Database Develop

New Rom: Tmobile UK: BA_TMUK_14200_112_11300

http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
Seems to have appeared as the FINAL offical release from t-mobile for uk users.
I've not tried it yet but the number does seem to suggest it is a slightly lower version than the Dutch one
EDIT MDAIIIUser
Added to wiki

no surprises
build of 2003se identical to Dutch rom previously released:
version 4.21.1088 (build 15159.2.6.4)
Extended rom just hasth changed regional settings (english UK default)

Added to wiki

Still a lot of echo.
Can't pair my Motorola HS820, BA sees the HS820, but error on connecting.
Anyone a fix for the echo and for the BT problem?
Use 1.40 before, was less a problem compaired to 1.42
Please help.
Regards,
Max

Report Back - T-Mobile Rom.. One week or so on..
Hi All,
Wanted to feedback my impressions of the new 1.42 T-Mobile UK Spec Rom..
Well, it's been interesting.. I now have (or have had) most of the faults that everyone else is experiencing.. I never used to get them at all with the i-mate 1.40 Rom or the NL 1.42 T-Mobile Rom.. I have listed the bugs below..
1 - One Hard-reset when inserted into GPS Car holder
2 - Several occasions where I've "lost" the Storage Card (when serching for it on the device AND through Active Sync)
3 - Interesting situation where I've started TomTom5 and I've suddenly had to go through the set-up process again only to be told that there's no maps (Can only attribute this to an occasion where the Storage Card is not seen by the PPC - See above).. Solved by remove Programs, soft-reset then re-install off SD Card.. (quite annoying as I was lost at the time!)
4 - Occasional failure for BT Headset being recognised on an in-coming call (I use the Logi-Tech Pro).. Solved by Soft-reset..
5 - Sometimes, after soft-reset, get a low performance from the Device.. ie, after soft-reset and switching to phone where it takes a few seconds to "build" the phone screen..
Strange but as I mentioned above, I don't recall getting these bugs on the 1.42 NL Rom or the i-mate 1.40 Rom.. I might try a hard re-set on Monday then re-install my tomTom, etc to see if it carries on.. If it does, I MIGHT switch back to the either :shock:
That's it really.. I have had the early T-Mobile 1.06, the i-mate 1.40, T-Mobile NL 1.42 and T-Mobile GB 1.42 and finally the WM5 Roms and from what I've seen, I place them in this order of preference..
1 - i-Mate 1.40
2 - T-Mobile NL 1.42
3 - T-Mobile GB 1.42
4 - WM5
5 - T-Mobile GB 1.06

Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max

dazed and confused
sorry if I'm being simple but ....
I though this was the last offical rom
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
MA_TMUK_11300_128_11200_SHIP.exe
Rather than
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
How did you maanage to find the link?
What is the diference between the builds - How can I find a change log?
What is the BA / MA?
:?:

See here:
http://forum.xda-developers.com/viewtopic.php?t=31360

No difference in UK and NL Rom..?
[email protected] said:
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
Click to expand...
Click to collapse
Hi Max,
The Rom is exactly the same and the only difference is the changes in the extROM that makes it either UK or NL Spec (ie, MMS settings, etc)
Hi Starfish - Perhaps you need to look at this for the answers to your other questions:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Oh, and BA is "Blue Angel" and MA is the "Magician" HTC Names for the devices..

Sorry I did'nt read close enough Magican vs Blue angel

starfish_001 said:
Sorry I did'nt read close enough Magican vs Blue angel
Click to expand...
Click to collapse
That's ok.. We all have to start somewhere.. 8)
Now, I'm not too sure how far advanced you are in Upgrading, etc but before you do, please remember the following that I put on another post on here..
MrPhilly said:
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
Hope this helps..?
Cheers!
Click to expand...
Click to collapse

How can I upgrade to a stable rom
I have tried the TMobile NL and UK version both give the Country ID eror with the extra numbers 17-17-38-38-38
How can I safely upgrade to the 1.42 version (I have read the Getting Started With The Blue Angel) .
Is that the way to go?
"I get the password error on the xda3nbftool for the nbf segment"
I would like to get rid of all the phonesound failure and systemhangs with TomTom5.10
My Qtek9090
PH20B 0 B
WWE E
DANGA001
1.40.00 0 0
1.40.556
1.13.00 13.00

Upgraded to this from the last O2 update (my BA is an O2 Xda IIs), and while for the most part it works fine, now if the device turns the screen off for power-save while out and about, the GPRS connection drops. I know the hardware is capable of keeping the GPRS connection alive in such a situation because, well, it didn't drop it under the previous two O2 ROMs I ran.
Anyone else had this problem, or know a fix? Hopefully it's something simple that I've overlooked...
I'm getting better Bluetooth support with this (whether through actual improvements in the stack or through sheer dumb luck), so I'd prefer not to downgrade if I can avoid it.

Upgrade for NON OEM/Carrier Blue Angel
I have an unlocked OEM i-mate PDA2K. Because of this I am unable to install the T-Mobile upgrade to 1.42.
Is there a way to get around this?
I tried using the MaUpgradeUt_noID.exe, but I was unsuccessful.
Any ideas on how to upgrade a non-T-mobile branded blue angel?
Thanks

problems upgrading a non-t-mobile branded PD2K
BELOW IS THE SCREENSHOT OF THE ERROR

Did you make sure you had the MAUpdate file in the same directory as the actual upgrade had been uncompressed into? Since it's missing the RUU.DLL file that is part of that package.
Basically, get the files out of the real upgrade, then copy the MAUpdate into that directory, then run it instead.

I can not unzip or unpackaged the shipped OS
When I double click on the file, it runs the file, when you right-click and select extract, it gives you an error.
How do you unpackage the ship package?

Me, I used WinZip, I think it was.

Can not unrar or unzip setup files from exe package
the instructions states:
Unrar or unzip all files in exe or rar into a new folder. I get an error when I do that.
I also noticed that the instructions states:
First Method (Quick/Easy) (TYPE II), but there is another method Second Method (Slower/Harder) (TYPE I)
I am going to give that a try

O2 XDA IIs
Hi from Greece,
A friend bring me to Greece from Singapore one O2 XDA IIs but it has a old versions:
rom 1.31.00 wwe
rom date: 12/13/04
radio v:1.02.00
protocol version: 1337.32
ExtROM version: 1.31.920 wwe
sorry but I'm newbie here, can you tell me what (and where can i find) I must download in order to update to the latest versions.
I allready download the latest version from O2.UK for O2-XDA IIS but I do not want to lock my device to any network and that's the reason who asked you and I do not install this I allready download.
I allready see http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades but I don t now what I must download.
thk u

Wizard Radio Rom Only Updaters (Updated Topic)

Running this RUU will only update your Radio Rom. You will not lose any settings.
These are all in English.
2.x Radio Roms are for use with 2.x Bootloaders only.
They don't work with 1.x Bootloaders (IPL/SPL Versions 1.x). The good news is that since it doesn't dork your BootLoader if you goof you can still reflash with your original Rom and recover your device or use the Cingular 1.09.10 Radio Only Rom included here.
How To Use This RUU Package
1. Select the Radio Rom you want:v1.09.10 from Cingular 1.08 Rom.
v2.25.11 from the leaked Cingular 2.25 AKU 2.2 Rom. Several users have reported that this improves their reception.​v2.25.11 from the leaked Test T-Mobile (US) 2.24 AKU 2.3 Rom. It is also listed as version 2.25.11 but the file is not an exact match to the Cingular Radio Rom.
v2.07 from Summiter's Cingular 2.17 AKU 2 Rom, which was made using components extracted from a device with what is believed to be the mysterious Cingular 2.23 AKU 2.2 Rom.
v2.19.11 from the T-Mobile UK 2.21.0.206 Rom Release, for our European Brothers (and Sisters).
v2.19.11 from the T-Mobile Dutch Website, for our European Brothers (and Sisters).
v2.21.4 from the Xda Minis 2.24.4.101 Rom, for our European Brothers (and Sisters).
v2.27.11 Prodigy Radio Rom. As provided by ShogunMark.
​2. Download the Zip file.
3. Extract the contents into an empty folder on your PC.
4. Make sure you have established a usb connection with your device (Activesync as guest is okay)
5. Execute the RomUpdateUtility_Wizard_NoID.exe
6. Follow the prompts.
Don't worry it won't overwrite your existing Extended Rom, Storage Area or OS so the PDA side of your device will remain untouched.

Just wondering, isnt this the same radio rom thats in the new beta T-Mobile rom?
nickcerda said:
Just wondering, isnt this the same radio rom thats in the new beta T-Mobile rom?
Click to expand...
Click to collapse
Reply by Kyphur
The version number is the same but there have been numerous reports of better performance with the Radio Rom from the leaked Cingular Rom.
So the answer is Yes and No apparently.
If you're not experiencing noticable issues then why bother flashing it. On the other hand it certianly won't hurt to flash it.
Reply by Gamescan
Before I build the "Mr. Clean" AKU 2.3 ROM I did both a binary compare of the T-Mobile 2.25.11 Radio ROM and the Cingular 2.25.11 Radio ROM.
They are *different* files and do seemingly get different reception. In testing on a WIZA100 device, the Cingular version was noticeably better. I haven't gotten around to testing on the WIZA200 yet, but I'm expecting to see the same performance.
As a result of the tests, I included the Cingular version in "Mr. Clean" and kyphur was kind enough to package it separately after people asked for just the Radio ROM.

I downloaded and used the radio update from this thread with no problems it only updated the radio and left my settings intact.
Thanks for the file I need the improved reception
R

Thanks for the Rom, 4 bars at my desk where I used to have 1.... T-Mo Vario

Well, I just ran the ROMUpdateUtility_Wizard_NoID.exe and it completed the installation with my settings intact (in fact, the install only too a minute, whereas the full T-Mobile ROM took well over 5 minutes to complete).
My 8125 is running the AKU2.3 custom Cingular ROM that already had the T-Mo 02.25.11 Radio version. So, I don't have any absolute way to say that the Cingular 02.25.11 installed successfully, guess I'll have to test the signal now
Thanks for the updated Radio ROM

tokuro said:
i just updated my MDA (1.x ROM). it's no good and i had no radio working. I could not even connect via AS.
I booted my phone to bootloader and downgraded to 1.13 and all is ok.
Click to expand...
Click to collapse
Thanks for the report, I'll edit the Original Messege to reflect this.

Works OK on KJAM 2.16.9.1 stock
Hi there,
I installed Cingular radio 2.15.11 on K-JAM running stock latest image:
2.16.19.1.
It installed OK, works OK and so far reception seems better.
Thanks for all the effort providing that,
Hal.

gamescan said:
I know this goes against conventional thinking, but has anyone tried to flash this to a CID LOCKED device? I'm curious if it will work as it doesn't touch the OS or the bootloader. If it does work it'd be a must have upgrade for pretty much *everyone* out there.
My devices have long since been unlocked so I've got no way of testing it.
Click to expand...
Click to collapse
Yep it will work. It's really just the initial and secondary program loaders that are affected by the CID.

Thanks, Kyphur, for posting the Radio ROM
Installed w/o any problem, runs also very well
Cheers
hrb

cingular radio > tmobile radio
I've tried both and I noticed that the cingular is better. Why? Because with the tmobile one my push email would never sync properly on the mda. The cingular is fast and perfect. How fast you might ask? Well my mda receives the notice of new email faster than my Outlook client. But the original tmobile rom, my signal never dropped below 2 bars. The cingular drops 2 bars but that's 60% signal from the reading I get from Voice command. But I've talked for longer than 10 minutes on my phone and it's worked just fine. Kudos to Kyphur for sharing this with us.

gamescan said:
mengesb said:
Hey kyphur,
Well, Summiter put in the radio rom from Cingular's 2.25.11, and I tell yah, I'm still suffering from the same problems. the only choice I have left is the original 2.17 radio code, which I guess I'll have to try once I get around to seeing my home computer - been mobile for 3 days, haven't even seen my own grass... sigh ...
AKU2.3 Radio rom based on t-mo ... failed wifi on pre-n
AKU2.3 Radio w/Cingular 2.25.11 ... failed wifi on pre-n
MengesB w/no Wifi on pre-n ... pre-n failed MengesB!
Click to expand...
Click to collapse
Have you tried a different router? The one thought that pops to mind is that perhaps something in the firmware of the pre-n router isn't completely 802.11b compliant? After all, no 802.11n routers are final yet. It's quite possible there are still bugs on that end.
Click to expand...
Click to collapse
I know officially the stack on Q.11n isn't official, but the router is set to be compatiable with both G and B flavors of Q.11 sequences. What's more disturbing is that it was working with 1.8.11 WWE (stock). I know the firmware in the router is good, works with a Dell TruMobile Wifi, Moto G Wifi, Centrino internal Wifi, and Broadcom Wifi cards... so we've been around the block with Pre-n connecting on a G and B platform systems - it simply does not like my phone. I do have the G hack enabled through Sum Sum, and tried removing it - no difference.
I haven't tried other G routers, besides my SRX100 router, and even with this one its spotty at best - requies disable/enable occassionally when it 'loses touch' with the AP.
I'm wondering if 2 hours of ethereal logs might be required to find out where in the Q.11 stack stuff is messing up. Networking is my ball of wax, and it doesn't make sense to me if a device ARPs for an address, and the device REPLIES saying, "Yeah sure buddy, here you go: x.x.x.x" and the device simply IGNORES it ... kinda confuses me - like a Cisco 2600 that just came back from repair and the stupid idiot soldered a jumper cause 'it was loose'... ugh... numbskull

has anyone in california had good signal with the 2.21.4 radio rom??

ERROR 300 INVALID UPDATE TOOL
Hi,
I've a i-mate k-jam with English rom 2.16.9.1 and radio 02.07.10
When I try to upgrade the radio with the: Cingular_2.25.11_Radinly I received the following erro:
ERROR 300 INVALID UPDATE TOOL
Many thanks

Re: ERROR 300 INVALID UPDATE TOOL
gerard001 said:
Hi,
I've a i-mate k-jam with English rom 2.16.9.1 and radio 02.07.10
When I try to upgrade the radio with the: Cingular_2.25.11_Radinly I received the following erro:
ERROR 300 INVALID UPDATE TOOL
Many thanks
Click to expand...
Click to collapse
Is your phone CID Unlocked?

yes it is unlocked

similar problem....
I am on the imate rom: 2.16.9.1 WWE, radio 02.07.10
I have tried updating to the XDA MINI S Radio rom, and it seems to be succesful, however it still shows as radio rom 02.07.10
any ideas??

gerard001 said:
yes it is unlocked
Click to expand...
Click to collapse
Next question, are you extracting the contents of the zip file into an empty folder? might you have extracted into a folder containing an unhacked version of the updater program and by mistake running it instead of the NoID version?

I unpacked to a new folder.
I think the problem is with the rom that we already have installed that "maybe" is bloking the update ?

kyphur said:
This is the Radio Rom version 2.25.11 From the leaked Cingular 2.25 AKU 2.2 Rom. Several users have reported that this improves their reception.
Click to expand...
Click to collapse
Ok, well my problem has been fixed by using the cingular radio rom.
Successfully showing Radio Version: 02.25.11
maybe try that one gerard?

I will try it, but I think it's the same that I already used...
Thanks

WM6 in other language than English ?

Palm released the WM6-Update in English now.
How long will they need to release the update in other languages, for example German ?
I asked Palm but they even have no planned release date they could tell ....................

wuffi said:
Thank you for contacting Palm(tm) Technical Support.
Your case number is: X-XXXXXXXX
You ask when the Windows Mobile 6 upgrade will be available for the generic Treo 750.
Unfortunately we do not have a date for the release, but the "coming soon" shoul mean about a month.
Click to expand...
Click to collapse
So updates in other languages seem to be far away ....................

Vodafone Austria has just released the german update >>> www.a1.net/treo

Thanks for you info.
As far as i can see the update version is Treo750-2.18 carrier code VFD,
so Vodafone German.
I'll give it a try.
calico

pls, give us a feedback
calico said:
Thanks for you info.
As far as i can see the update version is Treo750-2.18 carrier code VFD,
so Vodafone German.
I'll give it a try.
calico
Click to expand...
Click to collapse
Can u give us a feedback on such things as:
Are the alternate symbols working, i.e. umlaute like ä,ö,ü with on click, or do u still have to hit the navkey three times down to choose them?
What kind of branding does this rom offer? A1 or Vodafone splashscreen for powering on and off the phone? Any waste of storage, like program links known from the att rom?
I am really looking forward reeding u'r experiences.

The only branding in this Rom is the Vodafone logo at startup and shutdown. No additional crap and apps like in the AT&T one.To get rid of the Vodafone logo you could make the Treo vanilla by deleting the extrom as described in other threads here.To get the Umlauts just press the alt key.

After the vanilla procedure
CC-Cap : 000-000-001
Carrier DB: 251
Free memory
Data: 54.65 MB
Programs: 28.53 MB
Firmware and OS-build are the same as in the English Vodafone-Version.
The Software-Version remains unchanged.

Well, I cannot update. When I start the original Update I'll get the error, that the update isn't for my device. I have a REGULAR Treo 750 not the Vodafone branded one. So I know it's not the "right" one. Where do I get a patched RUU.exe or something?
I expanded the Updater .exe-File and started the T750URT.exe and he Flashed a ROM, and as there's only one, namely CHEEIMG_FW.nbh I thought I would have WM 6 on it, but I didn't.
So can it be, that I have to unlock my device? Or is it an other problem?

To upgrade you can use the SD-card method described in this forum.
Or try this one:
- start the updater, stop at the first screen
- look at your temp directory, there is a new folder created
- edit the file "payloads.xml", in the section "carrier codes" replace the 3 letters with the letters you see on your treos system info
- go on with the updater (start update)
good luck
calico

have you tried to take the way with the Flashcard?
rename the Cheeimg_fw.nbh to cheeimg.nbh
format the SD-Card, copy file on it, reset while pressing the button below the volume-control and wait
A 750v (what you'll get - Imho) is not able to pull the Mailboxnumber from your Sim (if it's not a VF one) and it is not editable.
Can you imagine to make an Image of your original 750? Because it's german.

bezel said:
have you tried to take the way with the Flashcard?
rename the Cheeimg_fw.nbh to cheeimg.nbh
format the SD-Card, copy file on it, reset while pressing the button below the volume-control and wait
A 750v (what you'll get - Imho) is not able to pull the Mailboxnumber from your Sim (if it's not a VF one) and it is not editable.
Can you imagine to make an Image of your original 750? Because it's german.
Click to expand...
Click to collapse
If you tell me how, I would surely make an image of my treo 750 without V before upgrading to wm6. I would also love to have an backup, but i got no idea how to do it. And there's no Information in the Wiki.

hmm,
there must be some dump tools in the ftp area. I've never done this, so I can't tell you how to.

bezel said:
hmm,
there must be some dump tools in the ftp area. I've never done this, so I can't tell you how to.
Click to expand...
Click to collapse
Couldn't find anything on the FTP regarding Dumping a Treo ROM.
Will search buzz's site but if I can't find anything there and nobody can tell how to dump, I will upgrade without a previous dump.

upgrade succeeded
upgraded to austrian A1 (vodafone) image and got the following:
CE OS 5.2.1239 (Build 17746.0.2.4)
Software-Version: TREO750-1.14.VFD
Firmware-Version: 1.47.02.00
CC-Cap: VFG-VDE-013
everything is working fast and stable, sync with Vista and MDC 6.1 very fast, BT headphone Jabra 250 very good, UMTS/HSDPA with vodafone mobile flat very fast ...

OK, same for here:
upgraded to austrian A1 (vodafone) image and got the following:
CE OS 5.2.1239 (Build 17746.0.2.4)
Software-Version: TREO750-1.16-RWG
Firmware-Version: 1.47.02.00
CC-Cap: VFG-DEF-003
everything is working very fast and stable, sync with Vista and MDC 6.1 very fast
Will test BT-GPS-Mouse and navi tomorrow.

i explain in this post why put your treo wm6 in all lenaguages!
http://forum.xda-developers.com/showthread.php?t=331024

Treo official wm6 upgrade 2.23Row

http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_EN_DesktopUpdater.zip
The official unbranded releases. Release is this week according the dutch Palm Site. http://www.palmclub.nl/nieuws/28671...m-upgrade-beschikbaar-/-available-nieuws.html

this doesnt work om my treo 750...it says after you try and update that the update is not for my device, yet i am already running wm6???
also i had to extract the zip file with winrar as windows says its not valid...

frozenwaffles said:
this doesnt work om my treo 750...it says after you try and update that the update is not for my device, yet i am already running wm6???
also i had to extract the zip file with winrar as windows says its not valid...
Click to expand...
Click to collapse
Strange. Are you trying to update you're 750 or 750V? Because this is the unbranded update voor the Treo 750.
See also this site: http://www.pocketinfo.nl/nieuws/nie...om-update-beschikbaar-voor-palm-treo-750.html

i have a telstra 750 which has been updated to wm6 and had the ext rom deleted and then rebooted/cleared...so as far as i am aware, its a plan 750.
any ideas???

Won't work on my unlocked Cingular 750 either.

frozenwaffles said:
i have a telstra 750 which has been updated to wm6 and had the ext rom deleted and then rebooted/cleared...so as far as i am aware, its a plan 750.
any ideas???
Click to expand...
Click to collapse
Have you read this: http://forum.xda-developers.com/showthread.php?t=340226 ?
You problably have to first downgrade you're treo to wm5 before upgrading to the official wm6. I haven't test this rom upgrade because i already have upgraded it with the official wm6 vodafone upgrade for my treo 750V.

marco899 said:
Have you read this: http://forum.xda-developers.com/showthread.php?t=340226 ?
You problably have to first downgrade you're treo to wm5 before upgrading to the official wm6. I haven't test this rom upgrade because i already have upgraded it with the official wm6 vodafone upgrade for my treo 750V.
Click to expand...
Click to collapse
I just downgraded mine. I'm going to wait until I get to work and retry the ROW on a real laptop instead of my VM here at home.
Didn't work.

I just tried it with my AT&T Treo 750 (WM5 14959.2.3.2) and I got the "Unsupported Device Update".

mdonato said:
I just tried it with my AT&T Treo 750 (WM5 14959.2.3.2) and I got the "Unsupported Device Update".
Click to expand...
Click to collapse
Verry, verry strange. It's the official upgrade comfirmed by one of the mod's by pocketinfo and ROW stands for Rest of World.

Treo 750 WM6 upgrade
Thanks for the links. I tried the Italian upgrade and worked well.
Only problem seems to be Voice Command. Apparently it is not part of this ROM upgrade. Any idea why? Any possibility to install it afterward? Is not supported at all by the ROW upgrade?
Any advise is greatly appreciated
Robert

Problem to upgrade
I enter my serial number but the firewall of my bank rejected the download.
Unfortunately servers from palm registered my device and re-download seem to be impossible...
Does the direct link avoid this problem?
if not how to upgrade mine (my version is : TREO750-1.16-RWF)
Does the upgrade work on Vista ???
regards

It definetly works on Vista! Infact when I tried to upgrade my 750 1.15VFE on XP it gave me a script error and wouldn't run at all. I tried it on my laptop that was running Vista and bango it start the upgrade process.

I tried the latest ROW English update and got "Unsupported Device Update" also.
I followed the instructions here "HOW TO UPGRADE TO WM6"
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_WM6
Phone is running WM6 with no issues. My device still says i am running V 1.16-VFE as others have already mentioned,

jmerritt said:
I tried the latest ROW English update and got "Unsupported Device Update" also.
I followed the instructions here "HOW TO UPGRADE TO WM6"
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_WM6
Phone is running WM6 with no issues. My device still says i am running V 1.16-VFE as others have already mentioned,
Click to expand...
Click to collapse
The 1.16 change to 2.23 only takes place at the end of the upgrade cycle. After the first reboot, the upgrader explicitly states to press continue *only after* having recalibrated and setup activesync (guest mode is enough). That's when the last part of the upgrade kicks in.
It may be that in Vista this last part of the upgrade does nto take place.

i wonder if those of us using the cheeimg method end missing some features that do not get installed?!?!?

cingulartreo said:
i wonder if those of us using the cheeimg method end missing some features that do not get installed?!?!?
Click to expand...
Click to collapse
Palm support has explained the at&t delay by saying 7 ways upside and down, that when the upgrade is applied that it absolutely cannot be rolled back. Since those doing the cheeimg method have been successful at doing that and a radio upgrade for hermes radio i think i heard or something cannot be rolled back, maybe thats what they mean. If you do the full install it does one of these updates that locks it. But I'm just guesing

I am using the Palm Treo750 Cingular and got "Unsupported Device Update" message when I tried to upgrade the latest ROW English.
How can I do to upgrade? Thanks

contho said:
I am using the Palm Treo750 Cingular and got "Unsupported Device Update" message when I tried to upgrade the latest ROW English.
How can I do to upgrade? Thanks
Click to expand...
Click to collapse
I'm assuming you'd have to do the bootloader method described here. Otherwise you have to wait for the at&t rom to be released.

calico said:
To upgrade you can use the SD-card method described in this forum.
Or try this one:
- start the updater, stop at the first screen
- look at your temp directory, there is a new folder created
- edit the file "payloads.xml", in the section "carrier codes" replace the 3 letters with the letters you see on your treos system info
- go on with the updater (start update)
good luck
calico
Click to expand...
Click to collapse
This method also works, maybe you also have to change the version range listed.
good luck

ok that last tip worked a treat! i love this forum!
thanks to all who support it and give information!
did the instructions above andf all good, although i also change the version range low to '115' just incase...

HTC Upgrade to Windows Mobile 6 - ISSUES

OK, first post ..... treat me easy n slow!!
I have 15 years mobile experience, but not always technical. These days I am playing with my Samsung i600, Imate PDA2k, HTC K-Jam, N95 etc etc...
Anyway, here's my update on upgrading my K-Jam to Windows Mobile 6 - BTW (is WM6 Wizard Mobile or Windows Mobile)??
The story start with ipl 2.26 and spl 2.26 (and ends their)!!
When you restart the KJam check the ipl and spl - these are very very important (do not upgrade to 3.08 - this gave me real headaches).
Anyway, my device was probably already unlocked and CID unlocked, so after 2 days I think I could have upgraded in 20 mins ...
Moral is - try to upgrade first before following all the instructions on XDA-Developers. The file that worked for me was TNT.19199_professional_wizard
So, without trying the above which I bet would have worked first time, I downloaded many many ROMS and ran several - followed all the instructions and as per my i600 upgrade and got somewhere but didn't manage to complete - like for 2 days!!
Here's my issues list
1. Don't go IPL or SPL 3.08
SPL 3.08 is almost impossible to downgrade and you will keep getting to 98% or 99% without ever getting to 100%; that said I did manage to downgrade from IPL 1.05 / SPL 3.08 with LOKIWIZ / T-Mobile 2.26 (both posted several times)
1a. Lokiwiz - ISSUES
I ran this under XP and it wouldn't start. Trick was to login as admin user - then it did
Somewhere someone says copy enablerapi.cab to your HTC - I forgot after first time and it made a difference
Anyhow, I went 2.26,2.26 to 2.26, 1.01 to 3.08,3.08 to 3.08,1.01 to 3.08, 1.05 and then.... with enablerapi.cab loaded on HTC.... 2.26,2.26 by running the T-Mobile Rom.... then ran the TNT file above and now on Windows Mobile 6 .... Eiiiissssshhhhh (as they say in SA)....
Now,, does anyone know a nice WM6 interface??? my i600 looks very cute but the K-Jam is not so cool... anyone know where to view GUI pictures??
Hope the above helps for someone... truely I am not a geek, but not a dumbo either and it took me 2 days...
Great Forum BTW..
Cheers JA.

WM6 upgrade issues
I have 2 TMobile mda's. Have tried the TNT rom, and on the first mda, the itouch software caused the phone to freak out and not load several cab files, clocknot.exe, calnot.exe, and replog.exe. I had to flash and re-install the rom each time and the phone would work perfectly until the itouch software was activated, and then all of the problems would return. This actually allows the phone to go to sleep, and not wake up..which causes missed phone calls, missed texts....etc. Have you had this problem also?