Database Develop

Htc Breeze Test Sspl

So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
extract to your device root!!!
start spl.lnk AND immediately press POWER and CAMERA buttons. (or try hust CAMERA)
if the screen shows sth like spl 1.01 DFR, then everything is ok - it is my spl
this version was intended to allow you to flash any CID rom update and unsigned nbh files. the next release will be based on the latest spl and include compatibility with new RUU of 1.34 rom updates and the feature to fix bad blocks.
EDIT - may 10, 2007 - SSPL V1 works successfully
CID check - disabled
NBH check - disabled
attached spl in nbh format for flashing - breeimg.zip
Thanks to:
DES for his SSPL
Olipro for his hard spl which actually saved me from hours of IDA analysing - I simply compared his spl to original and patched the one from breeze

at first try...
i have exactly what i descriped here:
http://forum.xda-developers.com/showpost.php?p=1253965&postcount=782
after the reboot i can't get into the bootloader...
what did you changed in the spl ?! or in the sspl.exe ??

I try... It's WORK!!!!!

what did you do??
edit:
ok, strange things goes on here ... just tryied it another time yet...
ipl-sspl by Des
SPL-1.01
should work
if i have time today i will try to made an cooked rom ...
if this works i look for a way to extract the files out of the excalibur wm6 rom ...
edit2:
i now have the problem that i can't connect mtty to bootloader... mtty ends with error when producing the cmd command line... i just had this problem with hermes to... i have 2 mtty version on all the 2 the same error...
i will try it now on a other machine..

1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)

THX
Thx for the replies, i`ll try to make a newer sspl. also, let`s begin the work for wm6 for breeze based on hermes rom... but in another thread some time later

can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.

doedoe said:
can anyone confirm that they have sucessfully flashed a cooked ROM onto a breeze? Please update the wiki.
Click to expand...
Click to collapse
Hi, i work on it!!
on afternoon/evening i will try to cook a rom with a few freeware tools bases on the actuell rom!!
i can begin working on wm6 rom recently when extract the excalibur content... because of the problem that breeze is a smartphone an hermes a ppc there would be some problems with coredll's of the system! because of that i need smartphone wm6 rom... befor that there is no wm6 on breeze possible!
....
can anyone else can try mtty with the sspl ?
-----
engel98 said:
1) Rename the BREEZE_HTCEUR_1.34.251.1_SHIP.nbh file to BREEIMG.nbh
2) Copy to sd card
3) start spl.lnk and immediately press POWER and CAMERA buttons
4) Phohe start in bootloader and flash new rom. (but no new radio)
Click to expand...
Click to collapse
this should work when you have a new spl installed - and you want to flash another cid rom!!
has nothing to do with unsigned code!!
!!! only for understanding!!

hey what should i say...
it just look like that it works...
i have cooked a rom now...
only small reg changes!!
i have flashed it with hermes RUUUpdaterV2
only a OS file!
Phone boots! now i have to check if the changes are taken over!!
But why not ;Þ

Please post to the wiki.
I am hoping that we can use tornado WM6 code to cook a WM6 image...

I just added some Infos to wiki!!
Updated:
Breeze/MTeoR Upgrading Guide (4Hard/S-SPL)
Custom RUU Updater

I can also confirm that this SSPL truly works, but I am still unable to flash 1.38 radio over 1.29 currently installed with this SSPL version.
Any hints when could we expect SSPL based on some newer SPL release (like 1.09 or 1.10)?

just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...

futureshock said:
just extract the radio rom what you want from an shipped rom ...
take it and re nbh's it with the nbgehn utility ... than put it in the custom ruu folder start ruuwrapper and flash it...
Click to expand...
Click to collapse
Tried that 3 times already. Doesn't work! Although process finishes whithout any glitches, System Info still says Radio ROM 1.29.00, and my phone still acts like crap...

.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!

I confirm this is also work on my dopod 595.
Now I need to search how to change the splash screen

what would you want to change??

futureshock said:
.... i tried it too ... no problem... you should have done a mistake...
download an usb sniffer and let it run when updating... maybe then we can see the error...
but i had done it too... with sspl had no problems!!
Click to expand...
Click to collapse
This is what I did/have...
- I have installed Radio ROM 1.29.00.10 (with older 1.32.251.1 RUU)
- My MTeoR is CIDed QTEK_A07 - all available RUUs fail with INVALID VENDOR ID error
- If I use SSPL (linked in this thread), my MTeoR actually does start SuperCIDed and I can run any RUU or custom ROM, and although all of them complete with success Radio ROM DOES NOT CHANGE at all.
My theory is (based on posts in Hermes upgrading forum) that Radio ROM 1.29 installed Radio BL 0108 which in turn does not allow flashing Radio ROM when started SPL is pre-1.09 codebase. I presume that it flashes with 1.09, 1.10 or newer only (makes sense because HTC released new 1.34 RUU which first installs SPL 1.09, then the rest of ROM).
Can anyone concur with my assessment or am I completely wrong?

Ohhh,thank.It works perfectly on my HTC MTEOR from O2 Czech Republic.

sp3dev said:
So, guys, here is the first test SSPL for breeze. I have no breeze, so please report if it works.
SSPL V1 works successfully
CID check - disabled
NBH check - disabled
Click to expand...
Click to collapse
WOW
I have now read for weeks the Hermes/Trinity threads wondering if this would be possible for "simple" smartphones too - and you did it
So while it is possible for the MTeor, maybe your kind of patching the SPL would also work for the Excalibur/S620?
I would love to flash my O2 Cosmo, but want to have an original ROM Backup for warranty/fallback reasons.
I also found out that it is possible to extract and cook ROMs for it like the way for the Hermes - but I cannot flash because of this f****g need for signed .nbh.
May be you are able to do this MAGIC on a Excalibur SPL too?
I would try out on my phone if you want to take the challange - if it doesn't work I think I'll have to get a MTeor
Anyway - lots of thanks for your work - and giving me back my hope on smartphone ROMcooking

First time flashing, Need Help

This is my first post
Ok i want to flash my phone for the first time and want to know if all my info is correct.
I want to flash my phone from the stock rom to the WM6.5 pure rom because my battery sucks and so does my signal, any idea if this will work for me???
heres the info i have:
" *** Flash X1 without PC - Micro SD Method ***
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
This method works for any 6.1 and 6.5, and even radio rom.
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd,
and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right,
and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction
-------------------------------------------------------------------------------------------------------------------
WM 6.5 ---> http://aerohornet.com/xperia/SEX1-R5.04_PURE.rar
BUG FIXING SUPPORT
*Voice Command is included, but disabled by default. To enable it, download and install
THIS CAB (ROM SEX1 R5.07 VoiceCommand).
This will enable the bluetooth audio gateway too (thanks to a1234567 for posting the registry settings)
*Common WM6.5 glitches: a) Tapping taskbar battery icon does nothing b) scrolling dialer with keypad hidden
causes display corruption
add ons ----> http://forum.xda-developers.com/showpost.php?p=3701695&postcount=2 "
Am i on the right track and is it recommendend i do this ?

First of all, update to official R3-rom via SE update service.
There you will get a new radio (signal strength).
After that, Hard-SPL your phone.
When that's done, yes, you can use the Micro SD method.

thanks a milllion so if u upgrade to this rom first like this is it ok ???
"1. download this: http://rapidshare.com/files/238466530/APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe then
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd,
and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right,
and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction"
because that is the R3 rom right ?

Just follow your instructions and flash to gtrab ROM first. then if your reception or battery doesnt increase, you can flash to a different radio version. The way to flash to a different radio version is the same method as ROM but u need to find the radio file. The radio file is also in the ROM developement section, all you need to do is search. I think the lastest radio file is 1.16 or 1.17. Good luck. Just post any questions and people will gladly help you.
PS: Once u start to flash different rom, it is addicting to try to different rom. Dont ask which rom is the best, every ROM has it positive and negative. YOu just got to try them all to see which one fit you the best.

so i downloaded the 1.16 radio and...
"Just extracted from new Korean R3BA015 Rom
http://rapidshare.com/files/25077333...1_16_25_48.zip"
did it this method!
"1. just copy the file *.nbh into the root directory of SD card and rename into kovsimg.nbh
2. Do the ordinary flashing (hold the bottom volume button and the power button until the flash screen appear)
3. Follow the next instruction"
its saying loading for 5 mins now , is this normal???

ok i never hard spl it first i think that might be the problem

im having a huge problem hard spl my phone can someone please guide me step by step thanks

1. State problem
2. Follow this for HardSPL'ing http://forum.xda-developers.com/showthread.php?t=431218

dogans said:
First of all, update to official R3-rom via SE update service.
There you will get a new radio (signal strength).
After that, Hard-SPL your phone.
When that's done, yes, you can use the Micro SD method.
Click to expand...
Click to collapse
Havent you read the posts???He clearly mentioned you to Hard SPL first...It is the most important step in ROM flashing...You can even brick your phone if you dont do this step...
Contact me if you want assistance: Y!MSgr id: [email protected]

oh yes it did it this things tricky cos it gave me connection errors like 10 times before it worked now to install the radio n then the 6.5 pure rom i will install tomorrow thanks a million guys will let u know if i get stuck again lol

thanks a million my radio rom works 100% will be back tomorrow btw did anyone experience a rom with great battery life if you have please post the link

this is also a great rom with no hick ups.

borg28 said:
this is also a great rom with no hick ups.
Click to expand...
Click to collapse
which rom are u refering to and please provide a link thanks

SEX1-R5.04_PURE is working 100% and its gr8 , i wanna thank everyone for helpine me n if u even need application recommendations please let me know i am also here to help and now so can i help with flashing THANKS A MILLION

i cant c my sms's on SEX1-R5.04_PURE and it has no fixes help someone

seems like it was a unfixed bug in the roms of most 6.5's so i then flashed to the UnOff rom n it seems to be working gr8 so far thanks everyone!

X1 problem to hardSPL for newer SPL version 0.78.0000

X1 problem to hardSPL for newer SPL version 0.78.0000
Hi, I am ALi , sorry to bother, but just done some HardSPL on my X1,
last time the SPL ver was 0.78.0000
i read many of method to flash a newer ROM must HardSPL first their X1,
the problem is, I had already HardSPL it to SPL ver 0.72.0000, the process was a success
but
it stucked/bricked at tri-color mod, so i had it settled from
forum. xda-developers. com/showthread. php?t=455553 thread reported by MALIK,
i noticed that before down grading my X1, the ROM ver was UK_GEN_R3AA010,
but
after HardSPL to ver 0.72, i cant flash the original ROM UK_GEN_R3AA010 back, instead of that only ROM UK_GEN_R1AA017 are working with my current flashed SPL ver 0.72.
I tried to Hard SPL to 0.52 Olinex version (i didnt find any 0.72Olinex!! just 0.52 Olinex, where can i found the 0.72 ver of olinex?? does the 0.72Olinex really exist?? i am so much confiused now and really tired of trying to make it work in almost a week!!) so many time but fail, by USB, by SDcard (also try to replace my SD-HC4gb to Nokia SD 256Mb) neither of that method work!!
please help...
i am desprate to implement newer ROM on my X1 so called Kovsky....
please admin/engineers/developers help.... my head are getting bolder than b4 huhuhuuuuuu........
-ALi
Terengganu, Malaysia
p/s: i am uploading some of my pic shot while the problem persist right now to photobucket, but i am affraid that i didnt have any permission to attach th pic since i was a newbee....

The hardSPL 0.72Olinex can be found here (X1_HardSPL_v1.zip):
http://forum.xda-developers.com/showthread.php?t=431218
Also there is a detailed describtion on how to hardSPL your device:
http://forum.xda-developers.com/showthread.php?t=431218
For questions you can try the search button here, if you can't find any on this subject (which I doubt, because the question has been asked more than once in the thread) reply to the thread:
http://forum.xda-developers.com/showthread.php?t=431218
I've flashed my X1 with hardSPL and back to stock SPL a number of times, never without succes. From 0.720000 to 0.72Olinex to 0.720000 and from 0.780000 to 0.72Olinex.
So when you can't hardSPL from your pc there must be something wrong with the connection between pc and X1.
If you want a newer ROM with stock SPL, connect your phone with stock SPL 0.720000 to SEUS and SEUS will automatically update SPL to 0.780000. After that you can flash R3A ROM.
The other way through hardSPL and the manual download of R3A from PavelX1's sticky.

I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???

motok said:
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
Click to expand...
Click to collapse
Download you stock ROM from PavelX1's sticky thread and flash it...

Tnx you saved me from hours of searching

Hi Lokhato,....
thankx for the advice,... if ou wont tell me about the SEUS, sure my X1 i declared it DEAD!!! I was accidently HardSPL it to 0.72.0000 i think...., because of i tried so many times to HardSPL the OLinexSPL to my X1 but it aint workin. but then when i replace the RUU_signed.nbh that got version 0.72.0000stockSPL it worked AND THEN it STUCKED at the boot screen says that please wait, continue to upgrade ROM.... damn i resolved it...
so my step on recover to the latest stock SPL 0.78.00 are like this,...
1. download the SEUS from XPERIA website.
2. try to READ and FOLLOW the instruction stepbystep. even whenever the application ask you to restart the PC/LAPTOP, please make it done so....
3. whenever SEUS asked u to enter the bootscreen, MAKE SURE you take out the SD out from your phone. and let the SEUS flash the OriSPLver 0.78.0000
4. then it blinks several times after the progress bar finished, and it also stucked at bootscreen saying to continue updating ROM.
5. in this situation, please flash back your ROM with ROM UK_GEN_R3AA010 not the R1 or R2 ROM. so to manually flash the R3 ROM, copy the R3 image file to your freshed format SD and named it kovsimg.nbh
6. so put the SD in X1 and soft reset the X1 by pressing the reset button with your stylus at the back panel of X1.
7. let it load the image whenever it enter the boot screen again
8. press the power button to confirm upgrade ROM.
9. it should state there SUCCESS!! and you must HARD-RESET the X1.
9. waitt...... and wait...... be very patient, take a break... let it run.....
10. you are DONE!!
enjoy your original flashed ROM,...
if you not like it,
from this point you can just simply HardSPL it to 0.72Olinex by downloading the X1_HardSPL_v1.zip
then go get another ROM and repeat step 5.
as my observation...
SPL 0.72.0000 can flash img from R1,
R2 I dunno can flash or not, never try it...
SPL 0.78.0000 can flash img from R3
HardSPL it to OLinex ver 0.72OLinex ver, then you r good to go to flash any ROM you like!!
damn what a hard week!!! at last i got it to flash the HardSPL on my X1
last but not least.... just want you all to know that i was doing those step above from my mom's laptop current spec was CentrinoDuo, mine that always hanging whenever try to flash any SPL was on SempronAMD Laptop + always BlueScreen error even after i freshed repair my .NetFramework ver3.5sp1. so if you facing any problem on SPL our X1, try to done the upgrading on another PC/laptop, i believe that Intel based processor was more stable than AMD i think...

Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?

Lokatho said:
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
but
- last time my original 0.78.0000 cant do HardSPL
- after accidently flash the 0.72.0000 by using RUU but at the same time i copy the stock0.72 SPL to RUU folder,,,... or my mistaken to copy to SD also by renaming it to kovsimg.nbh i think, just cant remember at that time, and still cant HardSPL + hangging somemore....
- after SEUS updates to newer stock SPL 0.78.0000 like before it was very easy to HardSPL with 0.72OLinex..... wonder y.....
hmmm... CustomRUU??... i think if i try that method would always get the ERROR code rather then success huhuhuuu....
for now i just stick to flashing ROM using Nokia SD 256Mb if the img can fit it in....
thank you so much anyway bro...
u da man!!!!

Lokatho said:
Don't know if you can use the SD-card flash
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi

Several roms do have panel manager installed so there is a use for the X Button
in case it is not cooked in you can add it manually. Also XMapper is available for alternative uses of the button...
Finally, if Silent_UC is supported by the rom you can bulk install many apps, registry edits, etc. after flashing the rom or afterwards. Just search...

putrabiru said:
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Click to expand...
Click to collapse
hardSPL can be done without a problem from 0.780000. I did it several times after I brought it to repairs.
In post #5 in the EnergyROM thread you can find a link on how to install the panelmanager, from R3A and X2. This works with all roms which don't have the panelmanager installed.

Mod. edit: not dev related, moved to general

I am very happy now! Just managed to update my SE X1 after SEUS 0.78!. As others suggested downloaded R3AA010 (APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010), but used NBHUtil to extract ROM. That was a mistake! I simply renamed R3AA010 to Kovsimg and put it in my SD 2 Gb card. Ufff, after 2 weeks of endless reading the forums and thying this and that... Finally!!!!

[Q] I Need Help....

Ho. Hi all, i have problem with my xda 2 & I have it 3. All have the same problem, it can't use to make a call or receive a call otherwise the GPRS run well. I already try all new roms, but still the same, cant use it to make call. I cant remember the last time it can use to call. Somebody help please.... n sorry for my bad english thanx

mipsiz said:
Ho. Hi all, i have problem with my xda 2 & I have it 3. All have the same problem, it can't use to make a call or receive a call otherwise the GPRS run well. I already try all new roms, but still the same, cant use it to make call. I cant remember the last time it can use to call. Somebody help please.... n sorry for my bad english thanx
Click to expand...
Click to collapse
hi
I suggest you could try unlockig it again (I assume it is sim-unlocked?). I used to run axdadev_all_unlock-v1.6_138 only once, but I was having some problems, so I always use same application twice and it works great
1) download axdadev_all_unlock-v1.6_138 and copy it onto device
2) find it and run it (on device) via file explorer
3) when u see "success" screen, soft reset device
4) run axdadev_all_unlock-v1.6_138 again
5) when u see "success" screen, soft reset device
let me know if it worked
BTW:
1) have you tried to Hard reset your xda II ?
2) have you tried different radio's ?
3) are your devices european or maybe from USA?
regards
Matt

Ho. Hi Matt, thanx a lot for your answer on my problem. I already try every step you told me, but still looks the problem still happen. I Already hard reset my devices for many times, but not help. Should I try another radio? hehe, i don't know how to try another radio coz i newbie. Hope you will help me to solve my problem. Btw, I live in ASIA, Indonesia if u ever heard, so I guest my device made for ASIA....
Regard,
Indra

hi..try to upgrade ur radio stack..
according to this forum,radio 1.17 is the best choice..
but i'm using radio 1.18,wm6.1 by aeroflyluby and still not find any trouble..phone OK GPRS OK....but the latest one is 1.19
u can use himaupgradeut or himaupgradeut_noid (for european or other but i think ur device is asia version)then put ur rom file (nk.nbf),ur radio file (radio.nbf) and click the himaupgradeut..
but u must sure there are enough battery (50% above) in ur device before upgrading..
just wait and relax(coffee,snack,etc)
ps:if u want a 30mb storage for ur device when using wm5 above,before upgrading u can use ExtROM unlocker and HIMA DOC Tools for repartition ur storage.
hope this will help

xda_anto said:
hi..try to upgrade ur radio stack..
according to this forum,radio 1.17 is the best choice..
but i'm using radio 1.18,wm6.1 by aeroflyluby and still not find any trouble..phone OK GPRS OK....but the latest one is 1.19
u can use himaupgradeut or himaupgradeut_noid (for european or other but i think ur device is asia version)then put ur rom file (nk.nbf),ur radio file (radio.nbf) and click the himaupgradeut..
but u must sure there are enough battery (50% above) in ur device before upgrading..
just wait and relax(coffee,snack,etc)
ps:if u want a 30mb storage for ur device when using wm5 above,before upgrading u can use ExtROM unlocker and HIMA DOC Tools for repartition ur storage.
hope this will help
Click to expand...
Click to collapse
1.17 radio is most stable
Himaupgradeut_noID is safier, it works like normal update but does not check device orgin, so you can upgrade even chineese PPC For Chiineeesee hands himalaya too.

Some question about first flash

Hi guys!
I'm a new user and i wanna flash for the first time my opal t2223 with the pajerm's rom lite 21697 but i've some question:
1. i've downloaded a stock rom for this phone, for safety, and i found the .nbh file and a radio file,but in the rar file of pajerm's rom i found just the .nbh file, i need also the radio file to flash this rom on my phone or i can flash it without?
2. during the flash process sim card and micro sd must be inserted in the phone or is better that i plugout?
3.some backup of text msg,contacts and other from wm 6.1 created with spb backup work correctly if restored in wm 6.5?
thank you for helping me and sorry for my english
And sorry if i've posted in the wrong section XD

Rom flashed thx pajerm!!!

franciccio said:
Roma flashed thx pajerm!!!
Click to expand...
Click to collapse
So, did you manage to flash it without finding Radio?
If you may, post your steps as you did it so others can make use of it. And hope you enjoy your new OS

pajerm told me that the radio is part of the software that runs from near the peripheral and the interface with the operating system, it is not necessary to update the radio when you change a rom, because each type of PPC has its own radio i guess, infact i haven't found any problem during flashing operation by following guide from the first posts
I hope I was clear enough

wbadry said:
So, did you manage to flash it without finding Radio?
If you may, post your steps as you did it so others can make use of it. And hope you enjoy your new OS
Click to expand...
Click to collapse
i havent done anything extra for the radio, flash normally as in the posts... works fine so far...