Related
Short question, maybe someone knows. If I want to add a new Server in MMS Configuration the [New] button is not responding.
How can I re-activate this button.
anyone, help would be appreciated.
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
_Nomad_ said:
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
Click to expand...
Click to collapse
Yes I guessed that one, therefore I was hoping to get some "other" advises before I hard-reset and notice the same.
I would search for a cab named "Set_up_MMS_folder" in before going back that far. You already have a folder, but reinstall could help fix whatever you are missing.
Good luck.
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
_Nomad_ said:
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
Click to expand...
Click to collapse
No it didn't work, I was re-installing my phone. I installed my normal things, as always, like spb today etc. This time I flashed the std T-mob ROM because I was a little tired of all the small problems I had with the home-cooked and now this...........
The mms folder and everything I have, it's only the stupid button which doesn't work.....
........It's there, but even he color shows it's not active.
Im seriously starting to believe the so called gurus in here arent exactly up to snuff ....so to speak. your problem is simple... you have to browse to regedit..somehow(!! can you figure that out?)
oh, just got it:Total commander, tap the two dots in far right (..)
tap the root (\\)
tap registry/hklm/software/arcsoft/...MMSUA/CONFIG/UI/
DRUMROLLLLLLLLLLLLLLLLLLLLLL... now YOU figure out which setting to enable!
nah, it should be EnableServerEdit ...i think, change the value to '1'
voila
THIS DOES NOT MEAN MY MMS IS WORKING...... I HAVE A PERSISTENT PROBLEM BEING UNABLE TO SEND MMS & everyone is CLUELESS!!
aaaaarghhhhhhhhhhhhhhhhh I WANT TO DIE!!!!!!!!! lol
ifull, thanks for the advise, this did the trick. Thanks again, I'm not into registry editing.
I think my problem, as you said, was so simple that the experts thought I would figure this out by myself, LOL.
Thanks again, if I can help you in someway, please PM.
What are the right mms settings
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
settings
here are the settings that should be there according to tmo website - http://support.t-mobile.com/knowbase/root/public/tm21387.htm
on mine those are right but what I think the problem is this, when mms is sending it keeps getting interupted by gprs trying to connect. is there a reg hack to let mms send without being disconnected????
I believe in regedit there are some errorlog.txt files that show you the WHOLE transcription of your attempted outbound messages. If I find mine, I will post it as it shows where the delivery went wrong.
so are you trying to say your 'mms fix' of a day or so ago is not quite "fixed" or what?
re:
this whole mms thing is starting to make me feel like its a tmo network issue and not the device, just never know...but I did flash my rom to X's 2.26 w/ 2.47 radio
mms fix i think
once u hak the reg and change the setting as listed earlier to allow settings edit... click on tmobile mms settings and it should show the settings that were downloaded from tmo...but u want to change the option that says connect via mms --) to connect via data..
I just did that and it sent right away...
it works, click on the tmobile mms server and then change the connection to via data instead of mms... I just sent a message to my self and it sent it out my outbox in less than 30sec for a 75k file
robpet2 said:
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
Click to expand...
Click to collapse
I think the settings are operator dependend
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
Click to expand...
Click to collapse
Yes thanks again, I had to do some regedit fixes, like I deleted the whole tree below what you mentioned. Now I'm able even to set as default.
I renamed the thread, because I know a lot of people have problems with MMS.
error log
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
Click to expand...
Click to collapse
yep I got error log msgs but it still send the pics
Thanks!!
More proof how valuable the information shared here can be.
Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,
Theoretically it is possible as the radios and sim cards should be compatible.
However, the Softbank AP for the flat rate data plan has not been cracked. Yet. There are a few people with Treo 750s that are also interested in seeing this password revealed - as well as me. I would like to try the Libra - or perhaps even the Omni or Wings (when and if they debut) if they have the right radios.
If you don't mind paying more for data, then the expensive/slow data connection to Softbank is possible.
RayB said:
Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,
Click to expand...
Click to collapse
Here's the interesting thing. Ordered a Kaiser from UK via DHL (delivered in 3 days!) and today when I stuck in my Softbank SIM, I found that the Kaiser (TytnII) software automatically detected that I was on Softbank and automatically installed the connection settings for Softbank. I am able to surf using that auto configured connection though I cannot confirm this is the connection that uses the flat rate 3G thing. More investigation needed.
There's been tonnes of posts on how people can setup a link using software/hacks/whatever to access the flat rate software package but haven't had enough time to check it out.
At the moment, except a direct HSDPA (as indicated by the icon) internet link, there's no MMS or SMS (!) so I need to figure out why; latter might be because MMS and SMS seems to share the same mailbox now so maybe because I've not setup mms as yet, even SMS won't come in
Boy, why has everything in Japan got to be so complicated...
Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.
Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich
ofiaich said:
Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich
Click to expand...
Click to collapse
Ofiaich - no, no, don't worry about the off-topic post.
And you don't ever need to be scared of modding your phone as long as you have a backup utility. I recommend SPB Backup, but some are fond of Sprite.
The Kaiser is a relatively new device so you are kind of flying blind. However, since both machines run WM6, many of the same packages should be viable. Let's start with the directions found in Make your X01HT a WM6 Device (for Gaijins)
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
I believe that these files are generic for WM5/6, and that they should work on any QVGA machine. The picture from Asukal's page shows them working on an Alpine, so they are not specific to Hermes.
The following directions however, might be specific to the Hermes, as they are registry settings for the keyboard. The above packages should actually automatically change the two HKCU registry entries below.
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/show...keyboard+x01HT
Click to expand...
Click to collapse
I am really interested in helping you (i.e. using you as a guinea pig) as I am also interested in importing different devices for use in Japan and need Japanese support.
thanks very much larsuck !
I sent you a PM !
I have found some of those pages before! I am an absolute beginner for Windows Mobile so some procedures are a bit daunting !
I hope to get a TyTn II very soon ! Saving up and trading old phones etc!
I will read your links again thoroughly and come back to you!
Ofiaich
I purchased Kaiser.
There was environment I displayed Japanese, and to be able to beat against Japanese with Atok.
I tested SB in Kaiser with usable ConnSBM_ORE2h.zip, but Password was not formed.
I think that Password is made if I do not understand that I make ORE2cert.cab for Kaiser, and it is possible for this.
Maro,
So, let me just make sure I understand: you have a Kaiser, and that the Kaiser can read Japanese, and that you can input Japanese using third-party software called ATOK.
That is good news for our friend ofiaich.
Now, I understand you tried to install Softbank's flat rate connection set up using ConnSBM.cab, ORE2cert.cab, Out.xml, and WIFIwake.exe, all four of these files being the ones used for the Hermes. (There is also a package for Universal called ConnSBM_ORE2u.zip.)
And you say that you can make a ORE2cert.cab for Kaiser and if you do that then the password will be made?
If that is so, then that is great! But I have a feeling that you don't need a new ORE2cert.cab. The ORE2cert.cab for the Hermes and the ORE2cert.cab for the Universal seem to be the exact same file.
larsuck said:
Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.
Click to expand...
Click to collapse
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Installed MMSlite and ended up having constant irritating reports that storage memory is full! No way MMSlite can occupy so much memory! Anyway, ended up having to hard reset. Once reset, this time I installed CE Star to provide japanese font support and then installed MMSlite. Worked a treat. Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something. Next is to find how to get access to the flat rate connection so time to dig the archives...
Any other fellow Japanese Kaiser users who can share some experiences?
Thanks Larsuck for the comments and tips....
dajtw said:
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Click to expand...
Click to collapse
Well, that's a bummer, but as Softcrank keeps their flat-rate settings top top secret, it was also to be expected.
Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something.
Click to expand...
Click to collapse
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Next is to find how to get access to the flat rate connection so time to dig the archives...
Click to expand...
Click to collapse
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.
larsuck said:
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.
Click to expand...
Click to collapse
Thanks for the info relating to MMSlite; think I have build 275 so could give it a shot I guess.
My Kaiser did indeed have the joined SMS/MMS box prior to installing MMSlite; post-installation they're still joined. What type of trouble did you have just out of curiosity? I've yet to have any issues.
Bummer, thought there existed some means of generating the password etc etc using some really convoluted means of installation in xda forums? So I take it there currently exists no means of accessing the Softbank flat rate connection outside of using the original Japanese mobile? I thought there was a post that would auto-populate the password field after the convoluted setup?
Yes, there is a convoluted process like that. Unfortunately, it depends on an .exe file called WIFIwake.exe that is device specific. There is an .exe for the Hermes and one for the Universal - none for the Kiaser yet. If you would like to try either of those links, they are
here
If you have the knowhow to delve into an .exe file and make the right changes (I have compared the files and there are only two changes to make it seems), I know you will make more than a few people happy. Needless to say, I don't have any idea how to even start editing programs.
I have been searching, trying to find a work around for a couple of months now. At first, I had been looking for the password itself, but I don't know that it is such a good idea for the password to get out. That's what happened before, and in response Softbank closed down that access point and switched to the current one.
So, now I'm looking for a solution in the form of a .cab or registry hack - one that can be used on a wider range of machines. If and when I succeed, I will post to this form and you can give it a shot.
I tried two ROMs with the SMS/MMS joined mailbox. The first one was Black Satin, and on that ROM the SMS wouldn't send or recieve. I didn't even keep that ROM long enough to check MMSlite. The second ROM was T-Lite by edhass. That ROM had no problems sending and recieving SMS, but when I installed MMSlite it created a separate mailbox called MMS1. So, everytime I would go to send a MMS, it would automatically try to send it using the joined SMS/MMS settings and it wouldn't go through. So, it wasn't that it didn't work, it was just kind of a pain in the ass.
Hi!
ordered the TyTn II and, with luck, it should be with me tomorrow!
At the latest Monday before 1.00pm!
I am an absolute beginner with Windows Mobile, and yes, I will RTFM thoroughly and also search and search.....
But if anyone can help with like an Idiots Guide to Installing Japanese, I would be grateful!
larsuck, I have downloaded the files that you told me about, from the post on the 19th!
Good weekend for all!
Ofiaich
Patched WIFIwake from Chaimd
Huzzah! Huzzah!
Chaimd has apparently patched WIFIwake to work for Kaiser!
With this, Kaiser users should now be able to get the flat-rate Softbank connection working.
First, here is the thread where Chaimd first posted this info and the patched WIFIwake: http://forum.xda-developers.com/showthread.php?t=298031&page=11
Read it first, because there is something about CID-unlocking the Kaiser and memorizing the Pre-unlocked CID. I will alert Chaimd to this thread and hopefully he can answer questions.
Thank you, larsuck. I'll try to explain the working WIFIwake.exe on Kaiser, in my terribly poor English.
Now, we can connect to the flat-rate Softbank access point, to patch and sign WIFIwake.exe.
That WIFIwake works copmpletely on my Kaiser. But that method depends on;
Pre-Unlock CID must be known!
CID unlocked, I used Pof's Hard-SPL.
Patching WIFIWake.exe;
01C760h "KAIS1300KAIS1300", 16 chars in UTF-16.
01C784h Pre-Unlock CID, 8 chars in UTF-16.
01C798h Pre-Unlock CID, 8 chars in UTF-16.
Self-Signing WIFIwake.exe
To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file.
If you understand Japanese, you can get some informations of Kaiser & WIFIwake in this blog;
http://d.hatena.ne.jp/chai99/20071008
Now if you don't mind me asking, how do you use a non-japanese sim based phone on softbank with a data contract (not technically) but actually like go about it? As i go back and forth between japan frequently and in ~6 months will be moving there again for a year or two. Last time i lived there, I never had a mobile. Times change and now i need one for sure while there. I'd love to use a Kaiser that I have on hold at AT&T (can get it completely unlocked...). I thought they don't give SIM cards on there pre-paid phones...
@Philz,
If you get a cheap phone from softbank with a voice plan, you can use the sim card from that in your Kaiser. If your Kaiser is unlocked, the sim card should allow text and voice without messing with any settings. There is also a .cab program called Carrier Settings Wizard (or some such) that is floating around in the Hermes threads. It might be able to set up the (non-flat-rate) data settings for Softbank.
If you are a heavy data user and want a flat-rate data plan then, after signing up for one, you would need to apply the treatment that we are discussing here. However, from what chaimd says it doesn't sound easy.
Unfortunately, contracts from Softbank are usually for two years - not ideal for someone who is always traveling back and forth. Depending on how long you are in Japan, it might be cheaper just to roam here until you make the move.
@chaimd,
You said you used Pof's tool. Is your Kaiser Super-CID? It seems strange that the CID must be known if the device is Super-CID.
Also, you said:
"5. To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file. "
What is this Self-Signing CAB file? Do you mean the patched WIFIwake?
Or perhaps ORE2Cert?
Will the ORE2Cert from the Hermes package work with the Kaiser?
Hi, larsuck! I'm writing on Kiser through the flat-rate Softbank connection, now.
First: Is my Kaiser Super-CID?
Yes, my Kaiser is Super-CID. First, I checked "info 2" command, after the installation of pof's Hard-SPL. As WIFIwake works on my unlocked Treo750, and I jumped and thought "Yes! Super-CID! WIFIwake will work without patches!", ..... but it does'nt generate the password in real. Indeed, it is strange. I was confused.
We tried many many patterns of patching WIFIwake, but WIFIwake did'nt generate the pass, and we spent a few days. Finally, one of us found the right way! and we've got to the flat-rate Softbank connection. We found pre-unlocked CID was known to work WIFIwake on Hard-SPL Kaiser. I don't know why?
2nd: What is self-siging cab file?
The itamae's WIFIwake has already been signed by him to work without a ROM cooking. ORE2Cert, ore-ore-certification means self-sign certification in Japanese, is his signature to allow execute a previllaged code for WindowsMobile devices. But, if you patch the WIFIwake, WindowsMobile rejects it as a illeagal modified code. Then, you must re-sign WIFIwake, and install yor own Self-Sign-Cert.cab with your WIFIwake. You need to make your own Self-Sign-Cert CAB file. ORE2Cert.cab from the Hermes package does'nt work on Kaiser.
I described how to make Self-Sign files without VisualStudio in my blog. It's almost the minimum procedure of self-siging, but it's in Japanese.
Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch
wohoooooo thanks so much for realizing my request. i will try it soon
EDIT:
i was trying to send an SMS while my phone was connected to my computer using the USB cable. it didnt work!!! but now i disconnected the cable and sent the SMS via GPRS/3G. the sms arrived!!!! and it works
HOWEVER;
after SENDING the SMS i also get the error message that the message was not sent or something.
hope you can fix that problem soon, as it is important to know whether the SMS arrives or not..
thanks a lot for your effort!!!!!!!!!!!!!!
Actually if there is only a simple error, it has always been sent on my device. If there is really a problem, you will get an exact error message (no balance, number false....)
I dont know why this is, I get that "Error" back from the VOIP Server so I cant fix it I'm afraid.
But yeah... I have never gotten this error and it was not sent... so you can test it a bit and if has always been sent while this simple error appears, I will deactivate it...
For USB: It's working here... Does your internet connection work while beeing connect on usb?
yes internet available while on USB. but it doesnt matter really.. at least it works though 3G etc.
you might want to disable the error message... its very annoying and loads for ages before it comes.
the GSM VOIPBUSTER Client shows THE SAME error... thats remarkable. implies the error is from the voipbuster server.
Ok I will disable it
awesome, thanks!
hey wat kind of connection does it use to send the sms, dont have a data plan so will simple wifi connection due? dont want to get a bill of charges afterwards . thanks again we all needed something like this. should port this to the smartphone general forum as it'll help everyone . good job
i'm getting an unexpected error when i enter settings, happening to anyone else?
makaveli86, do you have the Wings?
When do you get the error, by clicking on "save"?
It takes the same connection as the Internet Explorer would do.
So if connected to WLAN it should take WLAN...
If the device you've sent the SMS to is not "on", so could not directly get the SMS (but will later if it is turned on), the VOIPBuster server is also giving back the "Error"
SO I will just deactivate that... If there is really an error, it will show the correct error
oh you created it specifically for the wings? thought it was a smartphone app in general, i have the vox was hoping it would work on any smartphone...is there anyway you could find a way to do that because i know a lot of people who were looking forward to this.
Of course... it should also run on all other devices.
But I had no time yet to test it on other devices, mainly on pocketpc I will have to test some more
ohh ok..well i'm having troubles getting into the settings menu (currently running it on a s710 htc vox) so maybe if someone else that has the vox as well can confirm this for me? or if you dumdium get the chance to run some tests and see wahts up? i'll be glad to help if you need it
anything???
i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd
A.Bagatov said:
i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd
Click to expand...
Click to collapse
ya just retried it, still same thign. did a few reboots nothing.
bagatov, you using the s730? how responsive do you find that phone? are you satisfied of its performance?
hey
i use s730 and i love it. but the ram could be bigger. sometimes when i read RSS news with spb insight, listen to music with TCPMP and surf the web with OPERA stuff gets closed due to lack of ram. thats very stupid. but im sure an update will fix it. it also could be faster, but i hope htc will release the drivers to unleash the full potential of the 400 mhz
Dumdidum said:
Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch
Click to expand...
Click to collapse
did you post the new version of this app where the error message is removed?
thanks
i'm guessing hte program is done with?
Hello
I've just bought an xda stellar (Same as the Kaiser but purchased from the o2 network in the UK) and for some reason the Message delivery notification tick box is missing form the message options. Is there a way to get this tick box back as I assume the operater has removed it for some reason?
If anyone can help it would be greatly appreciated as I've spent about 3 hour searching on the internet for a solution and this website seems to be about the only place that I've found that I think might have a solution.
Thanks
David
use KaiserTweak
http://forum.xda-developers.com/showthread.php?t=333898
Are you sure it isnt simply in "message options" on the sms menu like with all these WM6 roms?
Its not in the message options, I had a previous version of this phone and it had two tick boxes in the message options.
Message delivery notification
& Use unicode when necessary
On my kaiser there is only:
Use unicode when necessary
ZiYi I've just tried that Kaiser tweek program and it doesn't have and option for message delivery notification only turning on/off the message sent feature.
Can anyone please help?
Thanks
David
Ok, I think I misunderstood your statement. Sorry.
You are talking about the message delivery notification from the operator right?
ok, I have the setting in "message option". Create new message->menu->message option.
Thanks for your quick response.
Yep, I'm talking about the message delivery notification option.
In my old windows mobile the tick box was where you said it is in the message options however on this phone its not there.
I think the operater (o2 in the UK) have put there own version of windows mobile 6 on the phone and for some reason doesn't have this feature on.
The option is still there in the registry so if I change the value from 0 to 1 on the SMSDeliveryNotify registry field it should work, which it does for about a couple of hours and then something on the phone resets it to 0 again without telling me (I.e. turning it off). It's really starting to annoy me as I find this feature incredibly handy becuase I deal with people who fly alot and if I send them a text I then know they've landed when I get the notification and can call them.
If anyone can help me with this problem I'd be very appreciative as apart from this it's a great phone.
Cheers
David
Missing "Delivery Notification" option in SMS "Message Options" - any advice anyone?
Hi David, and all here!
I've a new o2 XDA Orbit II (I think it's a HTC Polaris) and I've the same problem!
I've spent hours googling here and beyond to find an answer but to no avail. It's really taken the good out of my new acquisition!
Did you manage to resolve the problem, David, or get any clarity on why that option is no longer there?
If anyone else can help with info, a tweak, a workaround or good software that does this job I'd be very grateful if you could let me know!
Sincerest thanks,
Conor
my Hermes has a "communication button"....but diamond doesn't even have that..
i know the title is misleading..but what i wanted to know is...is there an app that pop up to turn on wifi....when i'm trying to do the following:
>Update weather
>start opera/skyfire/IE
>start any application that requires internet connection
PPC users like me that can't afford any data plan...is there a way to do this pop up...that'll be a crazy app..IMO
solidkundi said:
my Hermes has a "communication button"....but diamond doesn't even have that..
i know the title is misleading..but what i wanted to know is...is there an app that pop up to turn on wifi....when i'm trying to do the following:
>Update weather
>start opera/skyfire/IE
>start any application that requires internet connection
PPC users like me that can't afford any data plan...is there a way to do this pop up...that'll be a crazy app..IMO
Click to expand...
Click to collapse
+1. Just a question box saying "Do you want to run on wifi? Yes No" . Kinda annoying to have to go into commanager everytime I need Wifi.
1 vote from me too! Very smart and useful.
Not a popup but toggle, just save to start menu, then you don't have to go into comm manager everytime to enable wifi http://forum.xda-developers.com/showthread.php?t=419005
I use AEbutton, and configure it to toggle wifi with a triple click on hang up button ^^
kien said:
Not a popup but toggle, just save to start menu, then you don't have to go into comm manager everytime to enable wifi http://forum.xda-developers.com/showthread.php?t=419005
Click to expand...
Click to collapse
I can second this. Works like a charm.
thanx for the reply guys....im interested in the ,AE thing..
i also had another question is it possible to completlt get rid of data network... because I'm very bothered by it.....
like when i run certain programs it tries to check for update...and its very annoyin with the pop ups and if someone calls u will miss it sometimes.....
i hope u guys understand how frustrating it is
thanks
solidkundi said:
thanx for the reply guys....im interested in the ,AE thing..
i also had another question is it possible to completlt get rid of data network... because I'm very bothered by it.....
like when i run certain programs it tries to check for update...and its very annoyin with the pop ups and if someone calls u will miss it sometimes.....
i hope u guys understand how frustrating it is
thanks
Click to expand...
Click to collapse
Yeah, had the same problem too. Use DiamondTweak, scroll trough the various options there and you'll find what to disable. I think it's item 6.3 or something.