Hi there,
I got a car-pc since a while and have been using my sony ericsson with it... calls get transferred via bluetooth to the computer, as like phonebook in integrated into the car-pc software... all transmitted via bluetooth...
Now with the diamond, how do i set it up as a phone? winXP doesnt recognize other services than the moden funxtion
you should enable Remote SIM access on you Diamond: Start -settings - connections bluetooth SIM acces and also activate the service for your BT connection (do this in the first tab of the BT settings dialogue after connectig)
already done :-( But the Computer doesn't list other functions than modem for the HTC
Do i need any drivers for XP? Usually not...
Using Diamond & CarPC Via Internet sharing over BT
I have a CarPC in my car, it has a 7" touch screen & it is running WinXP and have built in Bluetooth. So for surfing in the internet , MSN, Skype in my car over the carpc i am using my HTC Diamond with the Internet Sharing icon and connecting it via Bluetooth to the carPC so i get FAST Internet over Bluetooth between my carpc and my HTC Diamond.
It works very good - very stable.
Matter of fact it is "capturing" my 3G Internet and pass it over Bluetooth to the carpc.
Solution works very well.
k, but i am not interested in using it as internet connection, i want to phone via the computers hardware, so the car-pc should act as an headset... besides that, he shoult be able to access the adress book and to begin calls... that for, i neeed 2 comports emulated, but how to create them?
could it be because the device is seen as a PDA, and not as a mobile phone?
I know somewhere here on XDA there is a reg hack for earlier devices to make them appear as a mobile phone to car kits. maybe the same thing will help here. I don't know where it is, can only suggest searching, unless anyone else can point you in the right direction....
I used to have PhoneConnector on my CarPC, with PhocoAdapter on the phone. It worked, but now this software is not supported anymore and unfortunately it does not work with WM6.
Freefone is not compatible either.
My good Blackbaron, I believe we users of CarPCs and Windows Mobile are scr...d!
By the way, sharing the 3G connection workds a treat, by USB, BT, Wifi... I just wish Vodafone would allow other ports than port 80
I still didnt realize what 3G is... ^^ I never owned a ppc before...
Well, on the CarPC the internet speed is as great as a DSL line, here is France I measured it at more than 3.5 MB/s (KS20 is limited to 4 MB/s with HSDPA, who knows why). Coming from the crappy Edge Motorola phone I had before, the browsing is truly amazingly fast!
help
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Try this app called JetWare
gerardo66 said:
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Click to expand...
Click to collapse
1) Launch the Internet Sharing application on your phone (all WM6 phones have it)
2) Select your 3G connection, and BT or USB, tap "Connect"
3) USB: have ActiveSync installed on the PC, connect the USB cable, it's done.
4) BT: you have to set up a BT PAN hosted from your phone, add your PC to it, it's done.
5) If your provider uses a proxy, setup Firefox to use it (Tools/Options/Advanced/Network)
6) If your provider has a filter on User Agent, then you need the plug-in "User Agent Switcher", to put the same User Agent string as on your phone.
There you go!
zmob123 said:
Try this app called JetWare
Click to expand...
Click to collapse
Looks interesting, I'll give it a try when I have some time. Do they have a trial version?
Yes they have, i leeched it... But i don't find the difference between now and before installing it...
Related
I understand that it is technically posible to establish a link between the phone and a computer with Bluetooth such that you can the access the internet using the computers access.
I have had a few shots at this, and have got the correct profile appearing as an outgoing connection and established - but I cannot for love nor money make the bugger do anything.
I'm using XP pro, I have tried with and without the bridge between the local and bluetooth connection on the machine - still nothing.
When I have the connection established and go to the Wireless Manager there are no entries in the Bluetooth drop down, should there be?
Any ideas anyone?
Tom
If you are just wanting to access the internet using bluetooth then the way I did this was to set up a blutooth active sync conection, you can the access the internet from your alpine.
Sean uk said:
If you are just wanting to access the internet using bluetooth then the way I did this was to set up a blutooth active sync conection, you can the access the internet from your alpine.
Click to expand...
Click to collapse
True, lateral thinking, must try it one day!
Of course that would require me to remember to take my cradle to work for the first sync! Set a task in the phone you say, I would if the flamin thing allowed you to set the task alarm at a time of your choice, I'm nearly at work by 8 when it reminds me I've forgotten something again!
Am setting up my Tytn II with a new Toshiba Satellite Pro U300 laptop. I have no problem with syncing via USB but cannot get Windows Mobile Device Center to see the device via Bluetooth.
Half the problem may be the Toshiba Bluetooth software, which takes over the standard MS bluetooth software, although I managed to use the Tytn to share an internet connection without much fuss.
On the handset, when I pair it with the PC it sets up a COM port (COM9) and Wireless Stereo support - should it have another option under Partnership settings or something?
On the PC it sets up a dial up networking connection and a Network Access (PAN) connction, both of which seem to work fine. I can browse the Bluetooth shared folder on the phone or PC without problem, so what am I missing with regards to syncing???
Any ideas would be appreciated, but please document it clearly as I am sure I am missing something obvious.
Thanks in advance
Martin B
Try this, step by step, it worked for me perfectly!
http://forum.xda-developers.com/showthread.php?t=340954
hello,
I have an htc touch diamond and I can't use it as modem,
Mention that I have on my pc windows mobile center...
every think is work ok, the only problem is, I can't see it like a modem,
I have found some topics here, on this forum and I have trry some drivers but isn't work,
any ideeas?
thanks very much!
What have you tried? Normally, when your synced, you can start using internet on your pc/laptop by opening the "Internet Sharing" application on your Touch Diamond. After this there'll be some drivers installed on your PC, enabling Bluetooth PAN. These were the only things I need to do on my Vista workstation, after this I was able to browse the internet on my laptop using the Touch Diamond.
It's pretty fast as well, using HSDPA. I can reach download speeds up to 150KB/s! Good luck!
it is in Italian language and I don't understand it very well,
Now I have connect it yo my laptop
I will try to install English language to my phone, because I don't understand very well Italian language...
thanks a lot!!!
Milenco said:
What have you tried? Normally, when your synced, you can start using internet on your pc/laptop by opening the "Internet Sharing" application on your Touch Diamond. After this there'll be some drivers installed on your PC, enabling Bluetooth PAN. These were the only things I need to do on my Vista workstation, after this I was able to browse the internet on my laptop using the Touch Diamond.
It's pretty fast as well, using HSDPA. I can reach download speeds up to 150KB/s! Good luck!
Click to expand...
Click to collapse
Hi, like zmeutz I'm trying to setup my diamond as a modem.
Works great with IS and bluetooth PAN. But what I'm looking for is the diamond as a simple Modem.... It should be possible as when using any kind of "terminal" application over a bluetooth serial link connected to the diamond it does response to AT hayes commands....
However, when I try to use a ipaq to connect to the diamond through DUN it does not work....
I'm trying to do this for two purpose:
1/ Connect my ipaq running TTN6 so it gets traffic information from tomtom server. PAN works, but it's a pain compared to DUN. You need to activate BT on your diamond, run internet share, clik on two fields to set it up. Then click on connect to make it active. Then you need to go back to you IPAQ, before running you application, launch BT, got to settings, click on the diamond short cut for PAN. Then you can can launch your navigator on your IPAQ.... If you loose your connection, you need to start all the process again.....
While with dune, you would just need to activate bt on your phone.... The rest would be transparent as soon as you IPAQ application tries to connect to internet you get the connection...... At least it's the way it worked with my motoroal (razr).....
2/ sending faxes..... For this I need a true modem ;-).
Any ideas other that PAN?
Rgds,
JP.
HTC Touch Diamond Internet Sharing Problems
I have a HTC touch Diamond and I did as stated above but my phone asks for server information. But I have unlimited data, why doesnt it just continue on with the Evdo it has?
lol
all you need to do is install Microsoft active sync, then use the usb lead to plug in your diamond.
A menu will pop up, press internet sharing, your computer will recognize the phone as a network connection and drivers will be installed, hay presto your online
You can also use your bluetooth in the diamond and laptop.
Pair your device with the laptop, goto internet sharing, select bluetooth and connect.
Then goto (xp) Start - connect to - bluetooth pan
it will then connect to the device.
This way is slow but it works.
I have also written a guide on how to use you phone as a proper access point, search for it.
and if it doesnt appear
I've tried several times to set up my phone as a modem.
I have installed active sync on my laptop, but if i connect my Touch diamond "NO" menu pops up. Where can i find this menu? On my laptop or phone? And can anyone direct me to it. THNX
HTC Touch Diamond does not support Bluetooth DUN profile.
Its not worth the trouble. I would buy a dedicated usb modem. Only 20-30 Dollars
Hello, I have a problem when I try sharing my PDA's HSDPA to my Computer over Bluetooth.
I often use the Internet Sharing Option on my Diamond to get Internet on my Laptop.
Yesterday I tried the first time to share the Connection over Bluetooth (usually I use the USB)
But it doesn't work!
I open a Bluetooth PAN on my Diamond, then I connect my PC to the PAN.
Everything seams working well! My PC shows me that he is connected to the Diamond's Network Access, Signal Strength: Good, Packets are comming trough...
Now I try to open the Internet (IE 6), but he cannot reach any page! Only sometime he opens a bit of a site... But most times he tells me that there is nothing avaiable...
When I connect my Diamond then on a USB cable and I try it... it works fine...
What am I doing wrong???
P.S.: There is no Firewall, neigther an Anti-Virus
bump or whatever ? help ???
i'd also like to get the info on how to set up a pan on the diamond so i can use it with my oqo 0+
It seams like nobody has any help or anser for this? Is there anybody who shares the same problem?
you are not alone!
tho i'm far from being of any help as i have less of an idea than you!!
Diamond PAN
I have the same problem connecting using BT but it works perfectly using USB
Yep, a friend of mine has the same problems... do you think there could be a bug?
If it is in...
...Active Sync, I will try an older version just for tests
... the Diamond itself?? Don't know
... Windows, i did all Updates, nothing changed
.. Bluetooth Driver, try to update this one.
That are the things where the problem could be... Or are there any other ideas?
sharing internet?
hai,
using the internet from my HTC diamond via bleutooth pan was a breeze, just created a connection with my laptop, after that run "shared internet" and than "connecting" the phone to the internet i then connect using my laptap with bleutooth PAN network, and it always works, no problems...
odd i do all that but the pc can't connect to my diamond ! wonder if orange uk have disabled it somehow ?
quote:- after that run "shared internet"
aha this is my problem i dont have the shared internet program in my orange uk rom!
cab anyone please????
found one!
link http://forum.xda-developers.com/showthread.php?t=420433
funny how searching the forum did'nt find this???!!!
just strting my little oqo .......................
connection ...........made............opening opera..................YES WORKS!!!!!!
WWWOOOOOOHHHOOOOOOOO!!!!!! (in a very english way of course ahem!)
Need to install the original Rom I think...
But normaly it has to be there... I don't think that Orange would disable that...
But I have another problem, everything is connected, status are all ok, but I cannot open any Site, but over usb cable it works fine...
Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions
Not sure that Internet Connection sharing in WinMo supports that...just wondering, why the heck would you want to surf the web on a 2.8" screen when you have a full PC available to you?
You can use the remote desktop facility via wifi. But as previously posted... why?! Bluetooth doesn't support a high enough datarate for it to work properly.
Connection at my location is 3G at best so bluetooth is defininitaly fast enough to accomidate my needs just simple stuff.
metalman0581 said:
Ok I have been trying to use my pc connection and access that connection through my bluetooth on my kaiser, most I can get is the other way around. Any suggestions
Click to expand...
Click to collapse
The best way to get the connection on your kaiser throught the pc is when you connect it using the USB and being connected to the active sync on your pc besides there are no settings need to be made for using this way. I'm not sure if you can connect the kaiser to you active sync on the pc through the bluetooth.anyway let me try it and if anything pops up, i'll let you know
Nope, no additional software required. Just go into Start - Programs - Internet Sharing. Hit connect and connect up your USB cable and you're done.
_Wait for ActiveSync to connect and then exit the programme._________________
Max confusion
What a jumble this thread has become . The O/P wanted to access the internet that's already on his PC and channel that through his TyTN II - NOT the other way around. As already mentioned in one post, one way of getting this is via an Activesync (or WMDC if it's Vista or Win 7 on the PC) connection. For greatest speed this would be via the USB cable but it is possible to have an Activesync or WMDC connection via Bluetooth for greater mobility if there's a need to carry the phone up to 10 m from the bluetooth hub. The other (more straight forward) way to do this is just to connect the phone via WiFi directly to the landline/broadband router (assuming there is a WiFi capable router avail).
Internet connection sharing is only for when the phones internet connection eg GSM/3G or HSDPA is feed to a desktop PC (say if the landline/broadband connection is down). In the O/Ps second post, the reference to Bluetooth speeds made it look like this was what was being saught.
I have done all of these with my TyTN II and had things working well in each case.