http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
Seems to have appeared as the FINAL offical release from t-mobile for uk users.
I've not tried it yet but the number does seem to suggest it is a slightly lower version than the Dutch one
EDIT MDAIIIUser
Added to wiki
no surprises
build of 2003se identical to Dutch rom previously released:
version 4.21.1088 (build 15159.2.6.4)
Extended rom just hasth changed regional settings (english UK default)
Added to wiki
Still a lot of echo.
Can't pair my Motorola HS820, BA sees the HS820, but error on connecting.
Anyone a fix for the echo and for the BT problem?
Use 1.40 before, was less a problem compaired to 1.42
Please help.
Regards,
Max
Report Back - T-Mobile Rom.. One week or so on..
Hi All,
Wanted to feedback my impressions of the new 1.42 T-Mobile UK Spec Rom..
Well, it's been interesting.. I now have (or have had) most of the faults that everyone else is experiencing.. I never used to get them at all with the i-mate 1.40 Rom or the NL 1.42 T-Mobile Rom.. I have listed the bugs below..
1 - One Hard-reset when inserted into GPS Car holder
2 - Several occasions where I've "lost" the Storage Card (when serching for it on the device AND through Active Sync)
3 - Interesting situation where I've started TomTom5 and I've suddenly had to go through the set-up process again only to be told that there's no maps (Can only attribute this to an occasion where the Storage Card is not seen by the PPC - See above).. Solved by remove Programs, soft-reset then re-install off SD Card.. (quite annoying as I was lost at the time!)
4 - Occasional failure for BT Headset being recognised on an in-coming call (I use the Logi-Tech Pro).. Solved by Soft-reset..
5 - Sometimes, after soft-reset, get a low performance from the Device.. ie, after soft-reset and switching to phone where it takes a few seconds to "build" the phone screen..
Strange but as I mentioned above, I don't recall getting these bugs on the 1.42 NL Rom or the i-mate 1.40 Rom.. I might try a hard re-set on Monday then re-install my tomTom, etc to see if it carries on.. If it does, I MIGHT switch back to the either :shock:
That's it really.. I have had the early T-Mobile 1.06, the i-mate 1.40, T-Mobile NL 1.42 and T-Mobile GB 1.42 and finally the WM5 Roms and from what I've seen, I place them in this order of preference..
1 - i-Mate 1.40
2 - T-Mobile NL 1.42
3 - T-Mobile GB 1.42
4 - WM5
5 - T-Mobile GB 1.06
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
dazed and confused
sorry if I'm being simple but ....
I though this was the last offical rom
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
MA_TMUK_11300_128_11200_SHIP.exe
Rather than
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
How did you maanage to find the link?
What is the diference between the builds - How can I find a change log?
What is the BA / MA?
:?:
See here:
http://forum.xda-developers.com/viewtopic.php?t=31360
No difference in UK and NL Rom..?
[email protected] said:
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
Click to expand...
Click to collapse
Hi Max,
The Rom is exactly the same and the only difference is the changes in the extROM that makes it either UK or NL Spec (ie, MMS settings, etc)
Hi Starfish - Perhaps you need to look at this for the answers to your other questions:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Oh, and BA is "Blue Angel" and MA is the "Magician" HTC Names for the devices..
Sorry I did'nt read close enough Magican vs Blue angel
starfish_001 said:
Sorry I did'nt read close enough Magican vs Blue angel
Click to expand...
Click to collapse
That's ok.. We all have to start somewhere.. 8)
Now, I'm not too sure how far advanced you are in Upgrading, etc but before you do, please remember the following that I put on another post on here..
MrPhilly said:
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
Hope this helps..?
Cheers!
Click to expand...
Click to collapse
How can I upgrade to a stable rom
I have tried the TMobile NL and UK version both give the Country ID eror with the extra numbers 17-17-38-38-38
How can I safely upgrade to the 1.42 version (I have read the Getting Started With The Blue Angel) .
Is that the way to go?
"I get the password error on the xda3nbftool for the nbf segment"
I would like to get rid of all the phonesound failure and systemhangs with TomTom5.10
My Qtek9090
PH20B 0 B
WWE E
DANGA001
1.40.00 0 0
1.40.556
1.13.00 13.00
Upgraded to this from the last O2 update (my BA is an O2 Xda IIs), and while for the most part it works fine, now if the device turns the screen off for power-save while out and about, the GPRS connection drops. I know the hardware is capable of keeping the GPRS connection alive in such a situation because, well, it didn't drop it under the previous two O2 ROMs I ran.
Anyone else had this problem, or know a fix? Hopefully it's something simple that I've overlooked...
I'm getting better Bluetooth support with this (whether through actual improvements in the stack or through sheer dumb luck), so I'd prefer not to downgrade if I can avoid it.
Upgrade for NON OEM/Carrier Blue Angel
I have an unlocked OEM i-mate PDA2K. Because of this I am unable to install the T-Mobile upgrade to 1.42.
Is there a way to get around this?
I tried using the MaUpgradeUt_noID.exe, but I was unsuccessful.
Any ideas on how to upgrade a non-T-mobile branded blue angel?
Thanks
problems upgrading a non-t-mobile branded PD2K
BELOW IS THE SCREENSHOT OF THE ERROR
Did you make sure you had the MAUpdate file in the same directory as the actual upgrade had been uncompressed into? Since it's missing the RUU.DLL file that is part of that package.
Basically, get the files out of the real upgrade, then copy the MAUpdate into that directory, then run it instead.
I can not unzip or unpackaged the shipped OS
When I double click on the file, it runs the file, when you right-click and select extract, it gives you an error.
How do you unpackage the ship package?
Me, I used WinZip, I think it was.
Can not unrar or unzip setup files from exe package
the instructions states:
Unrar or unzip all files in exe or rar into a new folder. I get an error when I do that.
I also noticed that the instructions states:
First Method (Quick/Easy) (TYPE II), but there is another method Second Method (Slower/Harder) (TYPE I)
I am going to give that a try
O2 XDA IIs
Hi from Greece,
A friend bring me to Greece from Singapore one O2 XDA IIs but it has a old versions:
rom 1.31.00 wwe
rom date: 12/13/04
radio v:1.02.00
protocol version: 1337.32
ExtROM version: 1.31.920 wwe
sorry but I'm newbie here, can you tell me what (and where can i find) I must download in order to update to the latest versions.
I allready download the latest version from O2.UK for O2-XDA IIS but I do not want to lock my device to any network and that's the reason who asked you and I do not install this I allready download.
I allready see http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades but I don t now what I must download.
thk u
Hi all
I am posting here in the slightest hope that someone can help me out. In a nutshell I have a T-Mobile MDA III PH20B that has ceased working
I have tried hard resets but still have no joy and wondered if someone could help?
First off, on the back of the MDA once the battery is removed it shows;
Model PH20B
IMEI 35303000.......
When it starts up, in the bottom right corner it shows;
NO GSM
D1.06.00 ENG
If I choose START > SETTINGS > DEVICE INFO I see the following on the different tabs;
VERSION
Rom Version: 1.06.00 ENG
Rom Date: 08/05/04
Radio version:
Protocol version:
ExtROM Version: 1.06.117 WWE
IDENTITY
Model No: PH20B
Platform PocketPC
IMEI: (and no number!!!)
Problem is, the phone will not work following me trying to upgrade the ExtRom from the T-Mobile website (http://www.tm-phonedownloads.com/download_manager_mda_3.html). It now keeps bombing out out with an error message saying;
ERROR 120: COUNTRY ID ERROR n-n-38-38-38
The ROM image that you are trying to use is not designed to work with your device. Please check the vender Website and download the correct ROM update.
This has never been tampered with, has never been unlocked and is now dead as a dodo. Can anyone please off any advice on how I can get it backup and running? I am lost (no pun intended) without my Bluetooth TomTom and phone.
When it connects to its cradle, my PC can still see it, so I am able to copy files to and from it. Thats about all I can do with it though
frostie
Well it seems like you MDAIII has a corupt system and thus you need to reflash it.
Best option for you is wiki.
Go to the link in my signature and see if you can find a original version that you can flash it with.
The No GMS means that the radio part is corupt.
The 1.06 means that you have a OLD version of the OS as we are now at 1.42.
The fact that you can still copy files just proves that the device can be seem but without a radio it is not much of a phone.
The country code error you can get arond by using the MaUpgradeUt_noID.ZIP application.
In all you will find out most of what you need of wiki.
Follow the link for the radio upgrade to solve the NO GSM
Follow the link for the 1.42 for the os
And BTW wellcome to xda-developers (its your first post)
Cheers for the welcome. Yup, first post so had to make sure that I included as much info as I possible could to show that I am atleast trying to help myself :lol:
Thanks for the pointers. I will work my way through them and let you know how I get on.
Very much appreciated.
Backup and running
You want to know what the problem was? I feel ashamed :lol:
When it says Bootloader Mode - I got that far, but then pressed the on/off switch to fire it up again. I didn't realise the upgrade happened when it was a dark screen with just Serial or USB on it.
Shame!
Anyway thanks for your help as its back up and running, and up to date with 1.42 and 1.15 I also thought 'sod it' and have managed to make it SIM free too
Again, many thanks.
Well 3 posts later and you now have 1.42 radio 1.15 and sim free, thats wiki for you.
Now cook your extened rom and get rid of all the operator crap.
Hi i have a orange unlocked touch diamond and it has 1.37.405.1 WEE Rom Date 12/06/08 Protocol Version 52.26a.25.09H. i bought it off some one from ebay. i want to upgrade the ROM on it cos it gets quite sluggish some times etc. I tried HTC.com to upgrade the Rom but it says its not suitable with my Touch diamond. can please one of the senior members help me as i have never flashed the ROM before, if I flash my ROM would my phone will get locked again on orange network as originaly phone was locked on orange.
thanx
Read the stickies in the ROM Development section.
Just download and install HardSPL then the ROM of your choice.
faz786 said:
Hi i have a orange unlocked touch diamond and it has 1.37.405.1 WEE Rom Date 12/06/08 Protocol Version 52.26a.25.09H. i bought it off some one from ebay. i want to upgrade the ROM on it cos it gets quite sluggish some times etc. I tried HTC.com to upgrade the Rom but it says its not suitable with my Touch diamond. can please one of the senior members help me as i have never flashed the ROM before, if I flash my ROM would my phone will get locked again on orange network as originaly phone was locked on orange.
thanx
Click to expand...
Click to collapse
once unlocked flashing it won't lock the phone.....once its open its open
look at my signiture and try what i use
but please read the all the info given before you start
if you do...all is well...if you don't...you could brink the phone...
good luck!
thnx i give it a go
thanks for all of your input i give it go see how it goes if i brick my phone then guess i'll be stuffed. lol
no luck error 260 and 202
Hi, i did the same as u told me i downloaded the HardSpl developers edition 1.40 and tried to run it but in the 3 stage it says diamond not connected with active sync but it is connected. don't know what the problem is i even tried different versions of hard Spl etc
regards
Hello, I upgraded my Blue Angel (SX66) to WM6.1 last week. I wanted to upgrade the radio from 1.02 to 1.15 but I have not been able to. I keep getting Error 101 (disconnect).
The device information shows the following info about my device:
Operator version : WM6.1PPC Phone
ROM version: 6.141WWE HT4.20
ROM date: 09/18/08
Radio version: 1.02.00
Protoco; version: 1337.32
ExtROM version: Black Kernel
Model No: PH20B1
Also, the RUU mode on my device shows BlueAngel and by USB mode is v2.06. I checked the beginners' section on this site and tried every possible trick (bootloader mode, modifying the country, etc). So, far nothing has worked. I would appreciate some guidance on this matter. Thanks!
remember the folder that you use when you upgrade to the latest ROM? Copy that same older on a different location on your PC and then open it and just delete the nk.nbf file and replace it with the latest radio rom which is 1.15.00 for BA and then run the same process, make sure the activesync is not running and your BA is in bootloader mode. Hope this helps.
Still having problems updating radio on Blue Angel
Thanks for the reply. However, that is still not solving my problem. I getting ERROR 101. CONNECTION ERROR. I tried the BAupgradeut in Bootloader mode. and I get the same problem. I read about a utililty called ROMupdate11a.exe and tried it, but it is still not working.
I wish I would've realized how difficult this process is. I would've made an effort to buy a Blue Angel device w/ updated firmware.
PS: I have read the Blue Angel beginners' section and the wiki and tried (to the best of my ability) to try all the tricks listed there. This is why I hope someone out there has experienced and solved the same problems I have.
Thanks again. I will keep looking, and hoping for a solution.
have you tried MAupgrade_UTL??? Ok like this, try to revert back your BA's ROM to wm2003se first, then do the Radio upgrade and afterwards upgrade to the latest ROM
I think I know why I cannot upgrade radio
I suspect that my Blue Angel's BIOS is damaged. I used the GetDeviceData to find get exact ROM for my PH20B1 device (see attached). I used to get PH20B1 on the DeviceData.txt file. Now I get a lot of garbled characters in the section where the model # used to be. Also, when I go to Device Information (under the WM6 settings section), I see the same garbled characters where the Model No section is.
I also cannot find the Country section. This may also explain why my phone fails to recognize any ROMs (even those flagged as WWE --- from the USA). That is not good, I think.
My fear is that my device will not accept any ROM updates (or downgrades). Does the above make sense? If so, have I messed up my Blue Angel for good or is there still hope? Thanks.
Never mind, problem solved. Thanks!!!
Hello again. I just wanted to let you all know that my Blue Angel is OK (finally). A friend of mine, who also has an SX66 successfully applied the Radio 1.15 ROM upgrade (after he unlocked my device). I am all set now. Thanks for your assistance and guidance.
Hi I have just got a breeze off ebay and want to put the SPV C700 rom on it but everytime I try I get Error [260]
I get the tri colour screen but it doesnt go any futher than this
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
I am running windows 7
I wish to install this rom
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship
I like the orange interface thats why I want it, any help much appreciated!
Thanks!
im having the same problem here, can someone give a guidance please....
Is it for sure Orange SPV C700 phone? Maybe it's an another brand equivalent (Qtek 8600...)
For original ROM look HERE
Edit:
Your SPL is higher than upgrade file SPL... Its your problem (i think). You have to first use SSPL and then try install favorite ROM. Usefull informations you can find also HERE
gutek85 i agree with you......................