plz help with this problem
i use TOFCLOCK HIMA WM6 AKU.0.7.0 Fresh
i installed some progz on my qtek 2020
and i restart my device the RAm Disk is gonne
it doesnt appear in file explorer or at memory setting
i reinstall the rom but the same problem
no Ram disk
plz help
hi i also have the same issue. just annoying for me as i dont really use it except for emails.... when it does appear its blank even if info was on there to begin with... anyone got any ideas. thx
Related
With wm6 i'have no more usb mass-storage funcionality!!
I've two programs and they says:
1) WM5torage: "Can't open the selected card/disk device"
2) Card Export: "Can't .... missing dlls or corrupted registry entries"
What can i do?
Anyone with this problem?
thanks!!!
wm5torage works for me. there may be some application (process) running from (or use) you're storage card.
NoOne who can help me?!?
Thanks!
I can't use WM5torage too,I think that is the software's problem.
I use ver. 1.6 and it works for me. try to use a newer ver. or a older one from yours.
WM5torage also works fine for me w\ crossbow.
running 1.73 without problems
JouSePo said:
running 1.76 without problems
Click to expand...
Click to collapse
Where's 1.76 version?
Can you upload here?
Many thanks!!
electrobose said:
Where's 1.76 version?
Can you upload here?
Many thanks!!
Click to expand...
Click to collapse
sorry 1.73
also i'm with 1.73 and pdaviet wm6 v2 but can't wotk, even card export....
i don't know what's th problem!!!
electrobose said:
also i'm with 1.73 and pdaviet wm6 v2 but can't wotk, even card export....
i don't know what's th problem!!!
Click to expand...
Click to collapse
I also 've the same problem>>>
i use the 2 programe but does't work to me
what i've to do>>?
Disable Programs Running on SD Card
I have to disable all of my today screen programs. They are installed on my SD card and WM5Storage won't run if they are enabled.
had you tried hard reseting already?
First start Wm5torage and switch to mass storage, then connect the USB!
When active sync is allready connected, i was not able to use Mass Storage and
Hi,
Does anyone have ever install GoogleMaps or TCPMP on the internal storage of the Diamond ?
Whenever I tried to install them on the internal storage, they keep install themself on the internal memory of the diamond.
I've look into the cab and I've notice that the path is %ProgramFiles% ....
Don't tell me that nobody ever tried to install TCPMP or GoogleMaps on their Internal Storage
It seems that none of my programs are installed on the internal storage indeed, even if I choosed that option at setup...
Ok, so it's not a "only my Diamond" issue
Maybe a "all Diamond" or "Orange Diamond" issue ...
I'm gonna test on my old Prophet tonight.
Interesting...just checked my install (supposedly to Internal Storage...) and its on the device!!!
googlemaps wont install on anything except the device memory, even if you tell it to do otherwise. this is a google issue, not a diamond one
I have copy them to the internal memory, and delete them from phone. Then I make new shortcuts and I have place them to windows\start menu\programs.
darthbane2k said:
googlemaps wont install on anything except the device memory, even if you tell it to do otherwise. this is a google issue, not a diamond one
Click to expand...
Click to collapse
Glad to hear that
So it's the same problem with TCPMP
You need a special vers of TCPMP for WM6.1 search the forum for it.
guys,,
where i can get GOOGLE MAPS software ?
cz there's no that software on my Touch'D ..
anybody can help me ?!! please...
thanks.
Dolinas said:
You need a special vers of TCPMP for WM6.1 search the forum for it.
Click to expand...
Click to collapse
I got "this special version" and installed it already ... but check by yourself, it's installed in the phone memory
hey there...
i have a question about the RAm of the htc wizard?
i just habe about 3 mb of ram left when i sarted the device...
is there any option to upgrade the ram or use a part of the sd card for more ram?
i have a htc wizard with the diamond rom with windows 6.1 professional.
it has 47 mb ram
and i have an 2 gb sd card if theat helps...
thanks for answers...
english is not my first langauge so i couldnt read everthing what is already in other treads...xD
thanks for help...
So im mexican....
the-nj said:
hey there...
i have a question about the RAm of the htc wizard?
i just habe about 3 mb of ram left when i sarted the device...
is there any option to upgrade the ram or use a part of the sd card for more ram?
i have a htc wizard with the diamond rom with windows 6.1 professional.
it has 47 mb ram
and i have an 2 gb sd card if theat helps...
thanks for answers...
english is not my first langauge so i couldnt read everthing what is already in other treads...xD
thanks for help...
Click to expand...
Click to collapse
I speak spanish...
But it isnt normal so try again to reflash the original rom then this again this is no normal....
You can see if the Lnks to Programs are double... and notify me please.
hey...
sorry im not sure what you mean?
so all programms are listened just once in programs...
and when i calculate all processes toghether its just 14 mb...but it says that i have just 4 mb left?
do i need to flash rom then again?
and do you know a good tool that i dont loos the data?
because im not at home so i cannt loose the whole data?
You should install a task manager utility which closes programs when you click 'X' instead of minimizes them. One of the task manager is wkTask, or you may install htc Task Manager.
If you only have a little RAM when you started the device, uninstall those cosmetic things such as M2D, touchFLO, SPB things as they suck up memory a lot.
ok...thanks i changed the settings...in the htc task manager you can either close or minimize the programs...
and i deleted mobile shell that was a big thing...
and do you know any other wayz of getting the wizard faster?
Hi ,who can help me? i have a problems with my SD card, my himalaya used WM6.5.i installed SDHC driver for 4Gb sd card or Up ,becuase it can know only 2Gb.But after this installation my device changed to unknow all SD card.So i want to remove this programes but its say ERROR with this, i dont know why?
who can help for this problems?
psophan said:
Hi ,who can help me? i have a problems with my SD card, my himalaya used WM6.5.i installed SDHC driver for 4Gb sd card or Up ,becuase it can know only 2Gb.But after this installation my device changed to unknow all SD card.So i want to remove this programes but its say ERROR with this, i dont know why?
who can help for this problems?
Click to expand...
Click to collapse
The reason for your problems is: The Hima can not and never will handle SDHC-SDcards!!! Well, I guess, you have to hard reset your device. But remember to backup your data first
Big thank for reply
muckelmaus said:
The reason for your problems is: The Hima can not andnever will handle SDHC-SDcards!!! Well, I guess, you have to hard reset your device. But remember to backup your data first
Click to expand...
Click to collapse
thank alot for your reply , can u tell me how to hard reset of Himalaya WM6.5
I know how for 2003se(power n reset botton) but 6.5 i dont know ?i tried any way but cant, pl tell
for way with Himalaya WM 6.5 hard reset
Now you have to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.
Big thank againe
muckelmaus said:
Now you have to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.
Click to expand...
Click to collapse
Very big thank againe for your help
wish you have good luck everytime and everywhere
no hard reset needed
psophan said:
Hi ,who can help me? i have a problems with my SD card, my himalaya used WM6.5.i installed SDHC driver for 4Gb sd card or Up ,becuase it can know only 2Gb.But after this installation my device changed to unknow all SD card.So i want to remove this programes but its say ERROR with this, i dont know why?
who can help for this problems?
Click to expand...
Click to collapse
I've got that problem months ago . .
just uninstall the sdhc software and soft reset, that's it . .
if it's stuck in error, go to windows folder than start up and delete the "sdhc start up" first, soft reset, then uninstall it . .
and now my hima just only use the generic 2 GB Micro SD card (insert with the bridge)
now back to use 2003se
ok ill try with your telling,thank .But now i backed to use 2003se because im not yet to fix that problem with SD card.
Im also try any rom for finding good rom ,because some rom that i tried are error as slow, unkown SD card, unknow camera button.If i find good news with
ROM that i upgraded i ll tell you next.
So I updated my phone from wp8.1 to windows 10 withh language packs installed and customPFD applied........ but after updating my phone the storage check is showing only whatsapp installed on phone memory but the phone memory shows 1.02GB of space used for apps+games so can anyone plz help caz now i'm lacking space in my internal memory
souma_rox said:
So I updated my phone from wp8.1 to windows 10 withh language packs installed and customPFD applied........ but after updating my phone the storage check is showing only whatsapp installed on phone memory but the phone memory shows 1.02GB of space used for apps+games so can anyone plz help caz now i'm lacking space in my internal memory
Click to expand...
Click to collapse
Hello,in primis make a backup of our data then, if you want I repeat if you want (there's no danger in do it) try an hard reset (settings=>info=>restores your phone).
if you tell me what your phone it is, there is a way to do the hard reset with button combination when the phone is off. I say to you to do an hard reset because tech prew is instable and when the os try to migrate the data between old and new version some errors can be incurring. after the hard reset you can restore your data with backup ( you must configure your phone as brand new)
that's all.
ciao!!
hit thanks if i have helped you.
sorry for my english!