Hi
I am missing the original CD that shipped with my AT&T Tilt Package. Would anyone be kind enough to upload the USB Modem drivers available on the CD please.
I have read the Wiki and I have looked over the forums for it, all I could find were the Vista Drivers for the same, but not the XP divers.
Thanks for looking.
do you have the latest version of Microsoft Activesync installed? If not, you should download it from Microsoft.com and it should be ready to sync.
I do not need ActiveSync
Hi
I already have ActiveSync 4.5 installed. HTC USB Modem drivers are different, they allow the kaiser to act as a dial-up modem that we can connect to a laptop computer.
Although we can use the 'Internet sharing option' in Kaiser for the same purpose, I just wanted to experiment with this alternative.
I am sure the drivers are available on the AT&T CD, I just need someone to upload it here.
IntShrUI
Hey, I have a Tilt too. I was messing around using the Tilt as a modem. I have the drivers, but I couldn't get the Tilt to dial right. I found on this forum a program called IntShrUI. It is in the Windows folder of your Tilt. Just run it and follow the onscreen instructions. You don't have to dial anything. Just plug the Tilt into your computer, click connect on the Tilt, and the internet is up. I can give you more info, I am looking for the thread. I can upload the drivers when I get home too if you want to go that route.
Thanks
Your method of connection is good, but I do not have a data plan. I guess it works if you have a data plan or something.
What I am doing is, I am making a voice call over the GSM network to a free dial-up number. The speeds are VERY slow, about 7-8kbps, but it does work.
Oh and if the number we dial isn't free, then we will be charged for the duration of the voice call. I know its low tech, but its free for me and it actually works.
Thanks for replying.
Sorry, I misunderstood. I used to do that too. Just making a data call to my ISP to get the internet. I will attach the drivers from my AT&T CD. The folder is labeled Vista, but I am pretty sure these are what I used and that they work with XP. I will test it when I figure out where my dumb USB cable went.
Thanks again
Thank you for the drivers jeff. After tinkering a lot with the WModem application, I believe that the HTC Kaiser cannot be used as a conventional dial up modem.
The only way to overcome this problem is to use 'Internet sharing' in Kaiser and specify a connection there itself. The only disadvantage here is, we cannot use the dial up services like NetZero that require us to use their custom dialers.
If anyone has a solution to this, please make a suggestion.
Has anyone tried the Vista 32bit driver on XP? Does it work?
Vista drivers do work
Yes, the Vista drivers work under xp. The kaiser is unrecognized as 'HTC USB modem'. However, as I pointed out earlier, the Kaiser does not behave like a conventional dial up modem. Only if you have GPRS, 3G etc. you can use this method.
I'm in the same boat. I couldn't get those drivers to load.
It's unreal that you can't find USB drivers for this phone anywhere on the Internet for XP.
internet
explorer82 said:
Your method of connection is good, but I do not have a data plan. I guess it works if you have a data plan or something.
What I am doing is, I am making a voice call over the GSM network to a free dial-up number. The speeds are VERY slow, about 7-8kbps, but it does work.
Oh and if the number we dial isn't free, then we will be charged for the duration of the voice call. I know its low tech, but its free for me and it actually works.
Thanks for replying.
Click to expand...
Click to collapse
i don't mean to criticize or anything, but you have a $400 phone, unlimited internet for the phone is like $20, why not just do that? or do pda unlimited for $50 and you get unlimited sms too, i just don't get shelling out a full paycheck for a phone and not the extra few bucks to optimize it
BenBoosted said:
I'm in the same boat. I couldn't get those drivers to load.
It's unreal that you can't find USB drivers for this phone anywhere on the Internet for XP.
Click to expand...
Click to collapse
I had no problem getting these drivers to work on Vista and XP. All you need to do is launch Internet Sharing while your phone is connected to the PC, and when the driver prompt comes up, point Windows to the folder where you stored the drivers.
Under Windows XP SP3, I do not even get prompted for drivers, everything loads automatically.
XP 8925(tilt) ICS usb driver
I'm trying to get my 8925(tilt) connected for ICS on my girlfriends' parents' computer running XP sp 1 via usb.
It tries installing a 'generic IRNDS' (something like that), but doesnt work. I couldn't find a working driver, even when I extracted the vista drivers to a folder and tried setting it as the driver for the 8925 in the device manager. All to no avail.
Does anyone know where I can find the XP driver for whatever usb device it would be consider for ICS?
i've got all the tethering plan yadda yadda, I just need it to work, the phone is faster w/ 3g than thier ... !dial-up!!!
Needless to say we watch a lot of Jurrasic Park on VHS in full Dolby Stereo at that household. ha, no really, i need some help with this. please holla back.
@explorer82: go to Start > Settings > Connections tab > Connections > Add a new modem connection.
Select "Cellular Line" as a modem, input the number, user, pass etc.
Than connect to your computer and activate ICS on your Tilt. This should do it.
@rubicant1982: as mentioned in the 2nd post, you need to install Activesync (free download from Microsoft) to be able to connect to Windows XP.
At&t tilt drivers for xp
Hello veryone!
I've lost my CD included in the AT&T TILT which includes the drivers.
I've search the web in order to find this driver compatible with my Windows XP computer, but unfortunatelly no one has up-loaded this program.
If any one has it, we will appreciate if you share it with us.
Regards,
Why it is not posible do download this driver ?
not working on xp sp3,need good working drivers for xp,anybody
all you need is active sync.
Thanks Buddy that worked - finally. phew
/S/
Related
After a hard reset on the TyTn my computer is no longer detecting it when I connect the phone to USB cable. The computer makes a sound when I connect it, but Windows Mobile Device Centrer say that TyTn II is not connected, and it does not show up in My Computer eather.
I've tryed to delete the partnership and reconnect the phone, but nothing happens.
Can anyone help me please! Now I cant install any of my programs og transfer files between the computer and the pocket pc/phone.
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
I uninstalled Windows Mobile Device Centrer and then tryed the tip you described here. At first it looked ok, my computer detected the device and installed the drivers and reinstalled Windows Mobile Device Centrer.
But my device is still not showing up in Windows Mobile Device Centrer or My Computer
Check your personal firewall settings and open the ports MS asks you to at the Windows Mobile home/support page...
Go into task manager & see if Activesync is running. I have the same problem with my tilt & if I kill activesync then reattach it takes a moment the first time, but then it works.
Make sure you are running the latest version of WMDC. I absolutely could not get WMDC to work with my HTC Wizard for months. After MS came out with an updated version of WMDC (around June, I think) it started working fine.
If you absolutely can't get it to work, consider using emoze for over the air syncing of cal, contacts, mail, etc. (or an on-line exchange account.) I had to do that for a few months until I got it to work. Emoze has the advantage of being free. Unfortunately, neither will allow file syncronization, tho.
There is no activesync running.
And everything was working just fine before my device went "mental" and I had to hard reset. So before the hard reset I could use WMDC on this computer, transfer files and run active sync. But now I cant.
I also got an online exchange account so I can sync calender and contacts. But I want to be albe to transfer files to my computer and install new software.
My WMDC version is: 6.1.6965
Some more info about the computer may help. For instance, I take it from your usage fo Windows Mobile Device Center that you are running Vista. In any case, since the problem is with the computer and not the Kaiser, I would see if the manufacturer would provide some support.
Yes, im running Vista and I buildt the PC my self.
But Im not sure its realy the PC that is the problem, because I made the changes (Hard Reset) to the device and thats what caused the problem.
Anyway, I was hoping for some way to debug/troubleshoot this problem.
I am having the same problem. I sync to any one of 8 computers at work and one at home. Work runs XP PRO and Home VISTA Ultimate x64 all worked fine untill this week. I have not made any changes since the last sync, the computers know it's hooked up due to activesync opening and trying to connect when I plug in via USB. But it never connects. I want to flash to Dutty's newest ROM but can't connect. I sync all contacts and e-mail wirelessly but need the computer to flash (I do not have a sd card yet) Any idead would be great! I have tried the ideas listed above but no joy. I have not hard reset the device as of yet ( I need some things off of it first)
Steve
BUMP
I really need help with this!!! I'm pulling my hair out!
Did any of you that had this problem find a solution? I have the exact same issue except a hard reset will fix it for a while, and then the problem will reoccur a few months later. No software has been added during the time frame. Very annoying.
i've got just the same problem! plaese help us!
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
lipanz said:
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
Click to expand...
Click to collapse
omg!
try activesync for XP. It came with the phone or you can download it from.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
Hi!
I'm having trouble using my tytn II as a modem in windows vista. I had no problems in windows xp but since i installed windows vista and use internet sharing application this is what happens:
I get connected and a new networkadapter (NDIS) is detected
I recieve a local ip-adress of 169.xxx...
This is making me crazy and i've searched the forum without beeing able to find anyone with the same problem...what am i doing wrong??
Any help will be greatly appreciated!
Thank you!
I understand, you use it with USB cable, may be using it with Bluetooth will be better, because in this case Windows will recognize it as a modem.
Please provide some more information about how did you make the configuration.
Did you make it as it was described in the user guide?
Hi!
I did make the configuration exactly as the manual describes it and my device is syncing correctly and everything. It even installs as a network driver when i use the internet sharing application. But it just wont give me an ip-address...
I've had this issue for over a month now and it feels like vista is blocking the service or something, but i just cant figure it out...
PLEASE advise!
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
No problems!
Hi guys.
Ive used this feature with vista with no problems at all..
Just turned internet sharing on and it connected to the network connection then vista aked me what kind of network it was (Home, Work Place etc) and hey presto it worked.
Mine is a T-Mobile Vario iii btw.
Never really had a problem either though it's much too slow compared to a "real" USB-3G/HDSPA-modem. (I max out at 1.2-1.8 mbit/s but when I use my dedicated modem I easilly reach 4 mbit/s)
megaman said:
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
Click to expand...
Click to collapse
Yeah this is killing me! I get the same as you, i get a IP-address but its a local one 169.xxx.xxx.xxx and vista says its a local ip-address...
I've started looking for services that may be stopped and such in Vista, but i still cant get it to work
I also can't get it to work, so if my WiFi goes out and i need internet, i just reboot to XP... Obviously not a solution, it's very annoying. I'd love to figure this out. I think my friend said he got it working, i should get details from him!
-Taylor
Guys, this is not the solution, BUT, until someone finds it, this is a awesome way to get around the problem! Just install the application, start it and tap connect. Now on your computer you'll find a new adhoc network using wifi, connect to it and your ready to go!
http://www.jongma.org/WMWifiRouter/
I'm a consultant and there is a cool invoice software for windows mobile 6
but most offices I go to don't have wifi so is there a way to use the pc's internet connection from a kaiser?
Thanks.
May want to do a search on that since its been posted many times already.
It's prety easy to tether a Tilt to a laptop, as long as it's NOT Vista. Vista is a pain in the ass. Anyway, on your Tit use the file explorer and go into the Windows folder. Look for a file called "Internet Sharing (2)". Hold your stylus down over it until the menu box popsup and select "copy". Now go into your Windows/Program folder and paste the shortcut there. Next, just go into your phone under Programs and find the shirtcut you just pasted. CLick on it. Now you'll see two boxes with drop-down menus to make selections. On the first one choose"USB", and on the second choose "Internet". Now connect your usb cable to your device and laptop. You'll see it start to recognize Activesync like normally, but now on your Tilt in that Internet Saring window the last thing to do is click "COnect" on the bottom. That's it. Actve sync will stop, and your lapop will take a moment o ecognize the new modem. Soon as thats down just openup a browser. TAH-DAH!
If you mean using the pc's conection on the device there are settings in active sync and wmdc which can enable it.
Which one are you using?
ronfin44 said:
It's prety easy to tether a Tilt to a laptop, as long as it's NOT Vista. Vista is a pain in the ass.
Click to expand...
Click to collapse
I'd like to know how to do it with Vista. I just picked up a new laptop and found this thread searching for exactly that. And I agree, Vista is a pain in the ass...
ronfin44 said:
It's prety easy to tether a Tilt to a laptop, as long as it's NOT Vista. Vista is a pain in the ass. Anyway, on your Tit use the file explorer and go into the Windows folder. Look for a file called "Internet Sharing (2)". Hold your stylus down over it until the menu box popsup and select "copy". Now go into your Windows/Program folder and paste the shortcut there. Next, just go into your phone under Programs and find the shirtcut you just pasted. CLick on it. Now you'll see two boxes with drop-down menus to make selections. On the first one choose"USB", and on the second choose "Internet". Now connect your usb cable to your device and laptop. You'll see it start to recognize Activesync like normally, but now on your Tilt in that Internet Saring window the last thing to do is click "COnect" on the bottom. That's it. Actve sync will stop, and your lapop will take a moment o ecognize the new modem. Soon as thats down just openup a browser. TAH-DAH!
Click to expand...
Click to collapse
does this work with vista?
rbade said:
I'd like to know how to do it with Vista. I just picked up a new laptop and found this thread searching for exactly that. And I agree, Vista is a pain in the ass...
Click to expand...
Click to collapse
Really? I haven't had any issues with Vista and my Tilt? What excatly are the problems encountered?
my first choice is usb or bluetooth pan i select usb then second choice is medianet or att gprs how do i get internet as a choice
Or read the original post...
He doesnt want to use the Kaiser's web connection on the pc... he wants to use the pc's connection on the Kaiser.
Just plug the device into the pc - then run windows update and it will download and install Windows Mobile Device Centre. Then set it up as a guest and you are good to go.
(I am still amazed that there are people who don't use Activesync/WMDC with the WM devices)
unwired4 said:
Or read the original post...
He doesnt want to use the Kaiser's web connection on the pc... he wants to use the pc's connection on the Kaiser.
Just plug the device into the pc - then run windows update and it will download and install Windows Mobile Device Centre. Then set it up as a guest and you are good to go.
(I am still amazed that there are people who don't use Activesync/WMDC with the WM devices)
Click to expand...
Click to collapse
I agree. This thread has been too confusing. Just install Activesync on Windows XP or WMDC on Vista. Connect the phone with USB cable and it will be able to access anything the the main PC can access
The only problem you can have are firewalls, the Wm device connects to IP 169.254.2.2 on the PC.
I have connected several PDAs with different ROMs to several computers, and it connects and sync always.
i answer this question all the time;
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
add that to your registry and it will work.
whats the difference of medianet and att isp gprs?
Hi, I thought I will give you my experience, my device have been active sync for more than a month, suddenly it refused to sync any more, I've checked every\thing on my notebook, redownloaded the Activesyn, repaired no way, I've just surfed the net and found the cure for that bur I still wonder how did it happen suddenly, most of you knows that there are two ways of sync's either RNDIS Syn Mode or USB Serial Sync Mode, I found this usefull utility by MS to solve this problem just download to your pda, reset your device and open the application and choose USB mode Viola !!!
http://www.utstar.com/pcd/downloads/AS-Cab.mode.doc.doc.
Happy Syncing !!!
http://www.utstar.com/pcd/downloads/AS-Cab.mode.doc.doc.
I also had to use this solution when I got my TILT last year.
No matter what I did my TILT would not successfully connect to any of my PC's with ActiveSync. After changing the mode to "USB Serial Sync Mode" everything worked fine.
However ... a friend recently gave me a BlackJackII to play with, and again I could not get the device to connect at all via USB + Activesync. I plugged the phone into his computer and waaa laaa! Activesync worked perfectly.
Not sure why I have so much trouble connecting to devices via RNDIS. I've gone through all the troubleshooting ... firewall, antivirus, blah blah blah...
No luck. Is a cab with similar functionality for WM Standard? or if it just changes something in the Registry ... what is the Key?
Proto732 said:
I also had to use this solution when I got my TILT last year.
No matter what I did my TILT would not successfully connect to any of my PC's with ActiveSync. After changing the mode to "USB Serial Sync Mode" everything worked fine.
However ... a friend recently gave me a BlackJackII to play with, and again I could not get the device to connect at all via USB + Activesync. I plugged the phone into his computer and waaa laaa! Activesync worked perfectly.
Not sure why I have so much trouble connecting to devices via RNDIS. I've gone through all the troubleshooting ... firewall, antivirus, blah blah blah...
No luck. Is a cab with similar functionality for WM Standard? or if it just changes something in the Registry ... what is the Key?
Click to expand...
Click to collapse
Actually this can be used for all WM but you have to use the latest ActiveSyn from MS (V 4.5), this is the utility which can overcome this no need of a cab or so.
Actually all my machines do have ActiveSync 4.5 build 5096,
and of course I tried to install the cab on the BlackJackII before I even posted ... but I get the message
"Installation of ActiveSyncMode.sa.cab was unsuccessfull. The installation file is not intended for this device."
Click to expand...
Click to collapse
So it doesn't work for WM Standard ... at least on a BlackJackII
anyone know how to setup windows firewall to sync with my tilt with vista?
GuySparkz said:
anyone know how to setup windows firewall to sync with my tilt with vista?
Click to expand...
Click to collapse
Anyone who uses "vista firewall" in the forum search soon will.
Hi,
I am getting a bit frustrated over this.
When I connect my X1 to my Vista x86 nothing happens (well the USB task tray icon show for about a second and vanishes again).
When I disable the "advanced option" in the USB/PC connection settings in the X1 I at least get a USB connection with something identified as "PocketPC USB Sync".
Any idea why this is happening and how I can get a real connection with the win mobile device center?
Thanks for helping me out!
Cheers,
Tillman
maybe give this a try:
http://modernnomads.info/wiki/index.php?page=Windows+Mobile+Device+Center+Troubleshooting
I've once had the issues of not able to connect my Windows Mobile device with vista too, and it can get very annoying.. good luck with it.
You might want to try and disable the firewall and then connect the device. I had this problem with Sygate Personal Firewall (sygate was bought by symantec and personal firewall is now terminated and no longer available)
Thanks for the quick response guys!
I already tried disabling the firewall (nod32) but that did not help.
Also checked all services - everything is peachy in that department.
But still - no connection.
When I switch back to "legacy mode" (disabling the advanced option in usb/pc settings on the device) then the device will tell me that I need to install active sync 4.5 or higher and wmdc still does not connect.
This is really strange...and annoying and the same time.
Any more ideas or any way for me to debug what's going on?
Thanks for you help!
Have you intalled "Windows Mobile Device Center 6.1" on your Vista-PC?
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
pf said:
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
Click to expand...
Click to collapse
Well sometimes the Mobile Device center could stuff up or not work due to some issues such as installation of Mobile Device Center 6.1 went wrong. I have experienced that I think I didn't follow the procedures correctly and things just wouldn't work. Eventually I had to do some uninstall and reinstall many times to finally get it working.
When I first plugged mine it it installed some drivers but didn't show up in the Mobile Device Center; unplugging and replugging in caused it to work...did you change settings in between plugging in for the second time?
What I have tried so far (and nothing worked):
Uninstall / reinstall WMDC
Uninstall / reinstall Win Mobile Remote Adapter (yes, this does show up once I am connected with "advanced" USB mode)
Uninstall / reinstall "PocketPC USB Sync" (shows when X1 is set to legacy USB mode)
When in "advanced" mode I can also see a new LAN connection showing up in network overview.
The same X1 on a different Vista 32bit right next to this one will connect just fine. So it's definitely about a driver or config thing with this Vista.
This is driving me...well you know what.
btw, you did try restarting your comp when performing some of those steps, and you did try different USB ports right?
I know that you had to ask.
Yes I did. I have rebooted the system several times in between all those reinstallation tasks.
By the way. When I am in USB legacy mode and reconnect the USB cable then the X1 will show a messagebox telling me that it's connecting with the host and that the user credentials / user account (having to translate here) are correct.
But still NO connection visible in WMDC.
I had the same problem with my X1. I assumed that because my HTC Diamond worked the X1 would as well.
I finally installed WMDC from the SE install cd, and bingo!! al good. Hope it works for you...
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
TillmanZ said:
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
Click to expand...
Click to collapse
maybe give event viewer a try and check under Windows Logs (not sure if it will be application or system tho)
just in case you aren't sure, in vista either type in "Event Viewer" in the start menu search bar, or type in "eventvwr"
Don't you just like vista?
That helped (to install SE's WMDC). The issue was that my HTC Universal was still connected to one USB port (for testing purposes since that device is not recognized either).
As soon as I unplugged the HTC I was able to complete the WMDC installation.
Unfortunately though it still won't connect to my X1.
Any more ideas?
what is your settings in Windows Mobile Device Center connection Settings?
Well here is my settings that is working with my x1:
Allow USB connections checked
Allow connections to "DMA"
This computer is connected to "Automatic" (this shouldn't matter)
Allow automatic device authentication checked
Allow data connection on device when connected to PC (this shouldn't matter either)
also, while this link was in the first link that I have posted for trouble shooting, just want to make sure you actually tried The offical Windows Mobile Device Center troubleshooting guide?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
namely these steps:
Quote"
If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
My device wasn’t connected during this installation.
While it is not a strict requirement that you have a device connected during the installation process of Windows Mobile Device Center, we highly recommend that you do.
"
I didn't have the DMA set (changed that now). Everything else already was like you described and it does not work.
This really freaks me out. I always hated my iTunes/iPhone connectivity but that honestly works much smoother. Of course I do understand that this behavior is non standard as I have experienced myself that the phone works with my other Vista machine but that does not really help me here.
Any update on this? I am having the same problem.
I'm having the _exact_ same problem too, but in Vista x64. I don't know why WMDC can be such a c**t sometimes, as I have never been able to 'sync' with my Media Center PC.
My only saving grace is that my laptop has Bluetooth, and syncing works great on it. I have never had success connecting the USB cable (with many options changed around of course) to either of these computers. Only Bluetooth syncing works for me...
Hopefully we can find the answer!
What USB cable are you using??? the one that came with Xperia??? Cos the one that came with my Xperia never worked out of the box, it could only charge...
I also got another extra cord which came in another box, that worked fine for both syncing and transferring data until today, now it says USB device not recognized, maybe I was trying the flash X1 with new ROM through SEUS, did the whole lower volume key and power button to get the 3 strips.
Now I am using the USB cable that came with my external HDD, that's currently working, hopefully it won't fail me.
so any ideas??? I don't want to keep changing cables...