need to downgrade to wm2003se,i have the rom and tried flashing.gives a country error used the MaUpgradeUt_noID tool.This isn't working. Please help tried searching for days.I am spending to much time on this I am a new mother I need to take care of my daughter not trying to get my device working all the time.I just want to call my family for christmas.Please help..
Try this
MAUpgradeUT_NOID.exe depends on specific dll's
try with attached package, just copy in the extracted package folder your NK.nbf WM2003SE image
or just extract it to your upgrade folder with replacing all the files inside
if you tryed to flash WM5/6 after the rom upgrade try to do a separate radio only upgrade (again radio_.nbf from the CDMA package)
Thank you for your help. I triied this it gave me a radio image file error while running the tool. Although the image i have is from the sprint carrier not a verizon carrier. My phone is verizon,that may be the problem. I don't quite know if I am doing this correctly.I copied the extracted files you attached then from within the folder run the tool or no. I really appreciate you helping but I feel very lost at this stuff.Especially when I mess with folders and files.Is there anyway I can take the rom off my husbands xv-6600 same phone also is under verizon network and reflash with that.
Related
I've extracted the nk.nbf file from O2's upgrade Rom, and have then extracted the following files:
80040000-OS_0.nb
9b000000-Extension.nb
96000000-GSM_0.nb
91000000-SPL_1.nb
etc...
Now i know that the cab files i want exist within the 9b000000-Extension.nb file (as i am guessing that this is the Extended Rom). But i can't figure out how to extract the cab files (or all the files) from within in it.
I've searched around, and it's helped me get this far, but i can't seem to figure out how to get past this point. Can anyone tell me how to do this on my PC.
Many thanks.
I know someone in here can give me a quick answer to this one. All i want to do is get some cab files out of an O2 extended rom file on my computer (i can't use the extended rom unlocker on my pocket pc because i am currently using the crossbow OS, which doesn't include the O2 extended rom).
Thanks for any help.
If you are using orwell's wm6 your extended rom is probably still on your phone unless you wiped it off.
look for a software called winimage & load the extrom.nb file then u will see the contents.
Greetings,
How could i extract nk.nbf from the underground WM6 rom.
Because it is needed for all Cid locked G4 and it will be helpful to everybody.
Can anybody tell me how to? I tried searching it but i didnt find any good answer.
Thanks
I think you can just right click and extract it.
You wont see it unless you are able to view hidden files.
You may have to change it from hidden to read only in order to use the file.
Hope im not spoiling anybody's secret.
Hope this helps you.
if you've downloaded a self-extracting exe you can in most cases just rename it to rar and then open the file. Otherwise just get the nk.nbf from the temp directory that the exe is extracted to...
208 error
do i need a seperate application to get NBD 8.3 to extract to phone keep getting 208 file in use error I am noob but succsefully sim and cid unlocked 8125 and have had severall different ROMs on phone. Flashed back to button love ipl/spl and then flashed TMO 2.26 rom and really want to try NBD's latest and hot new ROM any help greatly appreciated. the info on here made me think I had a grip on flashing until I hit this hurdle
This site and the chef's awsome
If you have been successfully uploading several ROMs before the NBD8.3 with the RUU works in the same way.
Included in the rar file there is also a readme explaining pretty much in detail how to run the RUU to install. Moreover you will also find some explaination on the different error codes.
You may want to download the rar file again and have a second try.
File error
Sorry bout that I was not extracting to a folder and then running the RUU that's how I kept getting the error Thanks for your help
it´s simple download the magic program called wizard service tool (WST) by mestrini, you have a icon named nbf actions, press extract nbf open the rom you want, choose the destiny folder and voilá, you have the nbf file extracted, after you haved to cook then! with all you want S.O. radio ipl or spl..
Hi all
got wings with wm6, and it's working fine except a problem that from time to time while using all sorts of programs the device decides to soft-reset itself.
not sure what program is causing this problem, and it might be the OS itself.
anyway I want to flash the device with other ROM's but in XDA-DEV ftp there's only the *.nbh file, and I cannot flash this file only (or at least I don't know how... )
I'd be glad if someone could point me to the RomUpdateUtility or even post an adrress here, because I've also checked to post of alcalaine and the supposed RUU there is only the *.exe file and I cannot replace the *.nbh file with the one I want.
Thanks in advance...
Tomer
It's included in a official rom.
See here: http://forum.xda-developers.com/showthread.php?t=395575
I've been having trouble with ".rar" files. I extract a file on my desktop, then transfer the file to my Tilt, where I try to activate it. I keep receiving a message to the tune of "this is not a valid mobile PC file." I have a HardSPL file on my phone. Am I missing something?
The RUU's that come inside the ROMs are to be flased from the PC, not on the Pocket PC! Run the RUU and it should extract the .nb which should ask for a few things and then you can update.
You need to unrar the files then Run the program that get extracted.
Actually in fact, before you do that, you need to spend a lot of time reading and learning before your turn your phone into an expensive paperweight.
I hope I not out of line here but I am about to go crazy. I have read the posts and I am completely lost at this point. I goal was to go from WM 6.1 to WM 6.5.
As per the Noob FAQ I flashed 3.29 on to my phone exactly as the directions stated no problem. After step 3 I did step 4 no problem. At this step is where I am stuck. I have tried to flash the rom vis activesync with no luck.
I run the RUU.exe and it runs fine ask me to update the flash from version 3.29 to 1.00. the files I downloaded the TPC_V11_KAISER_MANIILA.rar and the TPC_V11_KAISER_LOADED.rar and placed them in the same folder as the RUU.exe but not both at the same time.
I have done this step at least 4 times and nothing it is still at WM6.1. I am sure that i am doing some stupid newguy mistake or I am missing something but I am lost. If this is out of line I am sorry to the mods, I am just going crazy.
you are correct to place whatever image needs to be flashed in the same folder as the RUU before running the RUU. you are also correct about avoiding more than one ROM image being present next to the RUU before running the RUU.
the RAR files that you downloaded need to be extracted first (download, install, and use winrar for this purpose). once extracted, the ROM image contained in the RAR file is what should be placed in the same folder as the RUU.
...or you still have something other than the image of the desired ROM in the same folder as the RUU. perhaps the image for the HardSPL is still lurking around in that folder?
Yup you need to extract the rar files using winrar (latest version). It's a .nbh file that you need for the flash, in the same directory as the RUU.exe file.
Thanks guys what a stupid mistake on my end. I flashed the rom and it is working great. I really like this upgrade from my original WM6.1. The only thing I am missing is Office mobile. Thanks for the help
Here is PDACorner Office 2007