Database Develop

Serious Tilt Problem

Ive Noticed Ever Since Purchasing My Tilt (about 3 Weeks Now) I Have Had To More And More, Have To Sleep On The Couch (my Wifes Doing). Is There A Rom Or Hack For This Problem.
......sorry I Could Not Resist.......

Maybe you should see if there's a CAB available that will remove her. I know there's a Yellow cab ready at all times
Also, see if you can find a registry hack that will disable the annoying capitalizing of every word in your posts. We Don'T Have To Capitalize Every Word Cause It's Annoying, and it wont qualify you for better parking if your CAPS lock is only partially disabled.

KD8DNS said:
Ive Noticed Ever Since Purchasing My Tilt (about 3 Weeks Now) I Have Had To More And More, Have To Sleep On The Couch (my Wifes Doing). Is There A Rom Or Hack For This Problem.
......sorry I Could Not Resist.......
Click to expand...
Click to collapse
I have had the same problem! And it got pretty bad for a few days, until I figured out a solution.
This is a bit complicated so pay very close attention (or you may want to jot these instructions down to refer to later):
1. turn the phone to look at the right side of the unit
2. locate a tiny button with a little red symbol on it. (You may have used this jewel of a button to awake your awesome Kaiser (a.k.a. at&t Tilt) phone when it has fallen asleep (while you got distracted for a few moments).
3. PRESS this button for only 1-second and release. I have learned - through trial and error - that this button also turns OFF the phone. BUT DONT WORRY! It's not really off, its just sleeping and you will still receive calls, text messages and even calendar event reminders (whew I worried about receiving these!).
I know these instructions can be very stressful, but they may have saved my marriage. I would highly consider you trying this procedure at least once an evening (like during meals, when your spouse is trying to communicate with you, and especially (grin) at 1am while your laying in bed browsing the xda-developers forums for all the cool tools, cabs and Roms out there and your wife rolls over and says, "don't you ever put that thing down??!!"
;-)

Sorry about the caps i wa not paying attention.

KD8DNS said:
Sorry about the caps i wa not paying attention.
Click to expand...
Click to collapse
I thought your post was funny. This place can use more light-hearted comedy.

ronfin44 said:
Maybe you should see if there's a CAB available that will remove her. I know there's a Yellow cab ready at all times
Also, see if you can find a registry hack that will disable the annoying capitalizing of every word in your posts. We Don'T Have To Capitalize Every Word Cause It's Annoying, and it wont qualify you for better parking if your CAPS lock is only partially disabled.
Click to expand...
Click to collapse
You have to make sure you get the right kind of cab though... It can be confusing because here in the DC area yellow cabs aren't yellow, they are bright orange??? You must be very careful because you must be sure you really want to do that before you run the cab. It is usually very painful, difficult, and expensive to uninstall the wife update. Even then if you manage to partially uninstall the wife, if you have added new devices to your PAN while the wife update was installed then it may take up to 18 years to fully uninstall the wife. It wrecks havoc with your network settings, and often once uninstalled the wife update will often take half of your network resources and permissions with it (sometimes all of them!). Also be very careful of MIL.dll. It often installs itself in the background when the wife update is being installed. MIL.dll is often considered spyware, nagware, and often it falls within both categories, but there is often nothing much that can be done about MIL.dll without uninstalling the wife update. Some feel it is worth starting all over again with just a bare-bones system, but most feel that the benefits of the wife update outweigh the negatives. It is better to live with the occasional problems that the wife update may cause, than to try and remove it.

Try hard reseting her. Hold down both of her soft nipples and stick your stylus in her butt. That should get quick results. haha

ronfin44 said:
Try hard reseting her. Hold down both of her soft nipples and stick your stylus in her butt. That should get quick results. haha
Click to expand...
Click to collapse
I knew I was doing something wrong, I kept putting her in bootloader mode but she said she'd never done that before!
Mike

ronfin44 said:
That should get quick results.
Click to expand...
Click to collapse
I thought sticking your stylus in the wrong hole caused permanent damage to your pins?!

Steve-C said:
I thought sticking your stylus in the wrong hole caused permanent damage to your pins?!
Click to expand...
Click to collapse
I'm using Dutty's special Bottylicious ROM. Works great with softcore resets like that! haha

LMAO! Maybe you could just install another cab Iv seen around, It's called abitontheside.cab, it can be simply installed without going through all the bother of unstalling the wife update. Just make sure you dont run both at the same time as Iv heard they can conflict with each other.

I bought my wife an iPhone, now she can't say anything because she spends just as much time surfing the web and playing with the other 4 things you can do with an iPhone

Screen goes black when I slide out keyboard

My Xperia is messed up....
Has NO damage... No water damage, hasnt been dropped, overheated or anything...
Last night I was going to respond to a text and slid out the keyboard and the screen went blue... okay...weird... slid it back, still blue. So I restarted it. Heard the "ding" for the power off button. Turned it off. Turned it back on. Started to respond again. Slid it out... No blue screen, just had black and white lines, then went black, but it would never come back to the regular screen.
I have NO idea what triggered this. NONE. I've had no problems with my phone whatsoever.
What I've dont to try and fix it:
-Turn it on and off (obviously, to get the screen back on)
-battery pull
-sim pull
-hard reset
I bought the phone off of EBay. Has no warranty. I got a warranty with Squaretrade for my fiance's cell phone and when he needed to make a claim (it would power off when it was clammed shut...no damage to it. Also you couldnt hear out of the phone at all)) they said they couldnt do anything. I decided that was worthless and that I'm not going to get a warranty with them. Smart move not getting one period, but Ive had bad expierences with them anyways...
What else can I do? I'm @ a total loss... I don't know what else I can do since I've dont the hard reset. I'm trying to avoid taking it to a cell phone repair place b/c I have a hard time trusing people with electronics now (long story) unless I know you.
Thanks for reading and helping if you can!!
​

Erinc2005 said:
My Xperia is messed up....
Has NO damage... No water damage, hasnt been dropped, overheated or anything...
Last night I was going to respond to a text and slid out the keyboard and the screen went blue... okay...weird... slid it back, still blue. So I restarted it. Heard the "ding" for the power off button. Turned it off. Turned it back on. Started to respond again. Slid it out... No blue screen, just had black and white lines, then went black, but it would never come back to the regular screen.
I have NO idea what triggered this. NONE. I've had no problems with my phone whatsoever.
What I've dont to try and fix it:
-Turn it on and off (obviously, to get the screen back on)
-battery pull
-sim pull
-hard reset
I bought the phone off of EBay. Has no warranty. I got a warranty with Squaretrade for my fiance's cell phone and when he needed to make a claim (it would power off when it was clammed shut...no damage to it. Also you couldnt hear out of the phone at all)) they said they couldnt do anything. I decided that was worthless and that I'm not going to get a warranty with them. Smart move not getting one period, but Ive had bad expierences with them anyways...
What else can I do? I'm @ a total loss... I don't know what else I can do since I've dont the hard reset. I'm trying to avoid taking it to a cell phone repair place b/c I have a hard time trusing people with electronics now (long story) unless I know you.
Thanks for reading and helping if you can!!
​
Click to expand...
Click to collapse
Search the forum?

All I can find is if the screen is already dead or whatnot....I've already searched before I posted. I didnt want to post a worthless thread.

how long have you own the phone..?
and what rom do you use?...

Arju007 said:
how long have you own the phone..?
and what rom do you use?...
Click to expand...
Click to collapse
Since about March of this year, and ROM--WM 6.1

Go to the service centre and maybe ask them to quote a price, i had this problem

dadeadman said:
Go to the service centre and maybe ask them to quote a price, i had this problem
Click to expand...
Click to collapse
Did yours just happen for no reason?...Out of the blue?

I have this problem on one of mine also....it appears the flexribbon has gone bad...lcd is good....but when the keyboard slides out the screen goes black...tried another board and lcd in the phone problem still persists...this only leaves the ribbon as the culprit.
Regards,
WC

Wild Child said:
I have this problem on one of mine also....it appears the flexribbon has gone bad...lcd is good....but when the keyboard slides out the screen goes black...tried another board and lcd in the phone problem still persists...this only leaves the ribbon as the culprit.
Regards,
WC
Click to expand...
Click to collapse
Ill be sure to tell the people @ the service center what the problem could be. That helps alot. Upsets me that I had to do a hard reset for no reason and mess my phone all up, oh well!

Erinc2005 said:
Did yours just happen for no reason?...Out of the blue?
Click to expand...
Click to collapse
Yup out of the blue

same problem here wildchild is correct its the rigid flex ribbon. unfortunately it will take a month before the parts arrive since its not readily available at Sony Ericsson service centers...

Unfortunately i just got this problem yesterday.
Suddenly, when i slide out the keyboard, screen fades and goes black.
When i slide it back screen is still on but black.
To bring it back i just click power button twice to put it to sleep and wake it up again. I assume this is the same problem and the ribbon cable is loose, correct ??
I was thinking of following one of the disassembly vids to try and open it and make sure the cable is connected correctly.
What do you guys think ? Give it a shot or too risky?
I am not sure if the ribbon cable is damaged and am assuming its just loose because the screen works fine without the keyboard out.
Any advice would be appreciated.
P.S - had the xperia 3 weeks now, bought it used (about 6 months) with no warranty, Its X1i running Energyrom 3.0 (05/08) build.

A month?? Man, that's a long time... geeee wiz. I asked them asn they said about 7-10 busimess days, so we will see... but I trust it'll be about a month since you said they don't have the parts. I shipped it off Friday, put insurance on it, and said a prayer. I hate my Quickfire, its my backup phone... HATE, LOATHE.... DIEEEEE lol.
Ive been searching for other phones to replace this one if i continue to have other problems... but i cant find one I like. i Love WM, the QWERTY, and touch. Felt like i was send my child off to school or something.​

I was actually able to find the flex ribbons on ebay took 6 days to get them from china, bought two of them since I have 2 sitting here with the same exact issue....they were about 60 dollars a piece and are here already...will report back after I repair the phones....
Regards,
WC

hey man.. i got the same thing happened to my phone also.. slice keyboard out screen gose black... but phone is still running... why dont chu try the black card in ur box... give them a ring they should help u out... i bought my from ebay also... but lucky is a x1a so in melb which telstra sale it... check urs if is a x1a or not.. it should come with a warranty for 12 months... hope this can help...

I have this also, my pghone is 5 months old. Senrt it away and they didnt have parts. After 3 weeks Sony sent an exchange unit. Opened up the box but the exchange unit is broken! The optical pad doesnt work at all and when I make calls no one can hear me at all..

I had exactly the same problem, besides the regulary cracks
So ive send it in, and a week later ill got a new one. Even with a second battery lol.

The flex cable fixed my issue....so to confirm this is the issue....repaired mine this evening, working perfect, abit tricky to get it all apart but is doable....
Regards,
WC

I got my phone back from Sony on the 9th. They said there was a loose part. I sent it off on Aug 28, and got there on Sept 2, so it didnt take long at all like I thought it would. I was so tired of the other phone. Sad when a phone runs your life haha.
That was such a nice day...went and got fitted for contacts for the first time as well as a getting a new vision rx, came home with perfect vision and what was on my door step, my beloved X1i. I smiled sooooo big. I didnt expect it for a month! They said it should be 7-10 days at the service center though when I called them.
It was still under factory warranty, so I did'nt have to pay for the repair, but I sure would have paid if I had to... lol.

sigh having the same problem now
i used to be excited to put my treo 750 to sleep before when i changed to x1. but apparently i keep taking it out of the box again everytime i have to get my x1 repaired
i just got it back 2 weeks ago when i got fed up with the keyboard button problem.
now it seems i have to bring it back once again since the screen goes blank on me when i slide out the keyboard
hopefully they can fix it on the spot, maybe just a loose connection as compared to a broken ribbon.
was hoping to use the GPS when i go out of the country, paid and got the needed maps already. but i have only a week before i leave. hopefully itll get fixed by then

Dropped my Tilt in a pitcher of beer. Suggestions needed.

Ok. As I stated, I dropped my AT&T Tilt in a pitcher of beer. I dried it out and it went to bootloader mode. I was able to reinstall the stock rom from the HTC website, and all functions worked for two days, then it went back to bootloader mode again. Now I can't get the rom to install. It starts installing but I keep getting connection errors before it completes. I think the USB port may be screwed up.
Anyway, I know there are threads about rescuing your phone from bootloader mode, and I may or may not continue to mess with it. But what I really wanted to ask is which phone you'd buy to replace your Tilt if you had to buy it out of pocket. I'm not due for an upgrade, so I'll have to pay full price. I really liked Windows Mobile and my favorite programs were Garmin and the three S2 programs.

I got the stock rom to install AGAIN.
We'll see how long it lasts. Still, I need to be looking for another phone. On the AT&T website it says a replacement Tilt would be 400 bucks and a Fuze would be 500, wtf. I paid 99 for this refurb Tilt. Man I hope it stabilizes.

volumnus said:
We'll see how long it lasts. Still, I need to be looking for another phone. On the AT&T website it says a replacement Tilt would be 400 bucks and a Fuze would be 500, wtf. I paid 99 for this refurb Tilt. Man I hope it stabilizes.
Click to expand...
Click to collapse
You could always buy a used Tilt from the Marketplace, Since, you know, you seem to drop it in beer a lot.
Typically in my Personal and Professional Experience, Electronics don't survive Swimming very well.

Update
Ok. This is frustrating. I have downloaded the latest HTC Rom twice. Both times I was able to install it, and every function worked perfectly for about twenty-four hours. Then, both times, while downloading my email, it went into bootloader mode. Any suggestions? Do you think another Rom might be more stable. Here is what the page says:
KAIS1*0
SPL-3.56.0000
CPLD-8
It says "Serial" at the bottom, but it changes to "USB" when it's plugged in.

volumnus said:
Ok. This is frustrating. I have downloaded the latest HTC Rom twice. Both times I was able to install it, and every function worked perfectly for about twenty-four hours. Then, both times, while downloading my email, it went into bootloader mode. Any suggestions? Do you think another Rom might be more stable. Here is what the page says:
KAIS1*0
SPL-3.56.0000
CPLD-8
It says "Serial" at the bottom, but it changes to "USB" when it's plugged in.
Click to expand...
Click to collapse
I suspect it has something to do with being dropped in beer......
Did you immediately remove the battery? Did you clean off the beer? Did you let it completely dry before powering it back on?

Perhaps its hungover. Have you tried dropping it into a glass of aspirin?

I found a way to make my phone somewhat live-with-able.
Ok. My phone works exactly like it used to except it gets stuck in bootloader mode periodically. I installed the fixed Hard SPL that is supposed to address this issue but it probably wasn't designed to correct beer damage. lol However, I found something that allows the phone to boot up normally. It's this. It was one of several suggestions in the WIKI, and this way you don't lose all of your programs and stuff. The phone powers up normally if you leave out step three.
1. Connect via MTTY as described above (Type the following commands without quotes).
2. Type the "set 16 0" and press enter. This removes the RUUNBH flag.
*********************LEAVE OUT*************************************
3. Type "task 8" to format the device. Yes you will lose all your data - if this is a problem, leave out this step, but if the problem isn't fixed afterwards, you'll have to add it back in.
*********************LEAVE OUT*************************************
4. Type "task 0" to tell your device to reboot.
5. If the phone didn't reboot, manually reset it now.

drmc said:
Perhaps its hungover. Have you tried dropping it into a glass of aspirin?
Click to expand...
Click to collapse
Definite win.

autonomous-inc said:
Definite win.
Click to expand...
Click to collapse
perhaps some black coffee would help.

drmc said:
Perhaps its hungover. Have you tried dropping it into a glass of aspirin?
Click to expand...
Click to collapse
5+ for top100 best answers lol

like one of the previous posters said, if you can take the thing apart and let it set and clean all of the surfaces with a contact cleaner, remeber like soda, beer also leaves a sticky residue that takes forever to truly harden.
my 8925 went into a pool after being pushed in and it was shocking me, it sucked but after a new battery and doing this it worked fine again but it took a week to fully remove/dry everything out.

Thanks.
I'm probably not skilled enough to take it apart. But I've let it dry out. I left it on a vent for three days. It works just like before, but it's still getting stuck in bootloader mode occasionally when it's turned off and then back on, despite installing cmonex's 3.56 Hard-2 spl and the most recent AT&T rom from HTC. I can easily use a Mitty "task 0" command to get it to boot up normally, so it's more of an annoyance really. I just have to make it a few more months until my upgrade. I guess the Fuze is still the best thing AT&T has out, right?
Also, I ordered a new non-oem battery off ebay, 1600 mah. In cmonex's patched spl thread, someone claims that bad batteries contribute to phones getting stuck at the bootloader screen. We'll see. It hasn't arrived yet.

Check here:
Viper's Guide to Water Damage
Trv06kviper said:
Viper’s Guide To Water Damaged PDA’s
This guide is to help anyone that has accidently left their phone in their pocket and went swimming,Went to answer a call and it fell in a puddle..etc, etc. I’ve worked for a major telecom company and have run into this situation so many times. Decided after dealing with this issue and reading so many myths, baking, rice…etc that are hit or miss and potentially very dangerous. Here’s a little guide that many people use with success to revitalize their wet cell phones.
Step 1: Immediately take the battery out of the phone and SHAKE any excess water off.
Step 2: Dry your phone first using a towel, wiping up anything that did not get shaken off. Now get a blow dryer on low heat and position it to blow on your phone about a hand, two hands length distance. Do this for about an hour or 2. Your phone should get alittle warm. If for any reason its hot to touch stop now. Let it cool off and increase the distance between the blow dryer and your phone. Also note, any ports that a covered need to be opened and memory cards, sim cards as well.
Step 3: after all visible water is gone or dry, place it in a small container (Tupperware works) slightly bigger than your phone. Now loosely pack your phone with cotton balls in your container. This works better than rice because it will not leave a white residue and it helps protect and keep your phone clean. You will let it sit overnight, at least 24 hours.
Step 4: Check on your phone, some of the cotton balls should be wet or moist. Inspect the phone, rotate it around and really look for any water. If it feels dry as a bone put the battery back in and fire it up. If it didn’t fire up check to make sure the battery is charged. If so then it may need some more time to dry out. DO NOT plug the phone into the wall charger and try to fire it up.
Step 5: If your phone did not fire up after 24hours BE PATIENT! Give it another 2 days then give it a go. It should fire up by now. If it doesn’t at that point use your wall charger. If at that point it doesn’t work, you need to consult some repairs.
Hope this helps
Click to expand...
Click to collapse

Thanks to the forum.
After installing cmonex's patched hard spl (3.56), it's working really well. No bootloader mode in two days. Keeping my fingers crossed. I've reloaded all my favorite programs, and it's running them fine. Thanks everybody.

well, this is why I love my tilt: my dad dropped his iphone in the pitcher as well, and lo n' behold > it died instantly
tilt kikz azz

My Nightmare Z1 (calls not working)

So back in January the 10th I made the mistake of buying my lovely Sony Xperia Z1, and as soon as I took it out of the box and started calling people I started getting told that they couldn't understand what the hell I was saying. I was really happy with my phone otherwise, and didn't want to turn in the phone. So I waited for the 4.4 update hoping it would fix it. I waited for quite some time, because every time I checked it was just one week away from release or something like that.
Anyways, when the phone finally got released, it didn't fix a thing, (and made the notification pull down menu ugly as hell, lol)
So I turned my phone in for repairs. About 2 weeks later it was returned to me, no problems found. And I got it back in the same condition, just factory reset. Wonderful.
So I went back with it again, explaining it in further detail, that it was sporadic, only sometimes would my calls become really choppy, and nobody would be able to understand me. So we wrote a much more detailed report on what is wrong with the phone, explaining everything.
Once again I get it back, no errors found, but factory reset. Only now the camera locks up every time I take a picture, and the power off button won't work, the wifi is slow as hell, cant watch videos, streams, anything. And I keep losing the signal.
Anyways, I've turned the device in now for the third time, but I have a feeling itll get returned still broken as hell, or even more broken somehow.
I talked to the guy at the shop, and he said they couldn't give me a new phone, even a new z1, either, if thhey don't find an error.
In the beginning the guys at the place I bought the phone thought it was because of the place I lived (a mountain village in the middle of nowhere)
But now I've moved across norway into a pretty big city, and same issues wherever I go
So now I'm at the end of my ropes, I'm starting to think I should just leave it in my car as a GPS and keep using my nexus 4. That or tape it to my toilet and use it as a doo doo target.

Faulty button on Watch R

I was lucky enough to be given a LG Watch R for my birthday back in february.
Since then Ive used it as stock, no modifications. Love it.
Today, Im just about to start the dishes, Go to check what time it is by pressing the button, only to notice its sticking out more than usual....
Sure enough, the button has popped out. Im lucky as its still in warranty, but Im still devastated as I have no clue how it happened.
Has anyone else have this happen to them? had a look around, seems like its only me...
Ive had a good try to get it back in, there are no screw markings so cant screw it in. wont just "click" in.
The button still works whilst its in, screen on and off, power off ect. Im just glad I didnt wash the dishes before checking
How are LG with warranty/replacements? this is my first LG product (other than my old tv, served me 7 yrs no issues, un like their watches..it seems...)
(first my tv fails its firmware update, then my windows 8 fails to recognise my hdd, then my sim card beaks :allowing everything but inbound calls to function: giving me a heart attack thinking it was something id flashed.., And now my LG watch button popps out?!?! WTF, am I cursed with tech now?!!?)

Have since spoken to LG..
They seem to be helpful so far.
If you have never made a claim against LG before, All I had to do was call, give the Serial number for my watch, the date it was purchased, a simple description of the fault.
They I have had to email them with photos showing the fault along with a given Ref. They have advised a turn around of 7 days for the repair/replacement.
I hope they can explain why/how it happened, so I can avoid any issues in the future. As I haven't found anyone else with the same issue, it doesn't seem to be regular. But for the price were paying, I like to know its going to be ok for another 2 years.

snowblind2142 said:
I was lucky enough to be given a LG Watch R for my birthday back in february.
Since then Ive used it as stock, no modifications. Love it.
Today, Im just about to start the dishes, Go to check what time it is by pressing the button, only to notice its sticking out more than usual....
Sure enough, the button has popped out. Im lucky as its still in warranty, but Im still devastated as I have no clue how it happened.
Has anyone else have this happen to them? had a look around, seems like its only me...
Ive had a good try to get it back in, there are no screw markings so cant screw it in. wont just "click" in.
The button still works whilst its in, screen on and off, power off ect. Im just glad I didnt wash the dishes before checking
How are LG with warranty/replacements? this is my first LG product (other than my old tv, served me 7 yrs no issues, un like their watches..it seems...)
(first my tv fails its firmware update, then my windows 8 fails to recognise my hdd, then my sim card beaks :allowing everything but inbound calls to function: giving me a heart attack thinking it was something id flashed.., And now my LG watch button popps out?!?! WTF, am I cursed with tech now?!!?)
Click to expand...
Click to collapse
I just had this happen to me on first day.. My fault for trying to wind the button like my wife's Apple Watch. Anyway a dab of crazy glue fixed it. I bought mine used so no warranty. If you have warranty go that route first. Just enough glue for the bottom of the button to contact the cell pad. Too much and you will freeze the button.
even though all looks 100% perfect I have decided to now treat this watch like it is not i167 rated for water. Basically I will keep it out of the shower and pool.