Assign 3G on/off to hardware button - Tilt, TyTN II, MDA Vario III General

I am looking for a quick and simple application/script that will allow me to turn on & off 3G, but still allow EDGE/GPRS to work. I'd like something I can just assign to a hardware button or as a shortcut.
I've tried BandSwitch and looked at phonealarm and neither are what I'm looking for. I tried the 10 button commgr, and it didn't want to work for me.

Maybe you can do something with using MortScript. With MortScript you can check the presence of a connection, connect and disconnect a connection.
After creating a script you can assign it to a button or a shortcut.

Mortscript is worth investigating.
Until I get around to playing around with Mortscript this is what I did.
I created a shortcut to the Band tab in the Phone settings app. This enables me to switch between GSM/3g and power cycle the radio with a couple of screen taps. As long as the shortcut is located in /Windows/StartMenu/Programs, it will be picked up by the buton mapping app and will be available to be mapped.
On my Vario III the shortcut properties are
Code:
"ctlpnl.exe" cplmain.cpl,20,3

Related

hold comm to vibrate?

Anyone figured out how to map to a different button? This is the one feature i miss.
-mix
mixmaven said:
Anyone figured out how to map to a different button? This is the one feature i miss.
-mix
Click to expand...
Click to collapse
Does this work?
That is what I tried, but there isn't a comm button on the Kaiser... It didn't work on any of the buttons I found. Does anyone know the reg key? we could probably change it to the ok/close button instead. I emailed kyphur to see if he knows...
-mix
mixmaven said:
That is what I tried, but there isn't a comm button on the Kaiser... It didn't work on any of the buttons I found. Does anyone know the reg key? we could probably change it to the ok/close button instead. I emailed kyphur to see if he knows...
-mix
Click to expand...
Click to collapse
Use "Vibra Switch" then Do a seach its on XDA.
wpbear said:
Use "Vibra Switch" then Do a seach its on XDA.
Click to expand...
Click to collapse
I tried this, and it's a good concept, except the AT&T ROM doesn't expose PTT as a possible button mapping, which means one of the existing start/PIE/messaging/ok/camera buttons would have to be sacrificed for a vibe toggle.
The superfluous PTT button is the obvious candidate for a vibrate toggle but sadly neither of the suggestions allow its use as such.
niralisse said:
I tried this, and it's a good concept, except the AT&T ROM doesn't expose PTT as a possible button mapping, which means one of the existing start/PIE/messaging/ok/camera buttons would have to be sacrificed for a vibe toggle.
The superfluous PTT button is the obvious candidate for a vibrate toggle but sadly neither of the suggestions allow its use as such.
Click to expand...
Click to collapse
As the 8525 was eventually hacked for the PTT button to be useful you will have to be patient. This device is new so it takes time.
This works fine, load Vibra Switch, it will place 2 apps in the programs folder "Vibra Switch" and "Vibra Switch Delayed" (you can delete that one). Then in Settings>buttons> Select button 6, the top-left button currently used for single-press=Voice Speed Dial, press-and-hold=Recorder, re-assign the "press-n-hold button to be "Vibra Switch" and you are done.
I've been listing my tweak tries in amother thread, I can't get Bluetooth to redirect all sounds out to headset and I also can't get vjay lumos III to make the display go super bright. With no transreflective screen, this is now a very important tweak to me, I hope these can be figured out.
ahhhhh sweet. you guys are great!
-mix
RemE said:
This works fine, load Vibra Switch, it will place 2 apps in the programs folder "Vibra Switch" and "Vibra Switch Delayed" (you can delete that one). Then in Settings>buttons> Select button 6, the top-left button currently used for single-press=Voice Speed Dial, press-and-hold=Recorder, re-assign the "press-n-hold button to be "Vibra Switch" and you are done.
I've been listing my tweak tries in amother thread, I can't get Bluetooth to redirect all sounds out to headset and I also can't get vjay lumos III to make the display go super bright. With no transreflective screen, this is now a very important tweak to me, I hope these can be figured out.
Click to expand...
Click to collapse
Use a little app called "BTaudio toggle" it works good for me!
Love you spiro! Searched and found BTaudio.exe, Life is good! With my 8525 I had to use Mortscripts, this is easier. Pressing my Jawbone headset button launches VoiceDialer and kills the re-direct, but that's no big deal. I like that I can now launch Voicedialer.
Last tweak remaining is a single button toggle to BRIGHTEN the screen!
Vibra Switch not working
I installed Vibra Switch in my new Tilt but is working as described. Anyone knows why?
i'm not sure about the commands to switch to vibe mode ( i use phone suite) but to expose the PTT button (short and long)
try adding a couple of new reg keys 40C6 and 40C7 in HKLM/software/microsoft/shell/keys. mimic the the keys and values on 40C5 and then soft reset.... it will then show up in the button control panel.
for reference, this is where i got it...
http://forum.xda-developers.com/showthread.php?p=1577293
paulsuerth said:
i'm not sure about the commands to switch to vibe mode ( i use phone suite) but to expose the PTT button (short and long)
try adding a couple of new reg keys 40C6 and 40C7 in HKLM/software/microsoft/shell/keys. mimic the the keys and values on 40C5 and then soft reset.... it will then show up in the button control panel.
for reference, this is where i got it...
http://forum.xda-developers.com/showthread.php?p=1577293
Click to expand...
Click to collapse
Yes, I can confirm this works well. I've mapped a long press of my PTT button to Vibra Switch, so I just hold it down to toggle between ring and vibrate.
RemE said:
Last tweak remaining is a single button toggle to BRIGHTEN the screen!
Click to expand...
Click to collapse
I created a shortcut to the backlight application in /Windows/Programs and then mapped it to a button. A single push of that button brings up the backlight app, from there you can use the right directional button to increase brightness in steps. Biggest problem for me was adjusting brightness outside on a sunny day where the screen can not be seen - this fixes that for me.

Need Help with Vijay Lumos Workaround using HTC Home prog

With Kaiser not having a transreflective screen, I've really been missing the ability to map a key to toggle the screen brightness like I could with Vijay Lumos III on Hermes.
I don't use the HTC Home screen, but today I activated it and played with it some. I found that it has an app preloaded in the Launcher tab that toggles the display in 4 steps from Low to Hi and back. Using the add function I can see this application as "Adjust Backlight" along with most all of the other programs loaded on the unit.
I would like to create a shortcut link to this app and then map a hardkey to do this function, however for the life of me I can't find this program! I'm hoping that there is some kind soul that can help me locate this prog so that it can be used outside of the HTC Home Screen. I've been looking for a couple of hours and it's got me whipped.
In \Windows I found HH_Launcher Backlight.png which is the icon for the app.
Hopefully I'm not the only one who whould like to have this capability
bump.
Looking to do something like this as well.
found WkTASK (http://soft.photoracer.net/docs/wktask_en.html) which is a nice utility and is supposed to have a brightness and volume control. Everything BUT the brightness and volume control work on my tilt however.
Here's what I've done to work around this... using AE Button Plus, I've mapped the center dpad button ("enter") with standard behavior on single click, and I've mapped a press/hold to the "backlight" application. This brings up the app in settings that lets you set the brightness levels for "on battery" and "powered". Since it wakes up with the "on battery" section active, you then just have to use the "left/right" dpad buttons to turn the brightness up or down (and down/up flips between the battery and on power settings). Not quite a one-click fix, but a click of the center button, and a few of the right button will brighten your screen fairly easily.
The trick here was that AEBPlus didn't want to map directly to the backlight.exe file. When telling it to map the press/hold to an application, it simply didn't appear in the list (even thought I could see it in the directory). Perhaps it hides system files to keep you from accidentally doing something bad. So I had to make a shortcut to backlight.exe, then map AEBPlus to the shortcut.
Kind of a clunky workaround, but it works.

looking for two different cabs

Hello
I am a new owner of an att tilt. I believe it is the same as the tytnII. I am looking for two cabs to install on my phone.
1) a cab that lets me assign a button to switch between vibrate, silent, and ring. I found vibra switch, but it does not include silent.
2) a cab or program that allows me to assign a call log feature to a button. I use the call log quite frequently on my old phone.
Thank you for anyone that can give a newbie a suggestion
Adam
both of those can easily be accessed without cabs.
1- if you have the htc home screen, just press on the symbol that looks like a phone with a music symbol beside it, and it'll give you the option of switching profiles
2- just click the green talk button and then press up on the dpad
want the button press
Thank you for the response.
I have not tried htc homescreen yet. It appears to have a large clock and a tab system of the today screen that I am not fond of. Am I able to leave the today screen basically like it is with that program?
Also I want to be able to map these functions to a button. The reason for this is for easy access while driving. I feel a button press and using the jog wheel is a lot more accurate and requires less attention.
Thank you
Adam Birozy

Looking for WIFI toggles. Light on memory.

Is there a way to assign wifi toggle to a stock button by registry, or a simple button I can add to SPB mobile shell now screen to toggle wifi?
Yes, I searched for a while and didnt find a perfect fit...
Tried
------------------------------------------------------
AEButton Plus - slowed down phone
HButton - REALLY slowed down phone (almost unusable)
The search goes on.
Maybe WiFi Trigger is your solution? Works fine for me...
http://www.vijay555.com/?Releases:VJVolubilis
should work a treat
Wifi trigger OR vjvolubilis might work.. Now, how to bind either of those to a button. Any registry tweaks to bind an app to a button?
Can always open the keyboard and use the WiFi shortcut there? (fn + OK)
Or, check out Raiisak's WLAN cab in this topic... (He has some really cool stuff in there)
http://forum.xda-developers.com/showthread.php?t=398050
Link to the actual toggle:
http://forum.xda-developers.com/showpost.php?p=2307705&postcount=30
It works a treat with SPB Tools so I'd imagine it will work fine in SPB Shell too...
(Thanks again Raiisak!!)
I trigger my wifi using the press and hold send key. I use AEWifiTrigger and map the button using Shcap's tool.

Looking for simple Bluetooth on/off switch or button

Hiya,
I find it really annoying to go all the way to comm manager and switch bluetooth on when I jump in my car. (And face it, keeping bluetooth on drains battery like crazy)
I'm looking for a simple program that let's me switch between bluetooth "on" and "off" with a single touch. And it needs to be on the today screen or next to the windows/start button.
Anyone know such a program? Tnx in advance
kind regards,
Mark
I use this freeware for XPERIA here:
http://forum.xda-developers.com/showthread.php?t=439613
Works well for TouchPro.
I use bt toggle. You can put a shortcut in your start menu and you're two taps away from turning on/off bluetooth. Alternitavely, you can create a voice tag. It's a tiny program and it works great.
ribcage said:
I use bt toggle. You can put a shortcut in your start menu and you're two taps away from turning on/off bluetooth. Alternitavely, you can create a voice tag. It's a tiny program and it works great.
Click to expand...
Click to collapse
Haven't tried the others, but I stopped with this one. It's very cool, opens nothing and is literally one single press to turn it on.
I use SBSH PhoneWeaver, then I have big buttons for Phone, WiFi, Bluetooth and GPRS connection on/off right on the home screen (I don't use TF3D).
Found AEBPlus. It works great. Assigned pressing "hang up button" 3 times to switch bluetooth on/off. http://ae.inc.ru/aebplus.php And it doesn't use up that much memory.
i used to have the simple shortcuts to simple programs in my program tab
but if you download the diamond action screen it has shortcuts to texts, email, notes, tasks, wifi, bluetooth and others and its real simple i just put it as softkey on main menu
ribcage said:
I use bt toggle. You can put a shortcut in your start menu and you're two taps away from turning on/off bluetooth. Alternitavely, you can create a voice tag. It's a tiny program and it works great.
Click to expand...
Click to collapse
+1.... it works great. I created a link at the top of my Internet tab in TF3D
IT is the best
Infragno said:
Found AEBPlus. It works great. Assigned pressing "hang up button" 3 times to switch bluetooth on/off. http://ae.inc.ru/aebplus.php And it doesn't use up that much memory.
Click to expand...
Click to collapse
I try it is very good for every thing
Bluetooth on off
Wi Fi on of
Phone reboot , off , screen off
all buttons you have you can make it single press , double , triple , long
So you have for each button 4 function.
Thank you man for telling about this
I just have the HTC Action screen assigned to the left softkey. Pretty easy and fast
This exefile can do lot of things,mainly toggle between off/discoverable(all apps toggles only between on/off). It's enough just to write some commandline parameters into shortcut,while parameter "bsd" is for toggle off/discoverable.
Another thing I made,is the basehue changer while bluetooth is active,so while is off,all it's black,when any other state is,basehue changes to blue. It polls each second to get the state. It's a mortscript file,you can copy into the startup folder.
Enjoy.

Categories

Resources