I have a Tilt and the 510 Voyager headset. I'm wondering if there's a way to do the following two things:
1. When the headset is turned on and connected to the phone is there a way that I can make it so that I can still talk on the phone? It seems like when the headset is turned on that the microphone and sound is muted on the phone, so you have to use the headset.
I want to be able to use either the phone or the headset at the same time.
2. If I walk out of range of the headset while it is turned on, then walk back in range, can I set it so that the headset will automatically reconnect?
1. You can switch from the headset to the phone during a call. It is one of the options on the "call screen". I don't believe you can set it to default, but you can just turn off bluetooth if you want the default headset to be the phone.
2. The headset should automatically reconnect when brought back in range. Try pushing the "pick up" button on the headset. It should automatically re-pair in a second or two.
Related
Whenever I turn my Cardo S-2 a2dp stereo bluetooth headphones on, the headset bluetooth profile kicks in, and calls immediately go to the headphones.
Can this be done with the bluetooth stereo headphones profile for listening to music as well? Currently, I have to click on BatteryStatus's bluetooth icon in the systray, click on a2dp, wait for the profile to kick in, and turn the volume from vibrate to full. It's a pain in the ass every time I want to listen to music.
Ideally, if it's not built into the OS, there should be a little systray app that would poll to see if any headphones are within range, then automatically enable a2dp and set the volume for you. When they disconnect, it would go back to your previous volume setting, not just 0 volume like it does now.
I don't know about the Cardo's but when I hook up my Motorola S9 my music is automatcally hooked up as well. When you sinked your Cardo with your phone through the Bluetooth conection settings did you set them up as handsfree and Stereo, or just Handsfree?
kemp509 said:
I don't know about the Cardo's but when I hook up my Motorola S9 my music is automatcally hooked up as well. When you sinked your Cardo with your phone through the Bluetooth conection settings did you set them up as handsfree and Stereo, or just Handsfree?
Click to expand...
Click to collapse
Yes, it was set up as stereo (as well as handsfree), but music does not automatically play in the headphones when they are turned on. I have to start a2dp and take it off vibrate in order to play music.
Same problem here. I solved it by installing A2DPToggle, and making a shortcut to turn the music on the headset in the system tray through Traylaunch
I also use A2DPToggle and use the plugin that stays on the Today screen to control when I use it.
But just like this thread ( http://forum.xda-developers.com/showthread.php?t=351697 ) you can find all sorts of different options.
MBN
Hello,
I'm totally new in this area (android). I have a Galaxy s for a week now, and I am generally very impressed by the phone. There are two strange (or even stupid?) things about the phone:
1. I used to have a Nokia 6500 (it is not even symbian 60, it's 40). There is a menu called "enhacement" where you can adjust what calling profile will be activated when a headset, handsfree etc is connected. For example, when I connected the (nokia) phone to the bluetooth car handsfree the phone would recognize that a activate the "car" profile which I had created. The car profile in my case had a specific (quiet) ringtone (that was transmitted to the car's speaker) and had the phone vibration disabled.
Questions: Is there a way to create calling profiles AND that the phone activates a specific profile when connected to the car's bluetooth handsfree?
Is there a way to transmit the phone's ringtone to the car's speakers??
2. The second strange issue is that if I set an alarm and switch the phone off, the alarm will not be activated at alll!! The alarm only works as long as the phone is activated!!!
Thanx in advance
Hi,
I have a Blue-tooth hands-free set in my car.
Often I need to walk away from my car during a phone call.
It also happens that I am outside the car, a few yards/meters away from it when I make or get a call. when this happens the audio goes to the BT headset, but I can't hear it or be heard because I'm not near it.
So how can I make an ongoing call move from the BT headset back to my phone?
It has to be done from the phone only. No pressing buttons on the headset itself etc. (as I explained, I might be far from the headset and the car may be locked, etc.)
ThanX in advance!
Hi,
I have a Blue-tooth hands-free set in my car.
I often need to walk away from my car during a phone call.
It also happens that I am a few yards/meters away from the car when I make or get a call. when this happens the audio goes to the BT headset, but I can't hear it or be heard because I'm not near it.
So how can I make an ongoing call move from the BT handsfree back to my phone?
It has to be done from the phone only. No pressing buttons on the headset itself etc. (as I explained, I might be far from the headset and the car may be locked, etc.)
ThanX in advance!
I've been using a new bluetooth headset for about a week now, and suddenly it won't stay connected to my Pure. I have not done anything different to the phone to affect the bluetooth settings, and I've checked them several times anyway and everything seems normal.
I even deleted the pair with the headset, re-paired, but still the same results. The headset is properly recognized, it connects to the phone normally, but after about 20 or 30 seconds it disconnects.
If I turn on the phone's bluetooth, turn on the headset, then make a call after it connects, the call is properly routed to the headset but only for those first 20 or 30 seconds. What's worse is when the headset disconnects from the phone during the call it doesn't just revert the call to the phone's mic & speaker, it ends the call.
By the way, the headset is a NoiseHush N450, but I don't think the problem is with the headset because the same thing happens when I pair my phone to other BT headsets.
Any ideas?