Hard key issue. - Tilt, TyTN II, MDA Vario III General

Good evening, guys!
I have a very strange problem, I'm new to PPC scene and bought a HTC TyTN II for christmas. I flashed my ROM and I'm using Dutty's Rom... I noticed that the "green phone" hard key isn't working. I think it worked before flashing, because when I pressed the button it opened my Contacts, now nothing happens, even the light of the pad doesn't go on. Is it a hardware issue or software? I really don't want to do a hard reset, because I did it a couple of times...

No suggestions?

I did a hard reset, but the problem's still here.. it might be a hardware issue.
But how could I know? Or maybe it's the radio?
Please help me!

I've changed the radio to 1.27.12.17 but the problem's still here... I'm really confused. When somebody calls me there's no way to answer him. Very strange. Is there a button mapping program, that can change these buttons? I'll be happy if I can use the start button as the "green phone" button if there's no solution...

I dont know how to fix your button problem but as to answering phone calls, when someone calls it should say answer on the bottom left corner of your screen and you can press it to answer.

jasonrush said:
I dont know how to fix your button problem but as to answering phone calls, when someone calls it should say answer on the bottom left corner of your screen and you can press it to answer.
Click to expand...
Click to collapse
Thanks. I noticed that it's a hardware problem... when I press it very hard it works... strange. Do I need to change to the default HTC ROM if I want to give my device for fixing?

Yes. Look at the Wiki and the sticky threads. The process is detailed there.

Related

T mobile wing... Dial button won't work

The dial button won't work on my phone suddently for some reason. If someone calls... it will allow me to hit it and it'll answer but if I just pick up my phone and hit the dial button (to dial someone) nothing will happen. It'll just show my today screen as if it's disabled for something. I can go the long way around and hit "phone" in my menu or hit the dial button when I happen to be in a program but it refuses to work just by pressing it?
Any ideas?
This is an double post.
One in the right section ''Harrald'' and a few hours later in this section ''Wings''
Please don't post anything about the T-mobile wing in the section of the HTC Wings!!!
This happens to often and is really annoying.
coolcat615 said:
The dial button won't work on my phone suddently for some reason. If someone calls... it will allow me to hit it and it'll answer but if I just pick up my phone and hit the dial button (to dial someone) nothing will happen. It'll just show my today screen as if it's disabled for something. I can go the long way around and hit "phone" in my menu or hit the dial button when I happen to be in a program but it refuses to work just by pressing it?
Any ideas?
Click to expand...
Click to collapse
Try power cycling your phone, happened on my s730 once and that fixed it. Not sure what caused the button to fail out, probably was trying to run to my on my phone at the time. Either way try that and see what happens. If that doesnt work what software changes have you recently made if any?
nielswillems said:
This is an double post.
One in the right section ''Harrald'' and a few hours later in this section ''Wings''
Please don't post anything about the T-mobile wing in the section of the HTC Wings!!!
This happens to often and is really annoying.
Click to expand...
Click to collapse
Its not really annoying, and it doesnt really hurt you. You can nicely point them in the right forum's direction or maybe try to help them out. No need to chew people out for an honest mistake, I am sure you have made a few. I know I have.
Have you tried hard resetting the phone? Maybe it will work or maybe not.

Call button not responsive

i´ve noticed today that my "green or call" button is not responsive.
I have to press many times to enter the phone, and also to select a number in contacts and make that call.
Anyone had this problem?
I made a hard reset because it might be some software i installed and the problem is still there
no one are having or had this issue?
Try a soft reset, the touchpad with the buttons often looses it's way.
tnyynt said:
Try a soft reset, the touchpad with the buttons often looses it's way.
Click to expand...
Click to collapse
Yes i did, and also tried another rom beside de original.
I can say, that some times work and sometimes don´t work that well, but even without a reset it starts to work again but with some flaws.
I´m starting to suspect that this is a normal situation on most of the diamonds and no one has ever talked very much about it
I own my diamond for about a month and it only started to do this a week ago, that´s very very strange.
battax said:
no one are having or had this issue?
Click to expand...
Click to collapse
Every now and them my soft touch panel loses it's way.
Here's what I do to reallign it: either press on the bottom right corner twice or soft reset.
tnyynt said:
Every now and them my soft touch panel loses it's way.
Here's what I do to reallign it: either press on the bottom right corner twice or soft reset.
Click to expand...
Click to collapse
Even with a soft reset sometimes the problem continues.
I don´t understand your ideia, so the call button have something to do with the soft touch (whell?) they are connected?
When you say press bottom right corner, you say press the disconnect button? and it solves the irresponsive call button?
Do you know anyone with a diamond having this issue? It seems to me like a hardware problem.
It´s very very anoying and it drives me crazy.
Today the call button is working flawless, so i don´t understand this, send to warranty or not
Does anyone have issues with the keypad?
I think that some people are starting to have problems with it.
ok this is weird..all my keys aren't working at all incl. the volume key except the home key..even the touch-sensitive scrolling doesn't work. Oh and the phone keypad, compact qwerty and full qwerty (if T9 is on) don't work too......!
ok this is weirder..long press end key works...I suppose my problem is software?
okayyyyyyyy even weirder..it's fixed. I uninstalled Cyberon Voice Commander and Remote Desktop Mobile. I have a feeling it's Remote Desktop. However, it was fine when I first installed both programs so I have no idea what triggered the problem......maybe because I left my phone at the post office?!
attakorn said:
okayyyyyyyy even weirder..it's fixed. I uninstalled Cyberon Voice Commander and Remote Desktop Mobile. I have a feeling it's Remote Desktop. However, it was fine when I first installed both programs so I have no idea what triggered the problem......maybe because I left my phone at the post office?!
Click to expand...
Click to collapse
Some application cause that symthons in the hardware buttons, but in my case i don´t none installed and also i don´t have no app to mapp hardware buttons.
I guess it´s a hardware flaw in my case.

HTC TD Headphonecable button problem

Hi
I have a touch diamond and a problem with the headphone cable.
I often carry the phone in my pocket, the cable plugged in and in turns
around the phone. It happens that the button is pushed twice and the phone makes a call of the last used number.
Is there any chance to disable this function?
Sorry for my English, I hope the problem is clear and it is the right Theme.
I searched at/in google(german/english). But i didnt found anything. So I think I didnt used the right keywords.
Best regards
Kuemmel234
Hi,
sorry for that double post, but maybe I have some tips.
It isnt any button on the phone (its not the recall button. I tried the program AE button +). Now, I try to edit the regestry. If you have any Idea, that might help me. Write me a PM or post it here, please.
So far,
Kuemmel234
Edit: I installed the program "HTC BUTTON"(thats a little Programm for the Touch HD, with this program you can switch songs by double clicking on the headphone button). Now, if I double click on that button, i get a problem report. Thats enough for me.
Hm, my english is realy bad, isn't it? Im realy sorry.
If you have something for me (like a similar programm for the diamond), tell me, please.
So far,
Kuemmel234

Weird Kaiser Hardware Button Failure

Hi all, please can you help me with this!?
Firstly when my phone boots or is taken out of sleep mode it immediately activates voice record as if this button has been pressed. It then opens the dialler and types ‘EDFC’. If I open pocket word and then wake the phone up it also types ‘EDFC’ before doing the above.
My keyboard is not working and the only hardware buttons that function are the power button (only for a while), the camera button and the silver select button in the middle of the d-pad. The jog wheel and silver directional d-pad buttons occasionally come to life. The others don’t work (green call and red end buttons, ok, windows etc).
When I use the standard keyboard SIP on the screen the directional buttons and delete do not function?!
I’ve reverted to a stock ROM to make sure this isn’t the problem.
It appears as though my Kaiser thinks these buttons are being depressed, but I’ve checked them and they click normally and release when pressed (even though they don’t perform a function) so nothing is stuck down etc….
I’m going to use AE Buttons to try and unhinge the button functions for now, but it would be great if someone has any suggestions!!
Thanks in advance.
Update - AE Button won't unhinge the buttons or change their function to anything else (e.g. nothing). I can't stop this from happening every time the phone boots/wakes up!
Help!
Mine got the same symptoms last week except it opens quick something or other,and then the dialler dials 2547.The screen for my pin then comes up,which I can enter normally.Home screen fires up normally but the keyboard will not work or any buttons except the silver one in the middle.Searched a bit and this problem is very common although I cannot find a solution anywhere.Can someone please help
AE button didn't work?
When mine did that, I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!
That's the only solution I have. It's worked for me 2x.
Also try pulling the battery for 20 seconds or so and restarting. That has fixed my touchscreen not working after it gets spashed 3x. Yeah, my phone is old and abused, but keeps working.
Will
wasilvers said:
"I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!"
Click to expand...
Click to collapse
Thanks for your replies - I've got Orange sending me another one in the morning now and sods law it's just stopped happening.... Taking the replacement anyway in case it happens again.
For my knowledge, how did you reset the buttons? I deleted some registry keys to completely stop them working (although I couldn't find the registry keys for the red and green buttons).
Searching on Google there are quite a few reports of this, but no one has ever posted the cause!
I am having the same problem... please help. My phone is going crazy. I did a hard reset but still didnt solve the problem....
I am also having this issue. Phone starts typing EDFC and then initiates the voice recorder. I reflashed various ROMs and regardless of what was flashed.. initially they appeared okay, then it started happening again. I also tried hard and soft resets. Nothng has worked so far.
I resorted to disabling the keys and some of the applications which I dont use which appear to be getting started/run (Voice recorder for one). So far I havent had the issue, knock on wood.
I think this is more than likely a hardware error. My tilt is actually pretty old so I wouldnt be surprised. If someone finds either the cause or a workable solution please post. Im trying to hold off until January when my contact expires to get a new HTC.
I searched and searched but found no solution for this and ended up getting the phone replaced.
HTC seemed to know nothing of such a problem....
Have you tried whacking it?!!?
Hope you get it sorted.
brandall said:
Have you tried whacking it?!!?....
Click to expand...
Click to collapse
Hmm, yes, but I don't see how that helped my phone.
lol, all jokes aside, my friends, I ask in this thread as well,
what is causing this problem? I ran into this issue after ALL my buttons stopped working (except for the power).
I installed a new rom (I forget which one), and still nothing works except for power button.
It would be even better if someone knows the solution!
-Calling for Help-I'm still convinced it is a software/registry problem...
Okay, so there's no solution available for this weird problem of ours.
On the bright side, however, it is amazing that we can still use the phone, even after it requires servicing (some way or another). I have accepted this handicap that has been placed on my phone for now, simply hoping it will grow out of it one day.
But something isn't right. When I looked in the registry (trying to follow some directions I found within the wiki for when your keyboard STILL doesn't work properly), there was a discrepancy between what was supposed to be found in the registry and what was actually there. It wasn't that the values were wrong, it was the names of the values that were different. Why could this be?
Or even if you have moment of time, and you have an AT&T Tilt, and it works perfectly, maybe you could write up a run down of what you have hanging around in that section of the registry?
Hey, just so I can be sure, is there some place I can cross check what I have in my HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP with what is supposed to be there in a fully functioning AT&T Tilt?

help with problem

hi guyz
ive a AT&T Tilt (Kaiser 100). so ive flashed my kaiser loads of times no problem was running great until now when i unlocked it the PPT button and call program open up themselves and some ramdon keys such as E,D,C,etc are pressed!!
also the slide keypad stops responding but the lights are still on for it. the navigational buttons on screen side stop working and the start menu opens up by pressing the button in the middle of navigational buttons!! rest of the keys dont work. power and camera keys still work!
i gave my phone a rest for 4 hours and when i turned it on it started working fine and then again after 5 minutes of use same problem. sometimes in the middle of use it automatically starts working again fine and then same problem comes and this keeps going on!!!
one of my workers at the office mishandled my phone (i think) he couldn't figure out how to slide open the phone and tried everything
so i cant rule out if its hardware or software problem???
please help!!
Hard reset your device and see if that solves the problem.
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
jsngrimm said:
lol clown wats with u and hard resets? anyway yea try a hard reset or flash a new rom mabye
Click to expand...
Click to collapse
Because sometimes...well most of the times, with a help thread request like yours are solved with a hard reset . Going by the book...(oohh and it was late last night by the way )
On another note, seems like your friend did mess some of your keys and probably hardware issue. Try and mess with some keys and see if they are not stuck.
In most situations it quicker and easier to reset the phone. Just thnk about it, you don't have the original OS to repair with and you don't really have a method of sending commands to the phone.

Categories

Resources