Since installing the "fixed" version of Voice Command 1.6, which provides for Caller ID Announce, I have gotten this weird, almost unintelligible response from the Voice Command lady when I say "Call _____", for many of my contacts - I thought it was a different language at first, because she spoke so fast - it sounded like "Shelly to fawn" spoken really fast - weird, because most of the Voice Command responses are reasonably slow and articulate. I finally figured out that she is saying "Showing 2 Found", because she finds the named contact in the main memory and in the SIM contacts.
I have SIM contacts hidden, they don't show when I access Contacts, so I don't understand why Voice Command ("fixed") insists on accessing them. Before I installed the "fix", I used the standard Voice Command and Caller ID v1.05 by Bad Sector, and this did not occur.
Has anyone else experienced this anomaly?
SIM Contacts hidden in Contacts, but Voice Command still sees them, causing confusion
I posted this 5 days ago, and not a single reply. Wow.
Similar thread in Wizard forum - apparently this is an issue with WM6 and Voice Command:
dcdivenut said:
in this thread
I just tried to duplicate this and got the following...
When I said, "Call Joe Smith" and that person is on both sim card and contacts it will say, "Showing two (or more) found, call this Joe Smith?"
If I said no, it then put me into contacts and asked, "call Joe Smith at home or mobile?" So this is not a impossible situation but definitely a pain in the ass.
However, you are right, this is definitely something weird with WM6. I just never noticed it before. I actually occasionally switch phones so deleting #;s off the SIM really isn't an option for me.
Let's see what the real geniuses can figure out.
Click to expand...
Click to collapse
I am having this same problem on AT&T Tilt. SIM contacts are hidden, don't show in Contacts, but when I say "Call xxx", Voice Command says "Showing 2 Found" (says it so quickly that it took me dozens of listens to figure out what was being said - sounded like "Shelly2Fawn" or some other language when I first heard it.
I know I can delete all contacts on SIM and this issue will go away, but I'd like to have contacts on SIM, because I have a cheap backup phone that I want to be able to use PRN, e.g. go to beach, or in adverse weather situation.
cushcalc said:
Since installing the "fixed" version of Voice Command 1.6, which provides for Caller ID Announce, I have gotten this weird, almost unintelligible response from the Voice Command lady when I say "Call _____", for many of my contacts - I thought it was a different language at first, because she spoke so fast - it sounded like "Shelly to fawn" spoken really fast - weird, because most of the Voice Command responses are reasonably slow and articulate. I finally figured out that she is saying "Showing 2 Found", because she finds the named contact in the main memory and in the SIM contacts.
Click to expand...
Click to collapse
Sounds more like, to me, "please answer or not at home" through my Blueant Z9 via my Tilt when I get an incoming call. FWIW, no cooked ROMs, only the latest ATT ROM.
Duplicate contacts are what causes problem
MarkAtHome said:
Sounds more like, to me, "please answer or not at home" through my Blueant Z9 via my Tilt when I get an incoming call. FWIW, no cooked ROMs, only the latest ATT ROM.
Click to expand...
Click to collapse
I'm pretty sure she says "showing 2 found". This only happens if there is a duplicate in Contacts or on the SIM card.
I have a Tilt, and this also happens when I have multiple numbers in a single contact. I'll hear "Showing two found, call ***** at work/home/mobile?" and then a mic prompt (waiting for a yes or no).
I've also heard "Showing three found," but it's kind of rare... I guess most people that need three phone numbers are too intense for me to want to call.
to change the speed of Voice Command perform the following:
1. Start up your Registry Editor program.
2. Find the following:
- HKEY_CURRENT_USER\Software\Microsoft\Speech\Voices
3. Change the DefaultTTSRate string/value:
- 4 (default)
4. Increasing the number will increase the speed of the voice, while decreasing the number will slow it.
Then with your contacts, just rename them so you know who they are - example "Karen Jones" change to "Karen Work Jones".
Hope this helps you
Related
I decided to post this in a new thread. Sorry if it was the wrong thing to do.
I installed some of the cabs found here, specifically the HTC plugins
http://forum.xda-developers.com/showthread.php?t=326655
After performing the mods, the call history is not logging any calls to/from people that are in my fave 5 anymore. So I thought maybe the actual My Fav 5 program is logging the calls now, but no, it's not.
Anyone else experiencing this? The today screen plugin for missed calls does not increment by one when i have a missed call from someone in my fave 5, the call history does not log any of my fave 5 calls, and the My Faves program does not log them anymore either.
Any have any suggestions? What could have caused this problem? One of the HTC cabs I installed maybe?
Thank you in advance!
bump
I'm really stumped here. This is my last try to bump the thread up in hopes that someone has answer.
xsillence said:
I'm really stumped here. This is my last try to bump the thread up in hopes that someone has answer.
Click to expand...
Click to collapse
Can't tell you how to fix it so it logs.but just log into your mytmobile account, and add them there. If they're there but loggin still call tech support
layds10 said:
Can't tell you how to fix it so it logs.but just log into your mytmobile account, and add them there. If they're there but loggin still call tech support
Click to expand...
Click to collapse
hmm? My MyFaves is setup correctly. The problem is that my phone doesn't report/log any calls that are to or from people in my My Faves list. It reports/logs all other calls though.
I guess since all calls to myfaves people are free ... the phone doesn't register the calls or minutes used to those people so they aren't accounted for in any type of logs.
if you're running a custom rom, they wont be accounted for through any type on log on your phone
only way to track is through my-tmobile.com
I'm not running a custom ROM, just the HTC cabs and the pagepool hack.
It's disappointing because I don't know when someone from my My Fave 5 called me. It doesn't report it as a missed call! I'm not really trying to track the calls, I just want to be notified when I have a missed call.
xsillence said:
I'm not running a custom ROM, just the HTC cabs and the pagepool hack.
It's disappointing because I don't know when someone from my My Fave 5 called me. It doesn't report it as a missed call! I'm not really trying to track the calls, I just want to be notified when I have a missed call.
Click to expand...
Click to collapse
I have the exact same problem. I have installed the same things. NOTHING in the call history involving anyone on fave 5. A fix for this would be huge for me. If anyone in my fav 5 calls and doesn't leave a message, it never tells me I have a missed call, and it never shows in the history. VERY frustrating.
mikeybags said:
I have the exact same problem. I have installed the same things. NOTHING in the call history involving anyone on fave 5. A fix for this would be huge for me. If anyone in my fav 5 calls and doesn't leave a message, it never tells me I have a missed call, and it never shows in the history. VERY frustrating.
Click to expand...
Click to collapse
Yeah that's the problem! I can't even find the calls from within the actual My Fav Program. The only thing listed in the log section are the text messages.
Something happened and we could really use a fix!
I got somewhere... someone sent me a private message and explained that they removed the "+" sign from the contacts.
Well I've tried to remove the country code, the plus sign, and tried formatting the number is different ways. So far I have gotten the outgoing calls to be logged, but if you call the person using the htc favorite people plugin or the contact manager. Outgoing calls are still not logged when calling via the myfave program.
I keep trying different things. Would someone mind sharing the format of the numbers in their contact manager and then also the format of the numbers in the myfave program? Thanks
I just edited the my favs contact number directly from the contact program (not the my favs program) with ####### no spaces, it automatically reformatted it to (xxx)xxx-xxxx, and it logs both incoming and outgoing calls fine from the 5 tab favorite contact screen. I don't have touch flo installed just have the regular interface skinned with the 5 tab, Pocket CM contact list, the htc dialpad, and the htc new default theme. It took me a few mins just messing with the contact number to get it working, but once it works, it works.
nanek921 said:
I just edited the my favs contact number directly from the contact program (not the my favs program) with ####### no spaces, it automatically reformatted it to (xxx)xxx-xxxx, and it logs both incoming and outgoing calls fine from the 5 tab favorite contact screen. I don't have touch flo installed just have the regular interface skinned with the 5 tab, Pocket CM contact list, the htc dialpad, and the htc new default theme. It took me a few mins just messing with the contact number to get it working, but once it works, it works.
Click to expand...
Click to collapse
Ok..it seems to log outgoing calls that way....but no luck on incoming, what about missed calls? I seem to only have luck on it working when I dial them.
Also, when they call, their number shows up with their name and the "1(xxx)...." before it, even though the "1" isn't in the number in contacts. That probably has something to do with it...but I can't seem to fix that.
After editing them from my contacts, I still see they have the +1 in myfaves, which also seems to be having an effect.
For anyone that might know...
Is there a way I could just remove the myfaves application, which is probably a main cause of it not working right? I can just call them from my contacts or the home page contacts, which works for me if it means missed calls will show. So is it possible to just remove the application altogether? I assume it would still work because I could still access the numbers (and change them if necessary) online.
Welllllllllllllll.......
I went back, hard reset my wing, installed the stock t-mobile RUU. I then added things back one by one figuring I'd figure out which thing was causing my problem. It seems the pagepool is causing SOME problem (it doesn't NOTIFY me when I miss a call), but now even with everything I previously had installed, all calls show up in call history. I don't mind that it's not notifying me, as long as I can do a quick click into call history and see if I missed anything, so all is well now, I guess. I added my home phone # into my fav 5 (since I had an empty spot open anyway) and tested with that, calling back and forth over and over...it all seems to work fine. I'll be 100% sure when my gf or one of my friends calls me tomorrow, but it looks like I fixed it for now.
Start > Programs > myFaves > Menu > myFaves Settings > Refresh myFaves
If that doesn't solve your problems, log in to your My T-mobile account on the web and at least make sure you aren't getting charged regular minutes for your faves.
Oh, now I understand. Check out this:
MyFavs Missed Call Fix:
Registry: \HKLM\Security\Phone\NoLog
Key: List
Action: REMOVE
Which came from this AWESOME thread:
http://forum.xda-developers.com/showthread.php?t=360999
NS
Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
Hey all,
I've had my Kaiser a while now, and I love it to pieces. However...
When I open my SMS/MMS inbox, I see all my texts, but instead of showing the Name of the person who sent me a message, it shows there number (i.e +447870111111). This happens if I haven't pre-saved the contact to my phone (Even though the contacts were saved on my simcard). What's more, I thought copying all the contacts from my SIM to my phone would work, but no look. And now, I have 2 sets of all numbers! (one on SIM and one on Phone).
So My questions are:
Is there a way to have my SMS inbox show the contacts name, rather than number?
Is there a way to tell the Kaiser to hide my Sim Contacts, and just display my phone contacts.
I've searched and searched for these issues, but cannot find anything. I'm fairly technical so am usually good with these type of things. But any help would be appreciated.
Cheers
Scott
for the second question, use kaiser-tweak ...
there's a option under [contacts] where you can disable sim-contacts.
the other question i can't help, sry
bye andré
OK Cheers Edi, Anybody for question number one? Surely this issue affects others?
Just to confirm I'm not a jinx, can somebody else who experiences this issu please post?
bump.......
When you store a contact after receiving an SMS, the SMS database is not updated with the contact info and so the Inbox will show with the number alone! But after storing it once, the next SMS will be named with the Contact. This is how it happens in Windows Mobile or the way it handles the messages. The updating is not done in all SMS after a contact is stored as it would slow down the device.
Regards,
Carty..
Thanks for that Carty, now i know I'm not going insane!
It's a shame it has to be that way though... Standard mobile phones usually update themselves when you've saved the number as a contact. Ah well, I still have the best phone ever!
Cheers
Experiencing The Same Problem
Try to include the country code and for sure you'll have the name appear. Problem will be, when that person is calling from the same country... Country code will be omited. So you wouldn't see the name of the person who's calling... and vise versa
Did you find any solution?
Thanks,
Angelo
Audio said:
Hey all,
I've had my Kaiser a while now, and I love it to pieces. However...
When I open my SMS/MMS inbox, I see all my texts, but instead of showing the Name of the person who sent me a message, it shows there number (i.e +447870111111). This happens if I haven't pre-saved the contact to my phone (Even though the contacts were saved on my simcard). What's more, I thought copying all the contacts from my SIM to my phone would work, but no look. And now, I have 2 sets of all numbers! (one on SIM and one on Phone).
So My questions are:
Is there a way to have my SMS inbox show the contacts name, rather than number?
Is there a way to tell the Kaiser to hide my Sim Contacts, and just display my phone contacts.
I've searched and searched for these issues, but cannot find anything. I'm fairly technical so am usually good with these type of things. But any help would be appreciated.
Cheers
Scott
Click to expand...
Click to collapse
Apologies
I'm sorry. I guess my problem is different...
Audio said:
Thanks for that Carty, now i know I'm not going insane!
It's a shame it has to be that way though... Standard mobile phones usually update themselves when you've saved the number as a contact. Ah well, I still have the best phone ever!
Cheers
Click to expand...
Click to collapse
Wow this thread's a blast from the past
TBH I've not noticed the problem again, which could mean one of two things:
1) The problem has now gone after Flashing a WM6.1 ROM, or
2) I haven't had any "New" people send me a text.
Sorry I can't be of more help...
Hi,
I haven't had an issue with numbers showing on an SMS instead of names (as I store my numbers as +447976123456, but I did have a REALLY annoying issue with SMS delivery reports having the number instead of the name.
This would have been fine if I sent one text every now and then , but as a heavy texter it drove me nuts - never knowing whos message had been delivered.
Just in case anyone else is having trouble with this - try the attached file - it lets you change the format of the report you get when your SMS is delivered!
Cheers
Zippyioa
Anyone have a shortcut for enabling call forwarding? I always forward to the same number. I would like to be able to use a button or voice command to bring up the call forwarding screen, and then just click yes/OK to enable or disable it. Anyone else using this?
By the way. I have been using ATT's fast forward service for a couple of years. Do I need to continue paying for this, or will the phone redirect the calls?
Thanks,
Tom
Bump. I'd really love to find how to do this also, I'm doing it several times a day ...
On my 8925 phone I created two contacts.
Turn Forwarding On:
_OnForward
*21*5125551212#
(replace 5125551212 with the areacode and phone number you want to forward your calls to)
Turn Forwarding Off:
_OffForward:
##21#
The _ puts the two items at the top of my contacts list. I click contacts and then press call on the selected forwarding option. Sometimes I get an error message "command not supported", but that is related to my phone's connection strength and not the programming. This has been working well for me for about a year. I have tried to make a couple of buttons that dial the contacts directly from another screen, but that hasn't worked. You have to open contacts and the press call on the option you want.
Later-
Good morning gents.
I have an HTC TyTN II with Win Mobile 6.1
I created the contacts like that and on my "Favorite People" page I put the contact there, it just says :
"Cannot Complete the call. the Signal may be unavailable or the phone number may not be valid. Verify the number or try again later."
From the contact list it works of course.
Another question regarding call forwarding. Is there a way to have an icon on the top bar that says the call ARE being forwarded... I keep missing a couple of calls that end on my home answering machine because I forgot to forward
Vesperatus-
I have all of your same issues. As far as I know, there aren't any solutions. You just have to remember to unforward your phone.....
-Later
Hi,
My brother and his wife share the same house phone number.
When I call my brother, the phone shows her contact information.
The same happens to other contacts. When I call my wife at home, my contact info shows up during the "call".
People with the same phone numner:
Jan Nissens
Nadine Van den Abbeele
Tom Nissens
Yasmine Nissens
With default Dialer from TyTN II:
When I call Jan at home, it dials Tom
When I call Nadine at home, it dials Tom
When I call Yasmine at home, it dials Tom
When I call Tom at home, it dials Tom
Doe someone else experience this?
Or even better: who has the solution to this problem?
Patrick
You have stored the same nr. on youre brother and hes wife, you need to change what is the main nr. Like now its the house nr. So when you call youre brother, he got the same nr. as youre brothers wife.
Give the troubled contact order to call cell nr. as default instead.
I don't understand your solution. Can you be more specific?
Patrick
nissensp said:
I don't understand your solution. Can you be more specific?
Patrick
Click to expand...
Click to collapse
You have saved more than one contact on the same phone number. When you want to dial one of them the other shows as contact as they share the same number.
Indeed, that is the problem. And do you have a solution?
Patrick
he already stated his solution
you have x listed as same number as home
you need to make y the same number but not save it as their home number.
two diff contacts, same number, save one as home and the other contact as something else like "pager, work2, etc...
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
nissensp said:
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
Click to expand...
Click to collapse
SPB are the ones you want to ask to improve the interface if the solution works normally as stated with WM, to be honest i would just put a contact as say Mat & Shaz if they lived together or as you have since my brain would communicate to me and say they live together and i know who i'm calling...
Merging them into 1 contact isn't a good idea:
- I can't store the birthday for each of the contacts
- They have 2 kids, so there is a total of 4 persons with 1 home phone number
- I want to be able to know who i called before (I tap on the corresponding person to call the home number).
Patrick
nissensp said:
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
Click to expand...
Click to collapse
They are not going to adapt to SPB Anyways, make contacts like this then:
Wife Home, Wife Work, Brother Home, Brother Work. Yeah you will have more contacts instead of all numbers in one, but you will not have problem calling them.
nissensp said:
Or even better: who has the solution to this problem?
Click to expand...
Click to collapse
Given that HTCs default Sim Manager/Contacts program automatically labels all of my imported from the SIM phone numbers, as Cell Phone numbers (even landline ones) and there seems to be no way to correct this during a batch import (I'm not going to go in and edit each one), I'd have little faith in a software solution but you could dictate to your friends that they all install multiple numbers at their homes and have them individually assigned for your ease of identification
Seriously though, if you want them still to be friends, there's no simple way to get around this problem as the Caller ID information that comes into your phone specifies a phone number and that number is tied to a contact (or several in your case). How is the phone to know which contact is on the other end of the phoneline actually making the call? HTC hasn't developed a crystal ball plugin
@Flying Kiwi
I'm not referring to incoming calls, but to outgoing calls.
Patrick
HTC bugs
nissensp said:
@Flying Kiwi
I'm not referring to incoming calls, but to outgoing calls.
Click to expand...
Click to collapse
Sorry for misunderstanding you. Although your post is titled with 'calling', I just couldn't see where the real problem lay as you already know who you're calling because you looked it up in your contacts and tapped it. Although another name may subsequently be displayed on the phone, that's one of the problems with HTCs software (along with incorrectly assuming all imported sim contacts are cell phone numbers). Short of re-writing that code yourself, I know of no way to fix it. You'll be better off keeping all your birthdates and 'finer details' elsewhere IMO. Personally, although I dabbled in using the 'onboard' contacts, I now only use sim contacts.
The other people who have posted here look to have provided plenty of workarounds but it's HTC (or spb) that would need to fix the software to get things exactly how you want it. I suggest that you report this to them and see what they have to say about it.
I have a fix for this; hopefully this will work in your country too.
For my sister I store the home number as 0123456789p1
For my brother-in-law I store the number as 0123456789p2
The "p" tells the dialer to pause and this is then treated like a different number. the number after the "p" is (in the UK) ignored and so can be any number you like.
Unfortunately, on my TyTN II it doesn't work.
My wife and myself have the same home phone number. I added "p1" to my home number and "p2" to my wife's.
But when I call my wife at home, it still shows my contact while dialing!
I also softreset the TyTN II, but it didn't work.
That's sad, and it means it's HTC which cannot handle "p1" and "p2".
Patrick
Workaround works for me
nissensp said:
Unfortunately, on my TyTN II it doesn't work.
My wife and myself have the same home phone number. I added "p1" to my home number and "p2" to my wife's.
Click to expand...
Click to collapse
Did you add the p1 or p2 etc at the end of the number? I tried this on mine and it worked perfectly. Yes the HTC software has its bugs but this seems to be a good workaround as long as your network copes with the p1 etc. If it's dialling out ok then that's a very good sign. Perhaps your ROM may have different abilities but my standard setup copes with the rjcb23 workaround perfectly - just a shame I have no need to use it!
I managed to find another trick.
I replaced p1 and p2 into #1 and #2
A big thank you to rjcb23 for giving the hint for adding p1 and p2!
Patrick