Database Develop

Qtek 9090 would not update and is dead now

Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes

Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?

Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!

Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?

Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.

berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:

When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.

berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX

Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.

Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/

Cannot unzip the ROM image

Hello,
I would like to follow the procedure for customizing the splash screen as described here
http://wiki.xda-developers.com/index.php?pagename=Trinity_SplashScreen
At first, I didn't know where to get the program ROMUpgradeUt.exe, then I found (quite difficultly - sometimes the obvious for one is so obfuscated for the other one) that is contained in any ROM image. And that any ROM image is an archive. Well, I downloaded 2 Dopod ROM images, renamed them from .exe into .zip (and .rar) , but neither WinZIP, nor WinRAR is able to open the archive.
I remember doing it, could you please help with this issue ?
If you have any other advice on how to customize the splash screen(s), I would be very grateful.
Thank you all.

Please, could somebody help me with this ?

It is not clear what you want!
You should not be renaming any .exe files to .zip or .rar.
Try right clicking on the .exe file (dopod rom downloaded) and if you have winzip installed you will have a winzip menu in the context sensitive menu. - Choose Extract to - and extract the contents of the .exe to a folder.
You also will have extract to as an option on your right click menu if you have 7-zip (free) installed.
Once you extract the ROM you will have all the ROM and upgrade files. You can Now delete the .nbh file (the ROM) and replace it with the splash ROM .nbh file that you created using the instructions that you are following. (Use the same file name to be sure).
Now use the RUUtility.exe to flash your splash

Hi, thanks for the reply. I remember that last time I did the same operation I had to rename the file. I might be wrong. Anyhow, I'll try to do as you said.
Thanks again.

SETUP = XML document

When I press setup to install a programme it opens me an internet window with the commands on it and I cannot install it. What is the problem ?

i suspect you have downloaded a .cab file, which is associated with something like winrar so you have mistakenly extracted it and then tried to 'install'
BUT you need to copy the .cab to your phone and run the .cab to install the program
andy (yes i am talking from experience) T

Word! I agree, copy the whole .cab file to your Internal memory, just "double click" on it, and press "Yes". And btw, check again to be sure, if it is a .cab file!

there is no .cab file. Its a setup file ...

fixed it ...thanks

I have a HTC Fuze and CAB file not working.

I have a HTC fuze from att and I m trying to install application that have a .cab ext but no respond when I unzip and copy it to my phone. It direct me to the opera website. What shall I do?
I just bought an att HTC and I want to change the today screen and batter meter to %. Everytime i download a .cab file. i tried both zipping it and putting it on the phone and leaving it unzipped and putting it on the phone but everytime i file search for the .cab file it doesnt even show up on my device. How can i do this? thanks for the help!!!!
thanks

.cab installation...
If the cab is zipped (ie. it has .zip / .rar extension), unzip it on your desktop. If you're not sure if the file is actually a .cab file, right click and select 'Properties' - you can then see the actual extension and file type.
Copy the .cab to your device. Place it somewhere obvious, so you can find it easily (ie. the root of Internal Storage). Then on your device, locate the file and tap on it to install it. If it doesn't install this way, it's either not a .cab, or it's not designed for your device

Starting logo Diamond

Hi, i installed a ROM that change the starting logo from htc (the one that plays a sound). Can i change that again without change ROM. I want to roolback to inicial htc logo.

files to modify are Animated.gif and welcomehead.192.png in windows folder !
but I don't have original htc files...

goldfinger01 said:
Hi, i installed a ROM that change the starting logo from htc (the one that plays a sound). Can i change that again without change ROM. I want to roolback to inicial htc logo.
Click to expand...
Click to collapse
You should just have to replace the file in the windows directory. In most ROMs the file is called animated.gif. I have attached a copy of the original logo in the Zip file attached. If you want to change the startup sound, I have attached the original sound file as well. Otherwise, you can do it in the kitchen when you cook your personalized ROM.
Oh yeah, Don't forget to rename the file to the same name as the file already in your windows folder. Tell it to overwrite the file! If it says that it cannot overwrite the file, then the file was locked when cooked, & you're SOL unless you can cook up your own ROM.

it's locked , thanks anyway

goldfinger01 said:
it's locked , thanks anyway
Click to expand...
Click to collapse
You can try using Advanced Configuration tool http://forum.xda-developers.com/showthread.php?t=418151. It has a setting for changing these.