hold comm to vibrate? - Tilt, TyTN II, MDA Vario III General

Anyone figured out how to map to a different button? This is the one feature i miss.
-mix

mixmaven said:
Anyone figured out how to map to a different button? This is the one feature i miss.
-mix
Click to expand...
Click to collapse
Does this work?

That is what I tried, but there isn't a comm button on the Kaiser... It didn't work on any of the buttons I found. Does anyone know the reg key? we could probably change it to the ok/close button instead. I emailed kyphur to see if he knows...
-mix

mixmaven said:
That is what I tried, but there isn't a comm button on the Kaiser... It didn't work on any of the buttons I found. Does anyone know the reg key? we could probably change it to the ok/close button instead. I emailed kyphur to see if he knows...
-mix
Click to expand...
Click to collapse
Use "Vibra Switch" then Do a seach its on XDA.

wpbear said:
Use "Vibra Switch" then Do a seach its on XDA.
Click to expand...
Click to collapse
I tried this, and it's a good concept, except the AT&T ROM doesn't expose PTT as a possible button mapping, which means one of the existing start/PIE/messaging/ok/camera buttons would have to be sacrificed for a vibe toggle.
The superfluous PTT button is the obvious candidate for a vibrate toggle but sadly neither of the suggestions allow its use as such.

niralisse said:
I tried this, and it's a good concept, except the AT&T ROM doesn't expose PTT as a possible button mapping, which means one of the existing start/PIE/messaging/ok/camera buttons would have to be sacrificed for a vibe toggle.
The superfluous PTT button is the obvious candidate for a vibrate toggle but sadly neither of the suggestions allow its use as such.
Click to expand...
Click to collapse
As the 8525 was eventually hacked for the PTT button to be useful you will have to be patient. This device is new so it takes time.

This works fine, load Vibra Switch, it will place 2 apps in the programs folder "Vibra Switch" and "Vibra Switch Delayed" (you can delete that one). Then in Settings>buttons> Select button 6, the top-left button currently used for single-press=Voice Speed Dial, press-and-hold=Recorder, re-assign the "press-n-hold button to be "Vibra Switch" and you are done.
I've been listing my tweak tries in amother thread, I can't get Bluetooth to redirect all sounds out to headset and I also can't get vjay lumos III to make the display go super bright. With no transreflective screen, this is now a very important tweak to me, I hope these can be figured out.

ahhhhh sweet. you guys are great!
-mix

RemE said:
This works fine, load Vibra Switch, it will place 2 apps in the programs folder "Vibra Switch" and "Vibra Switch Delayed" (you can delete that one). Then in Settings>buttons> Select button 6, the top-left button currently used for single-press=Voice Speed Dial, press-and-hold=Recorder, re-assign the "press-n-hold button to be "Vibra Switch" and you are done.
I've been listing my tweak tries in amother thread, I can't get Bluetooth to redirect all sounds out to headset and I also can't get vjay lumos III to make the display go super bright. With no transreflective screen, this is now a very important tweak to me, I hope these can be figured out.
Click to expand...
Click to collapse
Use a little app called "BTaudio toggle" it works good for me!

Love you spiro! Searched and found BTaudio.exe, Life is good! With my 8525 I had to use Mortscripts, this is easier. Pressing my Jawbone headset button launches VoiceDialer and kills the re-direct, but that's no big deal. I like that I can now launch Voicedialer.
Last tweak remaining is a single button toggle to BRIGHTEN the screen!

Vibra Switch not working
I installed Vibra Switch in my new Tilt but is working as described. Anyone knows why?

i'm not sure about the commands to switch to vibe mode ( i use phone suite) but to expose the PTT button (short and long)
try adding a couple of new reg keys 40C6 and 40C7 in HKLM/software/microsoft/shell/keys. mimic the the keys and values on 40C5 and then soft reset.... it will then show up in the button control panel.
for reference, this is where i got it...
http://forum.xda-developers.com/showthread.php?p=1577293

paulsuerth said:
i'm not sure about the commands to switch to vibe mode ( i use phone suite) but to expose the PTT button (short and long)
try adding a couple of new reg keys 40C6 and 40C7 in HKLM/software/microsoft/shell/keys. mimic the the keys and values on 40C5 and then soft reset.... it will then show up in the button control panel.
for reference, this is where i got it...
http://forum.xda-developers.com/showthread.php?p=1577293
Click to expand...
Click to collapse
Yes, I can confirm this works well. I've mapped a long press of my PTT button to Vibra Switch, so I just hold it down to toggle between ring and vibrate.

RemE said:
Last tweak remaining is a single button toggle to BRIGHTEN the screen!
Click to expand...
Click to collapse
I created a shortcut to the backlight application in /Windows/Programs and then mapped it to a button. A single push of that button brings up the backlight app, from there you can use the right directional button to increase brightness in steps. Biggest problem for me was adjusting brightness outside on a sunny day where the screen can not be seen - this fixes that for me.

Related

Need Help with Vijay Lumos Workaround using HTC Home prog

With Kaiser not having a transreflective screen, I've really been missing the ability to map a key to toggle the screen brightness like I could with Vijay Lumos III on Hermes.
I don't use the HTC Home screen, but today I activated it and played with it some. I found that it has an app preloaded in the Launcher tab that toggles the display in 4 steps from Low to Hi and back. Using the add function I can see this application as "Adjust Backlight" along with most all of the other programs loaded on the unit.
I would like to create a shortcut link to this app and then map a hardkey to do this function, however for the life of me I can't find this program! I'm hoping that there is some kind soul that can help me locate this prog so that it can be used outside of the HTC Home Screen. I've been looking for a couple of hours and it's got me whipped.
In \Windows I found HH_Launcher Backlight.png which is the icon for the app.
Hopefully I'm not the only one who whould like to have this capability
bump.
Looking to do something like this as well.
found WkTASK (http://soft.photoracer.net/docs/wktask_en.html) which is a nice utility and is supposed to have a brightness and volume control. Everything BUT the brightness and volume control work on my tilt however.
Here's what I've done to work around this... using AE Button Plus, I've mapped the center dpad button ("enter") with standard behavior on single click, and I've mapped a press/hold to the "backlight" application. This brings up the app in settings that lets you set the brightness levels for "on battery" and "powered". Since it wakes up with the "on battery" section active, you then just have to use the "left/right" dpad buttons to turn the brightness up or down (and down/up flips between the battery and on power settings). Not quite a one-click fix, but a click of the center button, and a few of the right button will brighten your screen fairly easily.
The trick here was that AEBPlus didn't want to map directly to the backlight.exe file. When telling it to map the press/hold to an application, it simply didn't appear in the list (even thought I could see it in the directory). Perhaps it hides system files to keep you from accidentally doing something bad. So I had to make a shortcut to backlight.exe, then map AEBPlus to the shortcut.
Kind of a clunky workaround, but it works.

I need someone to develop a program for the Kaiser

Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
aminhafez said:
Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
Click to expand...
Click to collapse
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
tomasz said:
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
Click to expand...
Click to collapse
Ok so how can I assign the mute/unmute to a hardware button as I can't find it in the settings--->buttons' drop down menu?
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
And if "hold" is a suitable alternative to mute, you don't have to do anything... pressing in the volume button toggles the call on/off hold. At least on my Tilt.
tomasz said:
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
AE Button worked well. Now I can mute/unmute at a touch of a button. I haven't tried its full potential yet.
Thanks for the great tip.
Still though I wouldn't mind a power feature like the Treo. I do not like that itty bitty recessed power botton on the right...
On a side note I'm going to try and see if there is a reg key on the Treo I can copy to the Kaiser where when you are in PIE and hold the action button it pops up the IE menu. That's nice. Not sure why its only on the Treo. I guess for it's one handed nature... What, I don't get to use my Kaiser with a one handed nature in mind?...
juiceppc said:
you are in PIE and hold the action button it pops up the IE menu.
Click to expand...
Click to collapse
Hmmm, that might be a useful map for AE button... for the side "ok" button, map a double-click to the left softkey, and press/hold to the right one (and single-click stock OK). Between that and the scroll wheel, that should make for some pretty easy one handed operation.
Just tested it.. works well, though the side OK button is a bit stiff/recessed to easily double-click with a thumb. May take some getting used to.
Hey guys,
I think i have found what your looking for. I also needed to toggle my Flight mode by a button because since most ROM versions of WM5 and WM6 Flight mode can`t be switched by tapping the signal meter at the top of the screen.
I installed this app and linked it to Button 6/Recording (Press & Hold) and now it switches Flight Mode On and Off. This is what i needed.
Look here: http://toosten.de/index.php?seite=sw&id=7
Have fun with it
One thing for now i noticed. When activating Flight Mode, it just turns off the Phone Signal and not BT when enabled. I am contacting the author of teh tool to see if some options can be added.

TomTom volume control

Hi all,
On my Kaiser, if I forget to unmute my phone before starting TomTom 6, I can't actually adjust my volume. The trick I used with my 8125 was to go to the Today screen and tap the volume control. On the Kaiser, touching the screen brings me back to tomtom, even if the today screen is displayed.
I remember finding a replacement exe for TomTom that unmuted the phone when it started and restored your former setting when you quit, but I can't find it even though I've searched for an hour. Help?
Thanks!
-n.
When I forget to turn on the volume, I slide open my Kaiser and press the Fn key together with the folder button (bottom right). From there, you're able to adjust the volume
But I guess it is indeed better if the volume gets adjusted automatically...
Stay0Puft said:
When I forget to turn on the volume, I slide open my Kaiser and press the Fn key together with the folder button (bottom right). From there, you're able to adjust the volume
Click to expand...
Click to collapse
??? wats the folder button???
XtreMe_G said:
??? wats the folder button???
Click to expand...
Click to collapse
It's that "Right Arrow" button. When you first press Fn (bottom left), all the blue symbols on your keyboard can be activated.
There is a blue icon of a folder on the Right Arrow key.
So press Fn and right arrow and you're in Windows again (and able to adjust the volume).
Then use your task manager to get back in TomTom.
Same problem for me with my Tilt. But, there's no folder icon on my keyboard to try your suggestion. The only way I've found is to exit TomTom, unmute the phone and start it again.
Anyone find a fix for use on the Tilt?
Stay0Puft said:
It's that "Right Arrow" button. When you first press Fn (bottom left), all the blue symbols on your keyboard can be activated.
There is a blue icon of a folder on the Right Arrow key.
So press Fn and right arrow and you're in Windows again (and able to adjust the volume).
Then use your task manager to get back in TomTom.
Click to expand...
Click to collapse
ah, i see, on the tilts, that key toggles wifi on/off
Found it!
http://www.aximsite.com/boards/gps-talk/140969-tomtom-6-volume-override-loader.html
This loader unmutes your phone when you launch tomtom, and restores your mute when you close. (it's smart about restoring the previous state, so it won't mute if you weren't muted before launching tomtom)
Incidentally, I have some useful links in my del.icio.us bookmarks tagged with 'windowsmobile'
http://del.icio.us/osunick/windowsmobile
(disclaimer: I'm a product manager on del.icio.us)
Hitting the phone "Hang up" button works to get back to the home screen.. you can then tap the TomTom icon bottom right to bring it back.
Fully
Have you tried this? Getting to the home screen is not the problem, it's that touching any part of the screen, including the volume control, puts you back in tomtom, thus making volume changes very difficult.
Is my Tilt different than your Tilt?
osunick said:
Have you tried this? Getting to the home screen is not the problem, it's that touching any part of the screen, including the volume control, puts you back in tomtom, thus making volume changes very difficult.
Click to expand...
Click to collapse
Im not sure what you guys talking about.
The FN + Arrow key works.
The hang up key works as well.
I have my windows key set as file explorer that works(perfectly).
Im usingTomTom 6. I cant recall my version.
When Im in TomTom and active my todays page. Tom Tom will minimize at bottom task bar. It lets me change just about anything.
Not sure why you guys has problem, maybe you need to install HTC taskmgr to solve this issue. Because most of my working program will minimize at bottom, so I can have fast access to it.
poisonz said:
Im not sure what you guys talking about.
The FN + Arrow key works.
The hang up key works as well.
I have my windows key set as file explorer that works(perfectly).
Im usingTomTom 6. I cant recall my version.
When Im in TomTom and active my todays page. Tom Tom will minimize at bottom task bar. It lets me change just about anything.
Not sure why you guys has problem, maybe you need to install HTC taskmgr to solve this issue. Because most of my working program will minimize at bottom, so I can have fast access to it.
Click to expand...
Click to collapse
This may depend on what build of Tomtom you have. As the OP says with some b uilds, even when you get to the tgoday screen using Fn buttons, the very next screen tap takes you back into tomtom.
However, as also pinted out above, pressing the red phone key works and you can then change the volume or any other task, BUT instead of returning to it using a Task Manager you just tap the tomtom icon that has appeared in the lower task bar.
Mike
mikechannon said:
This may depend on what build of Tomtom you have. As the OP says with some builds, even when you get to the tgoday screen using Fn buttons, the very next screen tap takes you back into tomtom.
However, as also pinted out above, pressing the red phone key works and you can then change the volume or any other task, BUT instead of returning to it using a Task Manager you just tap the tomtom icon that has appeared in the lower task bar.
Mike
Click to expand...
Click to collapse
My Tilt has the original AT&T ROM and I'm running TomTom 6.010.
The trick with the red phone key always minimizes TT6 to the lower task bar. But, I usually get dumped back into TT6 when I tap anywhere on the screen. Sometimes (rarely) it does let me unmute the speaker, but mostly not.
The Fn-arrow trick never works for me.
It's usually easier for me to quit TT6, turn on the speaker and then restart it. Of course, that means I have to wait for GPS to start up again.
mikechannon is right, some builds of tomtom allow you to change the volume once you are in the today screen, some builds will just bring you right back to tomtom with a tap on the taskbar.
for the builds that bring you back to tomtom on a screen tap, this is how i do it, hit ok or red phone button to get back to the today screen. when its at the today screen, i press the ie button to bring up ie, then you can tap on the volume icon on the taskbar.
and it doesnt have to be ie, can be just any app, you can even launch anything thats on the today screen, just as long as you dont tap on the taskbar
XtreMe_G said:
mikechannon is right, some builds of tomtom allow you to change the volume once you are in the today screen, some builds will just bring you right back to tomtom with a tap on the taskbar.
for the builds that bring you back to tomtom on a screen tap, this is how i do it, hit ok or red phone button to get back to the today screen. when its at the today screen, i press the ie button to bring up ie, then you can tap on the volume icon on the taskbar.
and it doesnt have to be ie, can be just any app, you can even launch anything thats on the today screen, just as long as you dont tap on the taskbar
Click to expand...
Click to collapse
Yes! Just tried that trick and it works great... thanks!!!
Anyone know if its the older or newer builds that allow the volume change to work properly?
You guys should really try that TTLoader app that i linked to earlier. It maxes out your volume and launches TomTom and restores your original volume settings when you leave.
osunick said:
You guys should really try that TTLoader app that i linked to earlier. It maxes out your volume and launches TomTom and restores your original volume settings when you leave.
Click to expand...
Click to collapse
I did consider using that app, but am trying to keep the number of running programs down as low as possible. I'm willing to jump through a hoop or two to accomplish that.
gavink said:
I did consider using that app, but am trying to keep the number of running programs down as low as possible. I'm willing to jump through a hoop or two to accomplish that.
Click to expand...
Click to collapse
It's a very lightweight app and doesn't actually take up space in your registry, so it has zero impact when not running and minimal impact when tomtom is running. You should try it.
osunick said:
It's a very lightweight app and doesn't actually take up space in your registry, so it has zero impact when not running and minimal impact when tomtom is running. You should try it.
Click to expand...
Click to collapse
Okay... you got me! I tried the loader and am hooked on it!
But, here's one for you. I've got a spot on my Today screen with TomTom on it (tap and the program starts). Any way you know of to get the loader to start instead? Maybe I'm missing something very easy?
Thanks!
Gavin
Sadly no, I use either Voice Command or the PTT button to start TomTom.
gavink said:
Okay... you got me! I tried the loader and am hooked on it!
But, here's one for you. I've got a spot on my Today screen with TomTom on it (tap and the program starts). Any way you know of to get the loader to start instead? Maybe I'm missing something very easy?
Thanks!
Gavin
Click to expand...
Click to collapse
Great little app, thanks.
Is there any chance of a cab install version ?
So it can be simply reinstalled when I change roms (which I do a lot).
Many thanks for this little app. It saves me getting frustrated, and having to tap on the screen while driving.
Many Thanks
Chris D.

[Resolved] Remap volume control buttons

Sorry if it was already covered elsewhere, - is there any way to remap auctions for these side buttons on Diamond ? I don't change volume level that often, all done through profiles, imho up/down arrow or scroll function would be much more beneficial ...
Update: AEButton Plus does the thing perfectly, thanks to Geekess for the hint
volume up/down is OK but long press may be very useful for Explorer, task manager etc...
In other words configurable .. would be great for camera too, not easy to make pictures with central button, not stable enough ...
I did not follow development news for previous HTCs, so not sure if it was ever done before ...the fact is that these buttons are not available from Settings (
You can use PQZ II for remapping the volume key. Try to google it.
csc0503 said:
You can use PQZ II for remapping the volume key. Try to google it.
Click to expand...
Click to collapse
thanks mate, you are a star
http://www.nicque.com/PQz/PQzII.htm
no version for diamond yet, will play with WM6 version tonight ...
hertc said:
will play with WM6 version tonight ...
Click to expand...
Click to collapse
well, does not look good at the end, maybe these are hidden features, but I could not find a way of how to use the volume buttons independently (they work as Ctrl or Alt, no problem here, but I wanted to use them as one button - one action, not two buttons - one action). Another problem, Up/Down or Scroll are not available for selection as actions ....
So it should be possible to change that, the matter of finding the right program now ..
Wish there were more buttons on Diamond, or at least proper navigation buttons ...
Hmm... for me it does not work, get the message:
keyboard hook faild
any suggestions?
What works for me is AEButton Plus (payware, no affiliation). I have reconfigured my volume buttons to single press = arrow up/down and long press to volume. The program has a nice function: you can choose to let the volume buttons have their default behavior during a phonecall.
I'm using the trial right now, but if I can't find a freeware program that has the same functionality I will probably buy this.
May I ask how you've gone on with AEButton? I'd be interested to hear your long(er) term experience of having used it as it sounds like exactly what I want/need.
Mathew
all good, does what it says, configured it once and just using since ..
Tried latest HButton 2.3, but think it is not compatible ... anyone else tried it?

looking for a simple button reconfigurator

Hello,
i'm looking for a replacement for AEBplus
I only need a few simple things:
left and right button - should rotate my screen, like it does when i open the keypad
ok button - task manager (or today screen from where i could start the taskmanager)
ok button (long press) - start an application
end call (long press) - lock the device (the you need to enter your password kind of lock)
What program other that AEB can do that and wont use as much CPU resources as AEB does?
you can just go to settings>buttons and assign either keft or right soft key to screen rotate, easiest way IMO
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
nurps said:
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
Click to expand...
Click to collapse
x1ButtonMapper, already tried that?
cheers
I use AEButon Plus on my X1a and I am thrilled with it. It doesn't have much (if any) negative effect on performance on mine.
Have you tried it on the X1?
Also for End Key there is a program called "Long Press End Key" I think. It is nice, and cooked into a lot of ROMs.
Hannigan174 said:
I use AEButon Plus on my X1a ...
Have you tried it on the X1?
Click to expand...
Click to collapse
hi m8, he's trying to replace it with an alternative app...as stated in #1
DrakenKorin said:
x1ButtonMapper, already tried that?
cheers
Click to expand...
Click to collapse
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Is there a way to change some of the keys directly in the registry?
nurps said:
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Click to expand...
Click to collapse
have a look here, didn't check, just searched (doing your homework btw...)
nurps said:
Is there a way to change some of the keys directly in the registry?
Click to expand...
Click to collapse
advanced config - menu (button) - more settings - key mappings
Mobile Magic doenst support the buttons i need. No longpress for End and no support for the OK button at all..that was the first program i tried.
To bad the options for the End key are grey in Advanced Conifg.
X1BC should allow for a lot more options than mx X1ButtonMapper. I think there is also a second application from the same author called X1BH or something. Check that out.
X1ButtonMapper is pretty lightweight actually. The most overhead involved will be by calling the script functionality but that is done asynchronous, meaning that X1ButtonMapper doesn't wait for the called application or script to finish - it just launches it.
I didn't remap the red and green phone buttons because they can't be easily remapped and I think they are central buttons which should keep their original functionality. I think remapping them will cause more bugs than you will gain functionality. With X1ButtonMapper you already gain enough options for the remaining keys (each with short and long press) which should be enough for most applications. You can also reassign the missing FN+key combos on the keyboard.
I did use the Tab key as Ctrl substitude because I think Tab is not important for Windows Mobile. It is substituted in most dialogs with the right/left keys so use these. You can get the original Tab function when pressing FN+Tab for the few situations where you really need it.
I am using X1ButtonMapper for a long time now and havn't had any stability issues - maybe that's the trade off for having less features.
X1Button manager somehow didnt react to my OK key. I allready have a standalone taskmanager mortscript could run but Ok didnt do anythink. Longpress of the softkeys to rotate the screen worked nicely though.
Longpress delay is a little longer than im used to but that not a big problem.
The longpress of the End key has allready a keylock function as standard setting (wich i find totally stupid because i turn the device of with the switch on top). There must be a registry setting that i could alter so it would run the password lock instead.
I will check into X1BC...
X1BC works thank you...and i like it much more than X1BM because i can setup everything to my likings, longpress timing, vibration on/off and wether i want a Control key replacement.
I could even use the panel key to lock my device if reprogramming of the end key button is not possible.
Does anyone know wich program i have to run to password lock my device? Maybe its possbile with mortscript..i should check that...

Categories

Resources