OK guys,
I just had my "faulty" Diamond replaced - it wasn't ringing on calls, but all other sounds were OK. This is not the same issue that people have had with SMS notifications etc etc.
Basically only a hard reset cured the issue, but it came back after a few days.
Since using the new one I think I worked out what it could be, and it might be very embarassing.....part of it is to do with the stupid way HTC have implemented the volume behaviour in Touch Flo, and their philosophy of "why press the screen once when you can press it 3 or 4 times"! Dismissing email, missed call and SMS notifications from the Home screen anyone? - need I say more.
Anyway, the problem <I think> stems from the way they changed the volume feature. (and operator error).
In WM6.x native, if you turn the system volume off, then the ringer turns off - if you turn it up the ring stays off - BUT both volumes are seen on one screen. So it's obvious.
In Touch Flo there are 2 separate screens!! System Volume, then an Arrow left to "Ring Volume".
Anyone who has the apparent "no ringing" press the up or down volumne, then make sure you hit the arrow left for "Ring Volume".
My sample size is 1, so this maybe coincidental, but I hadn't realised it worked this way.
For those of you with the problem, please check the "Ring Volume" level and get back to us.
See the pic attached.....
Sorry to burst your bubble, but the 'no sound on calls' problem has been seen to happen when the system volume and ring volume have been at maximum. Indeed this has also been seen to happen on WM6.x native, where as you say, both levels are visible.
I was meaning the incoming calls do not ring at all- the sound when speaking still works.
Is that what you meant?
If yes then that's a pain - I was hoping it could be the end of my troubles!
This may or may not be relevant, but, I never change the volume (system or ringer - they're both set to max) and indeed I've even remapped the volume hardware buttons to other functions but on occasion I find that whilst my system volume remains on max my ringer volume has gone right down to zero.
It certainly wasn't me that did it - at least not directly through any positive action related to changing the volume anyway.
I cannot seem to reproduce this problem, and so for now it seems to occur randomly (of course I'm sure there is a definite trigger - I just haven't found it yet!).
Mathew
that is odd - whatever is causing it then, it might be ringer volume related...
This Has Solved The Problem On My Touch Diamond...will Probably Post In A Couple Of Days To Indicate Whether The Problem Has Returned...if You Don't Hear From Me In This Thread Again Then The Problem Can Been Seen As Solved For Good.
All The Best
Sid
no sound.
hi. just got my new diamond. it powered up alright, installed all the necessary apps and sounded great. I also adjusted the system and the ringer volumes to around 80% of max.
but if i use the phone after around 15 minutes, there is not sound. no audio player sound, either songs or incoming calls or sms or anything. its just dead silent.
wanted to go to the shop to have it replaced, but before that, i wonder if anyone can help me and tell if this problem can be solved myself.
i guess i will wait for a reply before going for a replacement.
ahmarismail said:
hi. just got my new diamond. it powered up alright, installed all the necessary apps and sounded great. I also adjusted the system and the ringer volumes to around 80% of max.
but if i use the phone after around 15 minutes, there is not sound. no audio player sound, either songs or incoming calls or sms or anything. its just dead silent.
wanted to go to the shop to have it replaced, but before that, i wonder if anyone can help me and tell if this problem can be solved myself.
i guess i will wait for a reply before going for a replacement.
Click to expand...
Click to collapse
Bad news mate. But that problem is slightly different to the topic - it's only the ring volume which doesn't work for me and certain other people.
All other sounds work just fine.
Phone not ringing, vibrating or flashing for incoming calls
I am also having the same problem with my Diamond. The phone is not ringing/lighting up/vibrating or anything when someone is calling me. I have tried calling my phone myself to just watch it remain black. I REALLY hope someone somewhere finds a solution to this problem, or I may just throw it against the wall
I also had the same problem with my Telus CDMA diamond - sound worked fine, then after a random amount of time after power off, there would be no sound - no ring, no mp3 audio, nothing. Sound would be restored after soft reset, but would again disappear sometime after being powered down. I tried everything to fix - reflashed various roms, SRS WOW driver, everything - no fix to be found. The only way I could prevent the sound from disappearing was to use the "not suspend power" option of S2U2 - sound was maintained but it sucked battery like crazy. So, I returned the phone for exchange - they exchanged no problem. I haven't had a problem since with the new phone.
Phone not ringing for incoming calls
I've had this problem twice in the last couple of days. After testing a few scenarios I have been able to reproduce this problem on my TD. Like other users, the problem that I was experiencing was that my TD would not ring upon an incoming call. It would flash the screen and show caller ID, but no sound. Ring volume and system volumes were both at max.
I have been using an alarm application, G-Alarm v0.6.4. This app was installed to the device memory. After setting a test alarm and cancelling it, I then called my TD and the problem was reproduced. Are any other TD owners with this bug also using G-Alarm? (I also found that the G-Alarm was not stopping by pressing "Stop", so thought it was a bit buggy.)
I could restore the phone ringer by opening Settings -> Sounds & Notifications -> Notifications. I found that my original ring tone for an incomming call had changed by itself. When I restored the ringer to my chosen ringtone, problem solved.
I uninstalled G-Alarm and so far so good.
I'm interested to see if any others with this problem are using G-Alarm or any other 3rd party alarm app.
Regards,
Paul
Paul, I also seemed to have run into the same issue with g-alarm. I say seem because although I did a hard reset the issue has persisted. The issue seems to frequently crop up when I switch sound profiles.
I've the same problem. No Sound after some call or others sounds play. When this happens and if I receive a call the others not listen my voice. This means that when audio disappear, speaker and also microphone not work, like the system can't comunicate with them. The volume control not resolve my problem. I've done HR and with nothing installed in my phone the problem come back again after few minutes. So it's not a problem of third part bad software, but htc orginal software or hardware problem.
Anyone solve it o have idea?
Thanks!
Perfect solution sickboy555 - I feel a right twit!!!!
no sound
So, for me, the Diamond is a dead brick - just good to look at, with no sound after 15 or even 10 minutes of standby.
can anyone just tell me if this type of a problem may be related to 1. Hardware, or 2. software.
I've given it to the shop from where i bought it from, but they keep on returning me the phone after a week to 10 days, telling that it's been fixed now. But the problem still persists, and I keep on giving them the brick back again and again.
Frustrated, i wonder if I can fix it myself, or just go to the shop, and throw it against the wall and count the pieces !!!!!!!!
fleabane said:
Perfect solution sickboy555 - I feel a right twit!!!!
Click to expand...
Click to collapse
glad to have helped!
I'm not sure if there is a real hardware issue as well. Are the others with the "same" problem sure they followed the guidance????
Hi Sickboy555,
yes I checked your advice but this wasn't the cause of the problem for me. As posted earlier, for me it was caused by my G-Alarm application. It's been over a month now since uninstalling G-Alarm and the problem hasn't returned since.
you are the man,thank you.
Thanks. My incoming ring tone problem has been solved.
er...sorry..wat is the solution again?? i dun really get it...
My phone has developed a strange problem whereby it no longer makes any audible tone when someone rings! If I set it to vibrate, it does indeed vibrate, but if its set to ring, its completely silent. The incoming call notification is displayed from S2U2, and I’ve tried changing the ringtone to ensure it wasn’t having difficulty finding the file, but it doesn’t seem to work. I’ve verified the volume is set to ring, but its still not working. Has anyone experienced this or able to suggest a possible fix?
6.1 stock att tilt
I have the same problem and really like some help towad this matter. see mines is a little different it rings,but it's low but once the call comes to the end of the call volume get loud like it should at the begening. i thinks the cause of this is the s2u2 on my tilt . everything works but incoming call is so low ,I do't know someone was calling until they hang up the volume comes back it's like s2u2 ver.136 muffes my ringtone untile the call end someone please take the time out and give alittle help over here plz asp.
I have the same problem too. I changed from ATT stock ROM to Garmin DK 1.2 ROM and then after a month, the phone stopped ringing for incoming calls. I upgraded the ROM to Garmin DK 2 and the problem temporarily vanished and then started again after about a month.
Does anyone know about this problem? For now, I am installing the HTC Kaiser ROM to test if that solves the problem.
random freezing
I've been having the similar issues with my tilt. It freezes and will vibrate when a call comes, but no sound and it won't stop vibrating until i soft reset. It does it randomly and sometimes it freezes before the number can be displayed so it is shown as an unknown number and i don't know who's calling because after the phone restarts the last call is not in the history. I have a few programs installed like skyfire, tcpmp, s2p, and i use my bluetooth headset at almost all times and i still can't answer with the headset on. I also have the HTC home plugin installed but it came with the windows mobile 6.1 update.
idea
Hya,
I had the same problem with my Niki and it intercame even with the Kaiser.
On Niki the problem was on WM6.0 .. after I upgraded no problem came. The "vibration freeze" never happened again and it's ringing every time.
On Kaiser the problem was in mirror. The ringing functioned well with WM6.0 and the problem came with the upgrade to WM6.1.
I can only think that the problem was that the ROM was broken but not sure.
An idea which I can gave to you to resolve a bit the problem is to install SPB phone suit where you can set ringtones to the calls, SMS, MMS and e-mails (and on newer versions maybe to many other things). It worked on my Niki `till I didn't upgraded (I didn't try it on WM6.1).
Never tried on Kayser but it worked for sure on Hermes.
Just try it, you can be sure that you don't brake anything and SPB phone suite for me was a usefull prog. Friendly interface, easy use and VERY usefull.
Have luck
Hey everyone,
I have just noticed tonight that when the phone is on silent or vibrate there is no call waiting notification, so it's pretty tough to know a second call is coming through. I take it this is the case with everyone else's X1, and isn't specific to my ROM (the new UK generic)?
If so, what's up with that bad?! A pretty bad flaw if you ask me - the calls are the fundamental function of a phone, so everything about them should be perfect in my opinion.
I had a search and saw only 1 other post about the issue, but without a resolution. I thought everyone would have been moaning about it!
Jason
I am having the exact same problem. Any solution/workaround?
Mine still goes *beep* when it's on vibrate. I'm on the original R2A0010 UK rom. What ROM are you guys using?
Mine is R2AA008 Generic UK
Just installed the latest Generic UK Rom R3AA010 clean, with no addition, same problem. Any ideas?
anybody else suffer from this or is it only my X1i?
I'm on the generic UK R2AA ROM and I have the same issue.
When on a call with the phone set to vibrate mode, there is no audible notification of waiting calls. Guess this really is a bug with the R2AA.
Actually, as I wrote above, I have this problem on the R3A rom too. Does anyone else? Any way to fix it?
Anyway i fixed the problem with Registry Editor
Anyway i fixed the problem with Registry Editor
Somehow I must have set the Incall/Incall2/Incall3 Attenuation to 0 which silent all notification sounds during a phone call.
Adjusted it to setting 5 and now the call waiting tone is way loud. Never missed a call waiting ever again
m_orion13 said:
Anyway i fixed the problem with Registry Editor
Somehow I must have set the Incall/Incall2/Incall3 Attenuation to 0 which silent all notification sounds during a phone call.
Adjusted it to setting 5 and now the call waiting tone is way loud. Never missed a call waiting ever again
Click to expand...
Click to collapse
What are the registry keys you changed in order to fix it?
Hi,
since the new ROM upgrade for Sprint Diamonds I have an annoying problem: In Sounds & Notifications I set my Phone to "Ring and Vibrate" on incoming call. Each time I do a soft reset, it sets itself back just "Ring".
It's bugging the heck out of me, since if I forget to set it again, I don't know someone is calling when it's in my pocket.
I looked at the registry and only found ways to make ring, then vibrate or visa-versa. But I need to to vibrate the whole time it rings.
Can anyone help me with this?
Thanks!
I too have the exact same problem... Any ideas yet?
Hihi,
I just recently updated my N1 to FRF83 on stock all the way and have started to experience a problem during my incoming calls and would like to ask if anyone else experiencing this as well.
Even after setting all volumes (notifications,ringing,media etc etc) to 100%, whenever I get an incoming call the phone doesn't ring and it only vibrates/LED trackball.
I've doubled checked that there isn't any contact-specific settings for ringtones and also tried using a volume control app to 100% all volumes. Also checked that its not a speaker problem cos the chosen ringtone plays alright on music players. Also tried both custom ringtones and default ringtones and there's no difference.
Been using my sister's phone to call my phone and the thing is that this situation is not consistent.
Sometimes it rings without any issue. Sometimes the ringtone rings for 3-5 secs and silences. Sometimes it does not ring while trackball/vibrate activates. Sometimes it does not ring and trackball/vibrate does not activate as well. The issue is equally inconsistent regardless of whether the phone is on standby(screen off) or active(screen on).
Thanks in advance if anyone can help
I have the same issue with the FRF91 build of Froyo. Looks like the Google forum has a bunch of people reporting this as well.
I'm going to try to go into recovery and clear the cache. If it doesn't work I'll wipe the phone and see if that fixes it.