Database Develop

Problem downgrading to 208070_101_11310_qtek_wwe_test rom

hi,
well my motorola bluetooth stereo headset is of no use now that i cant shift from the KJAM_wwe_216901_216901_020710_ship rom to 208070_101_11310_qtek_wwe_test rom..
i actually have all the tools lookwiz and ewizard to unlock the cid..tried both to unlock the cid..with a error mess saying cannot copy itsutil.dll bcoz its in use,,plz reset the phone or the active sync and try again and then it wud give a mess saying cid unlocked and the phone wud reset itself...
after the phone boot up tried upgrading the phone goes in the bootloader mode and i get a mess saying [296] UPGRADE ERROR..plz download another nbf file..
tried downloading the rom again and repeated the process..with no effect
also tried to put the phone in bootloader manually by pressing camera and reset and upgrading with no effect..
PLZ advice as in what exactly Should BE donewhere exactly m going wrong..
Thanx
ankesh

well no reply so far...there can b two things either i ques was foolish or people have become too cold to reply..
neways thanx 2 HDUBLI i was able to do it after two complete days of work...
he is one of the most underrated member of this forum..i think people shd start respecting his work now

Any chance you could post here what you did? I'm facing same situation now, can't downgrade from 2.17 to 2.8.

Hi..
Flash any of the two custom ROMs...Button or TMO 2.17...then upgrade or downgrade to yr ROM of liking

anky26 said:
well no reply so far...there can b two things either i ques was foolish or people have become too cold to reply..
neways thanx 2 HDUBLI i was able to do it after two complete days of work...
he is one of the most underrated member of this forum..i think people shd start respecting his work now
Click to expand...
Click to collapse
I have another, less harsh theory. It's that no one had a useful suggestion for you until HDUBLI came along and offered advice. Or, your problem has been experienced by others and based on reading the forum and a little experimentation on your part, you could have solved it.
Rather than lash out at everyone because they didn't overwhelm you with solutions, you should be thankful these forums exist in the first place.
If you are uncomfortable or unfamiliar with the risks and issues associated with ROM flashing, I suggest you stick with what your carrier provided. This is a friendly and sharing forum, but you won't make any friends by bearing unreasonable expectations and criticizing.
Glad your issue was resolved.

hdubli said:
Hi..
Flash any of the two custom ROMs...Button or TMO 2.17...then upgrade or downgrade to yr ROM of liking
Click to expand...
Click to collapse
I can't get it to work. I flashed succesfully CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe and CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe but afterwards with both ROMS when I try to flash 2.08 Qtek test ROM, it goes nicely all the way to colors screen and then stops with "error [296] upgrade only".
I noticed that SPL stayed 2.17 after both ROMS, is it the reason 2.08 won't go through?

search forum carefuly...you hv to CID Unlock everytime.I hv been doing this...Pls try and post here

Hdubli I bow down to you, you teh guru
I flashed Button's ROM and then ran cid-unlock with aWizard 1.2. After that I succesfully flashed Qtek 2.08 ROM. Thanks for the help, man!

Want to go back to qtek9100 1.1.7.5 9/22/05 ROM
hdubli said:
search forum carefuly...you hv to CID Unlock everytime.I hv been doing this...Pls try and post here
Click to expand...
Click to collapse
Hdubli,
I have a bit of a similar problem here. I have a Qtek9100 with the ROM Version: 1.1.7.5 ROM date: 09/22/05.
Recently, I upgraded to AKU rom, but I see that this rom is unstable and gives me problems with wifi which used to work flawlessly on my original rom. I just want to go back to the 1.1.7.5 ROM.
In your post, you asked to flash a CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe rom and then CIDunlock and then flash old rom. My question is,
1. is this Custom rom the actual qtek9100 1.1.7.5 Rom ? If yes then I can just do this step.
2. If not, then you said that I need to CID unlock. Would cid unlocking void the warranty.
3. Further, if I cid unlock, do you know where do I find the installer for qtek 1.1.7.5 ROM, dated 9/22/05.
I know lot of questions here, but i would really appreciate any help on these.
Please advise.
Anup

** Urgent ** my Wizard cant power on after upgrade ROM

Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?

nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
That really sucks...

nicholas99 said:
Hi to all that can help me, i just flash the rom yesterday night that i have download and its completed the upgrade and go into the screen and running the installing of the program that come with the rom.
after the full install and the device restart without any more power and picture show.
I have try to charge the battery with wall charger and also replace with new battery but still no power.
Is that mean i'm flashing with a wrong rom and what should i do now.
Can i get it fix?
Click to expand...
Click to collapse
which rom did u flash it with ??? wat ver ur configs before that . ur ipl/spl version os and etc.
sometime it happens that the power button doesnt works ....
try poking the reset button wiz ur stylus ... press and hold for sumtime and c wat happens
if it starts then ... press it again and wen the screen goes blank pree the camera button and hold it ... ull get into the bootloader ... den connect da usb and flash a new rom or da old factry one ...
i use molski's rom its really stable

well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......

nicholas99 said:
well i'm using Wizard_Love_2.26.10.2_WWE_Novii+CF2 for the first but after that i just try to flash the rom the the chinese support rom which is Dopod_CHT_TW_RUU by using the newromupdateutility to flash it to my phone. At the beginning the rom flash successful and login to the device for install all the program that come with. After all the installation done the device will restart but never boot up anymore even u can see any green light flashing at all. Please dont tell me i damage my rom, should i send for repair?
or someone can help me out please......
Click to expand...
Click to collapse
did u try da soft reset ???

yes i did but nothing happen at all

Xda Neo
I have the same problem. IPL and SPL 2.15.00001 and tryed to downgrade but after restart it does not power on. Tried everything but no way to power on. Is somebody know how to make it work again.
Regards,

You guys tried to flash a G3 Rom on your G4 Wizard.
So your bootloader (IPL/SPL) that is 2.xx.0001 is overwritten by a G3 bootloader that is 2.xx, so in other words....your devices are bricked.
Please someone, correct me if I am wrong.
Molski

yup, I agree. Bricked hopefully someone can fine the JTag on these devices.

Wow that sucks! Full moon over Miami last night, naw that can't be it .....
Sorry but unfortunately I must follow my Grandmother's advice concerning when I don't have anything nice to say...

R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!

So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much

Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....

magicer said:
So, please someone tell clearly how to know G3 or G4 of the Wizard
thanks so much
Click to expand...
Click to collapse
a G4 has a .00001 on the initial splash screen.

ArtXT said:
R there NO ALTERNATIVE WAY for THIS?? HOPE we can help those people that made a mistake by upgrading to a ROM that doesnt fit to their WIZARD. due maybe because of TOO XCITEMENT they forgot to CHECK FIRST(PLS! ALWAYS CHECK FIRST) their IPL/SPL.
HOPE those master GURU's can do something!
Click to expand...
Click to collapse
The problem is that if your bootloader (IPL/SPL) is fuc*ed up, there is no way to get it in bootloader mode to do a flash!
Only known solution is with JTAG connector, but that solution is not a clear solution yet, but I dont know nothing about that solution (simply...because I never needed it).
Molski

Dr Puttingham said:
Sorry but I have no more tolerance for people who just jump in first without doing a little research. A while back when the G4 first came out we didn't know. Now everyone who puts out a ROM warns people about the possible consequences. And there's so many threads on just the first page with tales of woe... how can a person miss them all??
I'm sorry but my parents raised me to take responsibility for my own actions, as Baretta used to say" Don't do the crime if you can't do the time"
Similar to when a Cat 4 hurricane is coming at you and you don't leave after being warned.... then blaiming everyone but yourself...
And if anyone wants to rebute me on this, don't bother as I've neither the time nor the patience.
Bottom line is that flashing phones has the very real possiblity of trashing an expensive piece of hardware in a very short period of time. If one has any doubts, then they shouldn't do it! And if a person doesn't have a concern initially then they're asking for trouble.
Sorry....
Click to expand...
Click to collapse
I knew I have a G4 and can't upgrade/downgrade with G3 roms or even change IPL/SPL, but I did that :]
Just found ROM v2.22.1 (I think), like my original Wizard's was. I was so happy that I found it, that I forgot about G3 chips existence 8)
Well, ROM was for G3 -_-
Just ran too fast and slipped. Maybe I got that speed after very often Pioneer BCT 1430 flashing. It is just immortal :]

well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.

nicholas99 said:
well i know about the G3 and G4 but the rom that i downloaded from doesn't say anything about support G3 or G4 thats why i consider this rom doesn't included IPL and SPL just like the custom rom been make from other member.
Damn now i have to send my phone back to factory for fixing it. Lucky i still have a warranty of it.
Click to expand...
Click to collapse
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...

Dr Puttingham said:
I do feel for you. I believe that the best thing that we can do is to not even make G3 ROM's available to the general public. Maybe all new ROM releases should be IPL/SPL - less. If one needs a ROM that will upgrade their bootloader they'll have to request a password protected file.
I just dunno...
Click to expand...
Click to collapse
...which is one of the reasons why carriers make it so hard to flash a ROM from one carrier to the device of another.

Qtek 9100 half bricked
Hi Molski
I'm new here.Just 'd like to know if you could support me on this matter.
Here we go...
I've flashed my 9100 from wwe to esn (spanish) with the ROM 1.3.7.5 or something like this.
This is the problem...I got a power failure in the middle of the flashing process.So now the device isnt able to start up it didnt install the OS properly.
Now it says:
IPL 2.24 (i managed to flash the ipl n spl)
SPL 2.24
OS 1.3.7.5
But I'm pretty sure that there's no OS watsoever because after keep trying flashing with other ROM in bootload mode.I finally managed with an Orange of 34 mb it updated the ROM,that is the IPL And SPL and with the process was running I've noticed the screen got blank and updated it properly.I was realy happy when I saw it but even though it did it properly I still got the same problem.The pda doesnt start up.When I flashed it for the first time I did it with care,followed all the instructions,that is, unlocked the CID first etc.But had the damn joy of getting a power failure in the middle of it.
I'm just wondering if one of you would be able to gimme a light on it.I've tried everything but flashing it with a G4 ROM coz I know it wont work.
Regards
Luiz Santos
Molski[/QUOTE]

help me, after ubgrading the blue screen doesn't go

can u help me
i ubgrade my K-jam and after the ubgrading complete
the blue screen still for a minitue and then the device restart
(( does not start )) and again return to the blue screen with this numbers on it
IPL 1.01
SPL 1.01
os 2.16.9.1
only
(( without GSM ))
so what is the problem plzzzzzzzzz

no body can help me ?

blue screen
did you upgrade the rom and now its frozen if so that happened to me i download the official rom for my network which was O2 then reflashed it or you can us the wizard love rom that always gets people out of trouble
once you done that you can upgrade again i would suggest to read some of the threads on here a lot it is explained allready maybe that is why no one has replied to you

can u tell me brother which rom should i use??

the safest one people use i believe is the wizard love rom thats what i have seen i have a copy if you want
if you have on share you can add me as a friend a download it from me my id on there is easymob same as here
if you have not got on share there
http://www.onshare.com/en_gb/download/ download it if you want otherwise google it should be able to find it

8125 will not boot any more .. need some expert help

i have a 8125 that i was using with cingular / att
the other day i was doing a HARD RESET .. and thanx to my stupidity i did it as the battery was just about to DIE ..
it did .. right in the middle of the HARD RESET
i plugged the phone back in and then turned on the phone
the " splash screen " comes up ..
the numbers
it says
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.11
appear on the top left of the screen .. and that is where it stops .. it will not BOOT any further .. .. nothing works .. the only way to get the screen to shut off is to take the battery out and start the process again
I feel i have damaged the O.S system or something
can anyone give me a place to start .. or a way to begin to even attempt to fix this problem ..
thank you so much in advance to anyone who can shed some light on this problem ..

start with the Wizard Wiki and get an original ROM (form the provider) to restore phone to good condition

i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice

Sanboy said:
i dont understand
what do you mean get a ROM from the provider ? you mean go to cingular and ask them to help flash it ?
sorry .. but i dont understand your advice
Click to expand...
Click to collapse
My first advise was to read the Wiki. There you'll find a LOT of information and help on how to get it done.
You must find the same ROM that came originally with your phone. Go read and search...

ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all

Yes go to cingulars website and download the 2.25 rom release. This will allow you to flash your phone back to oem condition. Try hard resetting it again, I don't remember if you can do it from the boot loader screen but you may be able to.
Best of luck.
Jeff

Sorry, but Cingular site not exist, today is AT&T, or not?

Sanboy said:
ok .. will do
but if you do know the answer it would be alot easier just to give me a head up as to atleast
" yes the stuff you need is on our site "
or
" no .. you wont be able to do what your looking to do "
I am not a stranger to forums and i know reading is the first thing that can get you the help . but looking for a little bit of " your in the right place " is also one of the things forums are good for
so i ask again
with the problem i have described .. will i be able to fix this problem with information and files on this site ?
if a ROM from cingular must come from cingular ... then i am most likely out of luck since i have been to that rodeo already and cingular was no help at all
Click to expand...
Click to collapse
What you want is to be spoon fed and that's why is so hard to find anything in this forum: because of the huge amount of repeated posts with same questions.
I made a Google search and in less than 3 minutes and 3 sites i found the original HTC/AT&T ROM link...
http://www.america.htc.com/support/8125/software-downloads.html
geez...
EDIT:
Double posting isn't a good policy either

Help with Rolling back to Original ROM..

Ok, GUYS i am so frustrated here...i only wanted to unlock my diamond so i taught i might have to put new rom too so now i end up putting new rom..this is a brand new device..i do not need any tweaks and stuff..anyway..now i do have unlock diamond and CID Unlock but i also have FULL OF BUGS ROM...
This is what i have...
HardSPL 1.40 Olinex
Radio 1.5
ROM:-> Macadam! V1.1
Seriously this people should not be allow to put their ROMS in the forums unless they verify and sure that there are no BUGS..
Now, I want to go back to Rogers Radio and ROM and SPL..how can i go about doing that..i do not have copy of current ROM...if anyone have a copy of ROGERS ROM..plz post it and give me a instruction of putting it back...I did follow wiki to revert back but it did not work..I try to put new Stock Rom from HTC..it did not work either...can some one please help..ALL HELP will be appreciated thx..
I did lots of search to bring back the STOCK ROM and I spent two full days..but I was not succeeded..let me see the link..thx bro
Ok, I am downloading the Rogers ROM but now can I put this rom since I have HardSPL 1.40 Olinex..will there be a problem?..Another thing..I was trying to put stock rom from HTC but it did not work it was giving me an Error "ERROR 244 INVALID MODEL ID"..do you have any IDEA why is that?..I do have CID UNLOCK..So when it goes to Rainbow color screen it says "Security Unlock" on the top...

Ok man, calm down and do a search..
I had the Rogers ROM posted MONTHS ago.
http://forum.xda-developers.com/showthread.php?t=455347
hertstealer said:
Ok, GUYS i am so frustrated here...i only wanted to unlock my diamond so i taught i might have to put new rom too so now i end up putting new rom..this is a brand new device..i do not need any tweaks and stuff..anyway..now i do have unlock diamond and CID Unlock but i also have FULL OF BUGS ROM...
This is what i have...
HardSPL 1.40 Olinex
Radio 1.5
ROM:-> Macadam! V1.1
Seriously this people should not be allow to put their ROMS in the forums unless they verify and sure that there are no BUGS..
Now, I want to go back to Rogers Radio and ROM and SPL..how can i go about doing that..i do not have copy of current ROM...if anyone have a copy of ROGERS ROM..plz post it and give me a instruction of putting it back...I did follow wiki to revert back but it did not work..I try to put new Stock Rom from HTC..it did not work either...can some one please help..ALL HELP will be appreciated thx..
Click to expand...
Click to collapse

The one that you give me the link..that Rom is not Rogers Shipped ROM..and i think i might brink my Diamond...

Ok Guys..I seem to get no Luck..I posted this few weeks ago and I am still stuck with Bug Rom..Now, 1st thing I can not find Rogers Stock Rom..2nd I found a HTC Stock Rom but it will not install on my phone..it gives Error 244 "Invalid Model ID", so I do not know what to do..I was searching online to find the solution and someone said it because it is trying to overwrite the HardSPL, So I am thinking to change my 1.40 Olinex to 1.23 something but from XDA Forum it says install OS before overwriting HardSPL..any ideas..HELP PLZ..And PPL who make this Coocked ROM PLZ STOP..You ruining ppl phoneS..all I wanted to do is Unlock my phone,so i taught i might have to change ROM too so here I am stuck with messy ROM...Once Again My phone is Unlcok,its CID UNLOCK and Security Unlock..PLZ HELP

There is no STOCK rogers rom for the Diamond. Flash the one noted above, it is a COPY of the stock rom, extracted from a stock Rogers Diamond. It does not contain the SPL for Boot splash, other than that it IS a stock ROM.