Related
I purchased my TYTN II a week ago today, but did not get around to moving my sim over from my Trinity until last friday. when i did everything went well, it synced fine and i got all my data over from my Trin. It wasn't until i came to use the wifi that i noticed a problem! I turned on wifi in comm manager and it quickly found my router (British Telecom HomeHub). I launched IE and the HTC default page came up, so i changed it to google. Then i tried to go to one of the pages from my favorites, but all i get is a message saying "THIS PAGE CAN NOT BE FOUND" or it just times out! so i tried typing in the page and got the same result. So i checked the settings/connections/wifi and compared them to the settings on my Trin. Everthing was fine, though the Trin did have a stronger signal than the T II. So then i checked wireless Lan and all of the settings seemed o.k.
So today i called HTC u.k. to explain the problem, and to be honest the guy i spoke to was quite helpfull. they are going to investagate the problem and get back to me, i HOPE!
Has anyone else had this problem? if so could you please let me know asap so i can let HTC know i'm not the only one.
and one other thing, has anyone else had that stupid charger with there phone?
look forward to any replies
So, is the problem that one phone has a better WiFi signal than the other?
i wish
No it's not. it seems that the T II has a problem with the actual wireless radio, as it won't even download my emails through wifi
Either your WiFi radio isn't working, or you have a configuration issue. Config wise it could be any number of issues: proxy, router, security, etc. I mean, it could be a defective phone. but not knowing how proficient you are with networking, and it being a new phone to you, it could be config issue.
maybe
i did check all the conection settings next to my Trin, and all seems fine. there is another post here titled WIFI DOA i think maybe that guy may have a simular issue
Just FYI, my WiFi grabs email and access the NET, it does it all just fine.
I also switch between 2-5 routers per day and it latches onto every router with no intervention rom me.
reset
I've even done a H/R and numerous S/R and still no joy
If you are sure it is setup correctly, send it back for a replacement. I have no troubles with an almost OUT OF THE BOX setup.
I also have a problem with the wifi, sometime its work and other no response.
I can get the IP but I am not able to browse using IE.
when I am still using Eten M700 I naver have this problem, and i use it very often.
I never need to change the wifi setting.
The error message sounds like a proxy configuration issue. It might be that your router is running in a mode that needs you to set up a proxy, or it might be that you have a proxy configured on the PDA which is incorrect.
You can probably get more help here if you paste the exact configuration information from the PDA, and some configuration information from whatever computer you have and that connects correctly to the Internet through the router. Of course do not include the passwords ;-)
I had exactly the same problem with my new last week TyTN II.
I read this fix from another forum and my wifi now connects perfectly, displays any web page and downloads my emails.
Within settings go to connections, then wireless LAN, within W Lan go to power mode and change the settings from best battery to best performance.
All should now be well.
Guys,
I don't know if this is actually a cure yet, but it seems to have worked on my first attempt.
First the background...
When I first got my Kaiser (UK Orange Tytn II) I was at work, I quickly enabled the wifi and all was well. When I got back home later that day I really struggled to get a connection to my access point at home. I connect to a Cisco aironet in both locations (I know there is a post about cisco extensions but I know that is not my problem as I can and have connected to both APs on at least one occasion with no problem).
After deleting wireless settings and a few soft resets I was able to connect at home. I managed to use that wifi connection all night without a problem. Getting back into the office the next day resulted in the same problems connecting to the office access point.
The AP is visible and is 'Available' but doesn't connect automatically. I tried to establish the connection manually, the phone shows the AP as 'Connecting' but shortly after goes back to 'Available'.
I've tried flashing different roms and radios but to no avail.
Last night I got to thinking that I generally connect to my AP, browse the web, sync mail etc, but I don't switch off the wifi when I am finished. I just let the phone go into standby as that shuts the wifi off anyway. So to try something different last night, I disabled wifi once I had finished.
This morning, when I got into the office, I enabled wifi and for the first time it connected immediately and I'm browsing on it just fine. This leads me to believe that there is a problem when the wifi is enabled and the phone is is standby mode for a considerable length of time and then is woken up in a totally different location.
I'll test again tonight by disabling the wifi before I leave the office and hopefully I'll get an instant connection when I get home.
Any thoughts?
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
bluemamba said:
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
Click to expand...
Click to collapse
Of course that might be due to any number of factors. Have you ever been able to connect at your office?
i've had issues with my orange (uk) tytnII actually wanting to make a GPRS connection whilst connected to WiFi when i try and go online.
I connect at work using a program called Odyssey and eventually got that working yesterday, but had to turn off most other connectivity before it'd actually use the WiFi.
then I was at a pub later on with a free wifi hot spot, but that wouldn't connect despite it being 'available'
YAY!
Well...
I retested my theory. Disabled the wireless before I left the office. Got home, enabled it and I connected with no issues.
So there is a problem with having the wifi on when the phone goes into standby and it then waking up in a totally different location.
I wonder if WM6.1 addresses this. I hope so because although I have a work around, its still a pain in the a$$
I had similar problems on my Wizard... never had anything like that on my Kaiser.
DarkDvr said:
I had similar problems on my Wizard... never had anything like that on my Kaiser.
Click to expand...
Click to collapse
Could you tell me what radio you are using?
foobar1977 said:
Could you tell me what radio you are using?
Click to expand...
Click to collapse
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
DarkDvr said:
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
Click to expand...
Click to collapse
Thanks, I might give that a go when I get a chance.
My problem is similiar. If I connect to a certain access point, it will stop working after a minute or so and then not be able connect to that access point or any other one, they are just listed as available. Strange...
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Wi-fi connection
Hi unwired,
I've been surfing this site, but unable to find an answer yet, a newbie that I am. Is there a way to define one network as default? Anytime I want to connect, I have to do it manually, and define settins, rather than just switch it on, connect automatically and fire away. This is how it works on my laptop, or I have to high expectations from the Kaiser?
Thanks in advance.
unwired4 said:
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Click to expand...
Click to collapse
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
foobar1977 said:
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
Click to expand...
Click to collapse
I have had similar problems. I get disco'ed from my AP at home and it won't let me re-connect. Jut keeps asking for the WPA2 key.
I use the same remedy as you. Turn off Wifi Before walking out of range. No amount of Softreset's fix it for me.
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
P.S. This might also be tied to my router, cause a router reset fixes it for me. But i doubt work will let you try that
DaveShaw said:
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
Click to expand...
Click to collapse
Yeah I'm really hoping that this is fixed in WM6.1 which, if your experience is anything to go by, might well be the case. I really wanted to wait for the official 6.1, but I feel a flash of Duttys 6.1 coming on real soon.
Friends,
I've been proud of my TYTN II for the last thre months that I've owned it... until recently though.
Last week, my WiFi connection stopped getting activated/swichted on. Howsoever, I may try, it would not get activated, leave alone discover the network.
I tried re-flashing it, soft-resetting, hard-resetting, I mean practically everything I could, but to no avail.
Has anyone faced this problem before, and found a solution to the same. Would appreciate if you could share the same with me. I really do not want to take it for servicing, as I fear it would take me easily a week to get it back if I take it to the Workshop.
Thanks in advance,
Atul
Let me ask a couple of questions.
Can you turn wifi on or do you get an error?
If wifi turns on does it see any access points?
have you flashed your rom on your phone?
have you tried another access point for wifi?
do you have any wifi applications installed like wififofum?
Hi Chumley,
thanks for the prompt response...
I do not get any error, not even any message hen I try to activate the WiFi. Just that the rainbow circle keeps rotating (hour-glass equivalent of indows), and then shows the WiFi is still inactive (small x near the WiFi icon).
I tried re-flashig with the latest ROM available on the HTC website, but to no avail.
Trying another access point does not help either, neither would it, I guess, since its not a problem of signal strength, as much as it seems to be of the Wireless on the Kaiser not getting activated.
No 3rd party applications installed either, after the last re-flashing, still no luck.
Anything from the above, that rings a bell?
If it does it after a flash I would think you have a defective wireless adapater. Sorry.
Guess it should not be a problem as mine is still under warranty... just abt. 3 months old. But my only worry is, as I mentioned in the original post, the time it would tk. to get it fixed by the Service Centre, or if at all it is a correctible problem... I think time to ask for a favour from a friend... a standby mobile while I await mine back
If you let it go free and it comes back, then it's yours forever.
Hello, same problem here:
two days ago my wifi connection stopped suddenly and cannot activate it from the comm manager. When I click in the WIFI Icon, rainbow circle keeps rotating and PDA perfomance goes down.
any ideas :?
Hueznar,
I've already given mine for repair at Service Centre two days back, and am still awaiting it back.
Shall let you know how it goes once I get it back
WiFi would not activate: Motherboard concked off
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Oh My God !!
iatul4u said:
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Click to expand...
Click to collapse
@ Iatul
Are you sure this is the only reason & solution, for I have an IDENTICAL matter of the problem, but I never thought something was wrong with the HardWare..., damn I love HTC
I know I saw this thread too late (and finally) but if you please could respond with any news?
thanx
I'm not sure what is wrong with my Wifi...need help
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Harkadenn said:
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Click to expand...
Click to collapse
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
gelf said:
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
Click to expand...
Click to collapse
ssid? is this in the router menu?
So.. I tried what you said and didn't worked.
I think it has to be something set in the edit options...
Could you help me?
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
gelf said:
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
Click to expand...
Click to collapse
By changing it to channel 1 in my router, it kinda worked..
It says Available now. Nothing else... The connect option it still there button left.
That's my update.
just in case letting you know that I disabled all MEdia net and ISP GPRS so I won't get charged because I'm not paying for my onlince services or any mobile plan with internet.
My brother told me that all WIFI connects directly to internet and it won't matter if I don't have a plan for mobile.
Correct me here, if im wrong.
Thanks.
gelf said:
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
Click to expand...
Click to collapse
Thank you... already tried that... I think my problem is different.
Hello, I kept on making a post for it until Iread everything that Icould but I can t solve this.
I have a Continental European G1, radio 1.3xxxx.2005, and the UK version.
My problem is that WiFi isn't working on any ROM, cyan (3-4 versions of it, the last months of ROM's made by him), SenseHero, KingxROM, Dwang, and mannnnnyy other ROM, I think I tested like 40-60 ROM releases in the last two months and Wifi hangs on all of them. There are times when market is loading after 1-2 minutes, but that's it, no app works over WiFi, Google Sync after a new install of a ROM worked, but that was it again.
I have e DLink DI-524 Wireless G router, standard Settings(tryed with upnp enabled/disabled), w/o and with secured Wireless, it always detects the network, connects on it but it isn't working.
Another strange thing that happens:
Let's say that I have WAP2(PSK) protection on my router, I disconnect my G1 from it, remove the security, so now I have an open network, until restart my G1 detects my network in it's last state, protected. This is really pissing me off, I have 100mb free and 0.4Eur/10mb in my contract with Orange, but at home I would really like to use my wireless, e.g. to use Gmote and so on.
Does anyone has any idea?
THANKS A LOT!!
Is this a problem with your network or all wifi connections?
I had the same problem
After flashing more roms than I can count to try and see if I could get wifi to work. Even unrooted and went back to stock then back to rooted and still had no luck. I finally called my carrier and talked to there tech department and they said it was probably a hardware issue. I have since had it replaced under warranty. Sorry but I'm pretty sure its the hardware so no matter what rom you flash it won't work
This can't be real, hardware problem? I bought the phone from a friend from France, because here in Romania I would have to pay double for it at my carrier, so no warranty for me...
Does anyone else has the same problem??
Yesterday I tested SenseHero 's latest ROM, I act. WiFi and Google sync'ed but twitter won't.... I hope it's solvable, I started collecting logs, I see in my router that the phone connects through very weird ports to different sites on internet, have to look into that, sorry for grammar mistakes, not native english and writing from my g1. Bye
Twitter sync have always been an issue. It should work after a few tries. I have wifi hangs a lot too, and I dont have a data plan either.
if you can post a logcat, it would help us pin down the issue
I was in the process of creating my first theme(YIPPIII), but I will test it right now. IT's coming.
EDIT: Here is the log, so, during a 5 minutes time, I started wifi, and tryed to search xda on google, anyhow, that can be seen in the log and then tried to download a app from the market.
Hope it helps, I'm really stuck.
THANKS!!!
Does nobody knows smt? this thread is sitting here a while now, should I try reflashing everything? maybe the problem is in the "lower layers of hardware" , radio, spl???
Sorry i couldnt find too much in that log (its a little long and im usually sleepy)
but it seems as though its not routing properly
it seems to be connecting to the internet, but not routing. Do you have DNS settings on your router?
My router connects through PPPoE and the WAN connection has some DNS's but that shouldn't count, those DNS's are the routers problems, the internet 'thrown' in LAN and WiFi should be and it is without any dns's and such.extremely weird...
So ever since I've gotten my Nexus One I've been noticing it drops out of a WiFi way too often. It does it both at home and at work on Wireless routers using the latest firmware. I've set the sleep policy to never go to sleep but most of the times I wake my phone up, I'll find it on 3G instead of the full strength WiFi it should be on. On 2.1 when I'd go into WiFi settings it would show the connection and say something along the lines of "Connection unsuccessful, tap to try again" and on 2.2 it just says "Disabled, Secured by blah blah blah". If I retry, it ALWAYS connects and WiFi will stay active for a short period of time before falling back to 3G.
Is there some way I can tell Android to retry the WiFi connection if it fails instead of just giving up? I've been looking through the WiFi API's on the Android Developer site and I'm this close to writing an application that will attempt to mitigate this issue for me.
If I'm within range of one of my pre configured networks, I want the phone to try it's hardest to stay on WiFi. If it loses connection, retry. It it can't get it after 5 retries, wait five minutes and try it again, don't just give up and mark the connection as disabled.
I've read tons of threads about people with WiFi issues and people always say "it's the router, it's the channel, etc, etc" but my WiFi works perfectly fine as long as there is a human to reconnect it if it drops.
Anyone else in the same boat as me?
ok so apparently I'm the only one with an N1 and a WiFi issue.......
I have the same exact issues.
I have the same issue as well and if it stays on I have to turn wifi off and back on so it will connect properly
-------------------------------------
Sent via the XDA Tapatalk App
same issue here. i had been looking for an app that would force the connectivity, but the market doesn't seem to have it. just a bunch of crappy wifi on/off switcher management apps. i'm surprised that no one has hacked this function or built an app for it.
It's certainly a very annoying problem. Mine will go to known good wifi networks, at work, at home and at other locations where my other devices work flawlessly. I have a coworker with the exact same firmware (we updated using the same file) on a nexus one that has never seen this problem, which I find odd, but I'm fairly new to Android. It looks like a software or driver issue to me, but as I said, I'm new to Android.
My device shows the known networks as "Disabled", but I can connect manually.
Looks like it's worth me coding up an App to fix this then.
what kernel are you using? i used to have that problem but that has gone away with newer kernels. unfortunately a new problem has arisen where after being in standby for a while, wifi shows as connected but doesn't have an outside ip. wondering if its my rogers modem or not.
y2whisper said:
what kernel are you using? i used to have that problem but that has gone away with newer kernels. unfortunately a new problem has arisen where after being in standby for a while, wifi shows as connected but doesn't have an outside ip. wondering if its my rogers modem or not.
Click to expand...
Click to collapse
2.6.32.9-27220-g328f560
android-[email protected]#1
I've never tried a new kernel.. Is this something I should look into?
I'm running the same kernel.
BootsSiR said:
Looks like it's worth me coding up an App to fix this then.
Click to expand...
Click to collapse
Personally I wouldn't do any work towards writing an app to fix this since it looks to me to be an OS or driver issue that should be resolved in a future release (hopefully in very short order).
An app would really just be a band-aid, but I'm the lazy type and I can deal with using my cell ular data when I don't feel like reconnecting my wifi.
Full disclosure: I'm a crummy programmer and it takes me forever to write stuff so I'm usually less inclined to do it.
w9ndb said:
Personally I wouldn't do any work towards writing an app to fix this since it looks to me to be an OS or driver issue that should be resolved in a future release (hopefully in very short order).
An app would really just be a band-aid, but I'm the lazy type and I can deal with using my cell ular data when I don't feel like reconnecting my wifi.
Full disclosure: I'm a crummy programmer and it takes me forever to write stuff so I'm usually less inclined to do it.
Click to expand...
Click to collapse
I'd rather take the time to fix it then wait for an update that may never arrive. Always fun digging into the API anyways
That's cool. I still find it a bit troubling, though, that some devices see it and some don't, using the same firmware, on the same wireless networks.
I guess it could be a board rev. difference or an app conflict or something. ::shrugs::
I have a similar problem. I use APNdroid to keep cellular data off and use wifi, but I continually have to reconnect wifi no matter what if I am not actively using it. Defeats the purpose of push email.
I downloaded APNdroid after checking data usage and finding that with wifi on there was still significant 3G leakage. Especially confusing with wifi set to never sleep and plugged in overnight.
On the plus side, APNdroid has netted me a lot more battery life, I can almost get two days and one night. I almost never use my spare battery anymore.
Just as an additional data point, I am having the exact same issue with 2.2 FRF83 (I had been on FRF50).
It looks to me like it is simply scanning all of the time and never associating with a known network. I'm not sure why it flags them as "Disabled", however.
Have you guys tried to set the "wi-fi sleep policy" to "never"
if not, try this:
Wifi settings->menu->advanced->wifi sleep policy->Never
safeplayer22 said:
Have you guys tried to set the "wi-fi sleep policy" to "never"
if not, try this:
Wifi settings->menu->advanced->wifi sleep policy->Never
Click to expand...
Click to collapse
Yeah, it doesn't help, that was one of the first things I tried. Any time I leave and come back, the networks show as "Disabled". It's a frustrating issue in that it isn't consistant. It's 80% fail, 20% work.
I had my g1 for a year now and just now got my n1. I havent rooted it b/c of this bug. At first i couldnt listen online radio b/c as soon the display went out it would buffer the whole time. I played with the wifi router and the n1 wifi settings an managed to fix it somehow, BUT when i wake up in the morning for some od reason it lost connection and never reconnected again. So i can hear online radio with the display out but after some hours w/o online radio and just in standby it loses wifi connection and never connects again
This issue is not new. There is a thread on the google forum many pages long. Nobody hase even a clue where it could come from. Some1 on the forum said if u call support they will tell its ur routers fault.
The n1 completly ignores the sleep policy settings.
I have rooted two g1s with goldcard and still using one w/o a problem.
-------------------------------------
Sent via the XDA Tapatalk App
Zapo said:
I had my g1 for a year now and just now got my n1. I havent rooted it b/c of this bug. At first i couldnt listen online radio b/c as soon the display went out it would buffer the whole time. I played with the wifi router and the n1 wifi settings an managed to fix it somehow, BUT when i wake up in the morning for some od reason it lost connection and never reconnected again. So i can hear online radio with the display out but after some hours w/o online radio and just in standby it loses wifi connection and never connects again
This issue is not new. There is a thread on the google forum many pages long. Nobody hase even a clue where it could come from. Some1 on the forum said if u call support they will tell its ur routers fault.
The n1 completly ignores the sleep policy settings.
I have rooted two g1s with goldcard and still using one w/o a problem.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Well, I know fore a fact it's not my access point. I am a network engineer and worked on wireless systems for years and debugging these types of problems is something I'm a bit obsessive about. This stinks of a software or driver problem to me. It could potentially be a hardware revision issue since we have a N1 that works perfectly in all scanerios.
I've tested this with the following access points:
Apple Airport Extreme
Apple Airport Express
Meru
Cisco 1231
Cisco 350
Belkin pre-n
Linksys WRT54G stock
Linksys WRT54G dd-wrt (I forget the build number)
Soekris Engineering running pfSense
All exhibit the same behavior, while my control devices (Apple iPhone 3g, Apple Macbook Pro and a MyTouch 3g running Cyanogen 2.1).
I wasn't aware that this was related to rooting, I'd be more than happy to move back to a stock ROM if that solved my problem. Maybe I'll try that today if I get some time.
Could you possibly post a link to the google forum you're referencing?
I'm currently digging through the alogcat output to see if there is anything interesting in there.
This issue is worse since I upgraded to 83. I'm actually holding off to try CM6 when it comes out to see if there is any better performance there. I'm not sure if he uses updated drivers or kernel that may give better wifi performance.