Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one
and you're still waiting to publish it !!
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.
Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here
Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS
mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...
from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.
It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"
I need the password for this ROM... :roll:
Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???
I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here
off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available
freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?
Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.
Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)
As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.
i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.
ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks
Hello, my brohter present me his qtek 9090. It is a TMOBILE MDA III. It was in german and i downloaded a version in english the qtek 9090 windows mobile 2005 m2000. Now it is in english but i can not use the WIFI feature. In Settings/ System / ABOUT appears Windows Moile Version 5.0 OS 5.1.1700 (build 14343.0.0.0).
I donwloaded a few roms but all of them say that my pda is not compatible with that version. Can You help me????? Thank You Very Much
Did you read everything from this page?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
You have there ALL the information you would need about your problem.
BTW: you said nothing about what rom have you tried to install - I mean name (like Helmi 1.3.2, or Baniaczek R2 etc).
Thank you very much Jakudd for the reply of my message. I have tried all that you tell me. The rom i installed yesterday was;
Rom Windows Mobile 2005 Qtek 9090 Spv m2000 (the full name of the file). So i think i have installed the orange ROM. It was installed with the Tmobile ROM but i dont know wich ROM. When i har reset (power button + reset) the pda it apears something like that
R 1.13.00
N 1337.41
D 5.03.02 WWE
i have donwloaded 4 ROMs. I changed de BAupgrade por MAupgradenoid as i have seen in this forum. I use the MAupgrade, the computer says that is going to upgrade the pda but then, when i click in upgrade, the activesync turn off in the computer and the upgrade say that there is not any pda conected to the pc. I hope you to understand me what i want to say... sorry of my bad english.
Hello,
I have a qtek s110, and i want to update wm2003se to wm2005 or 6 its possible?
Best regards
Qtek S110
Hello, i also have this model. I want to upgrade the OS from Win 2003 SE to WM5, but i don't know if it's possible. I need some help. Thank you !
Hi ppl, im a newbie in this forum.
I have brought a Qtek 9090, and i have Windows Mobile 2003SE on my Qtek.
I need to find a ROM of Windows Mobile 2003SE (included on my qtek), becouse i will try to put WM5 or WM6 and, i need to have a backup of original ROM (Windows Mobile 2003) if i dont like the WM5 or WM6.
Anybody can help me? I search the internet but all links are broken, i really need my original ROM before upgrade, to downgrade if i dont like.
Sorry my bad english....:S
you can find here http://www.qtek.nl/9090_updates.asp or http://www.europe.htc.com/en/qtek9090/support/
cheers
indra9110
Sjogos said:
Hi ppl, im a newbie in this forum.
I have brought a Qtek 9090, and i have Windows Mobile 2003SE on my Qtek.
I need to find a ROM of Windows Mobile 2003SE (included on my qtek), becouse i will try to put WM5 or WM6 and, i need to have a backup of original ROM (Windows Mobile 2003) if i dont like the WM5 or WM6.
Anybody can help me? I search the internet but all links are broken, i really need my original ROM before upgrade, to downgrade if i dont like.
Sorry my bad english....:S
Click to expand...
Click to collapse
i hawe same problem but my qtek 9090 is in german leanguage now how can i got in enlish please
tnx
Thanks for this ...
man good work...
salam
I have pocket pc Hemalaya Qtek 2020 ; but i need Rom 2003
i setup Rom WM6 and WM5 i found same problem esp Cam
please give me Rom 2003
and thanks you for all memeber
im waiting
thanks
So would it not be better to post it in the RIGHT forum? the one above is for Himalaya & Andes i.e. Qtek 2020
NOT as this forum is for the Alpine i.e. the Qtek 2020i, there is a vast difference