Database Develop

MMS Configuration, or other MMS issues

Short question, maybe someone knows. If I want to add a new Server in MMS Configuration the [New] button is not responding.
How can I re-activate this button.

anyone, help would be appreciated.

Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...

_Nomad_ said:
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
Click to expand...
Click to collapse
Yes I guessed that one, therefore I was hoping to get some "other" advises before I hard-reset and notice the same.

I would search for a cab named "Set_up_MMS_folder" in before going back that far. You already have a folder, but reinstall could help fix whatever you are missing.
Good luck.

I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?

_Nomad_ said:
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
Click to expand...
Click to collapse
No it didn't work, I was re-installing my phone. I installed my normal things, as always, like spb today etc. This time I flashed the std T-mob ROM because I was a little tired of all the small problems I had with the home-cooked and now this...........

The mms folder and everything I have, it's only the stupid button which doesn't work.....
........It's there, but even he color shows it's not active.

Im seriously starting to believe the so called gurus in here arent exactly up to snuff ....so to speak. your problem is simple... you have to browse to regedit..somehow(!! can you figure that out?)
oh, just got it:Total commander, tap the two dots in far right (..)
tap the root (\\)
tap registry/hklm/software/arcsoft/...MMSUA/CONFIG/UI/
DRUMROLLLLLLLLLLLLLLLLLLLLLL... now YOU figure out which setting to enable!
nah, it should be EnableServerEdit ...i think, change the value to '1'
voila
THIS DOES NOT MEAN MY MMS IS WORKING...... I HAVE A PERSISTENT PROBLEM BEING UNABLE TO SEND MMS & everyone is CLUELESS!!
aaaaarghhhhhhhhhhhhhhhhh I WANT TO DIE!!!!!!!!! lol

ifull, thanks for the advise, this did the trick. Thanks again, I'm not into registry editing.
I think my problem, as you said, was so simple that the experts thought I would figure this out by myself, LOL.
Thanks again, if I can help you in someway, please PM.

What are the right mms settings
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..

settings
here are the settings that should be there according to tmo website - http://support.t-mobile.com/knowbase/root/public/tm21387.htm
on mine those are right but what I think the problem is this, when mms is sending it keeps getting interupted by gprs trying to connect. is there a reg hack to let mms send without being disconnected????

I believe in regedit there are some errorlog.txt files that show you the WHOLE transcription of your attempted outbound messages. If I find mine, I will post it as it shows where the delivery went wrong.
so are you trying to say your 'mms fix' of a day or so ago is not quite "fixed" or what?

re:
this whole mms thing is starting to make me feel like its a tmo network issue and not the device, just never know...but I did flash my rom to X's 2.26 w/ 2.47 radio

mms fix i think
once u hak the reg and change the setting as listed earlier to allow settings edit... click on tmobile mms settings and it should show the settings that were downloaded from tmo...but u want to change the option that says connect via mms --) to connect via data..
I just did that and it sent right away...
it works, click on the tmobile mms server and then change the connection to via data instead of mms... I just sent a message to my self and it sent it out my outbox in less than 30sec for a 75k file

robpet2 said:
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
Click to expand...
Click to collapse
I think the settings are operator dependend

hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks

ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
Click to expand...
Click to collapse
Yes thanks again, I had to do some regedit fixes, like I deleted the whole tree below what you mentioned. Now I'm able even to set as default.
I renamed the thread, because I know a lot of people have problems with MMS.

error log
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
Click to expand...
Click to collapse
yep I got error log msgs but it still send the pics

Thanks!!
More proof how valuable the information shared here can be.

Kaiser on Softbank in Japan?

Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,

Theoretically it is possible as the radios and sim cards should be compatible.
However, the Softbank AP for the flat rate data plan has not been cracked. Yet. There are a few people with Treo 750s that are also interested in seeing this password revealed - as well as me. I would like to try the Libra - or perhaps even the Omni or Wings (when and if they debut) if they have the right radios.
If you don't mind paying more for data, then the expensive/slow data connection to Softbank is possible.

RayB said:
Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,
Click to expand...
Click to collapse
Here's the interesting thing. Ordered a Kaiser from UK via DHL (delivered in 3 days!) and today when I stuck in my Softbank SIM, I found that the Kaiser (TytnII) software automatically detected that I was on Softbank and automatically installed the connection settings for Softbank. I am able to surf using that auto configured connection though I cannot confirm this is the connection that uses the flat rate 3G thing. More investigation needed.
There's been tonnes of posts on how people can setup a link using software/hacks/whatever to access the flat rate software package but haven't had enough time to check it out.
At the moment, except a direct HSDPA (as indicated by the icon) internet link, there's no MMS or SMS (!) so I need to figure out why; latter might be because MMS and SMS seems to share the same mailbox now so maybe because I've not setup mms as yet, even SMS won't come in
Boy, why has everything in Japan got to be so complicated...

Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.

Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich

ofiaich said:
Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich
Click to expand...
Click to collapse
Ofiaich - no, no, don't worry about the off-topic post.
And you don't ever need to be scared of modding your phone as long as you have a backup utility. I recommend SPB Backup, but some are fond of Sprite.
The Kaiser is a relatively new device so you are kind of flying blind. However, since both machines run WM6, many of the same packages should be viable. Let's start with the directions found in Make your X01HT a WM6 Device (for Gaijins)
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
I believe that these files are generic for WM5/6, and that they should work on any QVGA machine. The picture from Asukal's page shows them working on an Alpine, so they are not specific to Hermes.
The following directions however, might be specific to the Hermes, as they are registry settings for the keyboard. The above packages should actually automatically change the two HKCU registry entries below.
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/show...keyboard+x01HT
Click to expand...
Click to collapse
I am really interested in helping you (i.e. using you as a guinea pig) as I am also interested in importing different devices for use in Japan and need Japanese support.

thanks very much larsuck !
I sent you a PM !
I have found some of those pages before! I am an absolute beginner for Windows Mobile so some procedures are a bit daunting !
I hope to get a TyTn II very soon ! Saving up and trading old phones etc!
I will read your links again thoroughly and come back to you!
Ofiaich

I purchased Kaiser.
There was environment I displayed Japanese, and to be able to beat against Japanese with Atok.
I tested SB in Kaiser with usable ConnSBM_ORE2h.zip, but Password was not formed.
I think that Password is made if I do not understand that I make ORE2cert.cab for Kaiser, and it is possible for this.

Maro,
So, let me just make sure I understand: you have a Kaiser, and that the Kaiser can read Japanese, and that you can input Japanese using third-party software called ATOK.
That is good news for our friend ofiaich.
Now, I understand you tried to install Softbank's flat rate connection set up using ConnSBM.cab, ORE2cert.cab, Out.xml, and WIFIwake.exe, all four of these files being the ones used for the Hermes. (There is also a package for Universal called ConnSBM_ORE2u.zip.)
And you say that you can make a ORE2cert.cab for Kaiser and if you do that then the password will be made?
If that is so, then that is great! But I have a feeling that you don't need a new ORE2cert.cab. The ORE2cert.cab for the Hermes and the ORE2cert.cab for the Universal seem to be the exact same file.

larsuck said:
Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.
Click to expand...
Click to collapse
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Installed MMSlite and ended up having constant irritating reports that storage memory is full! No way MMSlite can occupy so much memory! Anyway, ended up having to hard reset. Once reset, this time I installed CE Star to provide japanese font support and then installed MMSlite. Worked a treat. Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something. Next is to find how to get access to the flat rate connection so time to dig the archives...
Any other fellow Japanese Kaiser users who can share some experiences?
Thanks Larsuck for the comments and tips....

dajtw said:
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Click to expand...
Click to collapse
Well, that's a bummer, but as Softcrank keeps their flat-rate settings top top secret, it was also to be expected.
Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something.
Click to expand...
Click to collapse
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Next is to find how to get access to the flat rate connection so time to dig the archives...
Click to expand...
Click to collapse
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.

larsuck said:
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.
Click to expand...
Click to collapse
Thanks for the info relating to MMSlite; think I have build 275 so could give it a shot I guess.
My Kaiser did indeed have the joined SMS/MMS box prior to installing MMSlite; post-installation they're still joined. What type of trouble did you have just out of curiosity? I've yet to have any issues.
Bummer, thought there existed some means of generating the password etc etc using some really convoluted means of installation in xda forums? So I take it there currently exists no means of accessing the Softbank flat rate connection outside of using the original Japanese mobile? I thought there was a post that would auto-populate the password field after the convoluted setup?

Yes, there is a convoluted process like that. Unfortunately, it depends on an .exe file called WIFIwake.exe that is device specific. There is an .exe for the Hermes and one for the Universal - none for the Kiaser yet. If you would like to try either of those links, they are
here
If you have the knowhow to delve into an .exe file and make the right changes (I have compared the files and there are only two changes to make it seems), I know you will make more than a few people happy. Needless to say, I don't have any idea how to even start editing programs.
I have been searching, trying to find a work around for a couple of months now. At first, I had been looking for the password itself, but I don't know that it is such a good idea for the password to get out. That's what happened before, and in response Softbank closed down that access point and switched to the current one.
So, now I'm looking for a solution in the form of a .cab or registry hack - one that can be used on a wider range of machines. If and when I succeed, I will post to this form and you can give it a shot.
I tried two ROMs with the SMS/MMS joined mailbox. The first one was Black Satin, and on that ROM the SMS wouldn't send or recieve. I didn't even keep that ROM long enough to check MMSlite. The second ROM was T-Lite by edhass. That ROM had no problems sending and recieving SMS, but when I installed MMSlite it created a separate mailbox called MMS1. So, everytime I would go to send a MMS, it would automatically try to send it using the joined SMS/MMS settings and it wouldn't go through. So, it wasn't that it didn't work, it was just kind of a pain in the ass.

Hi!
ordered the TyTn II and, with luck, it should be with me tomorrow!
At the latest Monday before 1.00pm!
I am an absolute beginner with Windows Mobile, and yes, I will RTFM thoroughly and also search and search.....
But if anyone can help with like an Idiots Guide to Installing Japanese, I would be grateful!
larsuck, I have downloaded the files that you told me about, from the post on the 19th!
Good weekend for all!
Ofiaich

Patched WIFIwake from Chaimd
Huzzah! Huzzah!
Chaimd has apparently patched WIFIwake to work for Kaiser!
With this, Kaiser users should now be able to get the flat-rate Softbank connection working.
First, here is the thread where Chaimd first posted this info and the patched WIFIwake: http://forum.xda-developers.com/showthread.php?t=298031&page=11
Read it first, because there is something about CID-unlocking the Kaiser and memorizing the Pre-unlocked CID. I will alert Chaimd to this thread and hopefully he can answer questions.

Thank you, larsuck. I'll try to explain the working WIFIwake.exe on Kaiser, in my terribly poor English.
Now, we can connect to the flat-rate Softbank access point, to patch and sign WIFIwake.exe.
That WIFIwake works copmpletely on my Kaiser. But that method depends on;
Pre-Unlock CID must be known!
CID unlocked, I used Pof's Hard-SPL.
Patching WIFIWake.exe;
01C760h "KAIS1300KAIS1300", 16 chars in UTF-16.
01C784h Pre-Unlock CID, 8 chars in UTF-16.
01C798h Pre-Unlock CID, 8 chars in UTF-16.
Self-Signing WIFIwake.exe
To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file.
If you understand Japanese, you can get some informations of Kaiser & WIFIwake in this blog;
http://d.hatena.ne.jp/chai99/20071008

Now if you don't mind me asking, how do you use a non-japanese sim based phone on softbank with a data contract (not technically) but actually like go about it? As i go back and forth between japan frequently and in ~6 months will be moving there again for a year or two. Last time i lived there, I never had a mobile. Times change and now i need one for sure while there. I'd love to use a Kaiser that I have on hold at AT&T (can get it completely unlocked...). I thought they don't give SIM cards on there pre-paid phones...

@Philz,
If you get a cheap phone from softbank with a voice plan, you can use the sim card from that in your Kaiser. If your Kaiser is unlocked, the sim card should allow text and voice without messing with any settings. There is also a .cab program called Carrier Settings Wizard (or some such) that is floating around in the Hermes threads. It might be able to set up the (non-flat-rate) data settings for Softbank.
If you are a heavy data user and want a flat-rate data plan then, after signing up for one, you would need to apply the treatment that we are discussing here. However, from what chaimd says it doesn't sound easy.
Unfortunately, contracts from Softbank are usually for two years - not ideal for someone who is always traveling back and forth. Depending on how long you are in Japan, it might be cheaper just to roam here until you make the move.

@chaimd,
You said you used Pof's tool. Is your Kaiser Super-CID? It seems strange that the CID must be known if the device is Super-CID.
Also, you said:
"5. To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file. "
What is this Self-Signing CAB file? Do you mean the patched WIFIwake?
Or perhaps ORE2Cert?
Will the ORE2Cert from the Hermes package work with the Kaiser?

Hi, larsuck! I'm writing on Kiser through the flat-rate Softbank connection, now.
First: Is my Kaiser Super-CID?
Yes, my Kaiser is Super-CID. First, I checked "info 2" command, after the installation of pof's Hard-SPL. As WIFIwake works on my unlocked Treo750, and I jumped and thought "Yes! Super-CID! WIFIwake will work without patches!", ..... but it does'nt generate the password in real. Indeed, it is strange. I was confused.
We tried many many patterns of patching WIFIwake, but WIFIwake did'nt generate the pass, and we spent a few days. Finally, one of us found the right way! and we've got to the flat-rate Softbank connection. We found pre-unlocked CID was known to work WIFIwake on Hard-SPL Kaiser. I don't know why?
2nd: What is self-siging cab file?
The itamae's WIFIwake has already been signed by him to work without a ROM cooking. ORE2Cert, ore-ore-certification means self-sign certification in Japanese, is his signature to allow execute a previllaged code for WindowsMobile devices. But, if you patch the WIFIwake, WindowsMobile rejects it as a illeagal modified code. Then, you must re-sign WIFIwake, and install yor own Self-Sign-Cert.cab with your WIFIwake. You need to make your own Self-Sign-Cert CAB file. ORE2Cert.cab from the Hermes package does'nt work on Kaiser.
I described how to make Self-Sign files without VisualStudio in my blog. It's almost the minimum procedure of self-siging, but it's in Japanese.

AIM for WinMo

I'm looking for a lightwieght AIM client for WinMo. I have tried installing Agile Mobile but it wouldn't install. I would use the one that came in the ROM by default by ATT but it lowers your txt msgs with every IM you send. I'm looking for a free solution. When I had my iPhone I was able to use Mobile Meebo and/or iphone.beejive.com but none of these work on the kasier.
Which one do you all use? Much thanks.

Here you go, this one is my favorite. It was updated in 2000 but it's honestly the best AIM app I've found.
AIM Download

I use Slick.

dylanc430 said:
I'm looking for a lightwieght AIM client for WinMo. I have tried installing Agile Mobile but it wouldn't install. I would use the one that came in the ROM by default by ATT but it lowers your txt msgs with every IM you send. I'm looking for a free solution. When I had my iPhone I was able to use Mobile Meebo and/or iphone.beejive.com but none of these work on the kasier.
Which one do you all use? Much thanks.
Click to expand...
Click to collapse
i agree with the poster above me, use slick, it updates on occasion and is fairly simple to use.
Here i've attached the file. you need to update once you install it so don't be discouraged.

Seeing as you used Jive Talk in the past, you should try the WM6 alpha.
http://www.beejive.com/wm6/

outphase said:
Seeing as you used Jive Talk in the past, you should try the WM6 alpha.
http://www.beejive.com/wm6/
Click to expand...
Click to collapse
Hrmm..I just installed this app. And the overall look of it seems nicer than slick. Thanks ouphase.

I assume that both Slick and the new Beejive use my phone's data plan so I won't be charged a text message for every IM sent, correct?

dylanc430 said:
I assume that both Slick and the new Beejive use my phone's data plan so I won't be charged a text message for every IM sent, correct?
Click to expand...
Click to collapse
Correct (completing 10 char limit)

fb401 said:
Correct (completing 10 char limit)
Click to expand...
Click to collapse
what if i dont have a data plan?
be/c i got no data plan at all. i just use wifi.

Palringo works nicely and on multiple networks. I use it for AIM, MSN, and Yahoo.

i've been using palringo as well...i like that it integrates google chat at well, and the FINALLY updated it about a month ago where you can continue to have multiple chats open rather than closing a chat w/ 1 person, to open up a chat w/ another.
but i'm always looking for something newer and better...

i'm really diggin the layout and the chat history function of slick...but i tried to get jivetalk up and running, the cab that i'm downloading from their website isn't opening up on my phone properly...anybody having problems w/ the program as well?

I've had Palringo for a while now and just installed BeeJive. Palringo uses less memory, connect faster, plain and simple. Plus if you have MSN or HOTMAIL contacts on your yahoo buddy list they show up in Palringo unlike BeeJive. Beejive is more appealing with alot of neat and promising features butof course uses more memory. I like BeeJive more because it's got a feel to it plus it has alot of option to mees around with.
I'm sticking with both of them for now, and will run either one depending on my mood

anyone having problems installing jive talk too? i just did a hardreset on my phone and it still isn't working out. i'm sure it doesn't make a difference but i'm running qmobile 1.2 and its keeps pulling this error after i try to run it after a "successful" installation to the device. "
System.TypeLoad Exception
Unexpected Error:
Type LoadException at
Beejive.Jivetalk.view.buddylistcontroller.buildmenu()at....
Click to expand...
Click to collapse
and continues on and on with a message caption that takes up the entire window. any ideas?

i have a couple mac fag buddies, they use iphone, and ichat for pc, any of these apps work w/ ichat? From what i hear you only need aim not sure if thats true (plus id love to NOT use aohell for anything)

iChat either uses .Mac or AIM to chat. Find out if they use AIM.

simbadogg said:
anyone having problems installing jive talk too? i just did a hardreset on my phone and it still isn't working out. i'm sure it doesn't make a difference but i'm running qmobile 1.2 and its keeps pulling this error after i try to run it after a "successful" installation to the device. "
and continues on and on with a message caption that takes up the entire window. any ideas?
Click to expand...
Click to collapse
I get this same error on my 8125 running the latest (213) TNT ROM.

URL Links
Does either Slick or Plaringo convert http links in messages to clickable URLs?

palringo does, slick does as well...the real stinky thing about slick is you can't just copy text from conversations...which i do a lot. Sometimes i like to just copy convos etc, palringo is nice because whenever someone sends you a link, whether it be a picture of a youtube, or website or w/e...it'll say "open in browser" or "copy to clipboard". slick you can kind of do the same thing, but it takes a hell of a lot longer

simbadogg said:
anyone having problems installing jive talk too? i just did a hardreset on my phone and it still isn't working out. i'm sure it doesn't make a difference but i'm running qmobile 1.2 and its keeps pulling this error after i try to run it after a "successful" installation to the device. "
System.TypeLoad Exception
Unexpected Error:
Type LoadException at
Beejive.Jivetalk.view.buddylistcontroller.buildmen u()at....
Click to expand...
Click to collapse
and continues on and on with a message caption that takes up the entire window. any ideas?
Click to expand...
Click to collapse
I get the same message....
I have seen this question asked multiple times in numerous threads with no answers...rather than start a new thread, i figured if bring this thread back and hopefully someone could answer this question? thanks

HELP PLEASE!!!!! need to block or silence Restricted/private calls

PLEASE HELP me to block private/restricted calls on my HTC FUZE. I have a person calling me with private and or restricted number all night long...at least 40-50 times through out the night. on my HTC tilt I could set a no ring tone sound for the unknown calls....in the HTC fuze I don't see such option. I installed call firewall on it today and now its blocking ALL my calls
sorry If this is already answered but could not find a solution when searching the site...
any help would be much appricieated.....
Thanks

Which version of Call Firewall are you using? Is it v1.4?
If so there should be an option to "Reject Unknown / Private Calls". This should work for you, but no gaurantees.

I have the 1.4 version but it blocks all my calls
I have the 1.4 version but it blocks all my calls ...when i tried setting it to unknown / blocked calls it still blocks all my calls! =(
I called att&t and they won't do a thing...

Put a blank sound file on your phone. Put the person in your contacts, set the rington as the blank sound file.

YellowGTO said:
Put a blank sound file on your phone. Put the person in your contacts, set the rington as the blank sound file.
Click to expand...
Click to collapse
It is unknown. You can't put that into your phonebook.

<I fail at reading.

I am using CallFirewall 1.4 and it works great on my Rapahel. All unknown calls got rejected. Maybe you should jsut reinstall Callfirewall program.

Have you tried SPB Phone Suite? I am using it although I don't use the Call filter function.
But I checked what it offers and you can add Private Callers to blacklist.
There should be trial version of SPB PS on their website... Maybe you can try it if you don't mind to pay a few bucks eventually.

Try MagiCall
I use magiCall by mobiion here is the link: http://www.mobiion.com/magicall.html I have used it for at least 4 years and it works wonders. While it's isn't free the developers supports it fully provides free updates for minor releases. It has a lot of options as well and there is a 15 day free trial.

You could use YouMail to do this. It's a voice mail service for your phone that allows you to block particular callers as well.
http://www.youmail.com
Jim

I am using the call firewall 1.4. However I still get 1 ring before it rejects them. It also tends to block any number that is NOT private/restricted. For example I make a call from my home (unblocked) to the mobile phone...it starts ringing but won't let me answer the call =(
What settings are you guys using on the call firewall? may be I am doing something wrong...
I have the reject unknown/private calls checked.....

MagiCall RULES!
I just installed the free trial of MagiCall and it works like a champ :=) I don't get my normal calls rejected and it actually rejects the blocked numbers with out a single ring....
I WISH IT WAS FREE! any one has a copy to spare

call firewall automatically shutdow in touch pro
i am using call firewall 1.4 on my touch pro and after i minimize it, i suppose it hide and keep running behind.
i leave the "Do not show in 'Running Program'" uncheck, so i am suppose to see it's running in the task manager all the times, right?
but it seems that call firewall sometime will automatically shutdown and disappear from the tasks manager. sometime is after i turn on the media player, sometime is after i turn on the youtube link.
the worse things is, this shutdown does not occur consistencely.
does anyone of the experienced user can tell me do they get similar issue on their touch pro/fluz with call firewall?
i did contact with HTC but they cannot help me because i cannot explicitely tell them how and when the software will shut down.
i want to see may be it is due to i am just not too familiar with the machine. or there are someother treak that is i don't know.
this also happen with both SPB GPRS Monitor and the SPB wireless Monitor.
those are also program i need to run at the background consistenly.

yellowducati996 said:
I just installed the free trial of MagiCall and it works like a champ :=) I don't get my normal calls rejected and it actually rejects the blocked numbers with out a single ring....
I WISH IT WAS FREE! any one has a copy to spare
Click to expand...
Click to collapse
I found that Mobiion is co-operating with TrialPay. If you don't know much about TrialPay, you may search it on the internet.
You are able to get MagiCall for free by doing a TrialPay purchase. Just open the product page http://www.mobiion.com/magicall.html, and then close the page, a window will pop up displaying a purchase button to make TrialPay purchase and get MagiCall for free.
Hope it can help you.

+1 for youmail.com

yellowducati996 said:
I just installed the free trial of MagiCall and it works like a champ :=) I don't get my normal calls rejected and it actually rejects the blocked numbers with out a single ring....
I WISH IT WAS FREE! any one has a copy to spare
Click to expand...
Click to collapse
No free copies, it is tied to the owner of the phone name email.Just buy it, its cheap compared to the phone

chanty said:
I found that Mobiion is co-operating with TrialPay. If you don't know much about TrialPay, you may search it on the internet.
You are able to get MagiCall for free by doing a TrialPay purchase. Just open the product page http://www.mobiion.com/magicall.html, and then close the page, a window will pop up displaying a purchase button to make TrialPay purchase and get MagiCall for free.
Hope it can help you.
Click to expand...
Click to collapse
Thanks for the info. Just did this. Worked like a charm. I signed up for a free trial of emusic.com and now Mobiion will be sending me a registration key within 24 hour. Instead of $24 this ended up costing nothing. All I have to do is log into my emusic account and cancel the trial tomorrow without being charged anything.

YellowGTO said:
<I fail at reading.
Click to expand...
Click to collapse
nom nom nom..
this was actually pretty funny..
and in refrence to the topic at hand..cant help..sorry!
Late,
Jstar

i signed up for youmail, but it only let me access the voicemail...how do i get tto the blocked calls and speech to text part

Which Anti theft programme?

Can you guys recommend a theft alert style prog for the X1.
So far i have heard of
Ultimate Theft Alert v3
MASPware GuardMobile
Where Is My Phone
Smart Protect
What's the best, what are the things to look for?
Thanks

thanks for posting..i was also looking for a programme..the phone costs as much as my laptop..and if i lose it i am gonna regret it.
samsung phones have inbuilt softwares..not sure of SE though.
there was a free anti-theft programme also.

SmartProtect is also an option

Smartphonetracker is free and works exactly like WIMP (Where Is My Phone).
Smartphonetracker

emwdava said:
Smartphonetracker is free and works exactly like WIMP (Where Is My Phone).
Smartphonetracker
Click to expand...
Click to collapse
Hm, I read the program documentation but there is a thing that makes the program absolutely useless:
Send SMS with a predefine code to the lost/stolen phone or your family member that have SmartphoneTracker installed.
Click to expand...
Click to collapse
If someone steals my phone, the first thing he would do is to switch it off and exchange the sim card. So how should I send a SMS to the phone to wake up the program when my SIM-card with my phone number isn't in the phone anymore?
Such a Anti-Theft-Program need to send the location to a predefined Mail-Account when the SIM-Card has been changed. The program has to recognize that the SIM isn't the same and then start itself on Windows startup as soon as possible so that it cannot be closed before it can send the mail.
Anything else makes such a program useless in my opinion.

skycamefalling said:
If someone steals my phone, the first thing he would do is to switch it off and exchange the sim card. So how should I send a SMS to the phone to wake up the program when my SIM-card with my phone number isn't in the phone anymore?
Click to expand...
Click to collapse
Well not maybe. When my last phone lost and I call to my sim operator to close my sim, so no one cant call or sms or nothing.
BUT they didnt some reson!!! An yeah I get some 500€ bill,
when some jerk ordere f*cking lots of soda in sodamachine and etc ****!!!
Well thanks god my operator repayment it.

i installed Smartphonetracker.
it works..but gotta test it from a remote location now...hmm ..i ll try sending sms from a friends phone maybe

I use wimp

skycamefalling said:
Hm, I read the program documentation but there is a thing that makes the program absolutely useless:
If someone steals my phone, the first thing he would do is to switch it off and exchange the sim card. So how should I send a SMS to the phone to wake up the program when my SIM-card with my phone number isn't in the phone anymore?
Such a Anti-Theft-Program need to send the location to a predefined Mail-Account when the SIM-Card has been changed. The program has to recognize that the SIM isn't the same and then start itself on Windows startup as soon as possible so that it cannot be closed before it can send the mail.
Anything else makes such a program useless in my opinion.
Click to expand...
Click to collapse
Notify on sim change... It's in the settings.
This means your phone with the new simcard will send a sms or email to a predefined number (not your own number but maybe your brothers phone or someone else you can trust) as soon as it detects a new sim inserted. voila and you have the thiefs phonenumber.
I have tested the feature and it works very well...
Maybe you didn't read about all the features?

emwdava said:
Maybe you didn't read about all the features?
Click to expand...
Click to collapse
I guess, this could be the case
So I stand corrected, thank you very much for this information. I think I should give the program a try then

skycamefalling said:
I guess, this could be the case
So I stand corrected, thank you very much for this information. I think I should give the program a try then
Click to expand...
Click to collapse
You do that. I think you'll like it.

I'm using MASPware GuardMobile, works fine and a lot of options. Smart proctect seems very good to me too, and it's free. Maybe I'll give it a try after a hard reset

i am searching a antitheft program, that is invisible implemented/implementable
into the ROM (completely configured).
for hardreset resistance. a spezial version of hardspl could be a good way.
so the theft protection is resistand for firmwareupdates by the theft.
hardspl once installed, could give out a unique secret key.
without this key no hardspl remove/update is possible. and the protection is not easy removable.hardspl handles all flash requests and without key....
only with commands to read/write directly to FLASH, the last chance to remove it.
and thats not easy for NOOB´s

what are your settings for Smartphone Tracker? i installed it an replaced the simcard but until now i havent received an email oder sms. it doesnt seem to work on the xperia? anyone has ideas?

http://www.freewarepocketpc.net/ppc-tag-security.html
would anything from here help??

tarnaman said:
what are your settings for Smartphone Tracker? i installed it an replaced the simcard but until now i havent received an email oder sms. it doesnt seem to work on the xperia? anyone has ideas?
Click to expand...
Click to collapse
1. you must have a working email account installed into the xperia.
This account (marked with a red box) will be used for sending the stealth-mail to your destination account.
2. The destination account should not be installed on the phone as the thief would also get the stealth-mail.
3. Setup your options in the settings view (see attached pictures)
4. press Send now in the menu if you want to tryout your settings.
It's recommended to have satellite sync while testing this.
5. Save changes and exit the application.

I'm having some trouble with smartphone tracker on my X1. When I send an sms containing my passphrase the X1 phone displays the text as a new unread message. Also the phone doesn't send any mail to my configured receiver. And yes, I've chosen a working mail account, it works when pressing "send now..." from within smartphone tracker.
Also the incoming text message displays as a new unread message, it's not suppose to do that right?
I get the feeling that Smartphone tracker doesn't catch incoming text messages. What's your experiences?

DOMin8or said:
i am searching a antitheft program, that is invisible implemented/implementable
into the ROM (completely configured).
for hardreset resistance. a spezial version of hardspl could be a good way.
so the theft protection is resistand for firmwareupdates by the theft.
hardspl once installed, could give out a unique secret key.
without this key no hardspl remove/update is possible. and the protection is not easy removable.hardspl handles all flash requests and without key....
only with commands to read/write directly to FLASH, the last chance to remove it.
and thats not easy for NOOB´s
Click to expand...
Click to collapse
And what about the Micro-SD flash method?
I also will have an unflash-able, own developed rom with my own security build in. But i'm in the learning position .

WIMP (Where Is My Phone) works perfect for my . I can upload the cab and the keygen if you want.

kostis60 said:
WIMP (Where Is My Phone) works perfect for my . I can upload the cab and the keygen if you want.
Click to expand...
Click to collapse
Not the keygen, it is illegal...