Keypad dialer lag - Tilt, TyTN II, MDA Vario III General

I often dial using the default touch screen keypad on my Tilt but it's really bad; it lags heavily between presses and if I go too quickly it iwll lose the intermettent presses. Any known solution?

...try without the skin ?

sebbes said:
...try without the skin ?
Click to expand...
Click to collapse
Which skin? I'm using what it came with.

Same problem here to. I saw the same problem with the hermes. Very anoing when u use a phone service that u have to enter serveral digits(code, bank accont etc)
Its probably not fixable

just disable the sound when clicking a button. This helps for me.

Yes that did it but you should not have to
Anyway thanx for the super info... Finaly i can type a number at a normal speed.
Thanx again

Bouloama said:
just disable the sound when clicking a button. This helps for me.
Click to expand...
Click to collapse
how do you do that? i checked all sounds and notifications
I have a full mute device , only cant find the sound settings for those buttons in the dialer , pretty annoing
thnx

start-settings-personal-phone-keypad

perfect , thnx
lag fixed for me

Sad sort of workaround but it works. Thanks.

Does this fix pressing buttons and it not responding? I use the beeps as confirmation that it actually responded...

Related

HTC dialer very very slow

Why is the HTC Dialer very very slow. When i press a number, it takes time to show on the screen. So, i cant dial a number quickly. I need to press every digit individually and wait till it shows on the screen.
Is this normal??
HELP
Hmz dunno, don't have this problem.
Turn the sounds off in the options menu in the Phone application. Set the Keypad to 'Off' and it will speed up. No sounds but much quicker!
amruths said:
Why is the HTC Dialer very very slow. When i press a number, it takes time to show on the screen. So, i cant dial a number quickly. I need to press every digit individually and wait till it shows on the screen.
Is this normal??
HELP
Click to expand...
Click to collapse
Disabling the smart dialing option increases the speed too (especially when you have many contacts stored).
open dialer -> menu -> smart dialing options -> deactivate
Greetz,
Hans Olo
It did speed up my dialer, but still not upto the mark. Isnt there a way to make it even more faster?
amruths said:
It did speed up my dialer, but still not upto the mark. Isnt there a way to make it even more faster?
Click to expand...
Click to collapse
Hi:
FWIW, my HTC keypad is very fast. I have both smart dialing and sounds turned on. Maybe you could try a hard reset. Is it possible that something you have installed is somehow affecting the dialers speed?
Hi dudes
I had the same problem but using your tweaks, especially disabling keypad sound, solved it. Thx
Ciao
i have same problem
but when disable sound
still slow
for those of you haveing issues still, did you ever install Vibra? Vibra was an app that allowed the user to quickly change to vibrate but use of a hardware key.
If so, this is the problem, it messes up all the sound settings which in turn causes issues with the dialer response times...
You can also try to disable the dialer theme:
[HKLM\Security\Phone\Skin]
Enabled = 0
Disabling sound solved the issue on my TyTNII, ,even with a quite huge contact database.
Thanks!
smittyofdhs said:
for those of you haveing issues still, did you ever install Vibra? Vibra was an app that allowed the user to quickly change to vibrate but use of a hardware key.
If so, this is the problem, it messes up all the sound settings which in turn causes issues with the dialer response times...
Click to expand...
Click to collapse
I had that problem, and that pesky program does not fix the registry even when you uninstall it. Luckily I had old registry backup and was able to look up the lines it messed with, and recover.
Gotta hate when little cabs like that can break your phone in such a bad way.
Lesson learned - always run registry backup before installing 3rd party apps and even Sprite Backup.

Dialer off right after end of call- HOW to do this??

Hi,
I've been looking for the answer but couldn't find any. This is very annoying for me.I use S2u2 and when I pick up an incoming call with a button or slider after the call the dialer is still on and Phone locks automatically(with dialer on). I have to unlock S2U2 close dialer and lock the phone again- this drives me crazy. Any solution will be appreciated.Thanks in advance for any help with this...
http://forum.xda-developers.com/showthread.php?t=450146&page=4 -ths doesn't work for me
Does really nobody drive this crazy?
pegaz said:
Does really nobody drive this crazy?
Click to expand...
Click to collapse
Me too..
But still no solution..
Yeah it annoys me too. I use S2U2 as well and I hate that both the dialer and the contact list don't close after I made a call or receive one. The registry solution from the other thread doesn't work with the TF3D dialer.
pegaz said:
Hi,
I've been looking for the answer but couldn't find any. This is very annoying for me.I use S2u2 and when I pick up an incoming call with a button or slider after the call the dialer is still on and Phone locks automatically(with dialer on). I have to unlock S2U2 close dialer and lock the phone again- this drives me crazy. Any solution will be appreciated.Thanks in advance for any help with this...
http://forum.xda-developers.com/showthread.php?t=450146&page=4 -ths doesn't work for me
Click to expand...
Click to collapse
Have you tried Advanced Config > Phone > End Call Delay? I haven't myself so I don't know if it's the time it takes to disconnect the call or the time it takes to close the dialer. Worth a try.
No, that's the time it takes for the phone to end your call after pressing the end-call button. Which is ridiculous, when I press the button I want to end it immediately .
I agree. Of what purpose could it possibly be to delay the end of the call?!? I mean if you could recover from accidentally hitting the end key that would be one thing. But you can't so any delay is just plain stupid AFAICT.
You can also use Advanced Config to turn off the silly animations and sounds at start up or shutdown. They also do little else but make start up and shutdown longer...
I've switched to the WM default dialer now, as was suggested in this thread, let's see if it it works for me. I liked the HTC dialer though .
HertogJanNL said:
I've switched to the WM default dialer now, as was suggested in this thread, let's see if it it works for me. I liked the HTC dialer though .
Click to expand...
Click to collapse
I've also tried that and it works but that's not a solution.WMs dialer sucks, keys are small and poor responsible for touch.Anyway I don't like WMs dialer. I don't understand why this reg tweak works with some roms but with some doesn't ;/. Hope it will be fixed in next official rom or somebody from XDA will find a solution for this annoying issue.As U guys sad when I press end button i wanna end immediately ,not in 5 sec!.
I now use the phonecanvas cab for my Diamond, so I don't have to use S2U2 anymore. But I believe this only works with the HTC dialer.
So does anyone have a solution for this problem? I really need it

"slide down for more options"

Hello, im using miri 8.1 premium and i want to remove the "slide down for more options" when i make a call... is this possible??
+1 i hate it!
+1, i really don't like it
yes! Me too, it is the most useless junk ever thought by the HTC ppl! It is annoying, please someone please help us remove it!
And why don't you ask miri for it in is thread instead opening a new one???
speed200 said:
And why don't you ask miri for it in is thread instead opening a new one???
Click to expand...
Click to collapse
Because its not just in Miri's rom, its in more or less all of them now
I want it back to my ROM badly. where is the cab?
+1
i also do not need it, and would like to know how to turn it off
+1.
Its a pain to mute/un-mute during conf calls with this on.
Anyone?
For those users interested to find a solution to disable the curtain, here is the package. Could be a dll or a registry key.
Found a solution
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
sank27 said:
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
Click to expand...
Click to collapse
Maybe you can set it to 0 (zero) to disable it?
kwbr said:
Maybe you can set it to 0 (zero) to disable it?
Click to expand...
Click to collapse
i tried that actually but it still show up
i also tried to delete the whole key "cover"
no luck
solaris10 said:
I want it back to my ROM badly. where is the cab?
Click to expand...
Click to collapse
Me too. any cab availabale?
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
contact managment sux on the standard one
and in-call options are better on the new ones
tiburone said:
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
Click to expand...
Click to collapse
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
Click to expand...
Click to collapse
I had zero issue with the standard one, it was functional and did exactly as one would expect. Topaz dialer hides all options instantly making it absolutely dangerous to try and activate loudspeaker whilst driving . The other issue is landscape view, if using any rotate screen app and having the device in landscape (ie. whilst using GPS apps etc) and receiving a call there is no dialer shown at all!
Surely I am not the only one to notice these problems?
thanks man it helped
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Click to expand...
Click to collapse
thank's. I'll try that - it looks ok.
But no i have a problem - remove the curtain...

Unfortunately hit "send"

Hallo
I'm tired of all the the time hitting "send" by mistake when I'm typing a sms.
Does there exist a tweak so you need to hold the send bottom in for a while for it to send? So you can't press it quick..
The right notice
I have suffered from this when using extra thingie to enter (exotic) estonian letters like äüöõšž and if the device slows down a bit there (it happened just few times) then I notice that I unfortunately have pressed Send because the softbutton just had another function
darfri said:
I have suffered from this when using extra thingie to enter (exotic) estonian letters like äüöõšž and if the device slows down a bit there (it happened just few times) then I notice that I unfortunately have pressed Send because the softbutton just had another function
Click to expand...
Click to collapse
So ? What is your solution ?
mysterd said:
So ? What is your solution ?
Click to expand...
Click to collapse
Turn off TF3D! ;O)
Better solution:
FingerKeyboard 2.1 (search in Forum)
1. You get a better keyboard.
2. If you want, the keyboard covers the windows bar including the button "Send". You have to tap the keyboard away to push "Send". Works like a charm.
Jim Coleman said:
Turn off TF3D! ;O)
Click to expand...
Click to collapse
I just can't see the point in this...
The problem is with the softkey bar... Why do you suggest turning off TF3D ?
Tatsch said:
Better solution:
FingerKeyboard 2.1 (search in Forum)
1. You get a better keyboard.
2. If you want, the keyboard covers the windows bar including the button "Send". You have to tap the keyboard away to push "Send". Works like a charm.
Click to expand...
Click to collapse
Interesting
Thanks for your help !
mysterd said:
So ? What is your solution ?
Click to expand...
Click to collapse
What is yours?
Don't use the 3DFO message. Simple as that.
I never use that, just the built in outlook to send text messages.
In fact I disabled the 3Dflo plugin in today and I'm using right now the standard today with all the plugins that I want.
rogeriopcf said:
Don't use the 3DFO message. Simple as that.
I never use that, just the built in outlook to send text messages.
Click to expand...
Click to collapse
And there, you don't have a windows bar with a "Send"-Button? Strange ...

[Q] Question regarding Dialer Pad "long tones" and how to change?

Hi All,
Can someone tell me how I can change my dialer from inputting "long tones" when dialing to "short tones"?
Example... When I call my bank to check my acct. balance and enter my ATM card number, it always gets read wrong because of the length of the dialer / number tone and I am never able to get it right.
My Samsung Omnia was like this as well but it had an option for either "long button press tone" or "short button press tone" and I cannot seem to find this option on my SGS.
Can anyone advise on this? Does anyone know what Im talking about?
Anyone? Does anyone know how to change this or if there is even an option to do so?
Use Dialer One (search the Market). There you set the tone interval in miliseconds (unders settings).
And believe me... You will never use the stock dialer anymore
c3p9 said:
Use Dialer One (search the Market). There you set the tone interval in miliseconds (unders settings).
And believe me... You will never use the stock dialer anymore
Click to expand...
Click to collapse
How does this work exactly? Does it actually automatically replace the stock dialer or does it need to be started seperately everytime you make a call?
I dont mind the stcok dialed otherwise but I just wish I could figure out how to shorten the tones when dialing the phone.
This also only happens when I am already IN a call. When I make the initial call there is no actual tone sounds like a regular push button phone. It makes little "bloop" sounds instead... (Im sure you know what I mean... LOL!)
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Nirvana388 said:
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Click to expand...
Click to collapse
I have just tried that and I will let you know my findings. Thats kind of weird that this is the only way to do this and that there is no setting for it.
Nirvana388 said:
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Click to expand...
Click to collapse
I have just tried that and I will let you know my findings. Thats kind of weird that this is the only way to do this and that there is no setting for it.
***EDIT*** Yes... This works but again it is awfully strange that there is no actual setting to switch this.
yiannisthegreek said:
How does this work exactly? Does it actually automatically replace the stock dialer or does it need to be started seperately everytime you make a call?
I dont mind the stcok dialed otherwise but I just wish I could figure out how to shorten the tones when dialing the phone.
This also only happens when I am already IN a call. When I make the initial call there is no actual tone sounds like a regular push button phone. It makes little "bloop" sounds instead... (Im sure you know what I mean... LOL!)
Click to expand...
Click to collapse
It replaces the original dialer (actually both can coexist). You just have to choose which icon to click. But I tell you. It's really a way better experience. Very customizable.

Categories

Resources