Is there any reason why this won't work on my Kaiser ?
Installed the CAB a few times, installs fine, but the nothing
Should work fine. Which one did you install? I've seen 2 versions. One that installs the link in the Programs folder and one that doesn't and you have to create one yourself.
If you don't see it in your Programs folder use File Explorer to browse the Windows directory for "HTCActionScreen"
Fixed
Thank you, found and corrected, I had the shortcutless version.
Help How do I un-install
please maybe you can help, how do I un-install the HTC Action screen it's nothing but a bother. Ive tried going to file manager and settings but the delete button is transparent there fore not useable. please help me
Related
I tried installing the customizer program, it installed fine but when i went to go run it, says that the htc home plug in not installed, when it prompts me to install it I say ok then it errors out.
have you tried installing htc home seperately?
Have you installed SDK Certs .cab?
goodness, where to begin.
1) This is not a ROM DEVELOPMENT issue, and as such should be posted in the Kaiser General forum, or at the very least in the software forum.
2) You haven't told us what rom, or what version of home is installed on your phone.
3) For that matter you didn't even tell us which version of htc home customizer you're using.
4) Wherever you got the program from would have been a much better place to post this question, we don't need a lot of additional redundant threads in here.
Anyway, you get my point i'm sure. Please observe the forum policies and search, read, and THEN post in the appropriate thread.
I agree with post #2, this is a simple fix...just install a htc home cab again, and the error will disappear
Jeez, did you bother to read what the HHC program told you???
This is a very easy to figure out issue.
HHC is based on OLDER cab type plugins, that put the graphic files in a folder in \HTCHome.
Cooked in newer versions place ALL FILES IN WINDOWS.
So either manualy move the HHC downloaded files to \windows or reinstall a older cab file version.
After updating HTC Home. The Font of my Comm Manager changed.
Does some1 know how to bring the original back??
I also tried to instal the 10 button comm manager but the font is still the same.
xmoo said:
After updating HTC Home. The Font of my Comm Manager changed.
Does some1 know how to bring the original back??
I also tried to instal the 10 button comm manager but the font is still the same.
Click to expand...
Click to collapse
Have you installed any SlovoEd dictionary? If yes... remove it because it causes problem to the fonts.
I had the same issue after starting Kaisertweak ... worked the second time after my next hard-reset
athanaso77 said:
Have you installed any SlovoEd dictionary? If yes... remove it because it causes problem to the fonts.
Click to expand...
Click to collapse
Nope, Don't know that program.
pencilcase said:
I had the same issue after starting Kaisertweak ... worked the second time after my next hard-reset
Click to expand...
Click to collapse
Hard reset :O
SPB Shell always changes the font on comm manager and kaisertweak on my kaiser. looked hard but could not find a solution on how to get it back. let me know if you find anything. tnx.
Hard Reset
Called the helpdesk and they didn't know as wel. So I made a hard reset. Now it works again.
Had the same problem when i installed a bible reader called e-sword. Found a solution:
In the Windows/Schriftarten (german) or Windows/fonts (should be the folder in WWE) there are normally no files in there. After installing the app there were three files in. I deleted the 3 files in the Windows/Fonts folder, closed the CommManager once (REAL close, don't forget) and started it again and voilà! Everything back to normal. No Hardrest needed
This happened to me the other day, after installing SPB Pocket Plus 4. It also managed to kill Tom Tom as well as screw with my fonts. I reinstalled TomTom though, and everything was OK again.
Same problem here.
I only see it in KaiserTweak, and SBSH Clock on the time console.
crawltochina said:
Had the same problem when i installed a bible reader called e-sword. Found a solution:
In the Windows/Schriftarten (german) or Windows/fonts (should be the folder in WWE) there are normally no files in there. After installing the app there were three files in. I deleted the 3 files in the Windows/Fonts folder, closed the CommManager once (REAL close, don't forget) and started it again and voilà! Everything back to normal. No Hardrest needed
Click to expand...
Click to collapse
Well my /Fonts folder was empty. So I had nothing to delete. The font change was in Comm manager + KaiserTweak.
Same thing over here
I am sure it is SPB Shell / SPB Tools 4 in my case. They both have a today plug-in that screws the font in comm manager and kaisertweak.
xmoo said:
Well my /Fonts folder was empty. So I had nothing to delete. The font change was in Comm manager + KaiserTweak.
Click to expand...
Click to collapse
Here's an easy fix if that happens, open up the fonts folder on your computer in the windows directory and copy the font called verdana in to the fonts folder in the windows directory on your phone, soft reset and after that you should be good again.
xeno1 said:
Here's an easy fix if that happens, open up the fonts folder on your computer in the windows directory and copy the font called verdana in to the fonts folder in the windows directory on your phone, soft reset and after that you should be good again.
Click to expand...
Click to collapse
Looool why coudn't you respone faster
Already hard-reseted it
danprodan said:
I am sure it is SPB Shell / SPB Tools 4 in my case. They both have a today plug-in that screws the font in comm manager and kaisertweak.
Click to expand...
Click to collapse
As I Already Said. I HAD NOTHING FROM SPB INSTALLED!
Tried copying the Veranda font as suggested ... but no go.
Same problem
Here is what KaiserTweak looks like ... see attached.
Any other suggestions would be most appreciated ... I only see this issue in a couple pieces of software. KaiserTweak, SBSH Clock ...
Same thing after installing WeatherPanel.
I experienced this after installing WeatherPanel. Went into \Program Files\Marsware\WeatherPanel\Themes\Default\
and deleted or renamed all *.ttf files. After a reboot everything went back to normal.
Hope this helps...
Proto732 said:
Tried copying the Veranda font as suggested ... but no go.
Same problem
Here is what KaiserTweak looks like ... see attached.
Any other suggestions would be most appreciated ... I only see this issue in a couple pieces of software. KaiserTweak, SBSH Clock ...
Click to expand...
Click to collapse
Damn that's very messedup. My font was cool and readable. Yours is fu up and not readable. I only think a Hard-reset would do the trick. Cause also installing other comm managers won't help you.
Also have the Comm Manager Font problem
I have the same problem. I installed a foreign language calendar, which put a font it needed into windows/font folder. Messed up Comm Mananger. The moment I removed the font, all was well.
Problem is that I need to use the foreign language calendar, which depends on the font!
Anyone know of a registry tweak to fix Comm Manager or otherwise allow the two to co-exist.
I don't think Comm Manager is using Verdana, so that doesn't seem to be the answer (although I haven't tried it yet).
Help from all the wise gurus out there would be appreciated.
bml5631 said:
I experienced this after installing WeatherPanel. Went into \Program Files\Marsware\WeatherPanel\Themes\Default\
and deleted or renamed all *.ttf files. After a reboot everything went back to normal.
Hope this helps...
Click to expand...
Click to collapse
AHHHHHHH! Thank you, thank you, thank you.
That was exactly the problem. I deleted the two TTF files and soft reset.
Thanks for the help!
Hello all. Just got my phone on Orange and I like it. I have been a Mac-user for the past 12 years so I am used to not tweaking my gadgets. Can someone explain how I install the CABs onto my Kaiser via either my G5 iMac or my intel Macbook. Many thanks
do'h not very sure, but you might want to try the missing sync, grab the latest version, it now supports win5 and 6. basically that's what you need to synch your mac and PDA, but not very sure if you can install 'em through it though
Now how do I find the installed CAB
OK I have downloaded a CAB onto the Kaiser via Missing Sync. (HTC album mui 0419.cab) So how do I now find it on the phone and activate it or any other CAB?
Thanks again
not that hard
I get that you're new, I am too, but try to figure this stuff out by yourself.
Bluetooth should work for getting files onto the phone (my docs/bluetooth)
When you sync to the phone, the PC version is that you see the phone on the schema/folder tree and can choose where to put it.
When you find the cab file, opening it will install it. Generally try to put system specific things on main memory and things like games on a storage card.
Look at some must have threads to find programs that you like and after you figure it out try a hard reset and reinstall things. That will let you keep a stable device.
As for ROMS, I would be careful of even thinking about flashing on a mac unless you find a thread telling you how to do it, you don't want a bricked device.
Remember to search the forums - it's worth your time.
Just mount the kaiser with missing sync. After that, drag and drop the file to a location that you can remember. Once you do that, just go to the file explorer in the kaiser, locate the file, and click. You should be all set.
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
from what I can remember, Missing Sync is really broken at the moment. (under 10.5).
To install a cab, you just use the tab next to syncronize, what is it, the file tab or somehing?
if it's a .cab, it will be loaded automatically. But make sure there's no spaces/irregular characters on the .cab, otherwise, it won't load the installation, and possibly, the file will not be uploaded at all. I think this is a missing sync bug.
Nope, you're going to have to pull the .CAB out of the .EXE file
jakontil said:
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
Click to expand...
Click to collapse
chenga said:
Nope, you're going to have to pull the .CAB out of the .EXE file
Click to expand...
Click to collapse
hi chenga, mind to point me how to do so? because i am going to lose my XP system very soon
I had installed all the components of Cube from the thread
http://forum.xda-developers.com/showthread.php?t=343583
The cube worked fine for me except whenever I soft reset my phone the quick dial screen would be the first screen available and not that HTC home which was the defualt screen
When I unistall all the components and restart the Phone I get a screen with the X mark at the top right corner and busy icon.When I cancel the screen I get the default HTC home screen. Is there some component still left even after uninstall.
My WIndows/startup/ has
poutlook
btdwake
VCDaemon
QuickDial(tried deleting it manually but did not allow)
Regards
What was the error when you tried deleting the QuickDial file? Did you use your PPC File explorer or did you try it via Windows Explorer?
Dr. Strangelove said:
What was the error when you tried deleting the QuickDial file? Did you use your PPC File explorer or did you try it via Windows Explorer?
Click to expand...
Click to collapse
The Error I get when I tried to deleted QuickDial is that it Sharing voilation.The source or destination maybe in use.I am using the file explorer
You need to terminate the 'Quickdail' process. Do that by using this tool:
http://www.4shared.com/file/39875406/cd2a63e3/Alltheway_Task_Manager.html
As you can see, Task Manager by AllTheWay.
Terminate the process using this file and then move the file from the startup folder. Move it, because you want to keep it somewhere safe if other programs/functions start to fail as a result of your actions. Or simply reinstall the Cube if additional problems should occur. Choice is up to you.
After moving or deleting the file, soft reset and see if that problem got fixed.
Good luck!
Hi,
Im quite new on this HTC phones.
I have a problem, I dont know how to install software on the diamond.
It opens the files in Opera but it will not start the installation.
Do I have to have any program to install programs on the phone?
I have been trying to install tomtom 7 but it will not work.
Best regards,
Martin
Look on the internet for a cab file of TT7 copy and paste this in your internall storage in the map programmables. Disconnect phone from usb go to the place where you put it and run it from there.
This should work probably.
Grtzzz
I have the same problem too, but only happened while installing .cab file.
Anyone can help? Thanks a lot.
It dosent work.
I found the file here on the forum, I did active sync with my computer, I took the file, moved it the the 4g internal storage of the phone.
I tryed to start it but nothing happens.
Thats the problem i have, it seems that my phone dont want to start the cab files.
Should I just click the file or should I do something else?
Normaly just clicking is enough.
Sorry but are you shure its a cab file its not rarred or zipped.
Have you allready installed other programs this way?
For cab files i do not use activesync to put them on the device i simply do it in storage mode.
Grtzzzz
I found the way, I had to make a soft reset. Then it worked!