n00b help on upgrading on vista - 8125, K-JAM, P4300, MDA Vario Software Upgrading

IPL 1.08
SPL 1.08
Radio Ver. 10.9.10
ROM: 10.1.0.811 WWE
Protocol Ver. 4.0.13.20
Windows Mobile Center 6.1
i seem to have done pretty much everything at this point and it just wont seem to upgrade.
the wizard update tells me ERROR 240: File Open
the others just seem to keep getting stuck on bootloader. i tried using the wizard tool but it keeps saying that "Error! No device detected!". also used EnableRAPI still no help.

Related

Help: Cannot Reflash back to Stock Cingular 8125 2.25 ROM

I am having a weird problem. I am unable to reflash back to the stock cingular 2.25 rom you get from the htcamerica.net site. Here's what happened. First of all I started off with
ipl 2.25
spl 2.25
GSM 2.25
OS 2.25
I was interested in istalling Faria's Aku 3.2 rom, So I downgraded to CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE then I ended up with
ipl 1.01
spl 1.01
GSM 1.12.10
OS 1.5.4.2
Then I CID unlocked the phone with lockwiz 02b. Then I installed Molski's RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2, which gave me
ipl 2.26
spl 2.26
GSM 1.12.10
OS 1.5.4.2
All seem to go well when I saw molski's flash screen, and his ext rom installed. But I was skeptical when I saw the GSM and OS still at 1.12.10, and 1.5.4.2 respectively. Anyways, I figure thats the way it should be. So then I tried to Flash Faria's FARIA-HTC-WIZARD -3.2-RC1-8MB, but nothing installed but the flash screen. The ext rom tried to installed but ended with a "windows cannot find autoconfig.exe" error. After several attemts I gave up and try to reflash back to the stock 2.25 Rom, and I am getting a "Upgrade error, invalid nbf file." Well something like that. Anyways, after several attempts, its a no go.
So what do I do from here. Do I start over with the downgrade rom and make sure that it was CID unlocked then start over again, or is there a step I am missing.
Ok, I figured it out. Finally. Apparently lockwiz 2.0 didn't CID unlock the device correctly, so I tried using lockwiz 2.0b and it Correctly CID unlock the device. I have finally been able to flash Faria's AKU 3.2. Yippeeeee.....

Error 260 installing ROM

I am with a problem in my wizard or in my MDA that I mattered of Germany for Portugal…
Whenever I try to install a ROM (as for example it finishes from FARIA wm6) it fails and says that is a error [260] and says that it found errors of communication.
Of moment mine wizard this with
rom version: 3.3.0.0 wwe of 11/10/06
radio 02.25.11
Protocol version 4.1.13.12 ExtROM version faria 4.0
in my PC I am to use activesync 4.5.0
It will be that somebody could help me to install new wm6?
Regards
_X_MaD_x_ said:
I am with a problem in my wizard or in my MDA that I mattered of Germany for Portugal…
Whenever I try to install a ROM (as for example it finishes from FARIA wm6) it fails and says that is a error [260] and says that it found errors of communication.
Of moment mine wizard this with
rom version: 3.3.0.0 wwe of 11/10/06
radio 02.25.11
Protocol version 4.1.13.12 ExtROM version faria 4.0
in my PC I am to use activesync 4.5.0
It will be that somebody could help me to install new wm6?
Regards
Click to expand...
Click to collapse
Is your device a G3 or a G4? -- If you don't know you haven't read enough.
Is your device CID unlocked? -- If you didn't do it yourself then it is locked. If you don't know how to unlock you haven't read enough.
Have you read and understood all the Sticky posts in this forum?
What OS is on the PC you are flashing from? If it is MS Vista, you haven't read enough.
Have you tried flashing from a second PC?
Have you rebooted the PC you are flashing from?

T-Mo 2.26 OK, but Can't 2.19 Radio

Good evening,
I have a G4 unl Wizard, that I am able to apply the T-Mo 2.26 upgrade without a problem. I now show:
IPL 2.26.001
SPL 2.26.001
GSM 02.25.11
OS 2.26.10.2
However, I cannot seem to downgrade the radio to 2.19. I have downloaded about every different copy of the radio, from the AKU 3.3 with 2.19, to just 2.19, etc.
I have in one directory:
EnterBootLoader.exe
nk.nbf (I have tried the 2,622,464 byte (Radio) and the 62,653,440 (Molski AKU 3.3))
ROMUpdateUtility_Wizard_NoID.exe (2.0.1.0)
ROMUpdateUtility.exe (2.6.0.0)
RUUGetInfo.exe
RUUResource.dll (2.0.1.0 and 2.5.2.0)
I generally have been trying to use the RUU 2.0.1.0 with the 2.0.1.0 dll, and the RUU 2.6.0.0 with the 2.5.2.0 dll, but am not getting good results. If I keep the T-Mobile Radio or the AKU 3.3 set the way they came, then I get an error about being unable to use the RUU *after* I click the "Update" button and the Wizard is in Bootloader. If I try to replace the nk.nbf from either the Radio build or the AKU build into the T-Mo 2.26 build, I get a "Cannot Read File" error *before* the "Update" screen (When it first gets PDA info).
Can anyone give me a suggestion on what to do? What I'm trying to ultimately do is to get IPL/SPL 2.26 and GSM 2.19 installed prior to moving to a WM6 build like XM6 or Faria...
Help? Thanks!
FIXED!!!
I fixed it myself, but if anyone else if having the same problem, download the RUU from here works!!! Just copy whatever nk.nbf you need and run it! It's in Italian(?) but we all know how to use RUU!

NBD Help

ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Navyaz05 said:
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Click to expand...
Click to collapse
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck
zabardast_1 said:
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck[/QUOTEA
Ok so I'm downloading NBD V9.2. Now after I flash back to 2.26, then flash the NBD V9.2, am i still going to have the Tmobile look? Just for some reason that really bugs me.
Click to expand...
Click to collapse
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Navyaz05 said:
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Click to expand...
Click to collapse
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Navyaz05 said:
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Click to expand...
Click to collapse
ok
ERROR [208] : FILE OPEN
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
as t-mobile 2.26 flashed and loaded good,than there's no problem with your bootloader,Ok,Now do this,remove your phone from the usb cable(disconnect it) and do a Hard reset of your phone by doing this :-
1. Press and hold the comm manager button and voice command button on the device together with one hand
2.Keep the two buttons pressed,and at the same time,with other hand,use the stylus to lightly press and hold the RESET button
the device will reboot and switch back on.
then delete active sync,reboot your PC,Run disk Clean wizard on Drive C:\ ,check all options in Disk Clean options,specially Temporary internet files and perform disk cleanup,after that delete all cookies in Internet options.
than download the latest version of Active sync ver 4.5 and install.
after this go into bootloader mode in your phone and connect to PC,but don't establish connection with Active sync,cancell the connection when it asks
when you connect witusb you'll see small usb showing at the bottom of bootloader screen (tri color screen) if it's there then open the rom file and try to flash,hope it'll be ok.
just post your present IPL/SPL...? it appears in red color when you switch on the phone and on the boot screen at the top.whatever the ipl/spl..? is there at the moment just post it,ok
I still believe the error 208 is due to some missing files,may be the NBD rom is getting some corruption
anyway you can also download official rom from the official site of your carrier ( the rom which came prinstalled when you bought the phone)
or download this rom and see if it flashes:-
http://forum.xda-developers.com/showthread.php?t=332544
Ipl/spl: 2.26
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Navyaz05 said:
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Click to expand...
Click to collapse
hmmm !
IPL/SPL 2.25 G3 AKU2 version,
ok,now tell me,when you flashed the original rom,was it successful,did it load up ? is your phone working normal with the original rom ?
I just feel as your phone is still not CID unlock,do one more thing,download this WST tool from the link below,install and run it,then post whatever report it generates,ok
http://forum.xda-developers.com/showthread.php?t=329170
Ah 1
so,when you flashed with T-mobile 2.26 you had ipl/spl 2.26,afterwards you flashed back with your original rom,is it cingular rom ? so ipl/spl 2.25 is registered. Both of these Roms T-mobile and original(cingular or ?) which you flashed are official roms.so only official roms are flashing and not the custom builds,hmm, so custom build rom can only be flashed if device is CID unlocked.
It means may be your device is still not CID unlocked ?
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Navyaz05 said:
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Click to expand...
Click to collapse
I do believe you that you did the cid unlock but lets be sure,on the wst tool there is a button with cid action written on it,hit it and tell me the report,ok
Reading CID block...
Calculating CID block sum...
CID checksum: 16A253F6
Decrypted stored sum: 4086926D7FFBD060
Decrypted calcd sum: 4086926D7FFBD060
Key index : 52 - Block index: 196
CIDkey: …øA‰òÏ5
CID IMEI: 356378003310489
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
go to this link,there is a attached file 'RUU MUN.zip' download it,then extract,there will be four files in it,ok now open the NBD 9.2 Rom compare there you will also similar named four files,now replace these files with the files downloaded in RUU MUN.zip,after replace run the new RomUpdateutility.lets see if works,ok
http://forum.xda-developers.com/showthread.php?t=334796
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Navyaz05 said:
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Click to expand...
Click to collapse
replace the files from MUNN with the one in NBD,
just a hunch may be bootloader of your phone not accepting romupdateutility of NBD,lets replace and see,it might do the trick.
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Navyaz05 said:
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Click to expand...
Click to collapse
YES YES YES !!!
You know it got be worried,how come every things fine,your phone is CID unlocked,you can flash T-mobile and official,than why not other custom roms,so I was convinced corrupted romupdatutility,
YUP ! go ahead fire up any wm6 now,I\ll suggest go for TNT excellent ro,see my sig using the same,anyway,i'm glade for you,take care.

Wizard little bit broken!? No GSM ROM ?

Hello,
I used Radio ROM 3.02 (from another topic) and I flashed it using ActiveSync and the RUU in windows xp. It says: Congratulations. So I thought it was working, but when I reboot my Wizard, it's booting very slow and I don't have phone signal.
When I boot the Wizard it says on the screen:
IPL 1.03
SPL 1.03
OS 6.1.0.0
But no GSM anymore!?
How can I fix this!?
It's very slow now and I can't use sound and phone functionality.
stephenophof said:
Hello,
I used Radio ROM 3.02 (from another topic) and I flashed it using ActiveSync and the RUU in windows xp. It says: Congratulations. So I thought it was working, but when I reboot my Wizard, it's booting very slow and I don't have phone signal.
When I boot the Wizard it says on the screen:
IPL 1.03
SPL 1.03
OS 6.1.0.0
But no GSM anymore!?
How can I fix this!?
It's very slow now and I can't use sound and phone functionality.
Click to expand...
Click to collapse
You Mean 3.08 ? GSM is it a G3 or G4?
Have You tried flash only RADIO ROM in another version? All radio ROMS

Categories

Resources