Unknow SD card - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

Hi ,who can help me? i have a problems with my SD card, my himalaya used WM6.5.i installed SDHC driver for 4Gb sd card or Up ,becuase it can know only 2Gb.But after this installation my device changed to unknow all SD card.So i want to remove this programes but its say ERROR with this, i dont know why?
who can help for this problems?

psophan said:
Hi ,who can help me? i have a problems with my SD card, my himalaya used WM6.5.i installed SDHC driver for 4Gb sd card or Up ,becuase it can know only 2Gb.But after this installation my device changed to unknow all SD card.So i want to remove this programes but its say ERROR with this, i dont know why?
who can help for this problems?
Click to expand...
Click to collapse
The reason for your problems is: The Hima can not and never will handle SDHC-SDcards!!! Well, I guess, you have to hard reset your device. But remember to backup your data first

Big thank for reply
muckelmaus said:
The reason for your problems is: The Hima can not andnever will handle SDHC-SDcards!!! Well, I guess, you have to hard reset your device. But remember to backup your data first
Click to expand...
Click to collapse
thank alot for your reply , can u tell me how to hard reset of Himalaya WM6.5
I know how for 2003se(power n reset botton) but 6.5 i dont know ?i tried any way but cant, pl tell
for way with Himalaya WM 6.5 hard reset

Now you have to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.

Big thank againe
muckelmaus said:
Now you have to hardreset your device :
Press Reset Button and hold down Camera Button + Record Button.
Hold them pressed until the "Boot Options" menu appears on the screen.
Click to expand...
Click to collapse
Very big thank againe for your help
wish you have good luck everytime and everywhere

no hard reset needed
psophan said:
Hi ,who can help me? i have a problems with my SD card, my himalaya used WM6.5.i installed SDHC driver for 4Gb sd card or Up ,becuase it can know only 2Gb.But after this installation my device changed to unknow all SD card.So i want to remove this programes but its say ERROR with this, i dont know why?
who can help for this problems?
Click to expand...
Click to collapse
I've got that problem months ago . .
just uninstall the sdhc software and soft reset, that's it . .
if it's stuck in error, go to windows folder than start up and delete the "sdhc start up" first, soft reset, then uninstall it . .
and now my hima just only use the generic 2 GB Micro SD card (insert with the bridge)

now back to use 2003se
ok ill try with your telling,thank .But now i backed to use 2003se because im not yet to fix that problem with SD card.
Im also try any rom for finding good rom ,because some rom that i tried are error as slow, unkown SD card, unknow camera button.If i find good news with
ROM that i upgraded i ll tell you next.

Related

I cannot see my Sd card anymore after wizBackup!!

Hey Button...
How are you doing?
Well I got this Qtek 9100 few days ago and I tried to first backup my rom in my mini Sd card using your util wizBackup before using the newest room you made.
But the thing is I cannot see the mini Sd from the explorer anymore....
What should I do to see it again?
By the way do you know how to solve this activesync problem? I had to enable the IP settings for the PocketPc connection in order to make it work (despite of some windows error msgs after the connection), but then if I disconect and reconect again it will not work anymore.
Sorry by the length.
Thanks in advance
What should I do to see it again?
Click to expand...
Click to collapse
Now you should format SD card :wink:
searching for wizBackup
I'm going to upgrade my ROM to the new one provided by Orange Entreprise.
I search for wizBackup, but didn't find it. Can anyone upload wizBackup or similar software and give me the URL please?
thanx,
Sina
Hi All!
I have the same problem: after using wizBackup I cannot see the mini SD anymore.
Formatting is impossible because card is not recognized by none of the programs which I try (ie: Pocket Mechanic, flash format...)
But I'v noticed when I insert or remove SD my QTEK is waking up but still card is not recognized properly :/
Any suggestions and help?
(sorry for my English)
Make mini SD visible again after using Wizbackup Tool!!
I had the same problem after the back up...
No tools that could make my SD card visible again, until I found this little tool!!!
With this tool you can use your Wizard like a USB memory stick and then you can format it again with your desktop Windows.
Just install and connect the Wizard with the USB and format!!!
Good luck!
Wow!!!
THX a lot Marvie. Your solution is working!
I know WM Storage, but not this way
Everything is ok now, thanks once more.
If You came to Warsaw/Poland - let me know, I own You a few beers
This method didn't work with my card but I've found better solution - just insert your card to SD adapter and then to photocamera and format it from this device. Works 100%

Wizard won't boot up

My father get a wizard from somewhere, and he wants to revive it. I think theres a lot topic describes how to do it, but I don't have time for this yet, and my father read all the forum, but he says he didn't found the answer, so please post a link if someone has the solution.
The problem is:
When I start my device it stucks at the boot screen. If I try to Hard Reset it (comm+voice+reset), it says FAT format faliure. If I try to do a rom upgrade on it, it upgrades succesfuly, with no problems, but still wont pass the splash screen.
Please help my father
HyperMalac said:
My father get a wizard from somewhere, and he wants to revive it. I think theres a lot topic describes how to do it, but I don't have time for this yet, and my father read all the forum, but he says he didn't found the answer, so please post a link if someone has the solution.
The problem is:
When I start my device it stucks at the boot screen. If I try to Hard Reset it (comm+voice+reset), it says FAT format faliure. If I try to do a rom upgrade on it, it upgrades succesfuly, with no problems, but still wont pass the splash screen.
Please help my father
Click to expand...
Click to collapse
I have the same problem
You need to create an SD image backup and restore it from the image. Goodluck. I'll try to search the forum for the link..
Here is the link..Goodluck!
http://forum.xda-developers.com/showthread.php?t=276963
clemsyn said:
Here is the link..Goodluck!
http://forum.xda-developers.com/showthread.php?t=276963
Click to expand...
Click to collapse
Thanks, now it is working!!! the only problem remains are now with my miniSD card. I use a 2GB new that I get and was the main reason that I hard-reseted my device and did a mistake with it. Now I insert the miniSD card and my device dont read it or dont ... i dont know what. It just dont apear any storage card on my device. What can I do? I dont have a Card reader on my PC.
Rafase282 said:
Thanks, now it is working!!! the only problem remains are now with my miniSD card. I use a 2GB new that I get and was the main reason that I hard-reseted my device and did a mistake with it. Now I insert the miniSD card and my device dont read it or dont ... i dont know what. It just dont apear any storage card on my device. What can I do? I dont have a Card reader on my PC.
Click to expand...
Click to collapse
Use a digital camera or Media reader for your PC to format the miniSD Card.
kyphur said:
Use a digital camera or Media reader for your PC to format the miniSD Card.
Click to expand...
Click to collapse
This is the only way you will be able to do it as when you a a SD card dump it is raw so makes it so the card can not be read by anything till it has been formated!!!
you need to format your minisd, either through and SD card reader or camera. Goodluck! At least you got you wizard going.

SDHC..Try this one Guyz (Link updated 17-12-2007)

EDIT : - 17th December 2007
Try this Guyz :-
How to:
1. Download this file : http://rapidshare.com/files/77211814/SDHC_Driver.cab
2. Make sure your device is running WM6
3. Save the file to a folder (example: My Documents) to your device and NOT your memory card.
4. Remove the current memory card from your device.
5. Switch on your device and look for the saved .cab file using File explorer, then run it.
6. Format your SDHC card using a PC or laptop with FAT32 file system.
7. Now insert your SDHC card your device...
youre done!
----------------------------------------------------------------------------------
Please try this one guyz..
http://rapidshare.com/files/76471143/SDHC4WM5.zip
PLEASE WRITE YOUR REVIEWS AFTER DOWNLOADING THE DRIVER
you are still have strong spirit to try SDHC card
Yup..even though i dnt have a SDHC card.but im planning on buying it
Not working
Not working for me. Besides, all those SDHC posts contain drivers that are different then on my Hima. The cab contains SDMemory.dll and SDBus.dll while my original drivers are SDMemory.dll and SDBusDriver.dll.
I adapted my registry to correct this difference, but that didn't help. No more Storage Card at all.
My guess is that it is not for normal SD but for micro SD, hence the different bus drivers.
For the record: I'm using the 7.0c of c_shekhar.
New link is also not working. Again not even after changing registry.
hmmmm....well lets see if some one else also comments abt it..
rvdrijt said:
New link is also not working. Again not even after changing registry.
Click to expand...
Click to collapse
IMHO changing the file names would be a better way to try than changing registry.
@rvdrijt
Did u follow the instructions written at top
Yes. And then I had no more Storage Card link.
So then I tried hacking my reg, also without good results.
@Maggy
I've tried that before, but I could not remove the old SDBusDriver.dll. That's why I tried changing the reg. Any idea on how to remove the old one and then rename the new?
this might sound like a noob question,
over the universal forum they've figured out a working driver that supports at least an 8GB SDHC and I've tested it myself with a PQI 8GB and it works,
so I was just wondering if we can import that driver out to himalaya and make it work because from my understanding SDHC support is not based on the hardware rather than driver update for the device, and since it's been made for both WM5 and WM6/6.1 over there so technically it should work for our WM6 himalaya too, no?
just my 2 cents.
thanks..but the drivers are not the same..any way if you can attach the file maybe i will take a look..all the drivers i have tested just remove your atm functioning SD cards drivers also
This should be the latest SD driver that was used in Ranju's WM6.1 ROM,
but in case it's different, you might wanna take a look at the cooked ROM yourself as I'm not experienced with that.
Ranju's WM6.1 ROM:
http://forum.xda-developers.com/showthread.php?t=367448
Hi Gurus
I have FXXXXed my xda2 by trying installing sdhc drivers , now forget about sdhc blody normal sd card not working as well ( I should have read those forum about it first)
now the question is how can i get my old normal sd card working on my xda2
Please help
hardreset should help.
Worked for me when i did some driverexperiments
cu
HI thanx for replying
but i can't do hard reset as my camera button is broken from motherboard
and the traditional way (powerbutton + reset) is not working, the only way was to press record + camera + reset, i do have xpshut program thats not hardresetting as well
is there any other way to do hard reset i mean programmcally or any other means
or jst replace the sd drivers
plz help
I think sk-tools can do a hard reset by software, maybe memmaid to, I don't know it exactly. But sk-tools I´m sure.
hi any free tool
plz
Even if sktool is unregistered, this function isn't restricted, as I remember.
Hi thanx
yeah thast right just need to highlight at the beggning for hardreset
so i did hardreset
now problem not gone away no sd card at all
so now what should i do
while hardreset push Camera and Recordbutten to get the early Bootmenu.
With Recordbutten you can select the Item and with Camerabutton you change status.
It should set to
NO
YES
YES
then push the Navbutton in some Direction.
This should erase all usersettings
cu

*** Flash X1 without PC - Micro SD Method ***

This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
This method works for any 6.1 and 6.5, and even radio rom.
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction
Thx, always using this system.
Sticky
Sticked this one!
Edit By Badwolve1: Unstickyed due to lack of posting, but reference in the X1 Thread (Here)
I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?
inuka said:
I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
http://wiki.xda-developers.com/index.php?pagename=HardSPL
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
I've got the same proplem. Any suggestion?
Thanks!
I've got it working now, just d/l all the files here and follow the instructions
http://forum.xda-developers.com/showthread.php?p=2906948
Cheers!
jackleung said:
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
Click to expand...
Click to collapse
How do you format the micro-sd, can we use the card slot provided in laptops, becoause no adapter comes with the set
songao said:
I've got the same proplem. Any suggestion?
Thanks!
Click to expand...
Click to collapse
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.
hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
xmoo said:
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.
Click to expand...
Click to collapse
I also got the same problem when using the rom from this thread http://forum.xda-developers.com/showpost.php?p=2392404&postcount=1 but the flash of microSD method ran pretty well with this http://forum.xda-developers.com/showthread.php?t=431218&page=6
Does the device automatically reboot after it's installed? I just used this method and the device currently says:
'KOVSIMG.nbh - OK
OS - OK
Update Complete
UPDATE SUCESS'
It hasn't done anything since.
spr33 you take the battery out, put it back in and switch on
I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it
blackax said:
I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it
Click to expand...
Click to collapse
I was having the same problem as you, I tried everything finally I just used the kovsky RUU and used the pc update tool with it. it worked great. just make sure you take your sd card out before you do it or it will keep trying to search the card and say no image.
Problem X1 rom chang on english
I can't change rom on my X1 i have formated card on FAT32 my file name is ruu_signed.nbh i chnge the name on "Kovsimg.nbh" my device is set to tri color bar and on the screen i have Loading... and nothing else
can you help me ????
It works, I'm free and thank you
After weeks and weeks aof reading, reading, reading, making copious notes so that I had the process sorted from start to finish, I decided to bite the bullet tonight, yes, New Years Eve (well it is my new X1 after all ).
OliNex Hard SPL worked a charm, then during the micro SD method, the dreaded "no image file" message appears. RATS!
Numerous FAT32 processes, different ROMS and still the same message.
Tried the cable version using RUU and viola, I now sport the fantastic Touch IT v2.2 and NO VODAFONE
I would like to thank the more senior members for their cutting comments to witless noobs that made me read, search and read again.
Also to itje for his great ROM - have only just had a cursory scan so far as only just finihsed synch, and running like a dream. Donation certainly coming your way!
HAPPY NEW YEAR ONE AND ALL at XDA Developers from a very happy revitalised X1 owner!
ROM replacement
Moved original message to correct thread ...http://forum.xda-developers.com/showthread.php?t=445818&page=42
Has anyone more of an idea why the SD card method is causing so many to come up with the "No image file" message" ?
The USB version works for me, just would like to know the reason for error message - in case need to use it one day
BIG QUESTION:
Why some people can't flash from microSD card ??
I had the same issue
After a lot of trial and error, testing and testing, I arrived to this conclusion:
IMPOSSIBLE TO FLASH WITH microSD METHOD
(Nothing happens, "serial" message or "No image found" message popped up)
a) When I used an incorrect format (other than FAT32) on any brand card
b) With two Kingston cards properly formatted
I have successfuly flashed my X1 with unbranded cards and sandisk cards,
but after many attempts and format variants I NEVER achieved a successful flashing with kingston cards
Interesting...
Hi guys! i tried 2 flash my x1 ending in f***d up device.
I did the following:
1) running the hard_spl. The flashing started and at about 50% it stopped went back to the stripes screen telling me file not found...serial....all the things you guys described in the forum.
2) I created a card with a Kovsimg.nbh and restarted the device. Result was the same: File not found!!! but i did all like in the tutorial.
3) I tried again with hard_spl: First I got an Error 282 then 262. The device changes from stripes to grey screen the bar shows 0% ......thats all.
any suggestions??????????????????

[Q] SenseDroid Build Wont start to the "press Volume Down"

Hey Guys,
i have a problem with installing the SenseDroid Build by jerrytan93 . it says i need to start the Haret.exe , which i do. but the start up never come to the point, that i need to press down the volume button to enter the CWM. what am i suppose to do?
Edit:
The Haret always stops saying: cant mount SD Card. Cant countinue. Tried to format SD Card again and new Partitions. Nothing happend... Another Build isnt working for me either.
Thanks anyway
Joschilly
by the way, i do have the xperia X1, so dont get it, why it wont work. reseted my phone several times by now
I think your problem is in sd card partitioning!!
You must first create a fat32 partition, then the others!!
The message "press down the volume button to enter the CWM" will be appeared about 10 seconds after you run Haret. So keep your eyes on the screen.. If you dont press the volume down, booting will continues automaticaly and then fail.
attisa said:
I think your problem is in sd card partitioning!!
You must first create a fat32 partition, then the others!!
Click to expand...
Click to collapse
ahh ok, i didnt do that. so that might be the problem. will try it soon. thanks for the help! but when do i change the partitions again?
joschilly said:
ahh ok, i didnt do that. so that might be the problem. will try it soon. thanks for the help! but when do i change the partitions again?
Click to expand...
Click to collapse
Before start installing android that Jerrytan gave, You need to make partition on your SD card to 4 parts. one fat32, and the others ext3. After done, just follow the intruction..

Categories

Resources