EDIT : - 17th December 2007
Try this Guyz :-
How to:
1. Download this file : http://rapidshare.com/files/77211814/SDHC_Driver.cab
2. Make sure your device is running WM6
3. Save the file to a folder (example: My Documents) to your device and NOT your memory card.
4. Remove the current memory card from your device.
5. Switch on your device and look for the saved .cab file using File explorer, then run it.
6. Format your SDHC card using a PC or laptop with FAT32 file system.
7. Now insert your SDHC card your device...
youre done!
----------------------------------------------------------------------------------
Please try this one guyz..
http://rapidshare.com/files/76471143/SDHC4WM5.zip
PLEASE WRITE YOUR REVIEWS AFTER DOWNLOADING THE DRIVER
you are still have strong spirit to try SDHC card
Yup..even though i dnt have a SDHC card.but im planning on buying it
Not working
Not working for me. Besides, all those SDHC posts contain drivers that are different then on my Hima. The cab contains SDMemory.dll and SDBus.dll while my original drivers are SDMemory.dll and SDBusDriver.dll.
I adapted my registry to correct this difference, but that didn't help. No more Storage Card at all.
My guess is that it is not for normal SD but for micro SD, hence the different bus drivers.
For the record: I'm using the 7.0c of c_shekhar.
New link is also not working. Again not even after changing registry.
hmmmm....well lets see if some one else also comments abt it..
rvdrijt said:
New link is also not working. Again not even after changing registry.
Click to expand...
Click to collapse
IMHO changing the file names would be a better way to try than changing registry.
@rvdrijt
Did u follow the instructions written at top
Yes. And then I had no more Storage Card link.
So then I tried hacking my reg, also without good results.
@Maggy
I've tried that before, but I could not remove the old SDBusDriver.dll. That's why I tried changing the reg. Any idea on how to remove the old one and then rename the new?
this might sound like a noob question,
over the universal forum they've figured out a working driver that supports at least an 8GB SDHC and I've tested it myself with a PQI 8GB and it works,
so I was just wondering if we can import that driver out to himalaya and make it work because from my understanding SDHC support is not based on the hardware rather than driver update for the device, and since it's been made for both WM5 and WM6/6.1 over there so technically it should work for our WM6 himalaya too, no?
just my 2 cents.
thanks..but the drivers are not the same..any way if you can attach the file maybe i will take a look..all the drivers i have tested just remove your atm functioning SD cards drivers also
This should be the latest SD driver that was used in Ranju's WM6.1 ROM,
but in case it's different, you might wanna take a look at the cooked ROM yourself as I'm not experienced with that.
Ranju's WM6.1 ROM:
http://forum.xda-developers.com/showthread.php?t=367448
Hi Gurus
I have FXXXXed my xda2 by trying installing sdhc drivers , now forget about sdhc blody normal sd card not working as well ( I should have read those forum about it first)
now the question is how can i get my old normal sd card working on my xda2
Please help
hardreset should help.
Worked for me when i did some driverexperiments
cu
HI thanx for replying
but i can't do hard reset as my camera button is broken from motherboard
and the traditional way (powerbutton + reset) is not working, the only way was to press record + camera + reset, i do have xpshut program thats not hardresetting as well
is there any other way to do hard reset i mean programmcally or any other means
or jst replace the sd drivers
plz help
I think sk-tools can do a hard reset by software, maybe memmaid to, I don't know it exactly. But sk-tools I´m sure.
hi any free tool
plz
Even if sktool is unregistered, this function isn't restricted, as I remember.
Hi thanx
yeah thast right just need to highlight at the beggning for hardreset
so i did hardreset
now problem not gone away no sd card at all
so now what should i do
while hardreset push Camera and Recordbutten to get the early Bootmenu.
With Recordbutten you can select the Item and with Camerabutton you change status.
It should set to
NO
YES
YES
then push the Navbutton in some Direction.
This should erase all usersettings
cu
Related
Hey Button...
How are you doing?
Well I got this Qtek 9100 few days ago and I tried to first backup my rom in my mini Sd card using your util wizBackup before using the newest room you made.
But the thing is I cannot see the mini Sd from the explorer anymore....
What should I do to see it again?
By the way do you know how to solve this activesync problem? I had to enable the IP settings for the PocketPc connection in order to make it work (despite of some windows error msgs after the connection), but then if I disconect and reconect again it will not work anymore.
Sorry by the length.
Thanks in advance
What should I do to see it again?
Click to expand...
Click to collapse
Now you should format SD card :wink:
searching for wizBackup
I'm going to upgrade my ROM to the new one provided by Orange Entreprise.
I search for wizBackup, but didn't find it. Can anyone upload wizBackup or similar software and give me the URL please?
thanx,
Sina
Hi All!
I have the same problem: after using wizBackup I cannot see the mini SD anymore.
Formatting is impossible because card is not recognized by none of the programs which I try (ie: Pocket Mechanic, flash format...)
But I'v noticed when I insert or remove SD my QTEK is waking up but still card is not recognized properly :/
Any suggestions and help?
(sorry for my English)
Make mini SD visible again after using Wizbackup Tool!!
I had the same problem after the back up...
No tools that could make my SD card visible again, until I found this little tool!!!
With this tool you can use your Wizard like a USB memory stick and then you can format it again with your desktop Windows.
Just install and connect the Wizard with the USB and format!!!
Good luck!
Wow!!!
THX a lot Marvie. Your solution is working!
I know WM Storage, but not this way
Everything is ok now, thanks once more.
If You came to Warsaw/Poland - let me know, I own You a few beers
This method didn't work with my card but I've found better solution - just insert your card to SD adapter and then to photocamera and format it from this device. Works 100%
I successfully upgraded from WM2003 to WM2005 some months ago. I'd now like to upgrade again to TuMa 1.3. Currently my existing rom is 5.03.02 and it crashes quite regularly - especially if people call me.
Anyway, I've been reading through the wiki and a lot of the threads again but there's one thing I can't seem to understand. It seems as if upgrading requires an SD card? Is this the case?
Now, before I'm accused of not reading the documentation, I have and it quite clearly states, "copy the EXTROM folder to your storage card". That's fine and well but I've never had an SD card so how did I manage the first upgrade?
What I've been trying to find out (with little success) is if "storage card" is like the ROM storage area but before I flash my SPV M2000 into a very expensive paperweight I thought I'd better check. Better safe than sorry I guess.
Can someone confirm?
no sd card
i've got a spv m2000 and no sd card but i've managed to upgrade to tuma 1.3 no problem i just copied the extrom to the storage on the phone got less storage now but still works fine
Re: no sd card
jonni1980 said:
i've got a spv m2000 and no sd card but i've managed to upgrade to tuma 1.3 no problem i just copied the extrom to the storage on the phone got less storage now but still works fine
Click to expand...
Click to collapse
Do you remember where you copied it to? Was it the root directory or just in My Documents?
My worry is I'll copy it somewhere that the install program won't be looking. In the documentation it explicitly states "storage card/EXTROM". It'd be just my luck to copy to the files to the root of my device - try to flash it and having it fail because it couldn't find the image files.
You seriously don't have an SD Card?!
Go to a store, buy a 128 MB one for nearly nothing. Honestly, I can't imagine running a Windows Mobile device without one, especially Windows Mobile 5. There just isn't enough space natively in the device.
You don't technically NEED anything in the EXTROM folder either. Alternatively, you can just take all of its contents (cab files) and put them on your device using activesync, and run them in File Explorer to install them. It's the same thing, just not automatic.
TheLastOne said:
You seriously don't have an SD Card?!
Go to a store, buy a 128 MB one for nearly nothing. Honestly, I can't imagine running a Windows Mobile device without one, especially Windows Mobile 5. There just isn't enough space natively in the device.
You don't technically NEED anything in the EXTROM folder either. Alternatively, you can just take all of its contents (cab files) and put them on your device using activesync, and run them in File Explorer to install them. It's the same thing, just not automatic.
Click to expand...
Click to collapse
I've not had the need to use much memory on the phone really.
When I had an iPAQ I needed loads of memory and was always using it everywhere but I've found the SPV to be very slow (hopefully improved with the new ROM) and also the headphone socket is proprietary so I can't use headphones that fit my ears that don't fall out.
As well as this, I no longer use Windows - well I use my gf's laptop to flash the phone but that's about it. There's very little integration with Unix and the SPV and it's led to a dramatic reduction of usage.
I've heard of some programs that can sync with Evolution on Unix but they're very unstable at the moment and require quite some understanding to get working and I don't have the time to get that working just yet - maybe in a few weeks time.
I've already ordered an SD card but was just a little excited about the prospect of flashing the ROM (it's like Christmas morning for me!) and was wondering if I could do it without it.
Anyway, running the cabs one by one sounds like a solution for the time being. I thought it needed to replace parts of the sub-system that needed a hard reset no?
Once the ROM is flashed, will Device Information reflect the ROM Version as WM5 5.1.1700?
There is no problem to flash this rom without SD card, because you can install manually every cab from extrom after flashing
xplode said:
There is no problem to flash this rom without SD card, because you can install manually every cab from extrom after flashing
Click to expand...
Click to collapse
Thanks xplode.
I've worked out that the cabs are completely independent of the ROM update and as such don't even need to be on the device.
I thought they were like install files and needed to be present after reboot for the flashing to complete properly. My mistake.
After testing new custom ROM phone fall into eternal sleep.
how to resurrect?
card reader aslo in eternal sleeping : )
Mind sharing what ROM you used, so others wont make the same mistake?
Regarding your question, i've got no clue.
Maybe one of the guru's comes along to help you with your problem.
Can you get to the tri color screen?
Oh, yeah, thnx for response : )
But 3color screen appeared : )
So i download XPERIA Update ROM Utility, put *.nbh in that dir and run it.
After 3 next pressings it start to flash.
Better then from SD card because automatical reboot present : )
Mind telling us WHAT rom you used?
Barachiel said:
Mind telling us WHAT rom you used?
Click to expand...
Click to collapse
i think it might of been a custom rom that he was developing and testing - not one he downloaded. roms get tested pretty well before being released so nothing like this happens to regular users.
My own custom ROM. I trying to make it extra lite.
Now it about 84Mb instead of 160.
I still can't understand, why it freezed at once after SEMC1904.GIF, but now i make more testing levels between cleaning operations.... : ) ) )
Ethermind said:
My own custom ROM. I trying to make it extra lite.
Now it about 84Mb instead of 160.
I still can't understand, why it freezed at once after SEMC1904.GIF, but now i make more testing levels between cleaning operations.... : ) ) )
Click to expand...
Click to collapse
Could be a "xip" problem when not showing up the windows mobile screen. But good to hear it's working again
How to flash without microSD?
Hi,
I've started reading the forum about a week ago and some tutorials mention a way of flashing by pc, without microSD, but most of the howtos are only for the microSD method.
KovskyKitchen has an option, like "flash a rom", but i don't want to try it without any howtos, tutorials or docs.
Help me out with some links, please.
Thanks,
taarzaan
Hello
I have problem with my microsd.
I can not format - Windows was unable to format the card
My card: Sandisk 8GB SDHC
The system detects its RAW file format, and the capacity of 32 MB - lol
Someone knows how to solve this problem?
liptonace said:
Hello
I have problem with my microsd.
I can not format - Windows was unable to format the card
My card: Sandisk 8GB SDHC
The system detects its RAW file format, and the capacity of 32 MB - lol
Someone knows how to solve this problem?
Click to expand...
Click to collapse
Lob the SD in your PC, goto disk management and format to FAT32
Ethermind said:
Oh, yeah, thnx for response : )
But 3color screen appeared : )
So i download XPERIA Update ROM Utility, put *.nbh in that dir and run it.
After 3 next pressings it start to flash.
Better then from SD card because automatical reboot present : )
Click to expand...
Click to collapse
yea. very simple how to, i did it with energy rom and it works very fine.
ty very much.
Hi,
did you try the hp disk storage format tool? (google it)
Ethermind said:
I trying to make it extra lite.
Click to expand...
Click to collapse
This is relevant to my interests. Will you be making this lite ROM public?
Mod. edit: not a dev related issue, moved to general
Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks
Hello there if you look a couple of threads down on main form page there's a post by Navenedrob who gives step by step instructions on how to sucessful complete the whole process
I did it about 2 weeks ago as a newbie and it very easy to follow very good update
Also make sure you download and use his WM6.5 ROM. No expiration date ...
hlopez said:
Hi, this is my first post on this forum and i'm hoping to get some help to solve my problem.
I have an unlocked ATT treo 750 that i'm currently using with T-Mobile. I was happily running windows 5 and decided to try this new windows mobile 6.5 so i downloaded the rom from a thread on this forum and i ran the update process while my phone was connected to windows zync porgram, so it worked fine, but as soon as i rebooted my phone to the new windows 6.5 it gave me the
"This concludes de beta test of this software release...." now i try to reconnect my phone to my pc to zync and flash another rom but i won't recognize the connection.
what can i do, i know there is a way to flash a rom using your mini sd card but i'm not sure about this process....tell me if i have it right:
1. format your mini sd card using fat32, using a computer with a card reader (i can't format it using my phone cause of ovious reasons)
2. copy the rom image to the mini sd card on the root folder. the rom image should be in .nbh format. (i have a rom called CHEEIMG.nbh by Navenedrob)
3. re-insert the mini sd cad to the phone.....I DONT KNOW WHAT DO AFTER THIS, and what do you mean by HARD SPL or SPL... is it a file i should copy along with the CHEEIMG.nbh file in the mini sd card????
PLEASE HELP ME.. what buttons do i press on my treo 750 to trigger installation...?????
thanks
Click to expand...
Click to collapse
Hi,
I'm sorry, I wrote that tutorial for people who couldn't use HARD SPL (A piece of software that lets you flash the phone) to get Windows Mobile 6.5.
Try formatting the memory card to FAT32 using a card reader, then from your computer, download the ROM here and paste it onto your memory card (ROM Link- http://forum.xda-developers.com/showthread.php?t=541417 ).
Load the memory card into the phone.
Where you've just loaded the memory card, there is a Reset button. It's tiny, and its located where the memory card slot is.
On the other side of the phone is the Media Button. It's the one below the volume buttons. Hold this button down and press the Reset key with your stylus.
The screen should load into the "Bootloader" mode and try to scan your memory card. If it recognises the CHEEIMG.NBH file, it will ask you to press the Call End key and then go on installing itself (I hope).
After saying all this, please note that I'm not an expert and had to experiment. I didn't however brick my phone with a Beta release so I'm giving you this in the hopes that it will work.
Just make sure you have the CHEEIMG.NBH file. It may have a different filename (anything that comes before .nbh), you just have to rename it.
Secondly make sure your card is formatted to FAT32. Google it if you don't understand or if you don't know how. I use a mac so formatting is easy.
Thirdly, familiarize yourself with starting up in Bootloader mode.
Have a play, I hope this helps.
eD
please helpwhen i run haret.exe the following message appears" the file haret cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."
Use another Haret from other ROM.
I have the same problem for my Rhod100. Even installing the .cab file doesn't work. This problem is since this morning. I copied the file for many time and from different people but nothing is working.
Pythonmaniac said:
I have the same problem for my Rhod100. Even installing the .cab file doesn't work. This problem is since this morning. I copied the file for many time and from different people but nothing is working.
Click to expand...
Click to collapse
Yeah I can confirm that your have a bad SD card. I had this kind of SD card before too and it was much more cheaper than original. All the files that you had copied to SD card will be corrupted, that's mean you cannot open it or play it. Then you also cannot make partitions on your SD card as well, am I right?
The only way to solve this problem is BUY A NEW SD CARD
Well i don't think that is the problem because it worked untill 21th of september. But maybe i will format the micro sd card (after i copied all of the files to my hard disk). Maybe that will work, I will try it.
Edit: I just tried to format the Micro SDHC card (It is an Micro SDHC) but it didn't made a difference, I still get the same error. I could gamble to buy a new micro sdhc card but what if that wouldn't make a difference too?
If you dare to try your luck for gambling, then why don't you try your luck to buy a new SD card?
minitool does not show all the partitons
i think jerrytan93 is right as whenever i try to make partition from mini tool then after making the partition the minitool does not show all the partitons, it shows only the fat 32 partition (with full memory).
but when i formatted the card again on my pc using windows then i was able to upload files on my sd card and also excess them with my mobile, that means my sd card is not bad.
but again i can't make partitions so what is the matter, i don't understand
I saw someone (forgot his name) in this forum said that there was some brand's SD card which are unable to make partition. So looks like you are the unlucky one
I've experience the same problem before.
Maybe the problem is ;
1. If you use Winmo Roms that have an OverClock setting like Dynamic rom, jus turn the OC setting off.
2. Maybe you have a bad SD card, try reformating it.
are u have overclocking on ur x1?
With GTX Dynamics ROM, i see Overclocking at Settings/System.
But 826x hasn't it. Where do i can find it?
Try other..
Energy ROM, at first try, it can run haret.exe <-- from Sensedroid..
Running perfectly..
vannanta said:
are u have overclocking on ur x1?
Click to expand...
Click to collapse
The Dynamic roms has the OC setting. U can turn it on or off.
I really don't know the Mhz after OC and before OC.
well, It might be the overclocking problem as others mentioned as I've had the same problem cuz Haret doesn't work with Overclocked roms ... also, I'm kind of new, so I'm not sure about the next tip but it worked for me ...
I went into the startup file next to the Haret and I changed the value from to 614 instead of the higher num cuz some of the Android roms are highly overclocked .... so, by lowering it, it might work ... it took me like 2 hours to find this solution but I'm not sure if it will work