Related
i just recently bought my xda2s and it worked fine for a week though. now, from time to time my screen would be "untouchable". literally i cannot click anything or open anything even if i soft-reset it for 10x. buttons seem to work fine but the screen does not. it happened twice while my bluetooth was "on" and i thought maybe it was the bluetooth but recently the same thing happened with my bluetooth now turned "off". i have to wait for hours before it would return to normal again. Anybody help please? By the way, my bluetooth version is 1.0.0 build 3500.
I had a similar problem on my Samsung SPH-i700 PocketPC Phone through Verizon Wireless. Even after a hard reset, I couldn't get past the screen calibration, until I found out that a piece of hair and debris found on the outer edge of the screen right under the lip of the cover was interfering with the touch portion of the display. Apparently, the touch sensors extend past the visible area of the screen, so with both a little aircan and vacuum cleaning, the debris was picked up and the touch screen functioned normally again.
Is this a consistent and/or intermittent problem? Did a hard reset resolve anything?
look for the alignment
Do you have Calligragher 7.4 installed? I read about this in Tekguru website that if you re-install 7.3, the problem goes away. That is what I have done and it seems to be working for me so far (2 days test).
i've checked out my screen and i dont see any dirt or something... i even have a screen protector... dont know if that might cause the problem. Same thing happened last night but this time it was just for a short period of time then it went back to normal... I didn't try a hard reset cause i dont want to loose some of my files but if ever it happened again, i might try doing a hard reset and see what happens... right now, im having my xda2s checked if maybe it's a factory defect or something...
regarding the caligrapher program thing, i dont have that...
Hey, i have the exact same problem I bought mine here in Toronto, from an Asian dealer, its the O2 XDA IIs asia-pacific model.
Same problem, screen(touch screen) goes dead like no responses to any touches, for like half hour - 2hour once in a day or something and nothing cures it, hard soft rest nothing. just with time it suddenly starts working and the Handheld is useless until then...well i dont see any cure and this is the only place i have heard about someone else having this issue, i will take it back to the dealer, in hopes of exchanging.
any feedback will be will be appreciated
overclock it for a few days..that fixed mine..dont know how but it did.
There is a tread in blue angel about screen aliment that you might like to read. seems 4k of devices went out with screen problems.
What is overclock it. Fairly new to this. Mine just keeps trying to allign and thats all it does it doesnt go into boot mode just allign screen all the time
from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.
So, i'm usually quiet on these forums. Just reading, trying roms, etc. But here is something that has me stumped. Last thursday my phone crapped out. When i woke up and looked at it (it was connected to my laptop/charging) Applications were opening left and right, i couldn't close any of them because stuff kept opening. I tried to soft reboot it and it didn't help. Once it rebooted stuff started opening itself at random again. I ended up pulling the SIM and battery out and leaving it for 5 minutes. When i put it back and powered it up the touch screen no longer worked, but apps weren't opening on their own.
What gives?
I have hard reset (which means it's waiting for me to touch the screen to setup my rom), i have also taken off the screen protector (in case it had something stuck under it. Neither of these things helped. Per the forums I got a new screen, just put it in, and the touch screen doesn't work still... I'm drawing a blank here can anyone give me some advice. Going back to my Prophet for the time being but I HATE not having a keyboard (and it's slower than molasses)
have you tried flashing a new rom via sd?
Check that the screen protector has not moved under the front bezel and keeps pressing your touchscreen.
Robert
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Any other suggestions?
fiddelm3742 said:
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Click to expand...
Click to collapse
Similar problem happened to my Kaiser phone, although no multiple files opened, the phone just won't react to any touching, not stylus pen either. So I first soft reset, then hard reset, none of them works, now the phone can Sync alright, but the screen just stands on the Window Mobile screen, saying "Tap the screen to set up your window mobile device"
I only have this new phone for <3 weeks.
I went to HTC site, want to download a latest ROM file from them, after typing in the S/N, it won't let me, saying that ROM is not suitable for my phone.
So now I am download ROM file from this site, will choose one to flash the phone, see whether it works.
I will call HTC tech support tomorrow after Thanksgiving, see what they suggest
Hope some gurus here can also make some suggestion, Thanks!
Well I replaced the LCD and the new LCD works great, but the screen still doesn't respond to touches. What gives?! I hard reset and I got past the windows screen alignment thing by creating a welcome.not file but it's still pretty much worthless w/o a touch screen. Anyone have any suggestions?
Whoa, i thought something odd was going on. Never mind i got entirely the wrong idea.
Ha, not the case.
Anyone know if a flex cable would fix my issue? I dont really know what the felx cable is for but i've seen posts about people replacing them w/ LCD problems. I don't know if it is touch screen related or not, and i'm kind of tired of buying parts that don't fix my problem
please just flash a new rom whch ever you want (for some reason i thought you said that it keeps restarting your device because if that was the case the only option you would have was to flash via sd as activesync would load long enough for you to get a connection to flash from the computer)..trust me just try it..what have you got to lose
I reflashed one yesterday actually. The newest HyperDragon (which is looks like a new one is available today) It wasn't rebooting but initially windows were popping open left and right so i restarted it a couple of times(which i first had the problem, not yesterday) Yesterday it worked like any normal rom w/o the ability to touch. Anywho, after the flash of a different rom. No luck. I'm thinking it's a hardware problem of some sort but as i've already replaced the LCD i have no idea what?
yah thats sounds funky..you can bring it in for a warranty exchange either at a local DSC or over the phone (that is if your with att) and if not call HTC..all devcies come with a 16 or 18 month warranty
Well I called ATT yesterday, apparently I purchased the phone On Oct 17th 2007 which means It's out of warranty (apparently it has a 12 month warranty?) So it sounds like I'm SOL. So, i guess I'm off to ebay to try and fine a phone that I can canibalize to try and get mine going again.
touch screen
this may sound dum but when you replaced the screen did you replace the touch part as this is different from the screen
Well I picked up this
http://www.blackberry8100parts.com/...B3-NEW-HTC-TyTN-II-KAISER-P4550-_p_35-70.html
which includes the digitizer (from what I know it's all one part when they send it to you) The screen has the digitizer built in. So i replaced the part they sent me.
I just stated having this issue. My touchscreen stopped responding to touches over the weekend while the keyboard was extended. I just took the phone apart to make sure everything was connected right & put it back together, & now the touchscreen doesn't work at all. This sucks!
Any news? i'm having the same problem: no response at all, stuck at "Tap the screen to set up Windows Mobile-based device"
An interesting problem with screen
well my tilt fell out of the car holster while using gps and i suspect the screen hit my gear shift. I didn't notice anything odd after i put the battery back in it (yeah it fell that hard lol). Later that night I went to check mail and noticed something not right. Turns out my screen seems to have been pushed in a bit. Well here's the issues I've noticed so far: All the touch responses seem fine except for 1) the screen alignment doesn't register taps, but otherwise the touchscreen works and 2) on the htc home screen, I can't tap the house icon unless I tap any other icon first.
Initially I thought there was some pressure or deformation right at that particular spot, but it reacts the exact same way in landscape mode. I can't tap the house icon first; I have to tap something else first, then the icon works fine until I open a program or something and go back to the home screen. Then I simply have to tap weather or something and then home.
I'd reflash the rom or do a hard reset, but the screen alignment didn't work when I tried it so I didn't want to get stuck at the "tap your screen to begin" part.
Any ideas or do I just need to buy another screen or maybe just the digitizer. the amount the screen seems recessed is maybe a millimeter at most. Just enough so that I noticed a difference when touching contacts just above the housing. I tried cleaning by using a business card and running between screen and housing. Ohh... and one more thing... when I open the cube and then close it, I get what I refer to a static frazzle for split second and it goes back to normal. That only happened a couple of times after the business card thing. Do you think I just loosened a connection? damn... I still haven't taken it apart yet. Think I need to. Any help appreciated.
If your screen does not work, you can still use your phone. There is an app that you use on your computer that acts as the touch screen. This also works when the screen craps out.
http://www.sparus-software.com/spip.php?page=download&lang=en&ref=at&t=tilt
(EveryWAN Remote Support Personal Edition - Free download)
yeah -- my touchscreen didn't crap out totally, it just got muffed up when I dropped it a bit. Well, i went ahead and installed codefreaks remote screen alignment thing and did a hard reset. Well, the hardreset did the trick w/out the need for anything else. The alignment worked and everything. So, i'm back in business. Everything seems to work properly, except that my screen is still recessed a tad; but, that's not a big deal really.
I got this weird problem... On two Xperias! My first was like this from the beginning, the other started two days ago.
I can't get the screen aligned. i got coordinates from a friends perfectly aligned screen, and it is off, not in the edges, but in the middle. I don't understand what might be wrong. I have aligned my screen 30 times, and flashed the phone two, with two different ROMs, one original UK Xperia, one Blackstone by itje.
If other people got this problem, please make a post here.
Also, if you got "perfect align screen", if you can post your coordinates from the registry here, so I can test them, it would be great!
bump. please, need to find out if other people got this problem
Lol
Looks like nobody does. Do a hard reset on your phone from the Start Menu/Settings and perform the manual align by tapping the screen.
You can't just take settings from another phone and expect them to align because it doesn't work like that, otherwise the alignment wouldnt even be necessary.
Manual align this way and let us know how it goes.
Well, it did work at first. But the day after the middle part of the screen was completely off. But I have tried hard reset, soft reset, installed different ROMs, nothing works.
Sounds weird. Of the digitizer is broken it wouldn't work anywhere correctly. Check your installed programs. Maybe something is messing with your touch-alignment.
Have same issue
do you align using ur finger or ur stylus ??....better the stylus
"i got coordinates from a friends perfectly aligned"
Now that sentence made me think about what you are doing..
just align and follow the instructions? ...
Sorry but... JERK!
I tried to align, but it just looped, as I SAID BEFORE! Please read all posts before saying ANYTHING, because if not, it WON'T help me, or others that might have the same problem.
The coordinates from my friend, which I got from his registry, on the same phone, with same language, probably the same party, worked one day, the next it didn't. I allways align with my stylus, tried with finger, didn't help. got no programs installed, have tried itje's rom, and a vanilla Xperia UK rom, same problem.
In fact, same problem on TWO Xperias, gotten from the same store, same color, but the last from a later party, which my friend got one of too.
This can't be a coincidence... I will deliver my phone to the store, but I need confirmation about the loop from other people here too, because this time, I will get my money back. I can't go half a year without a phone because SE screwed up their deal with HTC, which choose to take cheap crap-plastics and apparently screens instead of the real deal in phones priced 650$++ here in Norway. It just doesn't hold up!
alignment routine looping
i've had the alignment program problem looping issue before and eventually realised that it was because I wasn't tapping the screen hard enough with my stylus. I'm not saying smash the hell out of it but applying a little extra pressure did the trick for me.
As far as loosing the settings and hacking it using a mate's calibration I'm with the others - probably an app you've got installed that's wiping it and using somebody else's cal is pointless!
I tried tapping so hard you get the lcd-effect, the rainbow-effect on the screen. Too hard. And, only prog i got installed is regedit. Only aftermarket I got, so thats no go. Guess the touch-thingy (digitizer?) is screwed then. Well, I want my money back
It will be just a few days till may warranty will be over (1 year warranty) and my silver just got almost dead digitizer today. Sometimes it works sometimes it doesn't since I installed touch response before so it'll vibrate when I touch it. I hard reset my phone since I think it maybe due to a software problem, but now I'm stuck on the align screen. I guess of all the Xperia users on the whole wide world I consider myself to be the "unluckiest".
Hi there, I know there are other threads on this, but I've got two questions;
I might be able to claim a repair on insurance - the policy doesn't state anything about rooting voiding it, but I'd want to play it safe and flash back the original RUU - now, the digitizer works on my phone, but the LCD is totally shot, can't read anything.
It's been a while since I flashed the RUU, so is there any point where you have to press a button or something on your phone to advance? is it possible to use ddms while flashing the RUU to see what you're doing?
Also, if I can't claim this on insurance, how hard is it to replace the screen yourself? I've seen a "genuine" (hmm.) LCD/tools set on ebay for about the same amount as my insurance excess, so this seems like it could work (if it's easy enough!).
Thanks!!
laughingcavalier said:
is it possible to use ddms while flashing the RUU to see what you're doing?
Also, if I can't claim this on insurance, how hard is it to replace the screen yourself? I've seen a "genuine" (hmm.) LCD/tools set on ebay for about the same amount as my insurance excess, so this seems like it could work (if it's easy enough!).
Thanks!!
Click to expand...
Click to collapse
I've not done it personally but I have seen the guys in the phone shops doing it.
It's not that hard, but you have to know what and where to remove. Just go slow first.
pardon this but what is ddms?
Hi,
I have flashed RUU for my Tattoo at least twice. And as far as i remember there is no point you have to do anything on your phone. It will reboot (into fastboot i think). You will se progress on computer screen.
By the way, how can the LCD be broken and the digitizer not? Is the lcd shattered?
This is against laws of physics!
Oh, maybe I got the letters wrong but ddms is part of the android sdk, so you can take screenshots on your computer - also handy if you've broken your screen and need to know where to press.
As for defying the laws of physics, I guess the Tattoo is more special than we thought! the lcd is showing up loads of black/white cracked patterns (but a small it at the bottom works, so I can just about make out my dock. )
Thanks, insurance guys seem to be a bit more helpful now, so hoepfully won't have to resort to doing it myself.
Just in case anyone else has this problem, found this nice photo-guide to unscrewing everything: http://translate.google.com/transla...acenter.ru/razborka/htc_tattoo/&prev=_t&twu=1
haven't got round to it yet, but should do after exams.
Thanks useful info.
I have opened and dismentled everything my tattoo 3-4 times refering the guidlines. It is really helpful.
I was trying to resolve a touch screen problem. My phone acted like something is always touching at a point of the screen, so, I couldnot able to select a thing correctly and it is worst while typing using screen keyboard. So, I disassembled my tattoo and clean everything inside and assembled again. It seems working correctly for few hours then the problem reoccurred. And I disassembled again and again.
Atlast, I found out the problem was just on the screen protector, I have removed it and resolved the problem. Funny problem but it is worth all those efforts.
Bad Digitiser
Recently the Digitiser of my phone went bad. I tried flashing back the Stock RUU but did not succeed since it was not able to detect my phone. Then I just flashed back the backup of the stock ROM and took it to the Service Center. To my surprise the person didn't even check whether the phone was rooted lr not. Since it was out of warranty I still had to pay I still had to pay $45.