Need help with my Kaiser Tytn II - Tilt, TyTN II, MDA Vario III General

Hi guys
I have a problem, im not that up to date with modding or in that dirrection , but ive been reading over several forums and different site's about making my tytn II telefoon a wireless modem , My acchievement is to play through my HSDPA connection a wireless connection to my pc, that i can recieve through a wireless reciever on my Computer, and from my conncection from my telephone and play xbox live, i know how to connect to my xbox if i have a wireless connection , and im hoping you guys know how i can make my hsdpa connection to the computer, if not wireless, then through my usb , in that dirrection , i would be more then thrilled if you guys can help me!!!!!

Search in Development & Hacking on the XDA main page. Look for Chainfire's WMWIFIRouter.

i have done that and it says that it is connected, but how do i find that connection on my pc to conect from my phone?? i have a wifi reciever but it can not find anything i need help how to connect ....

Related

Using Diamond with Car-PC via bluetooth?

Hi there,
I got a car-pc since a while and have been using my sony ericsson with it... calls get transferred via bluetooth to the computer, as like phonebook in integrated into the car-pc software... all transmitted via bluetooth...
Now with the diamond, how do i set it up as a phone? winXP doesnt recognize other services than the moden funxtion
you should enable Remote SIM access on you Diamond: Start -settings - connections bluetooth SIM acces and also activate the service for your BT connection (do this in the first tab of the BT settings dialogue after connectig)
already done :-( But the Computer doesn't list other functions than modem for the HTC
Do i need any drivers for XP? Usually not...
Using Diamond & CarPC Via Internet sharing over BT
I have a CarPC in my car, it has a 7" touch screen & it is running WinXP and have built in Bluetooth. So for surfing in the internet , MSN, Skype in my car over the carpc i am using my HTC Diamond with the Internet Sharing icon and connecting it via Bluetooth to the carPC so i get FAST Internet over Bluetooth between my carpc and my HTC Diamond.
It works very good - very stable.
Matter of fact it is "capturing" my 3G Internet and pass it over Bluetooth to the carpc.
Solution works very well.
k, but i am not interested in using it as internet connection, i want to phone via the computers hardware, so the car-pc should act as an headset... besides that, he shoult be able to access the adress book and to begin calls... that for, i neeed 2 comports emulated, but how to create them?
could it be because the device is seen as a PDA, and not as a mobile phone?
I know somewhere here on XDA there is a reg hack for earlier devices to make them appear as a mobile phone to car kits. maybe the same thing will help here. I don't know where it is, can only suggest searching, unless anyone else can point you in the right direction....
I used to have PhoneConnector on my CarPC, with PhocoAdapter on the phone. It worked, but now this software is not supported anymore and unfortunately it does not work with WM6.
Freefone is not compatible either.
My good Blackbaron, I believe we users of CarPCs and Windows Mobile are scr...d!
By the way, sharing the 3G connection workds a treat, by USB, BT, Wifi... I just wish Vodafone would allow other ports than port 80
I still didnt realize what 3G is... ^^ I never owned a ppc before...
Well, on the CarPC the internet speed is as great as a DSL line, here is France I measured it at more than 3.5 MB/s (KS20 is limited to 4 MB/s with HSDPA, who knows why). Coming from the crappy Edge Motorola phone I had before, the browsing is truly amazingly fast!
help
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Try this app called JetWare
gerardo66 said:
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Click to expand...
Click to collapse
1) Launch the Internet Sharing application on your phone (all WM6 phones have it)
2) Select your 3G connection, and BT or USB, tap "Connect"
3) USB: have ActiveSync installed on the PC, connect the USB cable, it's done.
4) BT: you have to set up a BT PAN hosted from your phone, add your PC to it, it's done.
5) If your provider uses a proxy, setup Firefox to use it (Tools/Options/Advanced/Network)
6) If your provider has a filter on User Agent, then you need the plug-in "User Agent Switcher", to put the same User Agent string as on your phone.
There you go!
zmob123 said:
Try this app called JetWare
Click to expand...
Click to collapse
Looks interesting, I'll give it a try when I have some time. Do they have a trial version?
Yes they have, i leeched it... But i don't find the difference between now and before installing it...

Bluetooth Pan

Hi All
After looking at this amazing application - http://forum.xda-developers.com/showthread.php?t=427097 - I decided to install it, works great if im using the USB wire. But my problem is that Vista wont find my Diamond to connect it to a PAN, ive followed the information on that guide.
Ive tweaked my registry, ive also ran WM6BTPAN which doesnt seem to do much.
Ive also checked my MSI Btoes drivers on my pc. Im running Vista 32bit Business and its find actually pairing with my Diamond, but when it comes to actually setting up the pan, I just get that screen (image attached).
Anyone else having this problem?? or even better anyone else know how to fix this?
Thanks
I got the same problem with xp, too.
I have an Belkin USB adapter and I even started the bluetooth network from the pc with the Belkin software... and in "network connections", the icon looks like it has a connection, but the computer isn't receiving any packages (just sending packages).
So what do I have to do so my Vario IV will connect?
...
I just found out that there is no connection between my Vario Iv and my PC:
I turned my bluetooth on my phone off and let the PC connect with the bluetooth network and it says it's connected.
So, if anyone has an anwser to this problem, please help us.
Thx

Need Help with tethering att tilt through bluetooth

I am a newbie and recently bought a att tilt.I want to connect to the internet with my laptop through bluetooth ,which i am having a hard time doing it.
I could connect through usb though using pdanet,,i dont know the steps for connecting through bluetooth,,if anyone could help that would be much appreciated..............Thanks......................
You've posted this in the ROM development thread so you may get flamed. It probably belongs in the software thread.
You can tether with bluetooth using the Internet Sharing app, where there is a pulldown menu that allows you to choose either USB or bluetooth. As long as you have paired your phone with your computer with bluetooth, all you should have to do is setup a bluetooth PAN internet connection on your computer which will depend on the bluetooth stack you have on your computer. Do a search in the software forum or on google and you'll likely find a bunch of info.
Moved to General...

Internet Sharing problems via Bluetooth

Hello, I have a problem when I try sharing my PDA's HSDPA to my Computer over Bluetooth.
I often use the Internet Sharing Option on my Diamond to get Internet on my Laptop.
Yesterday I tried the first time to share the Connection over Bluetooth (usually I use the USB)
But it doesn't work!
I open a Bluetooth PAN on my Diamond, then I connect my PC to the PAN.
Everything seams working well! My PC shows me that he is connected to the Diamond's Network Access, Signal Strength: Good, Packets are comming trough...
Now I try to open the Internet (IE 6), but he cannot reach any page! Only sometime he opens a bit of a site... But most times he tells me that there is nothing avaiable...
When I connect my Diamond then on a USB cable and I try it... it works fine...
What am I doing wrong???
P.S.: There is no Firewall, neigther an Anti-Virus
bump or whatever ? help ???
i'd also like to get the info on how to set up a pan on the diamond so i can use it with my oqo 0+
It seams like nobody has any help or anser for this? Is there anybody who shares the same problem?
you are not alone!
tho i'm far from being of any help as i have less of an idea than you!!
Diamond PAN
I have the same problem connecting using BT but it works perfectly using USB
Yep, a friend of mine has the same problems... do you think there could be a bug?
If it is in...
...Active Sync, I will try an older version just for tests
... the Diamond itself?? Don't know
... Windows, i did all Updates, nothing changed
.. Bluetooth Driver, try to update this one.
That are the things where the problem could be... Or are there any other ideas?
sharing internet?
hai,
using the internet from my HTC diamond via bleutooth pan was a breeze, just created a connection with my laptop, after that run "shared internet" and than "connecting" the phone to the internet i then connect using my laptap with bleutooth PAN network, and it always works, no problems...
odd i do all that but the pc can't connect to my diamond ! wonder if orange uk have disabled it somehow ?
quote:- after that run "shared internet"
aha this is my problem i dont have the shared internet program in my orange uk rom!
cab anyone please????
found one!
link http://forum.xda-developers.com/showthread.php?t=420433
funny how searching the forum did'nt find this???!!!
just strting my little oqo .......................
connection ...........made............opening opera..................YES WORKS!!!!!!
WWWOOOOOOHHHOOOOOOOO!!!!!! (in a very english way of course ahem!)
Need to install the original Rom I think...
But normaly it has to be there... I don't think that Orange would disable that...
But I have another problem, everything is connected, status are all ok, but I cannot open any Site, but over usb cable it works fine...

Internet through usb cable.

Hello all.
I have googled, searched xda and tried all to get internet sharing to work, via usb, but fail all the time. It is supposed to just work but does'nt. For me.
Any help please?
regards
settings->connections->connections->advanced-select network
choose my network or whatever the native network profile is called
rather then my isp or whatever your isp profile is called
should mean that when your phone is connected to activesync
or vista's sync tool
it gets the same network as the computer you're connected to
make sure you have synced your x1 with the activesync software that comes with it then try it make sure you got signal aswell cuz it will not connect without. i use vista and it connected fine it just added another network to the ones i could connect to and obvusly it was the phone so i saved it that way when i plug it in it works straight the way. hopefully this helped
just plug it in and start internet sharing on your x1
Probably want to check your PC network status>>properties>>Advanced and check on "Allow other network users to connect...."
And go to X1 settings>connections>usb to pc and clear(if any) check mark on the 'enable adv network' if having problems.
Are you trying to connect your PC to the Internet through your phone or your phone to the internet via your PC?
doesnt necessarily belong here but since people are reading this thread - how can I do the following:
My laptop is connected to landline broadband connection via cable. Now I want to start a wireless network on my computer and let my xperia connect to. When connected to the laptop ... I want the xperia to be able to use the laptops internet access as well be able to access files that I have given network permission to e.g. movies for example.
There has got to be a way of doing this. So far all i can do is create a wireless network and let my xperia connect to it .. however nothing happens after that .. I cannot access files nor the internet on my xperia
so anybody an idea how to do this ?
thanks
I think you might need a Wireless Access Point for this, although I could be wrong. I have personally never tried it, as I haven't played around with peer to peer wireless networks.
I have an Access Point at home connected to the DSL, my laptop and my X1 both connect to it and access the internet, and that works perfectly.
Sorry I am not of much help.
just create an ad hoc connection on your pc it will appear on the network list on the xperia in the properties of the ad hoc connection tick share internet or something similar
Sharing internet connection with x1
Hello guys! I need to connect my X1 via USB with my notebbok, to share the WiFi connection. The problem is that my X1 has an IP with 192.168.1.102 Ip, (From wireless), but when I connect it via USB to my PC its tooks an IP with 162.85.2.2 Ip Address.
I configured it manually, but still wont navigate trouth internet.
So I don't know hoy to configure my connection to have the same IP range with my phone from my PC.
I searched all over XDA forums, but I didn't find anything-
Please somebody can hel me please?
Regards!
Charly!
Active sync issues the IP when connected via the usb cable, leave it as it is. (ie my home wireless network for the laptop / pc / xbox etc is 192.168.0.xxx but the phone when connected to the laptop is 169.254.2.x and active sync does the routing or something). Then do what the others said about allowing the phone ot connect to the internet via active sync and it should work.
net coonectin
hey....i using SE x1i
I need to help for to connect mobile with laptop. No one pc suite are working, when i connect via USB cable i getting error of "your USB not recognize" I tried with various PC suite but nt getting success..My Laptop OS wind8 Plz help me any one....

Categories

Resources