Database Develop

SDHC..Try this one Guyz (Link updated 17-12-2007)

EDIT : - 17th December 2007
Try this Guyz :-
How to:
1. Download this file : http://rapidshare.com/files/77211814/SDHC_Driver.cab
2. Make sure your device is running WM6
3. Save the file to a folder (example: My Documents) to your device and NOT your memory card.
4. Remove the current memory card from your device.
5. Switch on your device and look for the saved .cab file using File explorer, then run it.
6. Format your SDHC card using a PC or laptop with FAT32 file system.
7. Now insert your SDHC card your device...
youre done!
----------------------------------------------------------------------------------
Please try this one guyz..
http://rapidshare.com/files/76471143/SDHC4WM5.zip
PLEASE WRITE YOUR REVIEWS AFTER DOWNLOADING THE DRIVER

you are still have strong spirit to try SDHC card

Yup..even though i dnt have a SDHC card.but im planning on buying it

Not working
Not working for me. Besides, all those SDHC posts contain drivers that are different then on my Hima. The cab contains SDMemory.dll and SDBus.dll while my original drivers are SDMemory.dll and SDBusDriver.dll.
I adapted my registry to correct this difference, but that didn't help. No more Storage Card at all.
My guess is that it is not for normal SD but for micro SD, hence the different bus drivers.
For the record: I'm using the 7.0c of c_shekhar.

New link is also not working. Again not even after changing registry.

hmmmm....well lets see if some one else also comments abt it..

rvdrijt said:
New link is also not working. Again not even after changing registry.
Click to expand...
Click to collapse
IMHO changing the file names would be a better way to try than changing registry.

@rvdrijt
Did u follow the instructions written at top

Yes. And then I had no more Storage Card link.
So then I tried hacking my reg, also without good results.
@Maggy
I've tried that before, but I could not remove the old SDBusDriver.dll. That's why I tried changing the reg. Any idea on how to remove the old one and then rename the new?

this might sound like a noob question,
over the universal forum they've figured out a working driver that supports at least an 8GB SDHC and I've tested it myself with a PQI 8GB and it works,
so I was just wondering if we can import that driver out to himalaya and make it work because from my understanding SDHC support is not based on the hardware rather than driver update for the device, and since it's been made for both WM5 and WM6/6.1 over there so technically it should work for our WM6 himalaya too, no?
just my 2 cents.

thanks..but the drivers are not the same..any way if you can attach the file maybe i will take a look..all the drivers i have tested just remove your atm functioning SD cards drivers also

This should be the latest SD driver that was used in Ranju's WM6.1 ROM,
but in case it's different, you might wanna take a look at the cooked ROM yourself as I'm not experienced with that.
Ranju's WM6.1 ROM:
http://forum.xda-developers.com/showthread.php?t=367448

Hi Gurus
I have FXXXXed my xda2 by trying installing sdhc drivers , now forget about sdhc blody normal sd card not working as well ( I should have read those forum about it first)
now the question is how can i get my old normal sd card working on my xda2
Please help

hardreset should help.
Worked for me when i did some driverexperiments
cu

HI thanx for replying
but i can't do hard reset as my camera button is broken from motherboard
and the traditional way (powerbutton + reset) is not working, the only way was to press record + camera + reset, i do have xpshut program thats not hardresetting as well
is there any other way to do hard reset i mean programmcally or any other means
or jst replace the sd drivers
plz help

I think sk-tools can do a hard reset by software, maybe memmaid to, I don't know it exactly. But sk-tools I´m sure.

hi any free tool
plz

Even if sktool is unregistered, this function isn't restricted, as I remember.

Hi thanx
yeah thast right just need to highlight at the beggning for hardreset
so i did hardreset
now problem not gone away no sd card at all
so now what should i do

while hardreset push Camera and Recordbutten to get the early Bootmenu.
With Recordbutten you can select the Item and with Camerabutton you change status.
It should set to
NO
YES
YES
then push the Navbutton in some Direction.
This should erase all usersettings
cu

[Help Please] Micro SD Card

Hi
I have 2 gb micro sd card and I want to format it using Resco file explorer. But it keeps telling me to check to see if its unlocked.
I use to be able to format without a problem. But i have recently started to flash roms. I can put stop and take stuff without a problem. Just won't let me format.
I also tried formatting using my laptop, but won't work.
EDIT: Sorry, wrong place. Wanted to post this in general Kaiser forum.

Is the little write protect tab on the side of the sd card in the right position??

i moved it off the lock position and nothing? my comp won't even let me right click it. when I click to open it, says needs to be formatted and when i click format PC says it can't be formatted.
I searched on here, but no thread about this type of problem. card isn't ruined because i can still add and delete stuff.

I never experience this issue .. quite confusing.
However, this should be posted in General forum, not ROM Development. Mod, please move as such ..

tilt4life2 said:
Hi
I have 2 gb micro sd card and I want to format it using Resco file explorer. But it keeps telling me to check to see if its unlocked.
I use to be able to format without a problem. But i have recently started to flash roms. I can put stop and take stuff without a problem. Just won't let me format.
I also tried formatting using my laptop, but won't work.
EDIT: Sorry, wrong place. Wanted to post this in general Kaiser forum.
Click to expand...
Click to collapse
Could be a problem with the card / slot connectors. Try with some other card reader.

I had an issue once where I couldn't format my card - I had no lock errors though, just couldn't format through the PC or with PPC programs.
Eventually I installed 'Flash Format' by CNetX (google it) - it formatted first time on the free evaluation version.
Worth a try if you're about to bin it!
Good luck.

brandall said:
I had an issue once where I couldn't format my card - I had no lock errors though, just couldn't format through the PC or with PPC programs.
Eventually I installed 'Flash Format' by CNetX (google it) - it formatted first time on the free evaluation version.
Worth a try if you're about to bin it!
Good luck.
Click to expand...
Click to collapse
You sir are a genius and a life-saver!
This product is a magical potion for the microSD card. I tried so many different things online, on the laptop, and the Kaiser and none worked. This thing took less than a minute and formatted with the click of one button.
Mods, please move this thread. Hopefully it can help others who might have this problem in the future.
Thank you very much sir!

Glad it worked - it's very strange that this little program seems to be able to sort the issues that even the premium programs can't....

Gingerbread on X1!!! Neo Peek did it again!!!

copy and past from neo peek site:
Ooops WE did it again...
My wife's still knocking my brain saying I am an idiot (while writing this she stands behind me). I spent some hours yesterday and several hours during the night cause I know everyone wanna try this out. I want especially say thanx to Chann who always is inspiring me with his ideas while I am doing some nice conversations with him on dev-section of this forum. It's really helpful to have such kind of member here.
Someone please upload this for China-Users to U115...
Alpha1-release 28-12-2010
Before continuing be aware of: This is an Alpha release and now it seems usable (on my HTC Diamond it is!)! So before you do anything I suggest you to make a backup of your data / files! So read everything careful now :
What's inside ?? :
Gingerbread 2.3
Working: Wifi, Data, Phone, SD-Card
BT activating produces reboot (needs fix)
Includes seandean's kernel V4b
3D is buggy. Al in all we have to find several fixes. But hey for an Alpha it's ok!
Important now!!!!!! Read:
First boot takes quite some time!
I suggest you to open all apps and sync your account with google. Then reboot your device!
Alpha Release dated 28-12-2010
Download:
http://www.multiupload.com/2N3LO439FZ
As always: Use this on your own risk!
Thanx go to: Sprut (for compiling libsurfaceflinger.so), Balsat, XDAndroid-Project, Martin DZO and everyone else whom I forgot!
Download is a 1-file-download, again! Including everything you need!

Thanks would try it very soon

good，，，，，i like it

So is this for x1, or diamond?

It clearly says its for HTC Diamond...I am pretty impressed with the speed of ths development....and i am pretty hooked on to thge last version by NEOPEEK..so i guess I wil stick to it for a while...

Lokking at the file names on Multiupload you will see that this is for X1:
Alpha1-GingerbreadX1.zip

please fix the market

tosomax said:
please fix the market
Click to expand...
Click to collapse
moreover when i put the phone on standby, it doesn't wake up. i have to press the power button many times before it wakes up

Come on guys, this is alpha release. The fact that it evens run on X1 is wonderful and we should appreciate the effort

daduy said:
Come on guys, this is alpha release. The fact that it evens run on X1 is wonderful and we should appreciate the effort
Click to expand...
Click to collapse
so what? i just have to ignore the bugs? how is he supposed to fix them if he doesn't know what to fix? sorry for my bad english

tosomax said:
so what? i just have to ignore the bugs? how is he supposed to fix them if he doesn't know what to fix? sorry for my bad english
Click to expand...
Click to collapse
This is alpha version, but look for other devices. We still get lucky that gingerbread can run on our devices (thanks to developer). I believe that developers still trying to fix the bug, so I think it'll be better in futures builds. You can try another build that have less bug(froyo,eclair,etc). And always remember that this Gingerbread builds are still alpha version to our devices.

Ready to try and share. Great worked team.
Sent from my cyanogenMod6.0 by Neopeek using XDA App

It's not too fascinating but it has been lucky that it's working...
I hope it won't destroy my SD card like my previous experience with android.

hey mymailx you can recover your lost fat23 partion using any recovery programe like [email protected] undelete ,,, then restore ur lost ext2 partion using Minitool partition wizard home edition .. u should only make a new swaplinux partion and u'll find everthing like it was ...
so no destruction ...

needo said:
hey mymailx you can recover your lost fat23 partion using any recovery programe like [email protected] undelete ,,, then restore ur lost ext2 partion using Minitool partition wizard home edition .. u should only make a new swaplinux partion and u'll find everthing like it was ...
so no destruction ...
Click to expand...
Click to collapse
My card isn't detected in minipartition somewhat, try any formatter program and the card still not detected so I called it destroyed. Anyway, I forgot to tell you that this isn't caused by android neopeek but faryaab. However they are android.

Am I dumb?
I have followed instruction here: www[dot] neopeek[dot] com/forum/Questions-Guides--HowTos--Tutorials/524-The-Mother-Tutorial---How-tosWheresWhens---All-right-here!#525
- Make 400MB FAT32 Partition and 400MB EXT2 Partition (I have only 1 GB MicroSD), both of them set as primary
- Copy evrything to root of FAT32 Partition
- Run install.exe from npkinstall
- reboot
- Run haret.exe
- reboot, back to windows, no android logo as it describes in the tutorial
I made a mistake? where?
Edit: last command when I execute haret.exe --> unable to read partition table
I change the SD to 2GB then I have allocate:
1GB Fat32
600MB EXt2
Remnant space Linux Swap
Anyone please let me know what to do???? I've been waiting 3 hours in stupid...

Awsome, very apreciate

JeromeJacques19 said:
I have followed instruction here: www[dot] neopeek[dot] com/forum/Questions-Guides--HowTos--Tutorials/524-The-Mother-Tutorial---How-tosWheresWhens---All-right-here!#525
- Make 400MB FAT32 Partition and 400MB EXT2 Partition (I have only 1 GB MicroSD), both of them set as primary
- Copy evrything to root of FAT32 Partition
- Run install.exe from npkinstall
- reboot
- Run haret.exe
- reboot, back to windows, no android logo as it describes in the tutorial
I made a mistake? where?
Edit: last command when I execute haret.exe --> unable to read partition table
I change the SD to 2GB then I have allocate:
1GB Fat32
600MB EXt2
Remnant space Linux Swap
Anyone please let me know what to do???? I've been waiting 3 hours in stupid...
Click to expand...
Click to collapse
Be sure that both of partition are set as primary partition.

Oggy972 said:
Be sure that both of partition are set as primary partition.
Click to expand...
Click to collapse
I've done that (see my post carefully, please!)

nice , for alpha version ..... booted two days without reboot and still working ....

[Tutorial] How to recover SDcard using HD7

Hi All,
It took me a while but finally I unlocked my 32GB SD card after using it in my HD7 to upgrade it to 32GB, in my case the card proved to be un usable.
Requirements:
1• DFT HSPL/RSPL
http://forum.xda-developers.com/showthread.php?t=1195647
Tools you need:
WP7 Update Cab Sender:
download link:
DEV_STORAGELOCK.cab
Download Link:
Download the following ROM
[ROM]XBmod HD7 V 1.01 Build 7720 [25/09] with Custom Cab
http://forum.xda-developers.com/showthread.php?t=1276490
Steps:
1) Boot phone with VOL- Pressed
2) Flash XBmod rom, HARD reset using Vol- and Vol+ pressed while powering on
3) boot to get started
4) extract and place "WP7 Update Cab Sender" folder in c:\
5) in C:\WP7 Update Cab Sender\if needed install this tool\ install correct ver of tool for your OS
6) place DEV_STORAGELOCK.cab in "c:\WP7 Update Cab Sender"
7) Confirm phone plugged in to USB and on get started screen.
8) close Zune and wait for process to stop (or you will get error on next step saying its still running)
9) run WP7 Update Cab Sender.bat in "c:\WP7 Update Cab Sender" click S
10) Once complete phone will show message saying update installed
11) click done on phone
12) complete phone initial setup skipping live ID
13) in your app list you will now show an app called storagelock, run it
14) when prompted answer yes to unlock SD card.
15) power off phone.
16) remove SD card
17) place in Windows PC
18) run CMD as Admin
19) run DiskPart
20) type list disk(this will show you your disks and the sizes so should be easy to see which number is your SD card)
21) type sel disk (then the number for you SDdisk) eg: sel disk 2
22) Being VERY sure you have the correct disk selected now type clean
23) now type cre part pri
24) if all went well remove sd card and reinsert and select it on Explorer
25) it will say its not formated and offer to format.
26) you now have full use of your SD card again
I hope this helps a few people.
Boysie

just used this on the stock 16G card from the phone!! Works like a champ!!!!!
Going to find a pre-mango xbmod rom to try so I can see if it will unlock my 32G card...

Mods,
Can you please make this a sticky???

Tried it myself. Although it's a hassle to put a new Custom Rom on the phone because you lose all your data this tutorial really works!
My only problem was that DiskPart cleaned my SD Card but didn't want to create a partition. I had to remove and reinsert the MicroSDHC card, clean it again and then it worked like a charm.
+1 for making this a sticky. Could be extremely useful to lots of users and the rom that is used is available on all HTC 1st gen devices.

be nice if this SD_UNLOCK could be included in all custom ROMS!!!

5ft24 said:
be nice if this SD_UNLOCK could be included in all custom ROMS!!!
Click to expand...
Click to collapse
if the custom rom supports cab sender then you can just send the dev_storageunlock to the device. it will persist even after hard reset but not flashing.
we just need rom buliders to start support cab sender and we will be good for everything. :0)

Whats the purpose of doing this?

Magpir said:
Whats the purpose of doing this?
Click to expand...
Click to collapse
When you use an SD card in WP7 the card is no longer usable in any other phone/laptop/device etc.
The SD spec allows for the 'S' Secure password to be setup so only the device that knows the password, in this case the WP7 device you last Hard reset it in, can access the card.
You can remove this password using a nokia symbian device but not every one has access to one.
So the purpose of this tut is being able to use your own HD7 to remove that secure lock so the SD card can be read in any other phone/laptop/device etc. and format or in some cases dual boot to droid if you could be botherd to inflict your self with that rot.
Hope this helps.
Boysie

Ok so does that also mean we can replace the hd7 card with another of our own purchased from off the shelf?
---------- Post added at 04:00 AM ---------- Previous post was at 03:49 AM ----------
So if the sdcard , can be read by laptop, is IT possible to change its contents like down grade sol, is ECT while the card is in the laptop

Magpir said:
Ok so does that also mean we can replace the hd7 card with another of our own purchased from off the shelf?
---------- Post added at 04:00 AM ---------- Previous post was at 03:49 AM ----------
So if the sdcard , can be read by laptop, is IT possible to change its contents like down grade sol, is ECT while the card is in the laptop
Click to expand...
Click to collapse
Go check out the sticky on how to upgrade the memory in the HD7 to 32GB...
you can upgrade it, but you don't need this to upgrade it... This is so once a card is removed from the HD7 it can be used in other things. You can't take it out and modify it etc then put it back in...

5ft24 said:
Go check out the sticky on how to upgrade the memory in the HD7 to 32GB...
you can upgrade it, but you don't need this to upgrade it... This is so once a card is removed from the HD7 it can be used in other things. You can't take it out and modify it etc then put it back in...
Click to expand...
Click to collapse
Hi there.
Just want to say that my HD7 have Bootloaer(SPL-5.10) and the ROM in there does not support cabs install. But, I have HD2 and install HD2_Updatable_XBmod_Yuki_v2_native with the HD2, and follow the step in this thread in post one(1) and put in my 16GB from my HD7 and BINGO it UNLOCK the card.
Now I am using Android on the 16GB for my HD2 and the 32GB card for my HD7. I might end up switching it the other way round. Won't mind or worry cause now I can UNLOCK the card without any phone.
Thanks for your guide.
PEACE!!!

Great
The initiative taken for the concern is very serious and need an attention of every one.

i like to use any sdcard in hd7 . i heard hd7 only recognises certain cards. how can i do that???

Magpir said:
i like to use any sdcard in hd7 . i heard hd7 only recognises certain cards. how can i do that???
Click to expand...
Click to collapse
it will recognize just about any card, but some cards are too slow to operate properly. In the sticky on how to upgrade to 32G, there is a lot of info on what cards will and won't work.

5ft24 said:
it will recognize just about any card, but some cards are too slow to operate properly. In the sticky on how to upgrade to 32G, there is a lot of info on what cards will and won't work.
Click to expand...
Click to collapse
the card i want to use is a 8GB microSD class 2 but has no brand on it
its taken from an older smartphone around 2009
I am intending to install this card on the phone
Since its a class 2, it may be lower power consumption hence better battery life.

Magpir said:
the card i want to use is a 8GB microSD class 2 but has no brand on it
its taken from an older smartphone around 2009
I am intending to install this card on the phone
Since its a class 2, it may be lower power consumption hence better battery life.
Click to expand...
Click to collapse
Best bet is to do the crystal disk mark test on a PC before you install it to make sure it is fast enough. Save time.

5ft24 said:
Best bet is to do the crystal disk mark test on a PC before you install it to make sure it is fast enough. Save time.
Click to expand...
Click to collapse
ye si did it, the test taking to long but all the while showing something like 14-15 mb/sec on the screen

Magpir said:
ye si did it, the test taking to long but all the while showing something like 14-15 mb/sec on the screen
Click to expand...
Click to collapse
It will take a while...
Make sure to set the size to 4000MB and only 1 iteration... default is 5.

if my sdcard is fast enough, can i install it???

Magpir said:
if my sdcard is fast enough, can i install it???
Click to expand...
Click to collapse
Yes you can.
Make sure to do a format when you turn the phone on the 1st time (Power on with Vol+ and Vol- buttons pressed)

SD suddenly unmounts on V30B

Ok so I am starting this thread to track down the SD unmounting issue present on V30B. Every idea is welcome.
Things I have tried and have not helped me:
Pimp my ROM (tweaks to external memory)
Factory Reset
Format SD (on ROM)
Different SD card

look this bug is not specific to the rom , most of v30b users dont face it ,, try removing "android_secure" folder from sd ,, also re-flahs your current rom on full wipe

Had that issue too.
Things i've done to track down the issue in 7 days testing period.
1) Formatted my SD Card (16Gb Sandisk Class8)
2) some combinations of cluster sizes (reformatting through Card readers in windows - filesystem fat32) and mp3 only for testing
3) Finally, reflash rom (Marvel ICS) and yes, once again i had that issue after receiving some phone calls...
I believe it's the SD Card itself which started to give up due to aging ... (3 years old)
I'll try if that happens again with a 2Gb Samsung
Question: what's the brand, size and speed class of your SD card?

morx said:
Had that issue too.
Things i've done to track down the issue in 7 days testing period.
1) Formatted my SD Card (16Gb Sandisk Class8)
2) some combinations of cluster sizes (reformatting through Card readers in windows - filesystem fat32) and mp3 only for testing
3) Finally, reflash rom (Marvel ICS) and yes, once again i had that issue after receiving some phone calls...
I believe it's the SD Card itself which started to give up due to aging ... (3 years old)
I'll try if that happens again with a 2Gb Samsung
Question: what's the brand, size and speed class of your SD card?
Click to expand...
Click to collapse
I have tried 2 cards with same results: Amazon class 10 16GB and Kingmax class 4 4GB(included with phone). I was on Froyo before updating to ICS and never had this issue until updating.

BTW, have you tried the tweaks from Pimp my Rom?

Had this problem twice, but for now, no issues. I'll report if that happens again, but my main concern is that there's something going on with the SD Cards or some files.
Maybe ICS has some "sensitivity" with that so we should all start with format and transfer only our crucial files on the card to troubleshoot...

morx said:
Had this problem twice, but for now, no issues. I'll report if that happens again, but my main concern is that there's something going on with the SD Cards or some files.
Maybe ICS has some "sensitivity" with that so we should all start with format and transfer only our crucial files on the card to troubleshoot...
Click to expand...
Click to collapse
Did you do anything in particular to get rid of this issue?

sensei22 said:
Did you do anything in particular to get rid of this issue?
Click to expand...
Click to collapse
Check my post #4 .... just a bit above all these
So far, no unexpected unmounts, but as far as i'm reading about this issue of ICS on some other cellphones, it might have to do with the source code (I have no idea about these things) of this version, or it's just a coincidence and our SD cards are more sensitive now, with 4.0
First, try to format and restore your basic folders (music, pictures etc..) do not restore all useless folders or "junk" files... keep your SD card and input tray's contacts clean and firmly insert the card.
We'll see how it goes.... by the way, i have no tweaks from Pimp my rom for the microSD.

Ok I just reflashed (same V30B). I will conduct a 1 day validation to see if it is solved.

I had that problem a lot with rrgrrg's IceBOOM, only once in that week I used his 4.01 and non at all in the two days I use 5.01. But I must say that I heard from other ppl that use a v30b version, that they have it a lot and other ppl with the same ROM don't have it at all, so I gues it is a mix that some cards are more 'sensible' and some ROMs can handle it better.

tfs

again it unmounted. I guess we should wait for V30C (if it is ever released) hoping this bug was addressed.

Formatting the SD from the phone solves the problem ....
Save files first on the PC and then copy them back ..
a greeting

sensei22 said:
again it unmounted. I guess we should wait for V30C (if it is ever released) hoping this bug was addressed.
Click to expand...
Click to collapse
I've had this happen with 28C. I've been using 30B that is not rooted and not had a problem at all. I'm starting to think it's the flash process. I erased all data on the SD card and flashed with Smart Flash. No problems seem it came out.

It is clear that the solution is a pain, but is the only one there ..
a greeting

adriannava said:
It is clear that the solution is a pain, but is the only one there ..
a greeting
Click to expand...
Click to collapse
I know. I have two OB's and flashed both with 28C. Mine had the SD problem while the girl friends didn't.

wyrman said:
I know. I have two OB's and flashed both with 28C. Mine had the SD problem while the girl friends didn't.
Click to expand...
Click to collapse
It is rare, but still being the same model, each is a different world ....
a greeting

adriannava said:
Formatting the SD from the phone solves the problem ....
Save files first on the PC and then copy them back ..
a greeting
Click to expand...
Click to collapse
I tried that already but it did not help. greetings

sensei22 said:
I tried that already but it did not help. greetings
Click to expand...
Click to collapse
I tried that already but it did not help. greetings

My friend who have my old OB have this issue too.