when I have programs opened using files in my sd ( dane-elec and sandisk ultra II , it doesn't matter) and I receive calls or radio interferences,the xda IIi crash and I have to do a soft reset...
i tried changing rom, but the problem persist!!!
..do you know a solution of my problem??
Probably down to your sd card.
some sd cards just dont work well with the xda2i
if you can get a trancsend or kingston card for it as they seem to work well with this phone
yup yup....i can feel the different after using Kingston....
HI!!!! I solved my problems with transcend sd 1gb 80x 8)
Hello,
I'm french and i'm not speack english very well.
I' have a problem with my 2020i. He don't recognize a new SD HC cards of 4 Go.
I don't no what I can do.
Please help me
Hi,it's an old model and i think SDHC card don't work on your pda .Otherwise you can buy simple SD 4 Go card .
Hi,
I have received my device today, and have flashed Hard-SPL already. Now I want to flash some cooked roms. This works just fine by using the CustomRUU (or the RUU provided with the rom), but is there also a way to flash without a RUU?
By entering the SPL there comes up a text "No Image file!", so I think the SPL is looking for any image files. I have tried to put them on a formatted SDHC card, but that didn't worked.
Is there some more magic I have to know about, or how can I flash a rom, without any kind of RUU.
Best regards
johnpatcher
well.....
with the diamond you drop your file on to internal storage (4gb)
enter bootloader and away you go.....hope this helps
Where on the internal storage do I have to put it, and must it carry any special name?
use file explorer
or with pc .....active sync phone
and open phone via pc and you should find it that way.
liamhere said:
or with pc .....active sync phone
Click to expand...
Click to collapse
I don't think that putting a 100MB file on my device via Active Sync is the right way ... .
well
thats how we have to do it on the diamond..... our roms are 60-90mg
good luck
just get rid of file once flashed ok
Ok, I have a solution: You have to format the card, and then put the nbh file on the card, while naming it "BLANCIMG.nbh".
Works just fine and is faster than through a RUU.
Just rename rom file to BLACIMG.NBH and put in fresh formated microSD card. Insert card in phone and start bootloader mode. Flashing will start, it's more faster and secure
indeed: BLACIMG.nbh in the root of the SD!
faster, safer: but you'll have to reboot your telephone by opening the battery cover, quite inconvenient if you do it many times per day...
Whats wrong with using an RUU? When I had my kaiser I used it all the time.
^^^ You're right mate
Hi
I want to ask any one success to flash HD from SD, what is the type of the SD included with your HD, and did you reformat it, or using another SDHC card to flash HD, and did any one can flash HD with Transcend 8GB ?
I get my HD with Transcend 8GB SDHC Class 4 and can't flash HD from it, I get "No Image Found" message
I format the card again Fat32 and try it but the same error
I try my old 2GB microsd and can flash HD but with Transcend 8GB can't
there is many report about this problem without any solution, any help
thx
For me it works just fine with the included SanDisk 8GB, but my 4GB Transcend doesn't work neither, so maybe its a Transcend thing .
johnpatcher said:
For me it works just fine with the included SanDisk 8GB, but my 4GB Transcend doesn't work neither, so maybe its a Transcend thing .
Click to expand...
Click to collapse
thank you for replay
but did you get Sandisk with your HD , HTC sale HD with deference items
any one can solve this problem, don't know but is there a boot sector in SD and can change it or modify it
thx
secoseco said:
but did you get Sandisk with your HD
Click to expand...
Click to collapse
Yeah, I looked it up once again, I have a SanDisk 8 GB microSDHC Class 2 (or at least there is a 2 in the right upper corner).
johnpatcher said:
Yeah, I looked it up once again, I have a SanDisk 8 GB microSDHC Class 2 (or at least there is a 2 in the right upper corner).
Click to expand...
Click to collapse
thank you
Class 6 does not work either
I have ADATA 8GB Class 6 MicroSD - does not work.
Sandisk 8GB Class 2 MicroSD - works.
Could be related to speed - not manufacturer...
http://forum.xda-developers.com/showthread.php?t=487632
An already existing thread... SanDisk doesn't work
deepakjohn said:
http://forum.xda-developers.com/showthread.php?t=487632
An already existing thread... SanDisk doesn't work
Click to expand...
Click to collapse
Think if you read that thread you'll realise that SanDisk does work, its Transcend sd card which doesn't (according to thread). SanDisk worked fine for me. Possible solution is to format SD Card to Fat32. Even if your SD Card already is Fat 32, try formatting it again.
hello! i have 2020i and i have a problem with it.
I'm buy this phone 3 days ago, so i have with him RS-MMC card and it work good with it. So, i have mini-sd with adapter for sd card and it's don't work on pda =/ I don't see him in tcm/file manager. I test other sd in the shop and it doesn't work to.
Is 2020i support sd card or i need buy rs-mmc?
What is problem with sd? mb need some update or drivers for device? Or some special sd card? Thanks for help
P.S. Sorry for my bad english, i'm from UA.
P.P.S. If u know russian - please better answer in this lang.
Yes, 2020i support SD. Are you sure that you have SD instead of SDHC?
I tested a lot of cards, but still found working The problem is that not all cards are suitable, that's all. By the way - i buy kingston and it work well.
Close topic please. Problem solved.
Ok so i bought this verbatim microSD 16gb class4...at first it worked fine on my xperia x8...but today it just decided to not be located at all...
On my pc the card is working properly with the card reader and i tried another sd on my x8, and it worked too..but the 16gb still wont be located...i tried everything from formating it to reboot etc...i tried the 16gb one on a x10mini but no luck either...
any recommendations?
oh and the shop said that they cant do anything cause this maybe my fault
Please help...
I had the same problem with 8gb class 4.
I did like what you did.
Finally it didn't work, I returnd it back to the store.
What I understood is: class 4 sd cards are not working on our x8.
because I asked the guys here and they were answering that they have a working sd cards on x8 but with classes like 2,8,10 not 4!
Sent from my X8 using xda premium
1Fawwaz thnx for your reply
but i could use it for about 2-3 days...and the same happened with an 8gb card but i dont remember of what class..
any ideas anyone?
[UPDATE]
After many experiments i found out that my card was working with thsd card adapter that SE provided once...the one that is like a usb stick...but with a MicroSD to SD adapter,my card wont be located by my pc...
[UPDATE 2]
The card is working fine on my sony ericsson yari.
also i read through the forum that others are using class 4 and its fine..so i cant see why mine wont work...come on guys..you have fixed far more complicated issues...
bakas666 said:
but with a MicroSD to SD adapter,my card wont be located by my pc
Click to expand...
Click to collapse
If the adapter you refer to is really a mSD to SD adapter then your PC would do the right thing(TM). To read a mSD you need a MicroSD to SDHC (<--!!!!) adapter.
SD, SDHC and SDXC are three totally different standards not really compatible to each other.
bakas666 said:
[UPDATE 2]
The card is working fine on my sony ericsson yari.
Click to expand...
Click to collapse
Then there you have your confirmation that the card is actually working.
If the X8 and X10 is refusing the card, then you may have hit a incompatibility (EDIT: that's why it is important to either straighten it out with the dealership that you can return the card in case it doesn't work or that you can try the card right there in front of the eyes of the shop dude). The only way would be to swap the card with one of another brand (like Kingston or SanDisk ... I wouldn't buy Verbatim crap).
In theory the X8 should be able to accept mSD's up to 32GB.
bakas666 said:
also i read through the forum that others are using class 4 and its fine..so i cant see why mine wont work...
Click to expand...
Click to collapse
True, I used a 8GB Kingston Class 4 mSD with my X8 - worked flawlessly.
thnx for your reply..
my card was working in the begining..so im not sure if this is really an incompatibility...
bakas666 said:
thnx for your reply..
my card was working in the begining..so im not sure if this is really an incompatibility...
Click to expand...
Click to collapse
Question is ...
- If you're running a custom ROM ... you tried another one?
- If you're running Stock ... you tried a custom ROM?
Also ... try putting the card into a _working_ mSD adapter and ERASE the partition that's on it. Then "Safely remove" the card reader / card from your PC and put the EMPTY (unpartitioned) card back into the phone. From there you have two options you can try ...
1. Try to partition and format (FAT32) the card in ClockworkMod recovery and see if it works now.
2. Boot up Android and format the card through Android (I think it's "Memory and Storage" in "Settings")
I tried with both stock and GingerDX...same result...im going to try this and post reply in some minutes..
nothing....i tried to partition with CWM..no luck....
I partitioned it with Partition Wizard..no luck again...
pfff...why it just denies to locate it?i was working just fine :S
I take CWM actually recognized the card even at its correct size.
The last thing you can do now is to look through logcat to see if the log holds any hints about why the card isn't recognized/mounted.
You better do that through adb as it's a medium pain in the rear to do that in the Terminal Emulator on the phone.
If you find something that could be related to the issue at hand post it here; maybe the error message carries something that would give a clue.