Battery status cab. is there a cool one out there???? - Tilt, TyTN II, MDA Vario III General

A good battery status plug-in is a must have ......please help?

http://soft.photoracer.net/docs/wktask_en.html
i like the battery gauge, and it also comes withalot of other cool features

Hi:
Mt favorite is Vistahide Battery Gauge.
It is very simple and doesn't take up precious today screen space. It is the very thin colored line at the top of my screen (see attached screenshot), the line is much easier to see in person, the screenshot seems to cut it off a little bit. The line starts to disappear and get closer to the red side, as the battery drains, which makes it very easy to see how much you have left.
PS: If you're interested I'd be happy to post exe file for you.

cincy1020 said:
Hi:
Mt favorite is Vistahide Battery Gauge.
It is very simple and doesn't take up precious today screen space. It is the very thin colored line at the top of my screen (see attached screenshot), the line is much easier to see in person, the screenshot seems to cut it off a little bit. The line starts to disappear and get closer to the red side, as the battery drains, which makes it very easy to see how much you have left.
PS: If you're interested I'd be happy to post exe file for you.
Click to expand...
Click to collapse
Batti does this too, and i'm very happy with it. You can optimize it by changing some settings - uncheck "always on top" because it doesn't play nice with pocket IE, and i like to make it thinner and wider - by default it's like 8 pixels tall, and has a 30 or so pixel margin on the left - i make it 2 or 3 pixels tall and have no left or right margins. it also indicates charging, low battery, etc. it's very customizable and the settings are easy. it's also free.
-Taylor

Facegarden said:
Batti does this too, and i'm very happy with it. You can optimize it by changing some settings - uncheck "always on top" because it doesn't play nice with pocket IE, and i like to make it thinner and wider - by default it's like 8 pixels tall, and has a 30 or so pixel margin on the left - i make it 2 or 3 pixels tall and have no left or right margins. it also indicates charging, low battery, etc. it's very customizable and the settings are easy. it's also free.
-Taylor
Click to expand...
Click to collapse
Sounds cool, I'll check it out too. The only thing is if you don't have it on top, then I guess you don't lnow how much battery you have when using IE? Vistahide does work well with IE, and other programs.

cincy1020 said:
Sounds cool, I'll check it out too. The only thing is if you don't have it on top, then I guess you don't lnow how much battery you have when using IE? Vistahide does work well with IE, and other programs.
Click to expand...
Click to collapse
It's only not visible in full screen mode, anything with a top bar shows it, i just checked. Is Vistahide free?
-Taylor

Facegarden said:
It's only not visible in full screen mode, anything with a top bar shows it, i just checked. Is Vistahide free?
-Taylor
Click to expand...
Click to collapse
Hi:
yes, vistahide is free.

Hi Mike:
I got your PM, here is the exe file for Vistahide battery gauge.
You just need to put the exe file on your phone, and click to run it. It will not install a program folder etc, so if You ever decide to ununstall it, you just delete the exe file from wherever you put it.
Also, if you want it to restart automatically after soft resets, you will need to make a shortcut of exe, and place it in Windows folder.
If you have any questions, just let me know

Hi, can you zip and post VistaHide here?

RemE said:
Hi, can you zip and post VistaHide here?
Click to expand...
Click to collapse
LOL, yes, that was my plan, but I completely forgot to attach the file
Thanks for reminding me

Perfect tool for me. Was looking for this about 2 weeks now.

kaiso said:
Perfect tool for me. Was looking for this about 2 weeks now.
Click to expand...
Click to collapse
Glad I was able to help

cincy1020 said:
if you want it to restart automatically after soft resets, you will need to make a shortcut of exe, and place it in Windows folder.
Click to expand...
Click to collapse
Not a programmer but I've worked through most adds to my Tilt. Got my TomTom working and the weather fixed on the HTC Home.
How do I make the shortcut of exe to put in windows? I love the gage and want it to always be there.

cincy1020 said:
Hi:
Mt favorite is Vistahide Battery Gauge.
It is the very thin colored line at the top of my screen (see attached screenshot), the line is much easier to see in person, the screenshot seems to cut it off a little bit. The line starts to disappear and get closer to the red side, as the battery drains, which makes it very easy to see how much you have left.
Click to expand...
Click to collapse
One similar gauge is LVM Top Bat from Molski. You can find it on google...

squidnomore said:
Not a programmer but I've worked through most adds to my Tilt. Got my TomTom working and the weather fixed on the HTC Home.
How do I make the shortcut of exe to put in windows? I love the gage and want it to always be there.
Click to expand...
Click to collapse
navigate to the file in file explorer, hold the stylus down on it, and push "copy". then, navigate to the windows directory, push "Menu" in the bottom right corner, and then push Xpaste as shortcut"
hope this helps...

mbarvian said:
navigate to the file in file explorer, hold the stylus down on it, and push "copy". then, navigate to the windows directory, push "Menu" in the bottom right corner, and then push Xpaste as shortcut"
hope this helps...
Click to expand...
Click to collapse
It did. Thanks.
Was looking for "send shortcut to desktop" type of thing instead. Works on resets now.

Related

T-mobile Wing Mod Requests :)

hello all, i have a couple requests (most likely has to do with registry editing)
1: Hide the top bar (time, and stuff)
2: Have a big invisible x button to close programs (no need for stylus)
3: Hide bottom bar (calendar/contacts) but still be able to use the soft keys to access them
thanks a bunch in advanced
nice request
those are some nice request. but if someone even tries to cook this rom then we should think of giving them a donation for their work dont you think?
persianprez said:
hello all, i have a couple requests (most likely has to do with registry editing)
1: Hide the top bar (time, and stuff)
2: Have a big invisible x button to close programs (no need for stylus)
3: Hide bottom bar (calendar/contacts) but still be able to use the soft keys to access them
thanks a bunch in advanced
Click to expand...
Click to collapse
As taken from my guide:
Can I get rid of the "Contacts / Calendar" bar?
Dcino Bar is a great app to get rid of it. Simply place this app in your Windows/Startup folder, you can download it Here
Click to expand...
Click to collapse
you can still use the keys on the phone to access the "contacts or calendar"
thx a lot tyler, it worked great, is there anyway to make it invisible for all programs as well?
One of the Rom Cookers need to keep these ideas in mind...
Maybe have a version out which is fully powered by the touch cube and pocketCM default. Its becoming more smoother to use as a regular phone and I can see my calendar on the main screen!!!
i actually prefer a software solution rather than loading a new rom
megaman81 said:
One of the Rom Cookers need to keep these ideas in mind...
Maybe have a version out which is fully powered by the touch cube and pocketCM default. Its becoming more smoother to use as a regular phone and I can see my calendar on the main screen!!!
Click to expand...
Click to collapse
The author of pocketCM asks that it not be included in ROMs.
Ugh... yes! I want a big x button so I don't have to turn my finger and slide it up in the corner to hit the x.
WM5 on the older PALM devices have the X button moved to the left so it's not up against the edge; can we do that on the thing by editing the registry somehow?
kraftey said:
Ugh... yes! I want a big x button so I don't have to turn my finger and slide it up in the corner to hit the x.
WM5 on the older PALM devices have the X button moved to the left so it's not up against the edge; can we do that on the thing by editing the registry somehow?
Click to expand...
Click to collapse
finally some1 who feels my pain lol, taking out the stylus just to hit the x annoys me
bump, still want that big invisible x =]
Maybe this will help:
http://forum.xda-developers.com/showthread.php?t=386378
Or papamopps rom... been using it for the past week and love it.
http://forum.xda-developers.com/showthread.php?t=396036
kraftey said:
Ugh... yes! I want a big x button so I don't have to turn my finger and slide it up in the corner to hit the x.
WM5 on the older PALM devices have the X button moved to the left so it's not up against the edge; can we do that on the thing by editing the registry somehow?
Click to expand...
Click to collapse
I use FTouchSL to do this. I made the top left active corner a close option so it closes the application thats open. You can set how many pixels it is & the amount of time it takes to activate. It works perfectly
Beast84 said:
I use http://www.ftouchsl.com to do this. I made the top left active corner a close option so it closes the application thats open. You can set how many pixels it is & the amount of time it takes to activate. It works perfectly
Click to expand...
Click to collapse
This looks really tight, ima try it out, I dont feel like going through the whole rom thing again, im sticking to manufacturer settings, although i might change the pool size thing again

Ultimate Launcher - another Touch Interface

I tried this new application on my wing and I am just loving it. Thought I should share with someone who may be interested.
Here is the video from another thread in the forum I picked this application from.
http://www.youtube.com/watch?v=-bNtHCOpZlQ
It really is cool with amazing customization.
More info here :
http://forum.xda-developers.com/showthread.php?t=365334
FAQ
=====================
Just FYI.. Here are some FAQ's..from the original thread. Just saving time in searching stuff, I have attached a few cabs as well :
Where else can I get Ultimate Launcher from?
http://www.ultimatelaunch.de/
Where do I get the touch-commander from?
www.touch-commander.com
-------------------------------------------------
Instructions from MaxMotus :
Part 1 - Touch Commander
Install Touch Commander and edit the FtouchFlo config file. The options for left and right scroll are blank. I set "Right 2 Left" as Action Screen and "Left 2 Right" as Comm Manager.
"Down 2 Up" opens Touch Commander Standard and "Up 2 Down" minimizes the program currently active.
Obviously configure Touch Commander Layout and icons to suit yourself. My icons that i used in Touch Commander are png format stored on storage card. I got some of mine from Alienware skin. Basically converted the ".ico" files to png
Part 2 - Ultimate Launch
Install Ultimate Commander and take time to edit play with settings. You can spec tab size by pixels (i used 40) and placement. Then you can spec total pixel size that the Ultimate Launcher plugin uses on desktop (includes tabs). I set @ 200 which lines up perfectly with the wallpaper i use. So when you change tab it moves everything between the tabs at top and the glass bar at the bottom. ie Tabs and glass bar stay static.
I used as plugins, HTC home which fits perfectly between the Tabs and Glass Bar at bottom. The Next Tab is SPB Pocket Plus with short cuts and system items. On the Third Tab I used SPB Weather and on the final tab i had short cuts using Ultimate Launch.
Tab placement can be top or bottom of the Today plugin so you could put them at the bottom of page like iphone. If you want to hide the tabs totally and just use the Cube / Slide change of tabs then set Tab size to zero.
Ultimate launch icons are in standard .ico format 32x32 or 48x48 for the animated size! So you can easily make or edit icons!
You can have as many tabs as you like I just chose 4 as i was using cube style change. And you can use all the normal today style plugins via settings. Each tab can have its own gestures regarding launching apps. I set mine same for less confusion, basically stroke down on tab panel for PocketCM.
----------------------------------------------------------------------
how did you manage to get the htc home tab plugin in between ultimate launch space?
The HTC Home needs 160 pixels so you need to set the pixel size in "Ultimate Launch" to use 160px + tab size. In my case my tabs are 40px so my overall px size for settings on Ultimate Launch are 200px (Config, Display Tab, "Fixed Plugin Height")
To add HTC Home plugin, (Config, Display Tab, "Tabs") when you have created a "Tab" you can click on "change" and add from the list of today plugins!
----------------------------------------------------------------------
Where do I get the theme which is in the Video?
Attached - Theme.zip
You can use your own customized avatar.
Attached - Blueflameza9.zip
For those who want to use the gif for S2U2
----------------------------------------------------------------------
How Do I get the HTC Home and HTC Weather as Tabs?
Go to UL config and Add a New Plugin, Select the Application
----------------------------------------------------------------------
I managed to use the HTC home like you did, but unlike the top portion of your ultimatelaunch tab, mine has arrows to the sides. I am assuming that it's indicating the that I have more tabs to the left/right. Is there any way to get rid of it? How did you make it so that yours doesn't show any arrow? Is it because you only have 4 tabs?
Go into Config and the headers options.
Make sure "Visable Headers" is equal to or great than number of tabs you have setup.
----------------------------------------------------------------------
Which battery monitor do you use? The one in the taskbar with percentage as well...
http://forum.xda-developers.com/showthread.php?t=321733
----------------------------------------------------------------------
Anyone knows how to add Bluetooth and Wifi .ink into the launcher??
Attached SmartUtilities+Shortcuts.CAB
----------------------------------------------------------------------
loghash said:
I tried this new application on my wing and I am just loving it. Thought I should share with someone who may be interested.
Here is the video from another thread in the forum I picked this application from.
http://www.youtube.com/watch?v=-bNtHCOpZlQ
It really is cool with amazing customization.
More info here :
http://forum.xda-developers.com/showthread.php?t=365334
Click to expand...
Click to collapse
Looks like it will be fun to mess around with. Thanks for sharing.
JLine05 said:
Looks like it will be fun to mess around with. Thanks for sharing.
Click to expand...
Click to collapse
Ya,
I tried it out about a week ago and was going to add it to open touch v3.0, but did not have time..
I might include it in v4.0, but not sure yet. Also, I think I better ask the developer of the apps first as well...heeh
wow that definitely looks sweet, thanks for the heads up man
i wonder how smoothly it'll run on the wing though.....
ttran001 said:
Ya,
I tried it out about a week ago and was going to add it to open touch v3.0, but did not have time..
I might include it in v4.0, but not sure yet. Also, I think I better ask the developer of the apps first as well...heeh
Click to expand...
Click to collapse
Tat sounds nice! Would love to see this with Open Touch. One thing you may wanna consider before including is that if this app is not activated, it will have "not activated" on the application once in a while. It doesn harm but I am sure you will find a way to eliminate that
mapleman321 said:
wow that definitely looks sweet, thanks for the heads up man
i wonder how smoothly it'll run on the wing though.....
Click to expand...
Click to collapse
Its running real smooth on my Wing. I am running my wing at 247MHz with Open Touch Biggy 3.0. Tweaked it a little with modified icons., its as good as the one in the video now!
where do you get the original icons for the TouchFlo???
Tried it on my Wing. Really Cool. I like it. Its fun to use. Thanks!!!!!
I Like it --- I Love it --- I Need Some More of it ...........
Activation
loghash said:
I tried this new application on my wing and I am just loving it. Thought I should share with someone who may be interested.
Here is the video from another thread in the forum I picked this application from.
http://www.youtube.com/watch?v=-bNtHCOpZlQ
It really is cool with amazing customization.
More info here :
http://forum.xda-developers.com/showthread.php?t=365334
Click to expand...
Click to collapse
I tried messing around with the activation screen, and 1 2 3 4 5 works as a successful activation code!!!! just incase anyone else hates thae not activated on all four corners!!!
^ Thanks KHOFFICE, hope it stays that way!!
Excellent app... This is as close to a Touch/Cube as you can get without Flashing!!
atlaswing said:
^ Thanks KHOFFICE, hope it stays that way!!
Excellent app... This is as close to a Touch/Cube as you can get without Flashing!!
Click to expand...
Click to collapse
This is way more useful than the Touch Cube, and I was a fan. This seems to be working great so far and it doesnt seem to use much memory.
JLine05 said:
Looks like it will be fun to mess around with. Thanks for sharing.
Click to expand...
Click to collapse
Anytime! Cheers!.. I see that you have your screen image changed with this app..! looks kewl
roman2113 said:
This is way more useful than the Touch Cube, and I was a fan. This seems to be working great so far and it doesnt seem to use much memory.
Click to expand...
Click to collapse
Yeah! Bingo..! Small Cab file as well.. And I was most impressed with the amount of customization.. with Animation.. Display.. Application.. Icons.. I was like.. Woww!
Is there a way to put built in Calendar and Tasks today plugins into one of the tabs in Ultimate Launcher?
grabiarz said:
Is there a way to put built in Calendar and Tasks today plugins into one of the tabs in Ultimate Launcher?
Click to expand...
Click to collapse
From what I saw you can use any plugin. When you go into the config click new and select Today-Plugin. You should be able to add it there.
khoffice said:
I tried messing around with the activation screen, and 1 2 3 4 5 works as a successful activation code!!!! just incase anyone else hates thae not activated on all four corners!!!
Click to expand...
Click to collapse
This didnt work btw...Its a good app though so I'll put up with the message.
WiFI and Bluetooth:
for bleutooth toggle = CicleBT.cab
for wifi there is also a wifitoggel.exe somewhere. i´ll post when i´m home...
BUT please keep in mind: IT is NOT freeware.... so including into a rom would make people have to buy a licens
I stay with O2plus (modified) i can set tabs for shortcuts - that´s enough for me...
thanks for posting.
I tested it: but as far as i cannot find more than 6 shirtcuts that i really need on screen.... and in loss of todayplugins that i do not use..... i relly don´t need it. BUT it is customizable very fine...
AND indeed much better than cube!!!
I had it running under my Batterystatustheme.... 200pix high with todayagenda and shortcuts....
zcink said:
Tried it on my Wing. Really Cool. I like it. Its fun to use. Thanks!!!!!
I Like it --- I Love it --- I Need Some More of it ...........
Click to expand...
Click to collapse
Heheh.. I know . With the amount of memory it takes..I kinda thot you will!..
not activated message is not there when you don't use Cube
I know the Cube is popular but if you uninstall the cube, you don't get the not activated messages. This app is pretty cool even without the Cube. I personally do not like the cube so I don't use it, but I tried it with and without the cube installed and noticed this. Just thought I'd pass it on.
Also, the Cube takes alot of memory, but without it, this app takes very little.
zcink said:
I know the Cube is popular but if you uninstall the cube, you don't get the not activated messages. This app is pretty cool even without the Cube. I personally do not like the cube so I don't use it, but I tried it with and without the cube installed and noticed this. Just thought I'd pass it on.
Also, the Cube takes alot of memory, but without it, this app takes very little.
Click to expand...
Click to collapse
Thanx for sharing! am trying this now

Is there such a thing???

Is there an application that acts like a Windows Desktop Taksbar? something that can hide at the bottom of the screen ?
I'm having a problem getting my applications to close when I hit "X" it stays running and it's difficult to switch between apps... I'm hoping someone has some suggestions.
Thx.
TW,
http://www.ppc-welt.info/community/showpost.php?p=983760&postcount=3186
like that ?
beige said:
http://www.ppc-welt.info/community/showpost.php?p=983760&postcount=3186
like that ?
Click to expand...
Click to collapse
Dont think he's interested in bananas.
ok.........................
http://soft.photoracer.net/docs/wktask_en.html
Thanks, is it possible to have the open application list go vertical instead of sideways on the task bar? The more apps you have open the smaller the buttons get, makes it tough on the fingers...
TW,
If I understand correctly, this may be what you're looking for http://www.dinarsoft.com/handyswitcher/. You can map it to a hard button, in my case the "ok" button, and it will scroll down vertically. You can either close one or all running programs or switch between them. Hope this helps.
Z
Very Good Very Good
ekw said:
http://soft.photoracer.net/docs/wktask_en.html
Click to expand...
Click to collapse
Very Good Very Good

BackLight brightness adjust command line utility for Kaiser aka TYTN II

I dunno if I'm only one who has this problem but when I'm occasionally on sun I can't see nothing on my Kaiser and it's really difficult to setup backlight brightness on touchscreen which u can't see.... So I've been looking alot if there is some utility which I can link with button or gesture and I haven't found anything... So I've wrote my own utility. Feel free to use it as well if u find it useful -> http://lobster.ic.cz/?page=bl
is this useful or is there easier way to do that??
Been searching for an app like this for a week.
Works great!
Thanks.
Here's another program that gives you a today plug in for it:
http://forum.xda-developers.com/showthread.php?t=412896
I'll b trying yours tho as I like the idea of UL with icons for up and down
Cheers,
Matthew
I made a cab with this program mapped to the PTT button. I have a AT&T Tilt, Im not sure if your phone has a PTT button or if its called something else or whatever.
With this, just run the cab then I tap the button and it changed the brightness really quickly, no menu or anything, I love it! If I walk out into the sun I just tap the button 3 times and my screen is bright.
Lobsterii, I love this program thanks a ton!
I'm glad that I could helped u out guys... actually there might be more funny stuff possible only if HTC release some documentation on theirs DLL files cos it's pain to guess arguments...
you did it all by guessing? I figured you would have decompiled the dll.
Truly excellent! I have also been looking for something like this for a long time.
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Thanks again for a useful app!
you did it all by guessing? I figured you would have decompiled the dll.
Click to expand...
Click to collapse
I've read some forum where someone pointed out that backlight function should be in some dll by HTC dunno where it was... Then I was googling "dll find export function" and I've found prog "DLL Export Viewer" which can show function names in dll. Unfortunatelly there is generally impossible to find out how many/what arguments the function has. So I've found function name like HTCUtilSetOnBatteryBrightnessLevel and I've simply try prototype int HTCUtilSetOnBatteryBrightnessLevel(int); but it crashed... so I keep going like int HTCUtilSetOnBatteryBrightnessLevel(int*); and it worked... voila...
pudifoot said:
Truly excellent! I have also been looking for something like this for a long time.
Click to expand...
Click to collapse
thx alot...
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Click to expand...
Click to collapse
done. + it's now compiled as an release version so it actually has 50KB less than old version... enjoy it's at the same place instead original files http://www.lobster.3web.cz/bordel/bl/index.htm...
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Thanks for implementing the feature I was looking for. A perfect application - it's small and fast, and it gets the job done with excellence.
Thank you. Works perfectly.
silentanvil said:
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Click to expand...
Click to collapse
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
lobsterii said:
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
Click to expand...
Click to collapse
Awesome! Thanks so much! I've also been looking everywhere for something like this!
Awesome!
Well done! I've been looking for ages for something to do this.
How to use bl02...
Something from lobsterii that helped me:
create link in Total commander (file manager) I think its in options "File -> >>>>> -> Create shortcut" then I have another file bl02.lnk then I open properties of the lnk file, I click tab shortcut and put the text of path into "" and after it I wrote parameters so it looks like
"\Program files\bl\bl02.exe" 1 3 9
OK dumb question and first time posting so don't slaughter me. If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct? Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display? If you get far enough to open the utility then its not that hard to move the brightness up. Sorry for the dumbness of the question.
volleykinginnc said:
If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct?
Click to expand...
Click to collapse
my bl02.exe doesn't put any button anywhere... it's just app which actually toggle brightness. U can try to run it via file explorer it should change brightness...
volleykinginnc said:
Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display?
Click to expand...
Click to collapse
There is plenty of programs to map this app to buttons, finger swipes and some other crazy stuff like voice commands etc.. For example I'm using FTouchFlo (u can use FTouchSl which is easier to configure) and map backlight change for finger swipes... Most easy way is just copy blXX.exe to /Windows/Start Menu/Programs/blxx.exe and then go to Start->Settings->(tab)Personal->Buttons and link it with some buton...
I'm just now at work so have no time for more explanation... but Once I get home I'll create some FAQ at download page cos... cos it'll be easier for all of us
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
volleykinginnc said:
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
Click to expand...
Click to collapse
I'm sure he won't be able to bypass A_C's S2U2, but (assuming you have a Kaiser, you didn't say) if you enable dpad in S2U2 you can always hold your right dpad button to make sure S2U2 is unlocked, even if you can't see the screen, and then hit the button for the "bl02.exe 9" link.
Ha ha...you guys are awesome! Right Dpad enabled and now it works like a charm even in the brightest sun!! Thanks for the great application...makes a big difference in usability.
Some of you experts ought to make a list of these application gems (this program/kaeser tweaks etc) to make it easy for the noobs like me. This is good stuff!!

TF3D & Battery Status

Hello guys,
This forum is awesome, it is like make a a wish, and it comes true
now I have a question, the battery status has a great feature of showing the CPU load under the clock on the top bar. thru that i can really see if the device busy doing something!
but this is working only when I disable the TF3D. does anyone know how to get that working with the TF3D?
is it also possible to have the other indicator of battery status, they were very useful. The TF3D is taking the whole screen leaving no space for anything else
cheeers!
as far as i know what you want isnt possible... sorry...
until someone comes up with a modification of tf3d that is...
but until then i`m afraid you must look onto alternatives..
for example:
what i did:
installed mortscript, making it able to run scripts..
installed a script wich made it swap between tf3d and today.
bound a hardkey to this script, whenever i hold down this key is promts me the question to change, if i want, i click ok, and it shuts down tf3d and goed to the original todayscreen... holding this key again it does the opposite.. thus starting tf3d...
now ive got the best of both worlds...
i like this solution far more then secondtoday, this way its even frees up ram because the manilla.exe is really shut down..
all plugins like homescreen++ (formely batterystatus) stay active this way... unlike when you just untick the tf3d in "items" wich will leave yoe with a blank today over and over..
thank you for ur answer, that is also takes time to switch between both applications, the niche thing in the battery status, is just one can see system status without pressing anything!
@ Make a search for " FinixNoverBattery.Cab";see here.
It shows you the status of the Battery and your connection.
greetz
pego2007
pego2007 said:
@ Make a search for " FinixNoverBattery.Cab";see here.
It shows you the status of the Battery and your connection.
greetz
pego2007
Click to expand...
Click to collapse
yes treu,
but it doesnt show any other information that was already shown in tf3d. only a more precise indicator for the batterystatus..
only way i could think of would be seriously changing the tf3f itself to show some stats... maybe a exta tab could be made by someone...
quark1980 said:
as far as i know what you want isnt possible... sorry...
until someone comes up with a modification of tf3d that is...
but until then i`m afraid you must look onto alternatives..
for example:
what i did:
installed mortscript, making it able to run scripts..
installed a script wich made it swap between tf3d and today.
bound a hardkey to this script, whenever i hold down this key is promts me the question to change, if i want, i click ok, and it shuts down tf3d and goed to the original todayscreen... holding this key again it does the opposite.. thus starting tf3d...
now ive got the best of both worlds...
i like this solution far more then secondtoday, this way its even frees up ram because the manilla.exe is really shut down..
all plugins like homescreen++ (formely batterystatus) stay active this way... unlike when you just untick the tf3d in "items" wich will leave yoe with a blank today over and over..
Click to expand...
Click to collapse
Hey man
Sounds great.
Can you post the script please
I dont really understand why the TF3D is blocking the indicators of the battery status under the clock on the upper taskbar, they are shown on the top of all windows, not only on the today screen. iam here concerned in the CPU load indicator?
Check
http://forum.xda-developers.com/showthread.php?t=401907&highlight=secondtoday
That will be do the trick allowing you to INSTANT-change between tf3d and "normal" today.
The first time you open it all today plugins must be loaded so it takes a little more time (like 4 seconds in my diamond... but the time depends on the number of plugins u want to load) ... but after first load the change takes 0 seconds... u can use a mapped hardware button or through your "most viewed" apps (big icons) in the start menu .... or whatever way ....
I'm using it in my diamond and works perfect !
By the way ... the creator of secondtoday is the same as batterystatus
sorrowt said:
I dont really understand why the TF3D is blocking the indicators of the battery status under the clock on the upper taskbar, they are shown on the top of all windows, not only on the today screen. iam here concerned in the CPU load indicator?
Click to expand...
Click to collapse
They are not talking about seeing the status of their battery, they're talking about displaying a software called 'batterystatus' on their today screen
TFT3D & Battery Status
The software batterstatus `now renamed to homescreen plus plus.
With secondtoday and homescreen ++ you can show several systemparameter eg. battery,temperature,hd etc. (see my attachments)
you can find the program here:
http://www.chi-tai.info
greetz
pego2007
pego2007 said:
The software batterstatus `now renamed to homescreen plus plus.
With secondtoday and homescreen ++ you can show several systemparameter eg. battery,temperature,hd etc. (see my attachments)
you can find the program here:
http://www.chi-tai.info
greetz
pego2007
Click to expand...
Click to collapse
Hi bro, I'm quite interested in the batterstatus app. does it compartible to Omina phone? Me actually looking for green battery fix and I don't really like FInixNOver VGA Battery ....cos not really compartible to Omina...Hope bro u can help me...
ok i installed the SecondToday with the homescreen++, and ---> AWESOME!!!
guys u r great thank you
Thats a message from a omnia900 user to ikarus(chi-tai).
I am using your wonderful program on my Samsung i900 omnia. But have the following problem.
In the settings for second today I assign the right soft key to SecondToday. Then I click on Apply to Registry. This works fine and I can toggle between my first and second today screen using this soft key.
You can find more in his forum,see attachment.
pego2007 said:
Thats a message from a omnia900 user to ikarus(chi-tai).
I am using your wonderful program on my Samsung i900 omnia. But have the following problem.
In the settings for second today I assign the right soft key to SecondToday. Then I click on Apply to Registry. This works fine and I can toggle between my first and second today screen using this soft key.
You can find more in his forum,see attachment.
Click to expand...
Click to collapse
Thank u bro so meaning this wonderful programme works fine with Omina
Btw I dont understand " But have the following problem. In the settings for second today I assign the right soft key to SecondToday. Then I click on Apply to Registry. This works fine and I can toggle between my first and second today screen using this soft key. " What does it mean sorry I'm new to Pocket PC phone hope bro u can guide me slowly. Thank u so much.
Bro Pego2007,
There are too many of this app in that website which one shall I choose ?? Really sorry abt this as I'm new to this sorry ...
On this side from chi-tai :http://www.chi-tai.info/discuss
you can find all answers of your question, or make a search for ikarus(nickname of chi-tai) on xda-developers.You can also make a search for homescreen plus plus on xda-devs.
greetz
pego2007

Categories

Resources