Tilt hard buttons light when incoming calls. - Tilt, TyTN II, MDA Vario III General

Sorry if its a repeat but I searched a lot before posting this.
My Tilt (with Dutty's ROMs and other stock ROMs as well) when calls are coming, my screen lights up but the hard buttons don't light up so in the dark its hard to pick up the phone. Is there a fix for that?
Thanks.

There was a Thread on this, albeit without any solution.
Anyway I have got used to pressing the soft key on the screen when a call comes in when I am in the dark

srmz said:
There was a Thread on this, albeit without any solution.
Anyway I have got used to pressing the soft key on the screen when a call comes in when I am in the dark
Click to expand...
Click to collapse
That's true, TBH I always press the softkey to answer calls, don't know why though . I suppose i think, "I've got a touch screen, I'm gonna make the most out of it"

I wish I had a better interface for incoming calls like Palm's or iPhones where I have two big buttons on the screens, Accept call or Ignore call. Is there a dialer like that???

when i had my Wizard (MDA), if i got a call or text message, the hard buttons would light first then the screen...which was helpfull so i can answer the phone before the phone even rings (on my end and the other persons end)

Related

No backlight in hard buttons on the front when receiving calls

Any solution for that ?
not sure what you mean? a half press of the camera button turns the lights on
I think he means when a call comes in, the buttons on the face of the phone don't light up... I have been wondering about this too - it's not great when trying to answer a call in the car at night.
I have noticed that as well. Of course, I can touch the screen to answer, but it would be nice to see the red and green call buttons lit up as they did on my Wizard.
sqadan said:
I think he means when a call comes in, the buttons on the face of the phone don't light up...
Click to expand...
Click to collapse
This is is my problem.
Happens with the Vario III too!
At present I do not own a TyTN II, but soon that will change (most likely)...but i just want to verify something.
The front buttons; call send, end, ok/softkey, start/sofkey, (and to a lesser extent the directional pad) do not light up at all, or only when a call is coming in?
They are backlit (well, not the directional pad), they are just saying the backlight is not automatically triggered on an imcoming call.
So what is the solutions for this?
How to keep buttons backlit when call is incoming?
Is it possible to keep these buttons backlit as long as the screen is backlighted (would be easier to navigate while you are in car in the dark)
Thanks,
Piotr
I searched registry without result.
Thanks for replay, but is it really true that it can't be changed??!!
pleasy anyone, help!
Help me too
This evening I was walking to my car which was parked on an unlit parking lot. The backlight not coming up automatically is really annoying Any help would be appreciated.
I got used to it. Now I can just press the buttons without looking the phone since there's no solution to it yet.
I found out that solution is pressing the camera button half way down (which is very easy to find and to press) turns on the backlight of all other hardware keys on the front of the device. really helpful.
greetings
Now that i read this thread, i just realized i was feeling for the buttons to answer a call while i was driving cos it was dark & i still am not familiar with the buttons....it's only been a week since i got the TyTN II Would love to see a tweak for this if there is
I found out that solution is pressing the camera button half way down
Click to expand...
Click to collapse
That's not a solution. That's finding another button, to turn on the backlight to find another button
Anyway. I'm afraid I have to get used to it. But it's these little things which annoy me more and more. How come interface designers don't think of this?
Has anyone found a solution to this, it's really annoying, I was woken up by a call last night and was fumbling around trying to find the answer key in the dark . My old Artemis used to light up the buttons along with the screen on an incoming call.

End call & Answer call buttons not lighting up?

Was wondering, on my old 8525 whenever someone called my green and red phone buttons would light up, ( well, all the d-pad lights would )but on my Tilt it doesn't do that anymore. It makes it very hard at night to answer a call without pressing the screen. And don't get me started on how hard it is after a few drinks!! Its impossible!
If there's a setting i can use please do tell. Thanx
If you do a quick search in this forum you will find that it has been discussed many, many times. However, noone has come up with a solution yet - unfortunately.....
ok, thank you very much. I hope someone figure this out soon, I drink a lot and well . . . I need lights to show me the way!

Any way to lock screen phone buttons?

Is there a way to lock onscreen phone buttons?
Everytime someone calls, and diamond is in my pocket I either accept or reject call when trying to get it out of pocket.
So can I dectivate touch screen during incoming call?
Is there any tweak for this?
Greets guys
dont own a diamond but a quickfix...get bigger jeans.
No way... too big balls will bounce
resolved!!!
the fastest way to solve your problem is to install s2u2 (slide to unlock) newest version is 1.05 what i know...
so with the right settings when incoming call, you'll need to slide then answer/reject call or setup slide to answer or other.
its great i LOVE IT..
I just installed it... then uninstalled it 5 mins later because it looks GHASTLY!!
To lock the touch screen buttons you simply hold down the End Call button for a few seconds. Or is it the physical buttons that you're trying to lock?
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
lookass said:
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
Click to expand...
Click to collapse
You are right: I do not get you.
At least I do not see your point. You want to have the phone locked during incoming calls? - how senseless is that. Especially in that moment I want to have it unlocked to be able to accept it. That is the way all my phones worked.
What do you do, if you get a call and have a your cell in the pocket? I never encountered such problems...
Jeeeeeeeezzzzzzzz !!!
In Diamond one can answer a call in two ways:
1. press onscreen button
2. press hardware button
Onscreen button can be pressed accidentaly while taking out of pocket, pouch or whatever.
So: All i want is to have onscreen buttons INACTIVE while hardware buttons ACTIVE so I can answer call ONLY by pressing answer HARDWARE button.
Tapping onscreen button will do NO ACTION.
Hope now everything is clear, cause my english isn't very good
^^and you made a joke when i offered my quick fix =P
I have the same problem that by the time I get the case out of the case i find that I accidently answered or hung up because I accidentaly touched the screen,I tried slide to answer but it is not working properly on the Diamond
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
s2u2 not working?????
if its bad, ugly, or something, put an self image as backgruond, maybee that would cheer u up, im using version 1.00 that dosent got the slide to answer working good(beta), so i turned it of, then it worked great and i can still use hardware buttuns to answer, and if u dont like the apperence just remove background an d remove clock, all thats left is a black screen and the slider...
This thing with enabled screen answer/ignore buttons pisses me off too... May be we can install a new dialler without screen buttons?
Really no one cares?
nikitich said:
Really no one cares?
Click to expand...
Click to collapse
i don't think it's about anyone caring. i think it's about the diamond being a new device and no one having the tricks/tips/tweaks yet. patience
I understand that. But if nobody care about an issue no one will look for the solution. I would install another dialer but i do not know how to uninstall the existing one.
jehlinger said:
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
Click to expand...
Click to collapse
Be great if you (or anyone else?) could find a hack for this - I have the same problem when taking the phone out of the case. It would solve my (our) problem if only the hardware buttons could answer/reject an incoming call.
Regards,
Gary.
Since nobody answered this thread anymore... Did someone find out? Or did you give up?
I need this badly, stupid on screen buttons always go off
I had the same problem but after i did this I had no problem anymore.
The answer button in default phone skin(WM6) is much smaller so the risk of accidentally reject or answer the call is not so high.

[sticky!!!!] The "answer Only With Hw Buttons" option or similar solution...

[sticky!!!!] The "answer Only With Hw Buttons" option or similar solution...
...a lot to read... and a lot of solutions!
thank you guys!
Just an Idea... maybe its possible to set the Touchscreen sensitivity to VERY low everytime there is incoming Phone call. And then you cant accidentially press one of the onscreen buttons. However, i think registry entries only change after a softreset. MAybe there is some workaround?
this solution will affect the entire normal use of the diamond. :-(
anyone knows a cook?
it can't be so difficult.
I'm willing to pay the money saved in missed calls in one week. It could be a lot, for sure...
Agreed! it would be a great feature to have
diamondino said:
this solution will affect the entire normal use of the diamond. :-(
anyone knows a cook?
it can't be so difficult.
Click to expand...
Click to collapse
Well actually i meant it a different way. Imagine.. There is an incoming Call... This call is recognized, and the touch sensitivity is set to very low. After the call is done, or the call is taken, the sensitivity is restored..
yep... but i suggest this like a second try....
the easiest way is to create a new phone skin.
the best is a "only hw buttons" option
i can't believe to the drink beer app... useless but true... and nothing about this bug... it's incredible.
I would be satisfied to have ALL the hardware keys to be locked during incoming calls and the screen locked and need to unlock the screen with ie a slide before be able to answer... As the hardware buttons also is easy to press when it's in the pocket when your sitting etc.
diamondino said:
I think we're half a million to damn this bug.
WE ALL NEED to lock the screen buttons.
WE ARE BORED of losing calls or answer accidentally taking out the diamond from our pockets.
WE NEED A SOLUTION.
WE DON'T WANT S2U2 AS A WORKAROUND.
HELP US.
AND YOU'LL BE REWARDED.
['cos right now... we still spending money on calls we miss. s##t.]
support this thread.
Click to expand...
Click to collapse
I don't get it. My on/off button is set to lock all other buttons when the device is off, apparently meaning the display. At calls the display is off after a few seconds and I have two choices to bring it back - push the on/off or remove the stylo causing notes to launch. Hence the only insident where I can see a problem is when the display is trickered to go on (alarm or incoming call) and it's way down the bag you may push something. Here I suspect the solution is to have it in a pouch. Anyway, I have seen many yields about this so i'll surely be victimised one day as well.
Its a really challenging app to make.
Think about it. How can u lock the keys yet mantain the ability to answer anytime with one button.
Tough call
maybe using the light sensor ... in the pouch screen off- out the pouch screen on
emilceteras said:
maybe using the light sensor ... in the pouch screen off- out the pouch screen on
Click to expand...
Click to collapse
what if your are in the dark? I think the best solution is to make a dialer without the buttons
pcharouz said:
what if your are in the dark? I think the best solution is to make a dialer without the buttons
Click to expand...
Click to collapse
touch he screen to go on
emilceteras said:
touch he screen to go on
Click to expand...
Click to collapse
then were back to square one were it dials lol
cornelious2 said:
then were back to square one were it dials lol
Click to expand...
Click to collapse
No, touching the screen will not bring the screen ON, the only thing that will bring the screen ON is pressing a hard key.
It's an excellent idea to make the light sensor feel if it's in the dark, and if so shut down the screen, the only problem is that nobody knows how to reliably do this for all ROMs (even official).
Take a look here guys... already lots of posts on this
http://forum.xda-developers.com/showthread.php?t=402916&page=10
1 a new phone skin without any buttons is the easiest solution i guess
2 changing the sensibility pressure works only on soft reset
3 light sensor... nice, but i don't think it's the best way to do this
isn't a predefined "lock screen" function on the diamond?
i'm a developer but i dunno nothing about pda application... i think it's weird if no one thought to a simple "block screen" function.
emilceteras said:
maybe using the light sensor ... in the pouch screen off- out the pouch screen on
Click to expand...
Click to collapse
pouch....hated the thing...go on
i don't think many people are using the pouch now there is more choice
counterfitninja said:
Take a look here guys... already lots of posts on this
http://forum.xda-developers.com/showthread.php?t=402916&page=10
Click to expand...
Click to collapse
take this thread like an official request...
anyway, IF anyone konws how to work for developing a new phone skin... i'll do it. but i'm not into pda since this diamond and i dunno where to start...

Call reject hard button - this is insane!!!

By reading various posts about problems with accidently answering or rejecting calls I am aware that most people seem to be having an issue with the touch screen (or soft) buttons. However my issue is with the hard buttons. My Touch HD comes with the built-in slide to answer utility but what is the point of this, if at the same time the hard buttons are still working???
Basically, I have a Touch HD and am finding that I am accidently rejecting 50% of incoming calls because when reaching for my phone from a pocket I am accidently pressing the reject call button (the physical one, not the software one!). Even if I don't physically press it, it is sometimes being activated due to brushing itself with something else. I.e. my leg!
Is there a way to disable the physcial answer/reject buttons because I can't find the option? Makes the slide bar to answer/reject feature totally useless!
just some direction to go
There are many alternative screen lock tools out there. Most of them are free. Maybe some of them have your desired functionality?
Touch HD?
... also, this is the Diamond forum... maybe try the Blackstone forum, you may get a better response from there - after all, they're the guys that are using that particular device!
nadimaj said:
By reading various posts about problems with accidently answering or rejecting calls I am aware that most people seem to be having an issue with the touch screen (or soft) buttons. However my issue is with the hard buttons. My Touch HD comes with the built-in slide to answer utility but what is the point of this, if at the same time the hard buttons are still working???
Basically, I have a Touch HD and am finding that I am accidently rejecting 50% of incoming calls because when reaching for my phone from a pocket I am accidently pressing the reject call button (the physical one, not the software one!). Even if I don't physically press it, it is sometimes being activated due to brushing itself with something else. I.e. my leg!
Is there a way to disable the physcial answer/reject buttons because I can't find the option? Makes the slide bar to answer/reject feature totally useless!
Click to expand...
Click to collapse
TouchLockPro has the possibility to lock only the Hardware buttons. So that will suit your needs.....

Categories

Resources