Related
I've been searching on every possible site I can find to no avail. help. So I wonder if anyones done this?
I run my Qtek 2020i with O2's firmware in Corp. mode now. But I miss the Today screen's Battery bar.
Does anyone know how to pull this though into the corp. mode? or install it from ripping file from the O2-Active side?
Any help or guides etc would be ever so useful.
Sym
I wanted just that bit too.
I spent a bit of time messing around with a Blue Angel Extended Rom and managed to find the o2Active installer CAB, Hacked it added the right DLL for the XDA2i and got it working, Unfortunately it does have the original setup DLL in there so asks for corporate or personal but it only adds the batteryinfo.dll and the today screen.
Well enough of that here it is enjoy
Riptos
Thanks riptos, your a star.
Thanks from me too.
Guys have you considered this little battery meter (single bar running across the top of the screen like Spb's version)... see attachment below...or one of its many variants (inc back up battery and/ or memory status) discussed under
Not as gucci graphics wise as the O2 one I grant you (see other attachment) but it takes up a lot less real estate for the same job.
The CAB download file is at:
http://forum.xda-developers.com/viewtopic.php?t=21699&postdays=0&postorder=asc&start=25
Cheers - Mallow1
riptos said:
I wanted just that bit too.
I spent a bit of time messing around with a Blue Angel Extended Rom and managed to find the o2Active installer CAB, Hacked it added the right DLL for the XDA2i and got it working, Unfortunately it does have the original setup DLL in there so asks for corporate or personal but it only adds the batteryinfo.dll and the today screen.
Well enough of that here it is enjoy
Riptos
Click to expand...
Click to collapse
Thanks riptos, I've been looking for this as well even though I have the T-Mobile MDA II. I don't know if it'll work or not, my original MDA II "Today" battery meter disappeared when I updated to ROM 1.72.00 GER.
Thanks here also Riptos,
I installed it in my XDA IIs and it is working just fine.
does this cabfile work for other countries apart yours?
in malta i use vodafone as service provider{ and also gomobile.......}
if i install this cab file will it then make the battery status appear on my today screen ?
or it has nothing to do with the service provider.............
You can install it no problem, it won't effect anything else, it will just put the battery bar on your today screen.
i've installed it and did the soft reset but i cannot see the bar!
i've got the spb pocket plus, would this cause some sort of clash?
UPDATE: i've uninstalled spb pocket plus and still no indicators on screen.
O2 Battery Bar
Try deselecting from today screen items and exit to today screen, then selecting from today screen items and exit. If it isnt in the list it wasn't installed properly.
Riptos
there is no batter bar in the today screen option... first thing i looked at!
got it to work... thanks alot buddy......
Regards
Many thanks for the OS Battery Plugin
Thanks riptos, your a star.
Webluxor.com web luxor (860)-865-0246
Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny
me too
i have been asking about this too the last day or so. the dopod rom has it built in but i am worried that once i have put the dopod rom on then i cant go back to the orange one if i dont want to keep the phone.
No one seems to be replying about dumping my original orange rom so at the mo we are a bit stuffed.
warnysouth said:
Hi Everyone,
I have a nice shiny orange spv m700. Unfortuantly, in Orange's wisdom they supply a ROM which does not have any form of thumb based text entry.
In order not to void my warranty I am not going to flash the ROM. Especially as I have tomtom 6 working perfectly and removed the orange garbage from the today screen.
However I am going mad withouth t9 text entry! I have downloaded and installed phonepad english, phonepad international, tengothumb and none of them work! They install fine but not come up when you select them. Ive tried setting them to default text entry but to no avail. I have installed them on the device not the memory card and there is lots of memory spare.
Can someone please help me has anyone found the trick? I have 7 days to return the phone but until i try phonepad i dont know whether i want to keep it (never used a phone withouth keyboard before).
Thanks in advance
Warny
Click to expand...
Click to collapse
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
It will work, u just need some hack
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi,
Great thank do I install this before or after phonepad?
Thanks
W
sunlip said:
Try install the attached cab, then goto program>G4 SIP Startup select phonepad as default SIP, then softreset. However TengoThumb would not work for Trinity for some reason.
Click to expand...
Click to collapse
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W
warnysouth said:
Hi,
Great thank do I install this before or after phonepad?
Thanks
W
Click to expand...
Click to collapse
Install phonepad, then G4 SIP tweak, then select phonepad as startup SIP in G4 SIP Tweak, soft-reset. It works for me.
warnysouth said:
Hi, it doesnt work for me. I install the cab you supplied on the device, did the setup and soft reset, still does the same thing (select phonepad in list and nothing happens)
any more ideas?
Thanks
W
Click to expand...
Click to collapse
WOOOOOOOOOOOOOOOOOOOOOOOOOHOOO PHONEPAD UP ON THE ORANGE! uninstall phonepad, install G4 tweak, install phonepad international, and bobs your uncle! THANK YOU VERY VERY VERY MUCH
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
Yeah I just did a fresh install of everthing and now it doesnt work again. Hmm it seems its not repeatable. yet.
Please can someone post links to the relevant files needed to do the above. Actually I see the G4 link above so just phonepad if poss.
Thanks
rjefferis said:
hurray
I had to try it a few times on mine and piss about with it but it is now working.
Thank god for that. We got there in the end.
Thanks guys.
Click to expand...
Click to collapse
How did you get it to work?
Cheers the G4 does the trick
thank you for the solution!! worked first time for me, installed the tweak then phone pad english and soft resetted. so glad to have phonepad back!
OK I got the G4 Sip program installed but the phonepad never works - just pops up the standard keyboard. I have a Orange M700 - any suggestions? Thanks
Uninstall both then install sip change, reinstall phone pad select phone pad as default and it should work...
Or if all else fails purchase SK tools as this always works and has many useful extra features.
Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol
Yet another hapless convert to smartphone
tattoo_gaz said:
Thanks for all the useful info
I got mine working on my SPV M700 by:
1) Uninstall SIP Change & Phone Pad & G4 SIP Tweak (If you have any of them installed already)
2) Copy G4 SIP Tweak CAB to PPC and install
3) Soft Reset
4) Copy Phone Pad CAB to PPC and install
5) Soft Reset
6) Copy SIP Change CAB to PPC and install
7) Soft Reset
8) Start SIP Change (From Start Menu - Programs) and select Phone Pad and make sure delay is set to 10
9) Soft Reset
This is the only way I have managed to get mine working, and I dare not reset the device again incase it fails lol
Click to expand...
Click to collapse
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening
Awesome, this has been plaguing me for a long time, whatever i did i could not get any keyboard except the standard ones to stick and be useable, fine with a stylus, no good for one handed operation.
Now it all works and like the rest its a case of remove anything resembling SIP management and alternate SIPs and then install G4 Tweak and then Phone Pad, select PhonePad in the G4 interface and soft reset. Bingo a working phone pad.
Phone Pad
inanimateman said:
Hi, hope this thread isn't dead just yet...as a newbie here and a recent convert to the world of the touch screen... I've had a good search around the web for a thumb entry system (have to admit thought is was a standard feature on smartphones cos I'd seen it working on an O2 XDAmini. So was more than a little dissappointed to find it wasn't on the M700 (after my 7 day's were up).
I've tried installing tengo thumb with the same limited success as a previous contributor, lots of resets I assume a soft reset is button on the bottom you prod with the stylus?
I've tried various combinations of loading G4 SIP Tweak, and Phone Pad cab, and have the 'Phone Pad appears in list but doesn't do anything' problem...
I noticed in your post you mentioned uninstalling 'SIP Change' that's some I've not downloaded separately, got the G4 SIP tweak and the phone pad.
Also there appears to be two places (3 including the input icon in settings) where you can select Phone Pad there's 'G4 SIP Hide' in the sytem menu where it say's don't choose the wrong SIP here as its likely to **** everything up. And then there's the 'G4 Sip Startup changer' in my programs directory. Are either of these the 'G4 SIP Tweak' utility.
So i'll give it another go but wondered if I've
1. got the right cab's, tweaks and whistles
2. got my SIP application confused
3. just plain confused
Any help greating appreciated.
Also must be trying too hard with the stylus as I'm on no. 2 already!
Thanks for listening
Click to expand...
Click to collapse
I was in a similar position to you. I managed to get mine working eventually - I found that I didn't need Sip Change. I just installed SIP Tweak, then Phone Pad. I think perhaps the key thing is to soft reset immediately after selecting Phone Pad on Tweak. Once I'd done that it finally worked, and has continued to work even after when I've shut down normally.
Would anyone be so kind and up me the original htc black windows theme... and maybe the wallpaper? because i have an o2 diamond and im trying to get the nice desing back...
Thanks
The original unbranded Manila ui can be found here: http://forum.xda-developers.com/showpost.php?p=2358935&postcount=225
There's a black theme on the FTP (ftp://xda:[email protected]/Uploads/Trinity/CABs/Black_Theme_LVSW.zip)
I don't think there is a way to get the default wallpaper out. I've been looking at manila all morning to have a look at the possibility of skinning it; and it's .. um .. hard lol
Thx.. we will give it a try
ok...that unbranded manila was exactly what i am using...
What i wanted was the original black theme... just the windows theme of the diamond... the .tsk file is what i need.
oooh ... thx! these two files in combination was exactly what i've been asking for a few days ago
during the installtion of the manila.cab my device was frozen, and the installationprogress was at 75 - 80% but after a soft reset and a restart of tf3d everything is in nice htc-black/greyish colours.
thnx!
busta.rhymes said:
ok...that unbranded manila was exactly what i am using...
What i wanted was the original black theme... just the windows theme of the diamond... the .tsk file is what i need.
Click to expand...
Click to collapse
The second link is the .tsk, no?
Hey guys,
I don´t quite get it. I have the blue o2 german TF3D ui too and i want to get rid of it.
Can I install that manila cab and I will get the original black HTC TF3D without a custom ROM?
Is it still in german then?
Is the colour of the taskbar changed too?
Is there any way to undo this completely?
Sorry for my questions, I just want to do this right!
Thanks in advance.
Thank u very much.. it worked...
but only the small start menu... the big one dosnt change...
Thx alot
horstborsch said:
Hey guys,
I don´t quite get it. I have the blue o2 german TF3D ui too and i want to get rid of it.
Can I install that manila cab and I will get the original black HTC TF3D without a custom ROM?
Is it still in german then?
Is the colour of the taskbar changed too?
Is there any way to undo this completely?
Sorry for my questions, I just want to do this right!
Thanks in advance.
Click to expand...
Click to collapse
Yes, it's without a custom rom (so it takes 20 mb of storage :/ ).
It is still german.
TF3D is nearly complete htc black then, only the connectionmanager stays "o2 like" blue und and as busta said, the big startmenu stays in the o2 blue ...
Yes i know only have this manila installed... I stoped the installation of the original one.. but know the Opera browser does not work in tf3d anymore...
Help thread here:
http://forum.xda-developers.com/showthread.php?t=404857
busta.rhymes said:
Yes i know only have this manila installed... I stoped the installation of the original one.. but know the Opera browser does not work in tf3d anymore...
Help thread here:
http://forum.xda-developers.com/showthread.php?t=404857
Click to expand...
Click to collapse
opera still works for me ....
@horstborsch
i think the only way to uninstall is to perform a hardreset ...
installation isn't listed in the uninstall programms list.
please correct me if i'm wrong!
thanks for your answers. these are too many disadvantages at once.
- missing black for some taskbars and windows
- no homezone symbol
- to save 20mb on RAM I have to stop installation of deafult apps after
a hard reset and maybe all mail, sms and operator settings are gone...
I would likely try this out but by doing a hard reset I loose all my configurations and installed apps. So I have to do a bunch of configurations and installations again and that would last a whole day.
or is there any way to save configurations and reinstall them after a hard reset?
There's some sort of post hard rest config app in the Development section of XDA, can't remember what is called though.
You could also try Sprite Backup. It's on HTC Club and on this forum in various places. It will backup your settings, PIM and files and allow you to restore after a reset.
I may have missed something, but why don't you try a custom ROM. It'll get rid of all of the O2 crap. Plus they have network configuration settings for your MMS and o2 mobile web.
I got an idea on the missing color change of the big taskbar.
SkTools allows you to change a whole bunch of colors for different elements such as ToolTips, Taskbars etc.
try this?!
...
Could anyone reupload Theme_LVSW.zip? I cannot get to FTP server.
is this what you mean?
Sorry I meant this one.
The first one was in response to an earlier request.
crashhead said:
Yes, it's without a custom rom (so it takes 20 mb of storage :/ ).
It is still german.
TF3D is nearly complete htc black then, only the connectionmanager stays "o2 like" blue und and as busta said, the big startmenu stays in the o2 blue ...
Click to expand...
Click to collapse
thanks, your answer helps a lot.
Hi,
Who can help me????
I just got my TD2 for less than 1 week and i keep having the following problem.
The bottom command bar change colour from orginal black to white as shown in the attached pic.
I do not know wat happen...
I had tried hard reset, the problem is solved.
But after 2 days, the white command bar comes back...
i do not know how to do now....
Is there anyone out there facing the same problem???
Am i the only unlucky one?
HELP!!!!!
have you tried resetting the theme?
Settings -> All Settings -> Personal Tab -> Today Icon -> Appearance Tab Select Windows Default -> Ok
then
Do the same again this time select "Htc black"
lilH
same problem to me
hard reset
hard reset will solve the problem. I installed a theme for TD 1 on my TD 2 and the display got very very weird. Hard reset did the trick ...
Try update the rom, you can find in htc web site...
SOLVED !!! it's all due to MapKing
I had solved the problem 1 month ago....
I want share my view...
at the time when i had this problem, i had MapKing installed...
after i remove MapKing, i dun have this problem anymore...
I think it could be due to MapKing, do u have Mapking as well???
Fatguy said:
I had solved the problem 1 month ago....
I want share my view...
at the time when i had this problem, i had MapKing installed...
after i remove MapKing, i dun have this problem anymore...
I think it could be due to MapKing, do u have Mapking as well???
Click to expand...
Click to collapse
Yupz...I remembered posting about this sometime back.
I guess you were using Mapking R12...
It puts into your START PROGRAMS option a program which allows SMS to be sent of your GPS location. Removing that program and softreset would clean the bug out.
There's an apparent conflict.
atan.ismail said:
Yupz...I remembered posting about this sometime back.
I guess you were using Mapking R12...
It puts into your START PROGRAMS option a program which allows SMS to be sent of your GPS location. Removing that program and softreset would clean the bug out.
There's an apparent conflict.
Click to expand...
Click to collapse
thanks for ur information ...
do u know what is the name of the program?
I would like to try again
Fatguy said:
thanks for ur information ...
do u know what is the name of the program?
I would like to try again
Click to expand...
Click to collapse
Its something with SMS in its name. It'll appear when you install MapKing R12.
Sorry, but I can't recall the name exactly.
georgeono said:
hard reset will solve the problem. I installed a theme for TD 1 on my TD 2 and the display got very very weird. Hard reset did the trick ...
Click to expand...
Click to collapse
The display from a TD1 is different from a TD2 !!!!!
TD1 is VGA TD2 is WVGA so themes are not interchangable.
yeah mapking is the culprit but u dont have to soft reset and yet u still can use mapking
just delete the mapking entry in the windows startup folder and soft reset..thats all =)
didn't matter. The problem was that TD 2 is 400x800 and TD 1 is smaller. No problems with VGA/WVGA. The theme worked, but worked as if the display was that of a TD 1 (the fact is hat I got a link from a TD2 thread to a TD1 and didn't notice. So I installed it without questioning ...)
Hi there!
After short time I've bought topaz, decided to install HDtweak (due to touchFLO in landscape) and G-config (for some apps in landscape), first days everthing was fine, but... For example:I wanna use calculator in landscape, so I rotate phone, in a second the calculator is in landscape, but in another second it disappears and i can see only home screen in standart vertical position... I thought, problem will dissappear with unistalling tweak and gconfig, but I was wrong... so i decided for hard restart, now i have nothning in my topaz, no tweak, no gconfig installed, but i have still the same problems with calc, album and opera...
Thanks a lot for your ideas and solutions!!!
that is strange
i think that somehow , on some level , something went wrong with the phone itself
i mean , if you did a hard reset i don;t think it's a software or a program problem
are you using the original rom or a modified one ?
shumo said:
that is strange
i think that somehow , on some level , something went wrong with the phone itself
i mean , if you did a hard reset i don;t think it's a software or a program problem
are you using the original rom or a modified one ?
Click to expand...
Click to collapse
yes, i'm using original rom...