I have trying to get my S730 to print to my hp deskjet 450wbt. The phone connects but will not print.
Any help on this would be greatly appreciated.
thank you,
jdm
This might help. Also, try calling HP (it couldn't hurt).
Related
Hello guys,
I was wondering if you could help an extreme newbie.
I just got my tilt a couple of days ago, and with the help of a friend i have installed Dutty's touchflow rom. My problem is the following:
I have a Sony Vaio laptop that connects to the internet wirelessly through my wireless router. My tilt also connects to the internet through the router. However if i connect the tilt to the vaio for an activesync or to charge, the wireless connection on the laptop crashes. It crashes even if the wifi on the tilt is turned off. It can only be restored if i disconnect the phone AND restart the computer.
Did anybody face a similar problem?
Any help would be appreciated.
Thanks.
It's an activesync issue.
When not connected to the PPC , Right click on AS icon in the PC.
Select Connections.
on the bottom you will see.
"Allow wireless connection......"
Mark the check box and your good to go
Nadavi
Hey buddy,
Thanks very much for responding. Tried it but unfortunately no joy. Its like my laptop loses the ability to connect to the router. I can see the connection but it just stays there, tries to get an ip, gets one and then crashes again...
Any other ideas?
what nadavi said, helps when you have problems connectin at your phone not your laptop.
perhaps your problem hs to do woth your network-configuration. AS gives a bridged network-interface trough to your mobile phone, connected via AS.
eventually your real-network-interace-driver or something else has problems with thi network-bridging ... did you tried to install AS 4.2 instead of 4.5 or otherwise?
aalexandrou said:
Hello guys,
I was wondering if you could help an extreme newbie.
I just got my tilt a couple of days ago, and with the help of a friend i have installed Dutty's touchflow rom. My problem is the following:
I have a Sony Vaio laptop that connects to the internet wirelessly through my wireless router. My tilt also connects to the internet through the router. However if i connect the tilt to the vaio for an activesync or to charge, the wireless connection on the laptop crashes. It crashes even if the wifi on the tilt is turned off. It can only be restored if i disconnect the phone AND restart the computer.
Did anybody face a similar problem?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
I bet you have a Intel 2195 or 2200BG wireless adapter in the notebook? There is a problem with some of the drivers for the adapter and Activesync that makes you wireless network disconnect when you plug your phone in for sync. I had the same problem on my former laptop, it went a way with a driver downgrade!!! if I remember correct
Another way of solving it was installing Trend Micro PC-illin 2007 Internet security. It installs some sort of driver that made it work, it sound crazy I know but it worked with that - I and more people that I know got it working that way but I dont´t like Trend Micros software
Hey easycure,
Thanks for this response. I took your advice and went the opposite direction. I do have a 2200BG adapter, but rather than downgrade, i upgraded the driver.
Worked like a charm. Thanks!!
@edi - thanks for your reccomendation too. In the end i did not need to go that way, but thanks all the same.
aalexandrou said:
Hey easycure,
Thanks for this response. I took your advice and went the opposite direction. I do have a 2200BG adapter, but rather than downgrade, i upgraded the driver.
Worked like a charm. Thanks!!
@edi - thanks for your reccomendation too. In the end i did not need to go that way, but thanks all the same.
Click to expand...
Click to collapse
Yeah it might have been a driver update I did, it was two years ago I had that laptop so I cant remember exactly But I am happy that it fixed it for you - I do remember how frustrating it was
I am having the very same issue. When I connect my Kaiser via activesync the wireless status information immediately appears on my laptop. The internet connection then stops working or only occasionally works. Took me an age to find a related thread! I'm about to update the drivers for the 2200BG adapter so I hope it works!
Cheers
hello, I have a laptop without wifi and I would like to use the tilt's wifi to connect to the net through usb. Can some one please provide step by step direction on how to accomplish this.
Thank you in advance.
I'd like to use my diamond as a bluetooth/USB gps and get connected to my laptop. Due too its bigger screensize, viewing maps on laptop got to be nicer, but then how ??? Any clues smart guys???
abe505 said:
I'd like to use my diamond as a bluetooth/USB gps and get connected to my laptop. Due too its bigger screensize, viewing maps on laptop got to be nicer, but then how ??? Any clues smart guys???
Click to expand...
Click to collapse
http://users.skynet.be/hofinger/GPS2Blue.html
Thanks bro, I'm gonna get it
You could also try GpsGate for PCC and PC..
Works great for me.
Hmm... I never even realised you could do this. Saves me buying a separate BT GPS receiver for my CarPC.
One question, how do you actually set this up over Bluetooth? It just asks me to pick a BT port, but I have no idea which port to use.
it's said that autoroute 2007 works on the PC, i'll give it a go
Hi,
I have my MDA Vario III setup to share its data connection with my MacBook via BlueTooth, which is all very good any well.
But I was wondering if anyone had managed to find a good solution for doing this on the Mac using USB instead?
Its easy enough for PCs with ActiveSync...
Ive looked round on the forum and the Internet, but there doesnt seem to be a clear answer to this...
Any help would be much appreciated.
Thanks,
Jon
http://weblog.techdad.net/2007/05/1...sharing-from-windows-mobile-6-to-mac-os-1049/
I think the treo 750 is wm
http://forums.macrumors.com/showthread.php?t=432722
There seemeed to be many more on google
hacman said:
Hi,
I have my MDA Vario III setup to share its data connection with my MacBook via BlueTooth, which is all very good any well.
But I was wondering if anyone had managed to find a good solution for doing this on the Mac using USB instead?
Its easy enough for PCs with ActiveSync...
Ive looked round on the forum and the Internet, but there doesnt seem to be a clear answer to this...
Any help would be much appreciated.
Thanks,
Jon
Click to expand...
Click to collapse
I have all Macs in my home and my home office. Bluetooth sharing is easy. Syncing with Missing sync , it's a great program, but that and others I have looked at, do not allow internet sharing through USB. I have had my Tilt for a year and a half and have yet to find a way.
Couldn't you use a linux method? I have a Mac Ibook 3g (collecting dust because macs are useless) and I've noticed that it's pretty much just linux with a crappy interface and one mouse button.
http://forum.xda-developers.com/showthread.php?t=450710&highlight=ubuntu
TBH i have not found a solution to this as such...
the blue tooth pan option is very very slow in transferring data between the phone and mac when using internet sharing
in the end the beast solution was to use wmwifirouter. the speed is just as good as pairing via usb with a pc. i do use the usb to give the phone a power supply however.
this is the best solution i have found so far
Ok I have been looking for a solutions for a long time. I want to use my shiny new Dell Mini 10 with windows 7 for turn by turn directions and i want to use my at&t tilt as the GPS receiver. So, what FREE solutions do I have? Google Earth would be sweet if it had VOICE directions.. but I know the odds of finding a free solution for that is going to be slim.
also, i keep thinking that i'll need a data connection AND a way to share the gps signal?!
bluetooth isn't an option.. at least not yet. I have to buy a BT dongle some day soon. HOPEFULLY i can find a miniscule BT USB thing so it wont stick out the side of the mini too much.
So i have 2 options for connections.. i have WIFI router on the tilt or i have to use USB. but as far as i know.. if i use usb i have to then CHOOSE between internet sharing or activesync... i need to use active sync to share the gps ports but i need internet sharing to get the data connection!!?? sooooo confused..
someone PLEASE help me
thats the situation.. to review... here are the questions i need answered.
1) what software to use on the laptop?
2) what software(s) to use on the phone?
2a) gps sharing?
2b) internet sharing?
3) how to connect the two? (usb, wifi or bt)
THANKS AHEAD OF TIME to whoever responds..
and please don't BURN me because I HAVE SEARCHED.. if you know the threads i should read then please just link me and i'll be happy to read them over..
Well, you'll need something like gps2blue
http://users.skynet.be/hofinger/GPS2Blue.html
on the tilt and Hardware Virtual Serial Port from here:
http://www.hw-group.com/products/hw_vsp/index_en.html
That will make the GPS on the Tilt look like a Serial port GPS device to the netbook.
That is the easy part. I don't think you'll find a free GPS mapping product with turn-by-turn voice commands.
Actually you will
http://www.amazegps.com/
Turn by Turn