Database Develop

Need tapres.dll from a Windows Mobile 2003 SE Device

Hi i have the problem that i cannot copy the tapres.dll of my MDA Compact to my PC for modify. This has the "pressed" Buttons inside i have found tapres.dll for WM 2003 but i need the one with landscape graphic inside (WM2003 SE).
Can somebody help me to show me a way to copy this file to pc ... when i modify the registry for example tapres2.dll i can't copy the tapres.dll too!
Thx for your help
Snappy

here u go 8)

hmm, think this is not the same one like the one on my device, there is not the image inside like the tapres.dll from a wm2003 device ... perhaps you can show me a way to copy the tapres.dll from my device to my pc i need it in german too.
Thx for your help
Snappy

Snappy said:
hmm, think this is not the same one like the one on my device, there is not the image inside like the tapres.dll from a wm2003 device ... perhaps you can show me a way to copy the tapres.dll from my device to my pc i need it in german too.
Thx for your help
Snappy
Click to expand...
Click to collapse
You cannot copy/move/rename the ROM dlls. What you can do is to go to the ftp.xda-developers.com site, and perform a dumprom from the ROM images available on the site. To download dumprom and FAQ, goto wiki-xda-developers.com site and search for dumprom.
Bear in mind that if you then copy the new tapres.dll into the /Windows folder of your device, it exists as a run-time copy that the device manager will use instead of the original one in your ROM.
However, the new DLL cannot survive a hard-reset, and you must copy it back to the /Windows folder after a hardreset.
Last time, I think some of the drivers for Compact/Mini/JAM are customised for the hardware only. I'm not sure about taperes.dll, but you can try porting and see if it works. Good luck!
Anyway, here the tapres DLLs from a GERMAN ROM.

Thx alot for your help, i have found the graphic in the tapres.96.dll but i have only heard about a way to change the graphic by change the registry to a other dll...

Ok here an information for anybody who wants to create own skins for dialer on MDA3 and MDA Compact with Key Pressed graphic.
- modify the normal graphics with any graphic program
- extract the .ico files from the tapres.96.dll for example with "PE Explorer"
(Icon_Entry: 1 is for Standard and 2 is for Landscape graphic (3 is sqre))
- modify the .ico for example with "axialis icon workshop"
- replace the icon files with "PE Explorer" and save the .dll to a new name like tapres.97.dll
- modify the Registry Key HKEY_CURRENT_USER\ControlPanel\Phone\IcoFil to your filename "tapres.97.dll (original its tapres.dll)
- softreset
Thats all ;-)
Hav fun Snappy

Anyone have idea how to make my qwertz keyboard work in WWE

After I flash the MDA Vario into K-Jam WWE rom, the keyboard qwertz cannot work good. i.e. press Z, then get Y. So anyone have idea can we make the registry edit like MDA Pro, so that the qwertz also work good in WWE Rom?

try this:
4. for the german keyboard on english ROM
4a. get a registry editor (like Resco)
4b. search the Change the key
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
4c. edit - Layout in decimal to 66567

I am looking for this too .. but that key doesnt exist.
I did find:
\\currentcontrolset\control\keyboardlayout
active > 00000409
is this a value tot change ?
anyone knows the german code ?

I am looking for this too .. but that key doesnt exist.
I did find:
\\currentcontrolset\control\keyboardlayout
active > 00000409
I changed it to the settings on the german version
407
no result ...

imdnme said:
I am looking for this too .. but that key doesnt exist.
I did find:
\\currentcontrolset\control\keyboardlayout
active > 00000409
I changed it to the settings on the german version
407
no result ...
Click to expand...
Click to collapse
Yes, I tried the same as you tried, still no use. I guess may be a *.dll or some files for German Keyboard layout is needed.

i think is it the file keybddr.dll in the windows dir, i can not try it
because i had no other version from the dll
regards, Peter

I have still an original German 9100 and see the file also the
compime.dll. They are different from the WWE ROM, but there is no way I can copy these files to try it.
Any idea ? :roll:

rename it on the ppc, then copy the other files ...
bye, Peter

as i remember ,
I can copy the file out after Super CID unlock

How can I find the keybddr.dll in my PPC? I cannot find it!

Finally find out, cannot delete or change or copy the keybddr.dll file, anyone knows how can we replace or change the file?

If you don't want to edit the registry manually try using Registry Wizard. It's available for download in the regular Wizard forum and has an option for keyboard layout.

eklisiarh said:
1. Install the registry editor like Total commander ( http://ghisler.fileburst.com/ce/tcmdpocketarm.exe ) or Resco Explorer ( http://www.resco.net/pocketpc/explorer/downloads.asp ) to your Pocket PC
2. Open the program on your device and go to [HKEY_CURRENT_USER\ControlPanel\Keybd].
3. Create New String Value (if you already dont have one with the name Locale)
4. Type in Value name: Locale
5. Type in Value Data: 0407 (as i have an german device. NOTE: You've to look in the "LCIDHex" column on this site: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx for fourther area codes)
6. Close the window by clicking on Ok
7. Exit the program
8. hold your powerbutton for a few seconds until you'll be asked if you really want to switch your device off, click on YES
IMPORTANT: DO NOT RESET DEVICE WITH STILUS BY PRESSING RESET BUTTON
9. Turn on your device and it should work.
Click to expand...
Click to collapse
I already try that and it doesn´t work
i have wm5

Mr. Clean 2.24a AKU2.3 Rom with Dutch language (how-to)

Today I had some talks with Risidoro and Asukal about changing languages on Roms without upgrading to a whole new Rom.
Risidoro introduced me to Asukal after a question from me about Rom Cooking.
After some talking with Asukal about his "UI Language Switch Program" for Universal he gave me some files that I tested a few times.
Right now I am running a fully stable Mr. Clean 2.24a AKU2.3 Rom with dutch language, so for all dutch folks, here you go...
UPDATE: Right now I am running the latest 2.26 T-Mobile Rom, without problems!
[EDIT FRIDAY, 28th JULI]:
FINAL INSTRUCTIONS (for now....)
Definitive instructions to change the English Mr. Clean 2.24a AKU2.3 Rom into the Dutch language
- Install the Mr. Clean Rom
- Install these 5 files, I installed everything to the Main Memory, I advice you all to do the same!
1) Wizard_AKU2_NLD_mui_Tool.cab
2) NLD_Notifications_WIZ.cab
3) NLD_Today_113.cab
4) DUT_SMS.cab
5) NLD_Registry_Changes.cab
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run through the (Dutch) Welcome Screen for screen alignment etc.
- Go to Settings -> Regional Settings (Instellingen -> Landinstellingen) and set it to Nederlands
- Delete the file \Windows\initobj.dat and rename \Windows\welcome.lnk to something like welcome.bak.lnk
- Delete the folder "\Program Files"
- Delete the folder "\Windows\Fonts"
- Delete the folder "\Windows\Favorites"
- Delete the folder "\Windows\Programs"
- Delete the folder "\Windows\Start Menu"
- Delete the folder "\Windows\Start Up"
- Delete the folder "\Windows\PDFfonts" (optional, but I did it to get 2MB extra free space because I don't use ClearVue PDF!)
- Remove all English folders in \My Documents (EXCEPT THE TEMPLATES FOLDER, in this folder the Camera Templates will be stored!)
So you can delete the Camera Templates from \My documents\Sjablonen
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run these 2 files (located in this thread, somewhere below on the 1st page)
1) MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB
2) NLD_MMS_FOLDER.CAB
- Done!
Regards,
Molski

Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?

Not good, i cannot remove or rename welcome.lnk.......
Any suggestions, tried total comander and the windows explorer...
edit: Solved the problem on my own: First with total commander tap'nhold --> properties and disable the read only checkbox.
then goto shortcut tab and edit this to something....
then it is possible te rename..
Yeah not beautiful... but it works so what the heck....

mccune said:
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Click to expand...
Click to collapse
It will work on AKU2.5 after some development from Asukal and some testing from me, offcourse when I got it working, you all will get it working

My litle contribution to this fantastic idea
For the Dutch T9 follow the next steps:
In the attachment are three files:
1 - dictprob.dat
2 - statdict.dat
3 - mssp2_nl.lex
Copy them to the \Windows dir and replace existing files.
Then make the following changes to the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Spell Check]
"Main_Dict"="\Windows\mssp2_nl.lex"
Restart your device and it should work like a charm
[edit]
The following location was not in my registry:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, and my device is decertified. When I change the properties or rename the file it looks like everything goes well. But when I refresh the file is still there.
[/edit]

Great contribution!!
The following location:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
has to be:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\Strings"
I'm almost ready with the CAB file that takes care of these registry changes, including the T9 stuff.

mccune said:
My litle contribution to this fantastic idea
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, en my device is decertified. When I change the properties or rename the file it looks like everything goes fine. But when I refresh the file is still there.
[/edit]
Click to expand...
Click to collapse
Uncheck the read-only for this file and then go to the properties and remove the entry, OR rename the file like I did to something as welcome.bak.lnk

Here it is, the CAB file with the registry changes, with the files for T9 including one extra file (autocorrect.txt) from a dutch Rom, for (I guess) spellchecking.
I installed the file on my device and got no problems, I don't wanna say it is 100% correct, but I really guess it is, so were heading for 5 final files for installing Dutch Language on EVERY Non dutch Rom
By the way...don't forget to delete the old English subfolders of My Documents guys
I love it to be Dutch

Looks great!
I don't mind that the welcome.lnk stays. It only lets you run the welcome screen once, in Dutch. After that it doesn't show up anymore.
I followed the instructions about the ReadOnly settings, but like I said it looks like it changes the name of the file. But after a refresh it's back again
Glad to be of some help concerning the Dutch spelling

I updated my NLD_Registry_Changes.CAB file.
Because the Camera has some problems, although I change the "Frames" string, every time you select a picture template the setting is resetted.
So the solution is to delete every English subfolder of My Documents EXCEPT for Templates (!!), but on the other hand, it's not a bad idea to have al the camera templates in a seperate directory

Where is the update cab file? is it the one posted above?

ny-hardcore said:
Where is the update cab file? is it the one posted above?
Click to expand...
Click to collapse
Yes, but please read the 1st again, I updated the post with final instructions (for now....)

I also tested this language Pack on the new T-Mobile 2.26 Rom and I can confirm it's also working on the new Rom.
My advice for now is, don't use the Mr. Clean Rom anymore, but the new T-Mobile 2.26 Rom and don't install the Extended Rom to keep it as clean as possible (or manually select what you want to install).

Hmmm... ..just came to tell you that I also run the latest T-Mobile ROM in Dutch now. No problems so far! 8)

I really find it very cool that we don't have to wait anymore for Roms in dutch!
We just grab the latest WWE Roms and turn it into Dutch, no problem
The Mr. Clean Rom was cool to test with, but I'm happy with the 2.26 Rom.

are there any other languages?

Nope, not explictit for the Wizard, only for Universal.
These packages that I am using now were custom created by Asukal especially for the Wizard!

is it possible to do the same thing for french ?

@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users

mccune said:
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
Click to expand...
Click to collapse
Yep....you're right on that

BA Localization (trying import to new ROM)

I just browsing 'round and i tried to make new rom with localised modules and dlls dumped from wizard (QTEK 9100). The problem is that i dont understand what to do with it.
ALL I WANT IS THEORETICAL INSTRUCTIONS HOW TO INTEGRATE THAT FILES
I've just tried to delete all files *0409* from dump of helmi's AKU 3.2 (1.3.2) rom and copy all *0405* files to this rom and make it, but there are several errors and i dont want to waste time.
Can anyone get me theorethical instructions how to make localised image if i have ORIGINAL LOCALIZED WIZARD ROM?
This is the CZECH LANGUAGE ROM original from T-MOBILE v. 2.21...
I just want to get localised modules and libraries from WIZARD to HELMI_C ROM.
Is this possible?
Thanx for the replies

Nobody knows?
Nobody can help? I wanna to make ROM and upload it to FTP, so it will be available for all (probably useful only for czech, but learn possibility for everyone)

It should not that hard if u hv a min AKU2.0 localization (mui etc)..
Quick tutorial (in hurry, hopes someday I'll post a more complete tutorial on this topic)
1. dump the rom.
2. delete all english mui in rom (xxx.0409.mui) (delfile xxx.0409.mui or delete it from dump dir)
3. add ur localitazion (addfile xxx.xxxx.mui or just copy to dump dir)
4. delete initflashfiles.dat in rom (at cmd prompt delfile initflashfiles.dat or delete it from dump dir)
5. add ur localization initflashfiles.dat (at cmd prompt addfile initflashfiles.dat or just copy to dump dir, remember to strip the 2 byte at the header file if u modify this file)
6. delete default.hv in rom (at cmd prompt delfile default.hv or delete it from dump dir)
7. modify default.hv at value (at cmd prompt type hv2txt default.hv to convert to default.txt file):
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
"Layout"=dword:xxxxx
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Keyboard Layout]
"Active"="00000xxxx"
[HKEY_LOCAL_MACHINE\MUI]
"CurLang"=dword:xxxx
"SysLang"=dword:xxxx
[HKEY_LOCAL_MACHINE\nls]
"SystemLCID"=dword:xxxx
"DefaultLCID"=dword:xxxx
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Transcriber]
"ResFile"="TraRes0409.dll"
"RecFile"="TraRecoEnu.dll"
xxxx= ur localization code 0409 for english, 0407 for german, etc.
8. save modified default.txt as boot.rgu with unicode format (better use notepad) and run make_boot_hv to create boot.hv and rename it (boot.hv) to default.hv then add to rom (addfile default.hv or just copy to dump dir) note, u might need to modify the user.hv also for the name of the notification.
9. built the rom (make_imagefs nk.nba or builtimgfs.exe and make_imagefs nk.nba if u use dump dir then nk2nbf ).
10. Done.
hopes it'll helps, reminds me if I forgoten something...

Thank you Helmi for answer, really great tut.. Have a nice day.
--EDIT: Oh sorry for that below just lack of the internet connection :-\

[TUT]Change Lang For Himalaya

Thread is dedicated to changing the language of the operating system Windows Mobile 6.1 for Himalaya devices.
It is in this subject, you can speak to this issue.
What would be the progeny
Kompatybile:
O2 XDA II, T-Mobile MDA II, Qtek 2020, iMate Phone Edition, TSM500, and other PH10 variants
At first, to our striped ROM:
1) Download: Kitchen For Hima
2) Unpacks stove to a folder and add the image there, our systems, or file *. NBF
3) Follow the instructions given there to get broken, modules and files on your ROM
Preparation:
The folder "dump", or obtained in OEM and SYS packages, deleted all files ending in *. mui in the name and number other than 0415
Modifying Modules:
1) Download: Actual Files Lang
2) After unpacking the contents, copy all the *. mui files and figures from 0415 to our catalog of "dump"
(need to get there from where it previously usuwaliśmy)
Polonization Initflashfiles:
1) Open the file from our initflashfiles.dat folder "dump" editor - Notepad + +[/ URL]
2) For example, it should look something like this:
Code:
root:-Directory("My Documents")
root:-Directory("Program Files")
; ------------------------------- Moje dokumenty
Directory("My Documents"):-Directory("Osobisty")
Directory("My Documents"):-Directory("Służbowy")
Directory("My Documents"):-Directory("Moja muzyka")
Directory("My Documents"):-Directory("Moje obrazy")
Directory("My Documents"):-Directory("Moje wideo")
Directory("My Documents"):-Directory("Moje dźwięki dzw.")
Directory("My Documents"):-PermDir("Szablony")
Directory("Program Files"):-Directory("Połączenia")
Directory("\Windows"):-Directory("Help")
Directory("\Windows"):-Directory("Czcionki")
Directory("\Windows"):-Directory("Programy")
Directory("\Windows"):-Directory("Autostart")
Directory("\Windows"):-PermDir("Menu Start")
Directory("\Windows"):-Directory("Temporary Internet Files")
Directory("\Windows"):-Directory("AppButtons")
Directory("\Windows"):-Directory("Ulubione")
Directory("\Windows"):-Directory("Rings")
Directory("\Windows"):-Directory("AppMgr")
Directory("\Windows"):-PermDir("System")
Directory("\Windows\System"):-PermDir("ConfigMgr")
Directory("\Windows\System"):-PermDir("DumpFiles")
Directory("\Windows\System"):-PermDir("CabQueue")
Directory("\Windows\System"):-PermDir("CertDtls")
; ------------------------------- Zawartość Menu Start
Directory("\Windows\Menu Start"):-PermDir("Programy")
Directory("\Windows\Menu Start"):-PermDir("Ustawienia")
Directory("\Windows\Menu Start\Programy\"):-File("Obrazy i wideo.lnk","\Windows\pimg.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Windows Media.lnk","\Windows\WMplayer.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Telefon.lnk","\Windows\cprog.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Kontakty.lnk","\Windows\addrbook.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Obsługa wiadomości.lnk","\Windows\tmail.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Notatki.lnk","\Windows\notetake.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Kalkulator.lnk","\Windows\calc.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Eksplorator plików.lnk","\Windows\fexplore.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("ActiveSync.lnk","\Windows\sync.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Internet Explorer.lnk","\Windows\pie.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Zadania.lnk","\Windows\tasks.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Kalendarz.lnk","\Windows\calendar.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Comm Manager.lnk","\Windows\CommManager.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Udostępnianie Internetu.lnk","\Windows\IntShrUI.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Łącze modemowe.lnk","\Windows\ATCIUI.lnk")
Directory("\Windows\Menu Start\Programy\"):-File("Menadżer SIM.lnk","\Windows\Sim Manager.lnk")
; ------------------------------- Przyciski aplikacji
Directory("\Windows\AppButtons"):-File("Kalendarz.lnk","\Windows\calendar.lnk")
Directory("\Windows\AppButtons"):-File("Comm Manager.lnk","\Windows\CommManager.lnk")
Directory("\Windows\AppButtons"):-File("Kontakty.lnk","\Windows\addrbook.lnk")
Directory("\Windows\AppButtons"):-File("Zadania.lnk","\Windows\tasks.lnk")
Directory("\Windows\AppButtons"):-File("Internet Explorer.lnk","\Windows\pie.lnk")
Directory("\Windows\AppButtons"):-File("Windows Media.lnk","\Windows\WMplayer.lnk")
Directory("\Windows\AppButtons"):-File("Obsługa wiadomości.lnk","\Windows\tmail.lnk")
; ------------------------------- Autostart
Directory("\Windows\Autostart"):-File("coldinit.lnk","\Windows\coldinit.lnk")
Directory("\Windows\Autostart"):-File("Zapraszamy.lnk","\Windows\welcome.lnk")
Directory("\Windows\Autostart"):-File("CapNotify.lnk","\Windows\CapNotify.lnk")
Directory("\Windows\Autostart"):-File("WiFiInit.lnk","\Windows\WiFiInit.lnk")
; ------------------------------- Szablony
Directory("\My Documents\Szablony"):-File("Pusta notatka.pwi","\Windows\blank.pwi")
Directory("\My Documents\Szablony"):-File("Notatki ze spotkania.pwi","\Windows\meeting.pwi")
Directory("\My Documents\Szablony"):-File("Nota.pwi","\Windows\memo.pwi")
Directory("\My Documents\Szablony"):-File("Nota telefoniczna.pwi","\Windows\phone.pwi")
Directory("\My Documents\Szablony"):-File("Notatka przykładowa.pwi","\Windows\sample.pwi")
Directory("\My Documents\Szablony"):-File("Do zrobienia.pwi","\Windows\todo.pwi")
Directory("\My Documents\Szablony"):-File("Pusta notatka.dot","\Windows\blank.dot")
Directory("\My Documents\Szablony"):-File("Notatki ze spotkania.dot","\Windows\meeting.dot")
Directory("\My Documents\Szablony"):-File("Nota.dot","\Windows\memo.dot")
Directory("\My Documents\Szablony"):-File("Nota telefoniczna.dot","\Windows\phone.dot")
Directory("\My Documents\Szablony"):-File("Notatka przykładowa.dot","\Windows\sample.dot")
Directory("\My Documents\Szablony"):-File("Do zrobienia.dot","\Windows\todo.dot")
Directory("\My Documents\Szablony"):-File("Rejestr przebiegu pojazdu.xlt","\Windows\VehicleML.xlt")
Let us remember that the rest of the added applications, files, skins, etc., must have the same reference position as described above.
Polonization Registry:
In this folder are the two registry files:
-default.hv
-user.hv
And XIP section, there is a file boot.rgu, which also have to edit.
Open each file separately, using the option given to us in the oven
Important:
-> In the beginning, you must first register to enter the line: [color = red] REGEDIT4
-> Also, see if between each key is at least one blank line, ie there is no entry
-> All files. Rgu save in UNICODE, so we have opened such as default.rgu in Notepad + + click File> Encoding> Unicode
-> New keys entered by us, can not double the old
In this way we have prepared a record, we can now freely edit.
1) BOOT.RGU
First of all, modify the file boot.rgu with the kernel. How do I get ready to modify XIP, I will not describe here.
We open our boot.rgu in Notepad + +
Repeat steps listed above, which are important for the functioning of such a registry.
Change the value of keys:
From:
Code:
[HKEY_LOCAL_MACHINE\MUI]
"Enable"=dword:1
[HKEY_LOCAL_MACHINE\MUI]
"SysLang"=dword:409
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:409
To:
Code:
[HKEY_LOCAL_MACHINE\MUI]
"Enable"=dword:1
[HKEY_LOCAL_MACHINE\MUI]
"SysLang"=dword:415
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:415
Now move on to the register in the main shell:
2) USER.HV
Change the value of keys:
From:
Code:
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:409
To:
Code:
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:415
3) DEFAULT.HV
Change the value of keys:
From:
Code:
[HKEY_LOCAL_MACHINE\MUI]
"Enable"=dword:1
"SysLang"=dword:409
To:
Code:
[HKEY_LOCAL_MACHINE\MUI]
"Enable"=dword:1
"SysLang"=dword:415
As for the rest of the file, registry, we need to review it and change all the names of folders and files an application system on Polish. We even base the files *. rgu from the downloaded file "Mui"
Polonization other applications:
Even check whether the change all files *. provxml
Poloniztion In conclusion, we have exactly one more time to review our "dump", or sometimes something is not neglected.
If everything is already in order:
Our system, through the kitchen, into a single whole, flash-ing and check whether the OS is complete polonization
Other, no polonization correct defects ...........
If you have any questions or problems, please write and help
GOOD LUCK!!!

Спасибо,буду работать.
Thanks, going to work.

Very please

Change Lang For Himalaya
nokser said:
Very please
Click to expand...
Click to collapse
Hello friends himaraya people that love if I want to solve the Chinese language as English. The above method will be used to edit? If the tool must have the Abga . Thanks in advance.

I do not know how to help, I was not able to change the language,done according to the instructions.

88plastilin said:
I do not know how to help, I was not able to change the language,done according to the instructions.
Click to expand...
Click to collapse
I have no files. BOOT.RGU
To bring change. do not know how to take it from out. Nbf.

You don't must change this files

master nosker..
can u explain if i want to change the language of WM 6.5 ROM which kitchen do i need and any tools?
i m new at this but i want to learn ..so i need ur help..
hope u'll reply soon..!
thanx in advanced..

First - change *.mui files in the dump

can u explain if i want to change the language of WM 6.5 ROM which kitchen do i need and any tools?

See my build kitchen for Himalaya's - modyfications system

cant open
defualt.hv
user.hv
can u please tell me WHICH SOFTWARE I NEED TO OPEN THESE FILES IN REG EDITOR....
please explain ..
and dont have boot.rgu
sir i m trying to change language of WM 6.5 rom...

convert to rgu and open notepad editor

can u explain it?
convert how n which file?

My Tutorial - Cooking Rom Himalaya's See here

will try n report soon

i m done with
USER.HV
DEFAULT.HV
still cant find BOOT.RGU in dump folder...
i've also checked the hidden files....

one more thing master nosker..
i replaced all the MUI files with the ones master EFSANE uploded..
but i cant understand ...in the dump folder there are folders like *.dll.mui
and the files efsane uploded have no folders...only files...
n cant find BOOT.RGU

From WWE ROM all works---From CHS ROM no works!
I used Himalaya_wm5_6_rom_dump_by_efane (__http://www.ctrlpda.com/attachment.php?aid=246___),get dump,
carefully
change *.*.mui,editing carefully( [TUT]Change Lang For Himalaya from nokser) USER.HV and DEFAULT.HV(__]http://4pda.ru/forum/dl/post/221333/hvedit_v2.zip___(or different)),initflashfiles.dat(editing__http://rghost.ru/242854__QuoteFilter (or different convertor) initflashfilesNEW and rename in initflashfiles.dat,END!
Himalaya_wm5_6_rom_dump_by_efane--->get nk.nba(nk.nba to nk.nbf not working!????not working checksum?!!!).
nk.nba,_imgfs_removed_data.bin.bak,_imgfs_raw_data .bin.bak copy to Ather_s_Hima_Kitchen(_http://www.rapidsharedata.com/go/101044700/Ather_s_Hima_Kitchen.zip.html_)--- carefully read and comply with all instructions on the screen and push button "Build nk.nbf from new nk.nba"-->get nk.nbf in folder "Upgrade".
Checking nk.nbf--reviewed again at the dump (checking carefully USER.HV,DEFAULT.HV,initflashfiles.dat).If all OK-- upgrade your device.
This is not normal, not logical, but I was able to!!!!

Don't touch file boot.rgu