldn't need to downgrade your IPL/SPL anyway. You should always flash back to an official ROM before flashing a new ROM though.
However if your device is not unlocked yet, what you need is IPL/SPL 1.xx, not 2.xx. For that you need to flash Button's 1.05 ROM until both IPL and SPL downgraded, then use either lokiwiz02, WST or aWizard to unlock your wizard. Follow the guide at http://forum.xda-developers.com/showthread.php?t=285435
Related
Hi all. Tried and tried in vain, to replace the T-mobile splash screen, only to find out that the phone is CID locked.
Managed to upgrade to WM6 though, thanks to vlodeck and nocturne.op.15
Here's the phone details:
IPL: 2.06
SPL: 2.06.0000
GSM: 02.19.21
OS: 10.2.0.8 (WM6 by vlodeck & nocturne)
Oh, and also worth mentioning, my PC is running on Vista Ultimate, on which RUU's don't work. But some people said that if I install VMWare Virtual PC and install XP on that, RUU works through it.
So, how to unlock CID of this phone?
Wish I knew!
I'm in the same boat, so please can someone advise, thanks.
to cid unlock to need a ver. 1.xx of ipl/spl. And seeing you have 2.xx you cant really downgrade to ver.1.x
but can you told me whats rom have ispl ipl 1.x??
ok so saying you have ipl 1. what ever how do you cid unlock?
ftp://[email protected]/Up...er_1120223_11202110_11220_T-MobileUK_Ship.rar
will have ipl and spl ver 1. wherever you can get to install or not, might work with a noID ruu. then you can use lokiwiz2 to unlock the CID
There are rom versions that have 1.xx IPL and SPL but from my own experience I know, that once you upgraded to 2.xx or more, you cant get back to 1.xx. The most you can get is 1.xx IPL and 2.xx SPL.
Cheers,
vlodeck.
So, What ROM we must flash? To have 1.xx IPL and 2.xx SPL?
Maybe offtopic, but I have another question: If I have ROM from ERA GSM POLAND can I flash AKU3.3 TMobileUK ROM?
Charmer community is so small.... ;(
adexxx, you misunderstood me. You can't get 1.xx IPL and 1.xx SPL once you've already upgraded to 2.xx.
If it's an official ROM then you can flash it no problem. If its a custom ROM, use the tool I described in WM6 charmer thread.
When I tried to update with RUU: RUU_Charmer_38221_382127_026921_TMO_HR_WWE_Ship it showed error: INVALID VENDOR
What I'm doing wrong?
use wizard noID upgrade utility. it's some around here, maybe even in charmer forum.
OK, I flashed and it works fine.
Now I have 3.0 IPL&SPL, my 1st splash was changed.
[offtopic end]
Hi,
I have a sim unlocked MDA Vario (T-Mobile), but i want install any custom rom to it. I have followed this guide http://forum.xda-developers.com/showthread.php?t=298613 but instead lokiwiz i used the aWizard-V1_3beta2.zip. At the first step i downgraded my phone with Xda_MiniS_LaunchROM_v154102. I used the u function for the cid unlock after my device is restarted. But i cannot flash any rom into the device. I still get the 302 error. My device is still Cid locked? After the cid unlocking i got IPL 1.xx and SPL 2.xx after i reflashed with the buttopn 1.05 and the t-mobile 2.26 after i get the 302 message when i tried to flash a different brand rom. My original is IPL 2.26 / SPL 2.26 ROM is 2.26
Strange.... I compared the two dumps from two programs aWizard-V1_3beta2 / Lokiwizardb2 /lock_backup.bin before unlocking and cidunlocked.bin after unlocking/ is the same in the two programs. The question is? How possible the patched dump which is the lock_backup.bin is the same as the secondly patched lock_backup? The soft is not really pathcing?
What is wrong?
Thank You,
You're not CID unlocked yet. You need to flash and reflash the XDA_MiniS rom or the button ROM until both your IPL and SPL are 1.xx and then CID unlock your phone. Sometime it takes a few time (up to 7 times or more) to get both your IPL and SPL to 1.xx so be patient and keep reflashing until you are successful. Once you're successful, or think you are, download and run Wizard Service tools (google for it) and click on CID actions to verify that you are actually CID unlocked and then flash back to the t-mobile ROM. After that you should be able to flash any ROM you want.
Thanks... Your method is working great....
Can't Downgrad SPL 3.08
Tried 9 times now to flash the Button Rom to downgrade and I get the IPI to 1.05 (or 1.01) but the SPL is still stuck on 3.08. Any suggestions to download so I can unlock the CID?
thanks
Marcio
IPI 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2
Hi ... i have upgrading my wizard but i can't use lokiwiz beacuse he doesn't work .... and the only ROM i can flash is Xda_mini_S...ecc ecc ...
When i try to upgrade to WM6 (any rom) i have error at 99% ..upgrade error... 302 ...
What can i do ???
Any suggestion ....
Many Thanx
Skunknet
fTry to lash the 1.05 ROM again to download SPL3.08 to 1.05.
When I had flashed 3.08 before the other ROMs, I could not downgrade with any ROM other than the OEM ROMs. I had to use either the T-Mobile 2.26 ROM or AT&T 2.25 ROM to downgrade SPL/IPL to 2.2x and only then was I able to use a different ROM to further downgrade to 1.0x.
You'll have to downgrade to first IPL/SPL 2.xx and then to IPL/SPL 1.xx,therefore flash the TMO 2.26 or AT&T. Only in Ipl/Spl 1.xx lokiwiz will unlock.
Good Luck
i am trying to upgrade my wizard. i followed the instruction in the wiki section. i am at the step of cid unlock my phone. however, after i did the cid-unlock the IPL stays on 1.01 instead of 1.05 which is described by the tutorial.
what did i do wrong? btw i have a g3
No, you didn't do anything wrong
The ROM is Button's 1.05 ROM, which provide IPL and SPL 1.01.
Just unlock, upgrade IPL/SPL, then flash a WM6 ROM.
thanks, got the lastest TNT rom to run
I believe that my brother' Wizard is CID unlocked already, because I also flashed many WM5 into it. But few days ago I tried to flash the WM6.1 and now it is stuck at the 1st splash screen.
I have a lot experiences from flashing rom by Hermes, Atom, Herald, Kaiser… I have read and tried many time how to solve this problem but it did not work. The re-flashing progress was exellent with ’ CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE’, the screen still say as below:
IPL 1.01
SPL 3.08
GSM 01.12.01
OS 1.5.4.2
But any flash with other roms like T-Mobile 2.26 was stopped by connection or ID errors. The problem is how can I get the IPL/SPL back to 1.xx!
Appreciate any help!
Thanks!
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
bill_in_mtl said:
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
Click to expand...
Click to collapse
I know how to do it and did it many (10 ) times with custom rom but no good result. The IPL has been downgarded to 1.01 but SPL is still 3.08.
Anyway, thanks for your reply!
Sorry about that - was just trying to help
Check out the response from mestrini on the attached thread - he mentions something about the spl freezing if you downgrade from 3.xx to 1.xx
I was not aware of this info - and perhaps mestrini can give you some details on how to get around it - if that is the issue here.
http://forum.xda-developers.com/showthread.php?t=377038
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
zabardast_1 said:
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
Click to expand...
Click to collapse
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
nugift said:
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
Click to expand...
Click to collapse
If it had once got spl 2.26,you shud have tried to flash the button's a couple of more times to downgrade the spl to 1.xx,why again you upgraded to 3.08. Now I believe the SPL is locked at 3.08 and it requires more efforts to downgrade to 2.xx,the only way is to keep on flashing the tmo 2.26 some more times,if you are lucky,it might downgrade.Otherwise upgrade to 3.08 and keep using wm5 official stock Rom.
Cheers!