VPN Client (cisco) - Tilt, TyTN II, MDA Vario III General

Is anyone able to reccomend a VPN client for connecting to a Cisco VPN. I have tried antha VPN but for some reason it kills my wireless connection can i cant join any AP's
Thanks
nino

Hi i too am trying to tame this beast of an issue...
still looking...
found this
http://forum.xda-developers.com/showthread.php?t=351356

I too would very much like a Cisco VPN client, and one that's fairly easy to set up where the settings correlate to my Windows client.

As far as I know, there are no Cisco VPN client for mobile devices.
However, I've successfully used a VPN Client from BlueFire Security towards a Cisco Concentrator from my previous HTC Trinity device.
/Bjørn

I managed to get a trial of the new bluefire VPN client and it works a treat
thanks!

Related

How can i connect Windows Live for Windows Mobile throug a proxy server?

Hi all,
The proxy server is used in wireless system at my work. I enabled proxy server configuration in communication manager and i can connect web sites with internet explorer.
My question is, while i am unable to connect windows live messenger, there're also no proxy configuration on it. Are tehere any way to use messenger through proxy server ?
Or, i guess Windows Live for Windows Mobile is brand application came with WM6.0. Do you know may i use old messenger versions via proxy? Or do you know any other msn client with proxy support ?
Thanks in advance for your help.
you can setup the proxy in live messenger
I couldnt find any place to enter a proxy address in messenger. Could you please tell me where can i enter the proxy?
hey, I connect through a proxy for all my internet (using tmobile usa), and I was never able to figure out how to use windows live via proxy. however to download my hotmail emails I finally found a work around. you have to upgrade ur hotmail account to hotmail plus (20 dollars/year). now u have access to pop settings and set up a new email account using those settings (not through windows live) good luck
omar
I do not care mails, i even dont use hotmail for mailing.
i need to instant messaging to keep talking with my girlfriend.
You can't use a proxy server to access WLM Service from your Pocket PC. It simply doesn't support this.
The way that the client communicates with the Messenger service greatly differs when using a proxy, and support for this is not available in the mobile client. You NEED to create a direct connection, which thus prevents you from connecting in networks where using a proxy server (HTTP or SOCKS) is mandatory.
My mobile connected to Wifi but I couldnot surf WEB cause I didn't know how to setting up
my working Proxy via port 8080.
Help me!
Same problem here, but a little diferent.
I connect to the proxy server in my office network trough wireless access point, and then it asks me for the user credentials. I put in the credentials (i have an unrestricted account, i'm one of the administrators) but then it keeps asking me for them as if i had used wrong credentials! Are there any configuration on the proxy server to accept WM6.1 connections?
Thank's!

Public IP Address??

I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Try this
I'm no pro, but had to tell the Physical address to the the tech guy at my university so he could enable my phone o use the wireless network...
... anyways, download and install a Registry Editor (I use Task Manager v2.8) you should be able to access an Ipconfig tab, where all the information is available.
I don't know if I'm in the right track.... Hope this helps? =)
jim
your pda have an ip address
using wifi router the uplink sees the routers ip
using an isp the internet sees the isp's assigned ip
http://www.ip-adress.com/
http://en.wikipedia.org/wiki/IP_address
Here is a kewl utility that is FREE.
http://www.cam.com/vxutil_pers.html
Here is the stuff it does.
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
Another good one I use is Iper Suite.
http://tonaya.com/products/iper/index.php
For casual use the first one is probably satisfactory.
IPer is worth buying for the increased functionality and has a TFTP client.
HTH
TSoma said:
I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Click to expand...
Click to collapse
200.* would be a public IP. As would 32.*
Turn off your proxy setting in the phone and do the www.whatismyip.com thing. That will get you a more meaningfull result than anything else.
When I'm on GPRS/Edge (AT&T proxy settings in force) network I get a 66.102.186.15 IP address as reported by whatismyip.com. That resolves to alpmagr1fe06-dmz.mycingular.net. Which should be a att proxy server even tho it implies by its name its on a DMZ.
When I turn off the proxy for GPRS/Edge I get 166.195.188.15 according to whatismyip.com. That IP address will not respond to ICMP commands. So I assume it is firewalled. So it seems to me that yes you CAN and DO get a public IP address, its just that address is heavily firewalled.
You've piqued my interest, tho I cannot do anymore testing at this moment.

Help with VPN

I am really struggling to connect to works vpn (pptp) with the built in vpn client in android 2.x. Is there a known bug with the vpn client connecting to pptp?

Cisco VPN on g1

Hello,
i am searching for a VPN Client on g1 .... i installed one from the market but it didnt worked with my universitiy cisco vpn. I also searched the forum but didnt found anything working. The iphone client worked with my university vpn ... is there any comparable client for android?
/edit i didnt test the froyo build-in vpn on my universities wlan but with the one from donut i couldnt connect, so if it isnt any different i would need an third-party client.
cheers

[Q] Stock IPSEC VPN Client

I'm having a helluva time getting my IPSEC/L2TP client to connect to a server that formerly worked before the 6.0 upgrade.
I found a link that appears to report a relevant bug:
https://code.google.com/p/android/issues/detail?id=194269
Does anyone know of a VPN client that works with this kind of VPN until the bug in the stock client is fixed?
Thanks!

Categories

Resources