please helpwhen i run haret.exe the following message appears" the file haret cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."
Use another Haret from other ROM.
I have the same problem for my Rhod100. Even installing the .cab file doesn't work. This problem is since this morning. I copied the file for many time and from different people but nothing is working.
Pythonmaniac said:
I have the same problem for my Rhod100. Even installing the .cab file doesn't work. This problem is since this morning. I copied the file for many time and from different people but nothing is working.
Click to expand...
Click to collapse
Yeah I can confirm that your have a bad SD card. I had this kind of SD card before too and it was much more cheaper than original. All the files that you had copied to SD card will be corrupted, that's mean you cannot open it or play it. Then you also cannot make partitions on your SD card as well, am I right?
The only way to solve this problem is BUY A NEW SD CARD
Well i don't think that is the problem because it worked untill 21th of september. But maybe i will format the micro sd card (after i copied all of the files to my hard disk). Maybe that will work, I will try it.
Edit: I just tried to format the Micro SDHC card (It is an Micro SDHC) but it didn't made a difference, I still get the same error. I could gamble to buy a new micro sdhc card but what if that wouldn't make a difference too?
If you dare to try your luck for gambling, then why don't you try your luck to buy a new SD card?
minitool does not show all the partitons
i think jerrytan93 is right as whenever i try to make partition from mini tool then after making the partition the minitool does not show all the partitons, it shows only the fat 32 partition (with full memory).
but when i formatted the card again on my pc using windows then i was able to upload files on my sd card and also excess them with my mobile, that means my sd card is not bad.
but again i can't make partitions so what is the matter, i don't understand
I saw someone (forgot his name) in this forum said that there was some brand's SD card which are unable to make partition. So looks like you are the unlucky one
I've experience the same problem before.
Maybe the problem is ;
1. If you use Winmo Roms that have an OverClock setting like Dynamic rom, jus turn the OC setting off.
2. Maybe you have a bad SD card, try reformating it.
are u have overclocking on ur x1?
With GTX Dynamics ROM, i see Overclocking at Settings/System.
But 826x hasn't it. Where do i can find it?
Try other..
Energy ROM, at first try, it can run haret.exe <-- from Sensedroid..
Running perfectly..
vannanta said:
are u have overclocking on ur x1?
Click to expand...
Click to collapse
The Dynamic roms has the OC setting. U can turn it on or off.
I really don't know the Mhz after OC and before OC.
well, It might be the overclocking problem as others mentioned as I've had the same problem cuz Haret doesn't work with Overclocked roms ... also, I'm kind of new, so I'm not sure about the next tip but it worked for me ...
I went into the startup file next to the Haret and I changed the value from to 614 instead of the higher num cuz some of the Android roms are highly overclocked .... so, by lowering it, it might work ... it took me like 2 hours to find this solution but I'm not sure if it will work
Related
Hey all, i know there are many miniSD problem threads, but i wasnt able to find this particular one...
I just got a PQI 2GB miniSD, i formated it with SKTools, and started installing some programs...installs go fine, but when i try to run the programs, it says that its not signed with a trusted certificate, or one of its components cannot be found. i get that msg with all the programs i install...and nothing works on it!!!
Use file explorer to see if you can browse the card. The error you have seen usually mean that the device is unable to read the card. You will need to reformat the card again. I usually do it in my laptop using a card reader.
i can browse it...it gets detected with the right amount of size and everything...my preveious card was a 256 MB and it was always good...
Copy everything in the card to your computer. Reformat the card but using your computer this time. Copy everything back to the card.
ive tried that too!! still nothing...
In that case I am running out of idea I am using the same PQI and have no problem with my Wizard. You probably get a defective card. Maybe it's time to page the vendor for a replacement card.
Usually if you just format it in via the computer, it should work. Try formatting it twice in succession and if it still does not work, you might have a defective card like imisim said above.
Guys, stop confusing...
It has nothing to do with a memory card.
And you Malik use search next time!
Here's the solution -
http://forum.xda-developers.com/showthread.php?t=249863&highlight=trusted+certificate
rottie said:
Guys, stop confusing...
It has nothing to do with a memory card.
And you Malik use search next time!
Here's the solution -
http://forum.xda-developers.com/showthread.php?t=249863&highlight=trusted+certificate
Click to expand...
Click to collapse
i did use the search, and that didnt work..there is no solution on that page, it didnt work for those who had the problem...
rottie said:
Guys, stop confusing...
It has nothing to do with a memory card.
And you Malik use search next time!
Here's the solution -
http://forum.xda-developers.com/showthread.php?t=249863&highlight=trusted+certificate
Click to expand...
Click to collapse
It has everything to do with the memory card because the solution you have posted won't work and doesn't apply to the OP. The solution only apply to a few applications which doesn't have the "sign-code/certificate". After you have signed the code and it will work for those apps.
The OP problem is that none of the installed programs will work, not just one or two none signing certificate (BTW, most of the none signing apps are usually warez/cracked ) The OP problems are mostly due to the memory card itself.
EDIT : - 17th December 2007
Try this Guyz :-
How to:
1. Download this file : http://rapidshare.com/files/77211814/SDHC_Driver.cab
2. Make sure your device is running WM6
3. Save the file to a folder (example: My Documents) to your device and NOT your memory card.
4. Remove the current memory card from your device.
5. Switch on your device and look for the saved .cab file using File explorer, then run it.
6. Format your SDHC card using a PC or laptop with FAT32 file system.
7. Now insert your SDHC card your device...
youre done!
----------------------------------------------------------------------------------
Please try this one guyz..
http://rapidshare.com/files/76471143/SDHC4WM5.zip
PLEASE WRITE YOUR REVIEWS AFTER DOWNLOADING THE DRIVER
you are still have strong spirit to try SDHC card
Yup..even though i dnt have a SDHC card.but im planning on buying it
Not working
Not working for me. Besides, all those SDHC posts contain drivers that are different then on my Hima. The cab contains SDMemory.dll and SDBus.dll while my original drivers are SDMemory.dll and SDBusDriver.dll.
I adapted my registry to correct this difference, but that didn't help. No more Storage Card at all.
My guess is that it is not for normal SD but for micro SD, hence the different bus drivers.
For the record: I'm using the 7.0c of c_shekhar.
New link is also not working. Again not even after changing registry.
hmmmm....well lets see if some one else also comments abt it..
rvdrijt said:
New link is also not working. Again not even after changing registry.
Click to expand...
Click to collapse
IMHO changing the file names would be a better way to try than changing registry.
@rvdrijt
Did u follow the instructions written at top
Yes. And then I had no more Storage Card link.
So then I tried hacking my reg, also without good results.
@Maggy
I've tried that before, but I could not remove the old SDBusDriver.dll. That's why I tried changing the reg. Any idea on how to remove the old one and then rename the new?
this might sound like a noob question,
over the universal forum they've figured out a working driver that supports at least an 8GB SDHC and I've tested it myself with a PQI 8GB and it works,
so I was just wondering if we can import that driver out to himalaya and make it work because from my understanding SDHC support is not based on the hardware rather than driver update for the device, and since it's been made for both WM5 and WM6/6.1 over there so technically it should work for our WM6 himalaya too, no?
just my 2 cents.
thanks..but the drivers are not the same..any way if you can attach the file maybe i will take a look..all the drivers i have tested just remove your atm functioning SD cards drivers also
This should be the latest SD driver that was used in Ranju's WM6.1 ROM,
but in case it's different, you might wanna take a look at the cooked ROM yourself as I'm not experienced with that.
Ranju's WM6.1 ROM:
http://forum.xda-developers.com/showthread.php?t=367448
Hi Gurus
I have FXXXXed my xda2 by trying installing sdhc drivers , now forget about sdhc blody normal sd card not working as well ( I should have read those forum about it first)
now the question is how can i get my old normal sd card working on my xda2
Please help
hardreset should help.
Worked for me when i did some driverexperiments
cu
HI thanx for replying
but i can't do hard reset as my camera button is broken from motherboard
and the traditional way (powerbutton + reset) is not working, the only way was to press record + camera + reset, i do have xpshut program thats not hardresetting as well
is there any other way to do hard reset i mean programmcally or any other means
or jst replace the sd drivers
plz help
I think sk-tools can do a hard reset by software, maybe memmaid to, I don't know it exactly. But sk-tools I´m sure.
hi any free tool
plz
Even if sktool is unregistered, this function isn't restricted, as I remember.
Hi thanx
yeah thast right just need to highlight at the beggning for hardreset
so i did hardreset
now problem not gone away no sd card at all
so now what should i do
while hardreset push Camera and Recordbutten to get the early Bootmenu.
With Recordbutten you can select the Item and with Camerabutton you change status.
It should set to
NO
YES
YES
then push the Navbutton in some Direction.
This should erase all usersettings
cu
back then i have always been getting file corruption on my sd card and i have read up a lot on it but nothing really works. After i switched to Open Touch v3.0 it was fine until yesterday my sd card got corrupted again and i lost a lot of pictures.. Anyone have any solution?
porkch0p said:
back then i have always been getting file corruption on my sd card and i have read up a lot on it but nothing really works. After i switched to Open Touch v3.0 it was fine until yesterday my sd card got corrupted again and i lost a lot of pictures.. Anyone have any solution?
Click to expand...
Click to collapse
sounds like you have a bad micro sd card. Corruption was common problem with the stock T-Mobile rom but not usually a problem with other roms.
Maybe you can take it out and format it. Hard Reset the phone and try it again.
You can format your card with Windows and that should work fine. Also I've had this program for awhile which is supposed to be far superior to any other program for formatting Micro SD Cards, but I've never used it. Here it is if you'd like it.
any special way to format it or should i just right click and then format?
porkch0p said:
any special way to format it or should i just right click and then format?
Click to expand...
Click to collapse
It might be best to take the card out of the phone. Put it in a card reader and format it on your PC, then put it back in the phone. Making sure you hear it Click in.
SD-Card
porkch0p said:
Anyone have any solution?
Click to expand...
Click to collapse
I think there are some possible reasons causing troubles like this.
- Files where not cleanly closed at poweroff.
Alway make sure, all programms and applications are terminated before you shut down.
- Incompatible SD-Card
Always refrain from cheap and/or unbranded Cards. I use a Toshiba 2GB SDCard. Never had any problems. Even with the orginal stock ROM with WM5.
- defective SD-Card
Kinda hard to detect if you have just one card. Plug the SDCard into your PC and do a "surfacescan" on the virtual Drive.
- unstable SD-Card connectors
Try to clean the connection-pads on the card and inside your device with a small brush or paper tissue. Never use any other fluits than water to clean connection-pads on the card and just a little drop of it. Make sure everything is dry before you turn your device back on or some parts could get seriously damaged!
I think its also a good advice to see your SD-Card and Systemmemory as a very unsafe and unstable place for critical data. Always do backups as often as you can.
Sorry, for my bad english. Its late and I already had some drinks PLUS I am not very used to speak english anymore..
Monarch73 said:
I think there are some possible reasons causing troubles like this.
- Files where not cleanly closed at poweroff.
Alway make sure, all programms and applications are terminated before you shut down.
- Incompatible SD-Card
Always refrain from cheap and/or unbranded Cards. I use a Toshiba 2GB SDCard. Never had any problems. Even with the orginal stock ROM with WM5.
- defective SD-Card
Kinda hard to detect if you have just one card. Plug the SDCard into your PC and do a "surfacescan" on the virtual Drive.
- unstable SD-Card connectors
Try to clean the connection-pads on the card and inside your device with a small brush or paper tissue. Never use any other fluits than water to clean connection-pads on the card and just a little drop of it. Make sure everything is dry before you turn your device back on or some parts could get seriously damaged!
I think its also a good advice to see your SD-Card and Systemmemory as a very unsafe and unstable place for critical data. Always do backups as often as you can.
Sorry, for my bad english. Its late and I already had some drinks PLUS I am not very used to speak english anymore..
Click to expand...
Click to collapse
Thanks for your help don't worry about the english, i still understand you and thats all that matters. i am using Sandisk 2gb.
BTW, zcink
the file you gave me doesn't work, it doesn't even let me extract it
Don't install any programs that may be running at any given time on your SD card. If you have a program running (that's installed on the SD card) and you phone hibernates/shuts down after not being used ... will cause SD corruption.
Nothing with a Today plugin that you use ... nothing that you may accidently leave running.
duprade said:
Don't install any programs that may be running at any given time on your SD card. If you have a program running (that's installed on the SD card) and you phone hibernates/shuts down after not being used ... will cause SD corruption.
Nothing with a Today plugin that you use ... nothing that you may accidently leave running.
Click to expand...
Click to collapse
and still every benchmark test shows...
... reading main memory = FASTER
... reading storage card = SLOWER
even with SDHC card!!
So I install all apps to mainmemory...
porkch0p said:
BTW, zcink
the file you gave me doesn't work, it doesn't even let me extract it
Click to expand...
Click to collapse
You are right. It was not zipped right. I took it down. Zipped it correctly, tested it and reuploaded it. The one thats there now is the new one. This is supposed to be Professional software. The guy I got it from said it was the Best thing on the Market. I had never used it before, but I tested it today and it works fine.
Cheers!
Mine corrupted too
Hi, just few minutes back I was trying to copy some files from external harddisk to my wing's stock supplied Sandisk 1 gb memory card and looks like it got corrupted. All I see is some junk characters and boxes as file name. I lost all my (memorable)photos and softwares . I was trying to copy directly from my external disk to phones storage card and I am not sure whether this caused this issue. I have Open touch 2.7 biggy.
I have two questions.
a. Where does active sync stores all the files, contacts, calendar entries in computer (the directory path). I tried searching in the computer but could not find it.
b. Does active sync saves my storage cards file too? I dont believe so. Is there a way to ask active sync to backup files from SD card too?
Thanks in advance
I am a serial flasher(!). Up until yesterday my latest ROM was dutty 3.3. All was working fine.
I flashed 3.4 (running BLAC_USPL.EXE) the storage card way, putting the storage card in once I was in bootloader mode etc. ROM loaded fine, but ever since then, manilla wont recognizre my photos, and is giving me a hard time on music.
In addition, without the storage card inserted, device runs MUCH faster than when it is inserted. i thought it was a problem with the 16Gig card, so I reformatted it and reloaded my data (which I can see on file explorer). SAME problem: Manilla wont load pictures and device slow.
I tried 3 other ROMS, including going back to Dutty 3.3. SAME problem: Manilla wont load pictures and device slow
I tried another storage card, this time a 6gb wich has always been flawless. formatted once on the device. formatted anpther time on a PC. SAME problem: Manilla wont load pictures and device slow.
Im going crazy. Can anyone offer some advice?
i don't know if the File System can make any differance, but try multiple types, format it once in FAT32 and test, then NTFS and Test.
maybe one of them is slow!
let us know how it goes
cheers
OK will try. thing is that the machine just gets slower and slower, as if some major process is running in the background. Ideas?
..and its a problem that never occured in the past.
I know it's a long shot but has any "crud" built up in the microsd card slot. If you've eliminated the sd card it's self and everything is fine without the card sound sounds like it's the slot it's self.
had same problem, reformating complately SD card helped me, try formating it again dont use quick format option.
hope that's gonna help you.
cheers
i figured it may possibly be a corrupt file in my DCIM (pictures) folder which stopped manilla reading the folder and kept it busy scanning the folder (hence machine slowwwwwwwwwwwdown), so renamed it, and the problem has gone. Odd, as I can read all the pictures on my PC.
thnaks for all comments
Did i miss somting, you say this is due to a 1.59 rom, only one i know of is CHT and based on your contry I don't see a match, do you have a 1.59 WWE rom
ekerbuddyeker said:
I am a serial flasher(!).
Click to expand...
Click to collapse
There's your problem - use USB to flash.
Seven_PRX said:
There's your problem - use USB to flash.
Click to expand...
Click to collapse
as opposed to the SD method? It may be that entering the card during the process (as outlined by Dutty et al) can cause other files to get corrupted...?
try hard reset after rom flashing.
ekerbuddyeker said:
I am a serial flasher(!). Up until yesterday my latest ROM was dutty 3.3. All was working fine.
I flashed 3.4 (running BLAC_USPL.EXE) the storage card way, putting the storage card in once I was in bootloader mode etc. ROM loaded fine, but ever since then, manilla wont recognizre my photos, and is giving me a hard time on music.
In addition, without the storage card inserted, device runs MUCH faster than when it is inserted. i thought it was a problem with the 16Gig card, so I reformatted it and reloaded my data (which I can see on file explorer). SAME problem: Manilla wont load pictures and device slow.
I tried 3 other ROMS, including going back to Dutty 3.3. SAME problem: Manilla wont load pictures and device slow
I tried another storage card, this time a 6gb wich has always been flawless. formatted once on the device. formatted anpther time on a PC. SAME problem: Manilla wont load pictures and device slow.
Im going crazy. Can anyone offer some advice?
Click to expand...
Click to collapse
there´s already a thread discussing this issue with a vanishing sd-card after flashing the new roms. Take a look here:
http://forum.xda-developers.com/showthread.php?t=506560&page=1
Okay, it's irritating. try googling but it is not even a search result or probably I'm a dumb.
I got pissed right now. After try an android on X1 and feel I like it, it's stucked at somewhat. So I soft reset it and now when log in to WinMo it asked me to format the SD Card, after i try it. the SD is till not detected.
Then plug USB Cable but still the computer just sound beep twice and show none in my Computer.
I try to remove the SD to my Aspen and Nokia 5800 but they also can't detect it. I have no micro SD reader or adapter so I can't try on PC.
Help me.
VSJ said:
Help me.
Click to expand...
Click to collapse
"Please" would have been a nice addition here
Not sure what you might have messed up with Android, but to check the SD there's only two options:
get a new one and try again or
get yourself a µSD reader of any kind, shouldn't be too expensive
BTW: You say you installed Android and after soft reset you are in WinMo again? That doesn't sound like really having "installed" Android to me - might be an idea to post your question where you got whatever you installed on your phone to get the Android feeling.....
louis0815 said:
"Please" would have been a nice addition here
Not sure what you might have messed up with Android, but to check the SD there's only two options:
get a new one and try again or
get yourself a µSD reader of any kind, shouldn't be too expensive
BTW: You say you installed Android and after soft reset you are in WinMo again? That doesn't sound like really having "installed" Android to me - might be an idea to post your question where you got whatever you installed on your phone to get the Android feeling.....
Click to expand...
Click to collapse
I'm sorry 'please' has several meaning in my culture. My culture prohibit a girl to ask 'please' to anonymous. If that word helpful, okay, please help me.
English isn't my language so you might interpret what I want to say wrongly.
Android is installed and I had run it for days. Once upon time, in the middle of proccessing something, it stuck so I did a soft reset. Then I boot into Windows Mobile (not Android) -DualBOOT- and Windows Mobile ask me to format microSD Card but after it is formatted, the card is invisible. update: I borrow my friend's an imported SD Card, microSD is detected but the computer ask to insert in it.
VSJ said:
My culture prohibit a girl to ask 'please' to anonymous.
Click to expand...
Click to collapse
OK, couldn't see that (neither your gender nor your origin) - was not meant offensive though
English isn't my language so you might interpret what I want to say wrongly.
Android is installed and I had run it for days. Once upon time, in the middle of proccessing something, it stuck so I did a soft reset. Then I boot into Windows Mobile (not Android) -DualBOOT- and Windows Mobile ask me to format microSD Card but after it is formatted, the card is invisible. update: I borrow my friend's an imported SD Card, microSD is detected but the computer ask to insert in it.
Click to expand...
Click to collapse
dualBoot was the missing detail for me.....
Purely guessing as I am not an Android expert:
Were you able to boot into WinMo before that "crash"?
Were you able to boot into Android after the crash?
Can Android handle FAT32 formatted cards?
louis0815 said:
OK, couldn't see that (neither your gender nor your origin) - was not meant offensive though
dualBoot was the missing detail for me.....
Purely guessing as I am not an Android expert:
Were you able to boot into WinMo before that "crash"?
Were you able to boot into Android after the crash?
Can Android handle FAT32 formatted cards?
Click to expand...
Click to collapse
It's Okay,
Yes no problem before. I'm not sure how my card formatted but it's original coming from the package.
Try to format SD card in computer with FAT32.
For dual boot you have make partition formated with Ext2 right? What prograd did you use for partitioning of SD? Minitool partition? Try to delete partitions used for Android.
Hi VSJ,
are u using XDAAndroid from frayaab, (I see ur post there too). My SD is also fried out. You're not alone. at least, there're 2-3 people who have the same problem. Someone said that the SD is fried out.
louis0815 said:
...
Were you able to boot into Android after the crash?
Can Android handle FAT32 formatted cards?
Click to expand...
Click to collapse
RBRiddick said:
Try to format SD card in computer with FAT32.
For dual boot you have make partition formated with Ext2 right? What prograd did you use for partitioning of SD? Minitool partition? Try to delete partitions used for Android.
Click to expand...
Click to collapse
You should know that in X1 port Android, There are two types of releases: ones with ext2 partition and ones without. And I think this girl have android without EXT2 partition. Anyway question if Android can detect is is pretty lame, no offense, I think if the Storage Card isn't working how can you run the Android...
Don't you read that the card isn't detected. It's pretty clear, our problem that the card isn't even detected from OS File Explorer. How can that ur suggested software can detect it?
Hi VSJ, I want to update you. I've asked my friend w/o lucky and bring the card to SESC, I can assure you that SE won't guaranty SD Card.
Thank you for trying to help me.
Since the problem is occurred to many people, I dunno think that the Android only killed mine. I'm giving up. I think it's over a hardware issue.
The developer of the android also has no idea why the problem can be occurred.