Hi
I have a Qtek 2020 with WM2003 and a just install yesterday WM6 but I turn on the device put the pin and them appears a menu SimLock that said:
"Network is locked, please input unlock code"
What can I do to have my telephone?? PLEASE HELP ME.....
Thanks
Pb
Qtek 2020
TOPLOCK HIMA WM6 AKU.0.7.0
ROM VERSION: 6.00
ROM DATE: 09/08/2007
RADION VERSION: 1.18.00
Protocol version: 1337.38
check the himalaya wiki. Theres a page there about unlocking.
resp
hi
The instalation of WM6 dont remove the simlock off wall the Pdas?
What is the SimLock?
thaks
pb
search for a software called xda2Unlock
resp.unlock
hi
I found "all in one sim unlock tool" by "itsme" for XDAIIs.
Is this the software I need?
This will destroy the instalation of WM6 or the rom?
Thanks
pb
hi i had the same problem when i installed wm6.It said sim lock and told me to ask an unlocking code from my provider.I made a hard reset and everything was ok.Good luck.
arqto said:
hi
I found "all in one sim unlock tool" by "itsme" for XDAIIs.
Is this the software I need?
This will destroy the instalation of WM6 or the rom?
Thanks
pb
Click to expand...
Click to collapse
itsme's tool should do the trick. Unlocking SIM should have no effect on your installed WM6. In the unlikely event that it would harm WM6, just simply reflash.
But it's also very likely that you can just call your provider for the unlocking code. SIM lock is a way in which providers make sure to make money on "cheap" phones, the actual cost of the device is hidden in the cost per month or per call. Countries can have different laws:
-in Belgium the provider has to give you the unlock code when you ask for it, even if it's one day after purchase.
-in the Netherlands the provider should give it after 1 year (if you ask for it)
Once you've unlocked, you can shop for the cheapest provider. If you don't you keep on paying for a device you already paid...
Related
I have mda 3 locked to t-mobile and they can't provide me with unlock code.
Is there any other way to unlock this device ?
http://www.t-mobile.hr/20/20-30-10-10-10.asp?sifra=TMMDA3&ponuda=V2
hi! i have a mda III, until now you only can get the unlock code by paying 15 pounds to T-Mobile. I tkink that soon will appear an unlock tool on this web page, like xda2unlock.exe for the XDA II.
Do you know if we could unlock the mda III by changing the entire ROM (including the extended rom and the radio rom) for the Qtek 9090 one? If someone knows it, please let us know. Thanks.
You can't unlock the phone by changing the rom.
Then, where the simlock is located? out of the ROM perhaps? I don´t understand because all the devices (MDA III, Qtek 9090, Imate PDA2K...) are the same gadget and all come from HTC, so all its parts except for the ROM program would have to be equal. If you know the answer, please, let me know. Thanks.
where is the rom
Sure, the simlock is in the rom
so, changing the rom by sd card on boot loader is for me the solution
you have to test it
Could you be litle more specific about changing rom with sd card on MDA3 ?
Did you try this ?
Hi all,
Being new to this and knowing what could happen to your phone, I want to know if you can check if LokiWiz has worked.
Yesterday I tried if the sim lock was gone and it has, but what about the CID?
Please let me know if it is possible to check.
Device specifics:
Qtek 9100, via Vodafone NL.
ROM1.3.7.10 NLD
ROM Date: 9/29/05
Radioversion: 01.04.10
Protcolversion: 4.0.13.17
ExtRom version: 1.3.7.8012
Thanks,
Bas
Did you use LokiWiz for only unlocking your SIM or also for CID?
SIM and CID unlock are both different options in LokiWiz.
You can check if SIM unlock has worked by changing SIM card and
you can check if CID unlock has worked by upgrading your device to the latest ROM (that's the only reason why anyone would CID unlock their device ).
Good Luck.
I did both.
I did a SIM unlock, and the test worked out fine. I swapped cards with a collegue who has a T-mobile card. Worked.
I did also a CID unlock. But I don't know if that worked. Is there a way to test. Or can I go and duo the upgrade. Does that one check if the CID is gone?
Thanks in advance for the answer.
Bas
Errm ive neva done an upgrade but if your CID is not unlocked i would assume the phone would turn into a brick....but remember thats an assumption :!:
Guys,
I just did the jump at the deep end and ....... kept swimming. :lol:
The upgrade went well. At the moment I'm reinstalling all my software.
Thanks for the answers.
Bas
hi everyone
look
the mobile device hw6515 or hw6510 or 6910/20/50/60 or 6915/25/55/65 knowed like beetle and sable can be unlcoked by this ways:
1.- on cingular and movistar or other carrier devices only can be unlock by imei code (im not sure it work) and had a cost of 20 bucks
2.- on vodafone or imei who starts with 355xxxxxxxxxxxx sorry but i dont know a rom or a sim lock software app or imei conbination to unlock it
3.- if you had this follow letter in your ipaq like hw651Xx or hw694Xx you can search the rom unlocked in hp.com
model unlocked by hp rom:
hw6510b hw6515b
model maybe can be unlcoked by hp rom:
hw6510c hw6515c
hw6510d hw6515cd
hw6510e hw6515e
hw6510f hw6515f
yo need a coocked rom (unlocked)for:
hw6910/20/50/60
hw6915/25/55/65
enjoy it!!
pd: if you know other ways post it here
So you are saying that I can flash my Cingular HW6515 with the ROM for the "unlocked" hw6500 and thereby unlock my phone?
lot of thanks for informations.........
Hello,
I have a Vodafone v1405 Spain, or the HTC MTeor, and I ca'nt sim-unlock the unit.
I've tried a lot of methods, and I can't change the bootloader version.
Every time, I receive INVALID ID, or THIS UPGRADE IS NOT FOR YOUR DEVICE.
What can I do?
If I pay at imei-check.com for the unlock, how the simlock status will be afected if I upgrade to WM6 in the future?
If it's possible, I'd like the NON PAYING method for the unlock...
Br,
Jordi
SPAIN
Same problem!....help please
But my v1405 is sim unlocked.
Finally, I paid for the unlock solution.
Check http://www.imei-check.com/c700unlock.php
They will send you the file for the program.
Fast solution.
I paid 30€ EUR.
bYe.
Jordi
-SPAIN-
Hi Jordi,
I'm from Spain too, I suposed you have the same phone, vodafone v1405. I have the sim locked problem solved, but I'm getting crazy trying to upgrade to a new ROM.
Thanks
I tried a lot of versions, and finally worked the ROM version 1.34.251.1 and RADIO 1.38.00.10
If you want, send me a private.
Jordi
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
no. but you need to run simlock.exe which is in the windows folder. All of it's right here http://forum.xda-developers.com/showthread.php?t=361039
(a la bill lumbergh) If you could just go ahead and RTFM that would be terrific.
ich-t said:
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
Click to expand...
Click to collapse
Are you sure you have 6.1? AT$T has not released a 6.1 upgrade for the Tilt. If you are sure that you have 6.1, then it must be a cooked rom . In that case all you have to do is re-flash to whatever rom you want.
ich-t said:
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
Click to expand...
Click to collapse
if all you want to do is sim unlock your device than the only thing you need to do is pick up the phone and call att. The will give you the unlock code with in 5 minutes. (just tell them you are going over seas and need the unlock code).
If however you want to flash a rom to your device .. than you need to flash hardspl; a simple search "hardspl for kaiser" will pull all info you need. and after that you need to read the kaiser wiki section on rom flashing.
Once you have full understanding of what you are doing than happily proceed
I look at the my Rom version and it is 1.57.502.2.
and my Radio Version is a 1.27.12.11
So is that a WM 6.1 or just a 6.0.
if all you want to do is sim unlock your device than the only thing you need to do is pick up the phone and call att. The will give you the unlock code with in 5 minutes. (just tell them you are going over seas and need the unlock code).
Click to expand...
Click to collapse
Thanks, but I bought this phone on ebay used. So I do not have a contract and I want to use it with t-mobile
ich-t said:
I look at the my Rom version and it is 1.57.502.2.
and my Radio Version is a 1.27.12.11
So is that a WM 6.1 or just a 6.0.
Thanks, but I bought this phone on ebay used. So I do not have a contract and I want to use it with t-mobile
Click to expand...
Click to collapse
That is the original AT$T 6.0 rom . AT$T has not yet upgraded that rom to 6.1
If you want to unlock your phone to use on another carrier, just follow the steps on this wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
denco7 said:
That is the original AT$T 6.0 rom . AT$T has not yet upgraded that rom to 6.1
If you want to unlock your phone to use on another carrier, just follow the steps on this wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
ne of the steps are
"Do not try this on 6.1! You will need to downgrade to 6.0"
Wow you diggin in the graveyard
I have WM61 on my Tilt. I also have my unlock code from ATT. Where do I input the code?I was told there would be a window asking for my unlock code. Instead I get the phone stating I can make emergency calls.
Where do I input my unlock code? Does anyone know?
also tried simlock.exe in windows and it said code for region verified but then nothing else happened and i cant open the program again..can i downgrade to 6.0 somehow without using software because i am out of the states and i dont have the cord to connect to computer...also i have a mac so it wont work anyways..thanks for any help..i have searched all over but cant seem to find anyhting
http://forum.xda-developers.com/showthread.php?t=402393
yeah i read that..i did it.....now my att sim cant be recongnize...and my other sim cant be recongnized....any ideas?...
I have read soo many things that I think my eyes are starting to bleed. I have read so many things that make me question which is the most current. I think I am ready to do something then I read.
stylez said:
Wow you diggin in the graveyard
Click to expand...
Click to collapse
Can someone please help me figure out what to do? Do I, or do I not downgrade before I can sim/cid unlock?
My current phone is
R 1.65.21.18
G 25.88.40.05h
D 3.57.00.00
I have already loaded the Hard SPL, and am wanting to Flash soon. I have been reading for the last 4 days, and keep reading so many admins telling us to search and read, but there is soo much info out there, that it is hard to tell what is needed.
Also, Can someone explain the difference between a cid and superCID?
Liquidd.
Just make sure you have the proper hardspl for 6.0 and make sure you follow
http://forum.xda-developers.com/showthread.php?t=433835
and you are done.
You really should read until your eyes actually bleed. j/k
That worked great. Thanks a lot.
Liquidd